vdubus

Vdub Binary Options SniperVX v1

Vdub Binary Options SniperVX v1
Designed for Binary Options 60 sec trading upwards
Notes on chart
Please note the signal generated are configure to be super fast on candle opening. The down side to this is signals may switch direction mid stream.
ITM candlesticks signals generated went 6/300 Losses on a 1 min chart.
the blue line indicates reversal zones. Buy / sell targets are at the next projected line TF settings to suit

Sniper series

Remove from Favorite Scripts Add to Favorite Scripts
//╭╮╱╱╭╮╭╮╱╱╭╮
//┃╰╮╭╯┃┃┃╱╱┃┃
//╰╮┃┃╭┻╯┣╮╭┫╰━┳╮╭┳━━╮
//╱┃╰╯┃╭╮┃┃┃┃╭╮┃┃┃┃━━┫
//╱╰╮╭┫╰╯┃╰╯┃╰╯┃╰╯┣━━┃
//╱╱╰╯╰━━┻━━┻━━┻━━┻━━╯
//╭━━━┳╮╱╱╱╱╱╱╱╭╮
//┃╭━╮┃┃╱╱╱╱╱╱╱┃┃
//┃┃╱╰┫╰━┳━━┳━╮╭━╮╭━━┫┃
//┃┃╱╭┫╭╮┃╭╮┃╭╮┫╭╮┫┃━┫┃
//┃╰━╯┃┃┃┃╭╮┃┃┃┃┃┃┃┃━┫╰╮
//╰━━━┻╯╰┻╯╰┻╯╰┻╯╰┻━━┻━╯
//━╯
//Vdub Binary Options SnipperVX v1 / Vdub Rejection Spike v3 intergration -
//Signal generator for Binary Options / ©Vdubus http://www.vdubus.co.uk/
study("Vdub Binary Options SniperVX  v1", overlay=true, shorttitle="Vdub_SniperBX_v1")
//
//====================channel======================
len = input(8, minval=1)
src = input(close, title="Source")
out = sma(src, len)
last8h = highest(close, 13)
lastl8 = lowest(close, 13)
bearish = cross(close,out) == 1 and close[1] > close
bullish = cross(close,out) == 1 and close[1] < close
channel2=input(false, title="Bar Channel On/Off")
ul2=plot(channel2?last8h:last8h==nz(last8h[1])?last8h:na, color=black, linewidth=1, style=linebr, title="Candle body resistance level top", offset=0)
ll2=plot(channel2?lastl8:lastl8==nz(lastl8[1])?lastl8:na, color=black, linewidth=1, style=linebr, title="Candle body resistance level bottom", offset=0)
//
//--------------------Trend colour ema------------------------------------------------//    ema trend direction trigger For Singals 1 & 2
src0 = close, len0 = input(13, minval=1, title="Trend Change EMA")
ema0 = ema(src0, len0)
plot_color = ema0 >= ema0[2]  ? lime: ema0 < ema0[2] ? red : na
plot(ema0, title="EMA", style=line, linewidth=1, color = plot_color)
//
//--Modified vyacheslav.shindin-------------------------------------------------//           Signal 1
//Configured ema signal output
slow = 8
fast = 5
vh1 = ema(highest(avg(low, close), fast), 5)
vl1 = ema(lowest(avg(high, close), slow), 8)
//
e_ema1 = ema(close, 1)
e_ema2 = ema(e_ema1, 1)
e_ema3 = ema(e_ema2, 1)
tema = 1 * (e_ema1 - e_ema2) + e_ema3
//
e_e1 = ema(close, 8)
e_e2 = ema(e_e1, 5)
dema = 2 * e_e1 - e_e2
signal = tema > dema ? max(vh1, vl1) : min(vh1, vl1)
is_call = tema > dema and signal > low and (signal-signal[1] > signal[1]-signal[2])
is_put = tema < dema and signal < high and (signal[1]-signal > signal[2]-signal[1])
 
plotshape(is_call ? 1 : na, title="BUY ARROW", color=green, text="*BUY*", style=shape.arrowup, location=location.belowbar)
plotshape(is_put ? -1 : na, title="SELL ARROW", color=red, text="*SELL*", style=shape.arrowdown)
//
//Modified - Rajandran R Supertrend----------------------------------------------------- //       Signal 2
Factor=input(1, minval=1,maxval = 000, title="Trend Transition Signal")
Pd=input(1, minval=1,maxval = 100)
Up=hl2-(Factor*atr(Pd))
Dn=hl2+(Factor*atr(Pd))
TrendUp=close[1]>TrendUp[1]? max(Up,TrendUp[1]) : Up
TrendDown=close[1]<TrendDown[1]? min(Dn,TrendDown[1]) : Dn
Trend = close > TrendDown[1] ? 1: close< TrendUp[1]? -1: nz(Trend[1],0)
 
plotarrow(Trend == 1 and Trend[1] == -1 ? Trend : na, title="Up Entry Arrow", colorup=lime, maxheight=1000, minheight=50, transp=85)
plotarrow(Trend == -1 and Trend[1] == 1 ? Trend : na, title="Down Entry Arrow", colordown=red, maxheight=1000, minheight=50, transp=85)
// Moddified [RS]Support and Resistance V0
RST = input(title='Support / Resistance length:', type=integer, defval=21)
RSTT = valuewhen(high >= highest(high, RST), high, 0)
RSTB = valuewhen(low <= lowest(low, RST), low, 0)
RT2 = plot(RSTT, color=RSTT != RSTT[1] ? na : red, linewidth=1, offset=0)
RB2 = plot(RSTB, color=RSTB != RSTB[1] ? na : green, linewidth=1, offset=0)
//
//===============================Directional Projection=======================================//
tf2 = input('1', title="Trend Projection TF / Mins/D/W")
M2 = input('ATR')
P2 = input(13.00, type=float)
W2 = input(1)
pf2 = pointfigure(tickerid, 'close', M2, P2, W2)
spfc2 = security(pf2, tf2, close)
channel3=input(false, title="Connect Projection High/Low")
p22=plot(channel3?spfc2:spfc2==nz(spfc2[1])?spfc2:na, color=blue, linewidth=2, style=linebr, title="Directional Projection", offset=0)
//----------------------------------------------------------------------//

Comments

How long should this be trades for? 1 min or 2 min?
+73 Reply
this to be used on min chart only
?
+41 Reply
MarxBabu HumayunBajwa
@HumayunBajwa, Add this for more profitability
code available here

+51 Reply
Not working more lost trades than wins.70% lost 30 % win.
+29 Reply
vdubus oliver.pfaff.581
with out prior knowledge of price action you'll fin it hard to trade using this indicator. Try FX sniper the signals are trend directional filtered.
+15 Reply
LeeAng vdubus
Hi vdubus, What do you mean by this statement. ITM candlesticks signals generated went 6/300 Losses on a 1 min0.54% chart? Is this only 6 losses or 300 losses?
+31 Reply
kking37 LeeAng
Based on what was said around it im thinking it was 300 losses but im not sure
+2 Reply
LeeAng kking37
Thats how I have it but thats not really worth much then but if its only 6 wins then one should test the reverse then? Maybe more consistant that way.
+1 Reply
Home Stock Screener Forex Screener Crypto Screener Economic Calendar How It Works Chart Features Pricing Refer a friend House Rules Help Center Website & Broker Solutions Widgets Charting Solutions Lightweight Charting Library Blog & News Twitter
Profile Profile Settings Account and Billing Refer a friend My Support Tickets Help Center Ideas Published Followers Following Private Messages Chat Sign Out