Get started

Spread

Adaptive Bollinger Bands [by Oberlunar]Adaptive Bollinger Bands by Oberlunar extends a classical Bollinger-style framework by building structured envelopes on highs and lows and then interpreting them through flow and regime context rather than through band touches alone. The script combines two moving-average bases, adaptive volume-distribution logic above and below price, a normalized TRIX component, and a multi-timeframe directional filter to distinguish between mean-reversion conditions and breakout conditions in a more organized way. Its original value is not in any single component taken in isolation, but in the way these elements are fused into one coherent visual system. The bands define the price structure, the heatmap and tape show where directional pressure is stronger, the regime engine helps separate quieter rejection environments from more persistent expansion, and the support, resistance, and compression areas help mark zones where market behavior becomes more interpretable. The indicator is designed to be read directly on standard charts. It does not use future-looking logic, and higher-timeframe requests are made with no lookahead. It is meant as a decision-support tool for chart reading, not as a promise of performance or as a substitute for risk management. A common way to use the script is to observe how price behaves when it reaches the outer parts of the envelope and then compare that location with the active regime, the side-specific flow, and the multi-timeframe bias. In quieter conditions, signals near the edge of the channel can be interpreted as possible rejection areas. In stronger directional conditions, the same area can instead be read as part of a continuation or breakout sequence. The heatmap and tape help show whether pressure is building above or below price, while the marked zones can help the user keep track of relevant local structure. Enjoy by Oberlunar ✦👁
Pine Script® indicator
by oberlunar_tr
Carry MonitorMost traders look only at price. Professionals look at the curve. Carry is the price difference between the front futures contract (F1) and the next contract (F2). It reflects whether the market is in: Backwardation — near-term supply tightness Contango — storage, financing, or excess supply When carry is annualized, it becomes comparable across commodities and time, revealing how aggressively the curve is pricing forward expectations. This indicator visualizes: Annualized F1–F2 carry over time Backwardation / Contango regimes Structure steepening or flattening 1Y structural extremes Key contract and spread statistics Carry helps answer: Is the market structurally tight or loose? Is the curve strengthening or weakening? Are we near structural extremes? This tool is designed for education and structure awareness — not signals.
Pine Script® indicator
by QuantNomad
TICK Arbitrage Toolkit [LuxAlgo]The TICK Arbitrage Toolkit is a specialized institutional internal analysis tool designed to track market breadth and identify high probability reversal zones through TICK and TICKQ index monitoring. It provides real time visualization of market sentiment and internal extremes to assist traders in index scalping and mean reversion strategies. 🔶 USAGE The indicator identifies three distinct extension levels to signal when market internals are reaching extreme overbought or oversold conditions. Traders use these extensions to anticipate potential price exhausts or trend reversals in major indices like the S&P 500 or Nasdaq 100. The toolkit maps the NYSE TICK or NASDAQ TICKQ values directly onto the price chart by colorizing bars and providing visual markers. A gradient system transitions bar colors based on the intensity of the TICK value, allowing for a clear interpretation of internal momentum without needing a separate pane. 🔹 Extension Levels The script utilizes three configurable extension levels (defaulting to 800, 1000, and 1200) to categorize the strength of the internal move. Extension 1: Displays a single marker and begins tracking for new session highs or lows. Extension 2: Displays two vertical markers to indicate increasing internal pressure. Extension 3: Displays three vertical markers and reaches maximum color opacity, signaling an extreme arbitrage opportunity. 🔹 Session Tracking The toolkit automatically tracks the session high and low for the selected TICK source. When the market reaches a New High of Day (NHOD) or New Low of Day (NLOD) in the internals, a professional label is printed to highlight the breakout. 🔶 DETAILS The toolkit includes a Refresh Frequency setting that allows the script to process data at a higher resolution than the chart timeframe. By selecting a sub minute frequency such as 1S or 5S, the indicator can react to internal spikes that occur within a single chart bar. The Include High/Low Extremes feature ensures that brief intrabar spikes are captured. Rather than only looking at the close of the TICK bar, the script evaluates the high and low to find the maximum magnitude, providing a more accurate representation of true market stress. 🔶 SETTINGS 🔹 Settings TICK Source: Select between NYSE TICK for S&P 500 analysis or NASDAQ TICKQ for Nasdaq 100 analysis. Refresh Frequency: Determines how often the internal data is sampled. Lower values provide more granular intrabar detail. Include High/Low Extremes: When enabled, the script uses the absolute highest or lowest value within the sampling period to capture spikes. Extension 1, 2, 3: Numeric thresholds for the three levels of arbitrage intensity. 🔹 Style Positive TICK Color: The color used for positive internal readings (typically associated with overbought/reversal zones). Negative TICK Color: The color used for negative internal readings (typically associated with oversold/reversal zones). Marker Style: Choose between Circles, Triangles, or None for the extension level markers. 🔹 Dashboard Dashboard: Toggles the visibility of the on screen data table. Position: Moves the dashboard to different corners of the chart. Size: Adjusts the scale of the dashboard text and cells.
Pine Script® indicator
by LuxAlgo
Fair Interest Rate Ladder (Auto + Info)Description: The Fair Interest Rate Ladder indicator is designed to visualize the "fair value" of interest rate instruments (bond futures, rate swaps, etc.), accounting for accrued interest or carry costs. It plots a step-line that converges toward a target base point as the expiration date approaches. Key Features: Auto-Spread Detection: The indicator automatically detects if you are using a spread formula (e.g., ZN1!-100). If detected, the anchor point automatically shifts from 100 to 0. Adjustable Rate & Direction: Easily set the annual percentage rate and choose the price convergence direction (upward or downward toward expiration). Leap Year Accuracy: Mathematically precise calculations based on the actual number of days in the current year (365 or 366). Dashboard: A real-time table in the top-right corner displays the exact Fair Value and the countdown of days remaining until expiration. Expiration Tracking: A distinct red "zero line" and a visual label marking the contract's end date. How to use: Input the start and expiration dates of your contract, set the current interest rate, and the indicator will show where the price should theoretically be trading today. Russian (Русский) Описание: Индикатор Fair Interest Rate Ladder предназначен для визуализации «справедливой стоимости» процентных инструментов (фьючерсов на облигации, ставки) с учетом накопленного купона или процентного дохода. Он строит ступенчатую линию, которая стремится к целевой точке (базе) по мере приближения даты экспирации. Основные возможности: Автоматика для спредов: Индикатор автоматически определяет, используете ли вы формулу спреда (например, ZN1!-100). В этом случае точка нуля автоматически смещается со 100 на 0. Гибкая настройка ставки: Возможность задать годовую процентную ставку и направление движения цены (вверх или вниз к экспирации). Учет високосных лет: Математически точный расчет на базе количества дней в текущем году (365 или 366). Инфо-панель: В правом верхнем углу отображается таблица с текущим расчетным значением Fair Value и счетчиком дней до экспирации. Визуализация экспирации: Четкая красная линия «горизонта» и метка даты окончания контракта. Как использовать: Введите дату начала и дату экспирации вашего контракта, укажите актуальную ставку, и индикатор покажет, где должна находиться цена сегодня относительно её теоретического идеала.
Pine Script® indicator
by Another363
Arbitrage Matrix [LuxAlgo]The Arbitrage Matrix is a follow-up to our Arbitrage Detector that compares the spreads in price and volume between all the major crypto exchanges and forex brokers for any given asset. It provides traders with a comprehensive view of the entire marketplace, revealing hidden relationships among different exchanges for the same asset and offering easy, visual comparisons. 🔶 USAGE Arbitrage is the practice of taking advantage of price differences for the same asset across different markets. Arbitrage traders look for these discrepancies to profit from buying where it’s cheaper and selling where it’s more expensive to capture the spread. For begginers this tool is a clear snapshot of how different markets value the same asset, making global price dynamics easy to grasp. For advanced traders it is a powerful scanner for arbitrage setups, helping you identify where the biggest opportunities lie in real time. Arbitrage opportunities are often short‑lived, but they can be highly profitable. By showing you where spreads exist, this tool helps traders: Understand market inefficiencies Avoid trading at unfavorable prices Identify potential profit opportunities across exchanges By default, the tool searches all the enabled sources for the asset in the chart. It uses crypto exchanges as sources for crypto assets and forex brokers for all other assets. The data is displayed on a dashboard, which is the tool's only visual element. Traders can enable or disable any exchange or broker from the settings panel. All are enabled by default. 🔹 Displayable Data Traders can choose from four types of data to display: last price, last volume, average price, and average volume. Note that price and volume data may not be available for all assets at all sources, and sources without data will not be displayed. As the image shows, each chart displays a different type of data for the same asset. In this case, the asset is ETHUSDT. 🔹 Reading the Matrix Traders must read the data in a row-by-column format, as shown in the following example. Assume that we are charting BTCUSDT Daily. In the row, we have Exchange A; in the column, we have Exchange B. The data is the average price, and the value is 100. The default length for the average is 20. It reads like this: The average BTCUSDT price over the last 20 days is $100 higher on Exchange A than on Exchange B. If the value were -100, it would mean that the average price is $100 lower in Exchange A than in Exchange B. 🔹 Matrix Style Traders can change the colors and disable the background gradient, which is enabled by default. They can also fine-tune the location and dashboard size from the settings panel. 🔶 SETTINGS Sources: Choose between crypto exchanges, forex brokers, or automatic selection based on the asset in the chart. Average Length: Select the length for the price and volume averages. Crypto Exchanges: Enable or disable any available exchange. Forex Brokers: Enable or disable any available broker. 🔹 Dashboard Data: Select the data to display. Position: Select the dashboard location. Size: Select the dashboard size. 🔹 Style Bullish: Select bullish color. Bearish: Select bearish color. Background Gradient: Enable background gradient color.
Pine Script® indicator
by LuxAlgo
4
IV Rank & Percentile Suite V1.0What This Indicator Does The IV Rank & Percentile Suite provides the volatility context options traders need to time entries. It calculates two complementary metrics—IV Rank and IV Percentile—using historical volatility as a proxy, then displays clear visual zones to identify favorable conditions for premium selling strategies. Stop guessing if volatility is "high" or "low." This indicator tells you exactly where current volatility sits relative to recent history. The Two Metrics Explained IV Rank (0-100) Measures where current volatility sits within its 52-week high-low range. IV Rank = (Current HV - 52w Low) / (52w High - 52w Low) × 100 70 means current volatility is 70% of the way between the yearly low and high Sensitive to extreme spikes (a single high reading affects the range) IV Percentile (0-100) Measures what percentage of days in the lookback period had lower volatility than today. IV Percentile = (Days with lower HV / Total days) × 100 70 means volatility was lower than today on 70% of days in the past year More stable, less affected by outlier spikes Why Both? IV Rank reacts faster to volatility changes. IV Percentile is more stable and statistically robust. When both agree (e.g., both above 50), you have stronger confirmation. Divergence between them can signal transitional periods. Zone System The indicator divides readings into three zones: Zone ------- Default Range ---- Meaning ------------------ Premium Selling 🟢 High ≥ 50 Elevated volatility Favorable 🟡 Neutral 25-50 Normal volatility Selective 🔴 Low ≤ 25 Compressed volatility Avoid An additional Extreme threshold (default 75) highlights prime conditions when volatility is significantly elevated. Zone thresholds are fully customizable in settings. How to Use It For Premium Sellers (Iron Condors, Credit Spreads, Strangles) Wait for IV Rank to enter the green zone (≥50) Confirm IV Percentile agrees (also elevated) Enter premium selling positions when both metrics align Avoid initiating new positions when in the red zone For Premium Buyers (Long Options, Debit Spreads) Low IV Rank/Percentile means cheaper options Red zone can favor directional debit strategies Avoid buying premium when both metrics are in the green zone General Principle: Sell premium when volatility is high (it tends to revert to mean). Buy premium when volatility is low (if you have a directional thesis). Inputs Volatility Calculation HV Period — Lookback for historical volatility calculation (default: 20) Trading Days/Year — 252 for stocks, 365 for crypto Lookback Periods IV Rank Lookback — Period for high/low range (default: 252 = 1 year) IV Percentile Lookback — Period for percentile calculation (default: 252) Zone Thresholds High IV Zone — Readings above this are highlighted green (default: 50) Low IV Zone — Readings below this are highlighted red (default: 25) Extreme High — Threshold for "prime" conditions alert (default: 75) Display Options Toggle IV Rank, IV Percentile, and raw HV display Show/hide zone backgrounds Show/hide info panel Panel position selection Info Panel The panel displays: Field ------- Description IV Rank ------- Current reading with color coding IV Pctl ------- Current percentile with color coding HV 20d ------- Raw historical volatility percentage 52w Range ------- Lowest to highest HV in lookback period Zone ------- Current zone status Premium ------- Signal quality for premium selling Lookback ------- Days used for calculations R/P Spread ------- Difference between Rank and Percentile Alerts Six alerts are available: Zone Transitions IV Entered High Zone — Favorable for premium selling IV Reached Extreme Levels — Prime conditions IV Dropped to Low Zone — Caution for premium sellers Threshold Crosses IV Rank Crossed Above High Threshold IV Rank Crossed Below Low Threshold IV Percentile Above 75 IV Percentile Below 25 Set up alerts to get notified when conditions change without watching charts. Technical Notes Volatility Calculation Method This indicator uses close-to-close historical volatility as an IV proxy: Calculate log returns: ln(Close / Previous Close) Take standard deviation over HV Period Annualize: multiply by √(Trading Days) This method correlates well with implied volatility for most liquid instruments. On highly liquid options underlyings (SPY, QQQ, major stocks), HV and IV tend to move together, making this a reliable proxy for IV Rank analysis. Non-Repainting All calculations use confirmed bar data. Values are fixed once a bar closes. Lookback Requirement The indicator needs sufficient history to calculate accurately. For a 252-day lookback, ensure your chart has at least 300+ bars of data. Best Used On ETFs: SPY, QQQ, IWM, DIA Indices: SPX, NDX High-volume stocks: AAPL, TSLA, NVDA, AMD, META Timeframe: Daily (recommended), Weekly for longer-term view The indicator works on any instrument but is most meaningful on underlyings with active options markets. Important Notes ⚠️ This indicator uses historical volatility as a proxy for implied volatility. While HV and IV are correlated, they are not identical. For precise IV data, consult your options broker's platform. ⚠️ High IV Rank does not guarantee profitable premium selling. It indicates favorable conditions, not guaranteed outcomes. Position sizing and risk management remain essential. ⚠️ Past volatility patterns do not guarantee future behavior. Volatility regimes can shift, and historical ranges may not predict future ranges. Suggested Workflow Add to daily chart of your preferred underlying Set up alert for "IV Entered High Zone" When alerted, check both IV Rank and IV Percentile If both elevated, evaluate premium selling opportunities Use your broker's actual IV data for final entry decisions Questions? Leave a comment below.
Pine Script® indicator
by VolForge
2
FX Rate Bias US vs EU 2YFX Rate Bias – US vs EU (2Y) This indicator implements a rate-differential based macro bias model using the 2-year government bond yield spread between the United States and Germany. The methodology focuses on the short end of the yield curve, which primarily reflects central bank expectations rather than long-term inflation or risk premiums. By applying light smoothing and a zero-line regime framework, the script classifies market conditions into USD rate advantage or EUR rate advantage states. Calculation logic: Retrieves daily 2Y sovereign yields for the US and Germany Computes the yield differential (US − DE) Applies optional smoothing to reduce noise Uses the zero line as a regime boundary to define relative monetary bias Practical use: This tool is designed to provide directional macro context for FX analysis, particularly for EURUSD. It helps traders align technical setups with prevailing interest rate expectations, and is not intended as a standalone signal or timing indicator.
Pine Script® indicator
by emiurz
FX Rate Bias US vs EU 2YFX Rate Bias – US vs EU (2Y) This indicator provides a macro bias framework for FX markets by tracking the 2-year government bond yield differential between the United States and Germany. Rather than displaying the spread as a raw calculation, the script translates interest-rate expectations into a clear directional bias, helping traders understand which currency currently holds a rate advantage. The 2Y segment of the yield curve is highly sensitive to: Central bank expectations Forward guidance Shifts in short-term monetary policy outlook How to use Positive spread → USD rate advantage Negative spread → EUR rate advantage Designed to be used as a contextual macro tool, this indicator helps align technical setups with broader monetary conditions. It is not intended as a standalone entry or signal generator.
Pine Script® indicator
by emiurz
Arbitrage Detector [LuxAlgo]The Arbitrage Detector unveils hidden spreads in the crypto and forex markets. It compares the same asset on the main crypto exchanges and forex brokers and displays both prices and volumes on a dashboard, as well as the maximum spread detected on a histogram divided by four user-selected percentiles. This allows traders to detect unusual, high, typical, or low spreads. This highly customizable tool features automatic source selection (crypto or forex) based on the asset in the chart, as well as current and historical spread detection. It also features a dashboard with sortable columns and a historical histogram with percentiles and different smoothing options. 🔶 USAGE Arbitrage is the practice of taking advantage of price differences for the same asset across different markets. Arbitrage traders look for these discrepancies to profit from buying where it’s cheaper and selling where it’s more expensive to capture the spread. For begginers this tool is an easy way to understand how prices can vary between markets, helping you avoid trading at a disadvantage. For advanced traders it is a fast tool to spot arbitrage opportunities or inefficiencies that can be exploited for profit. Arbitrage opportunities are often short‑lived, but they can be highly profitable. By showing you where spreads exist, this tool helps traders: Understand market inefficiencies Avoid trading at unfavorable prices Identify potential profit opportunities across exchanges As we can see in the image, the tool consists of two main graphics: a dashboard on the main chart and a histogram in the pane below. Both are useful for understanding the behavior of the same asset on different crypto exchanges or forex brokers. The tool's main goal is to detect and categorize spread activity across the major crypto and forex sources. The comparison uses data from up to 19 crypto exchanges and 13 forex brokers. 🔹 Forex or Crypto The tool selects the appropriate sources (crypto exchanges or forex brokers) based on the asset in the chart. Traders can choose which one to use. The image shows the prices and volumes for Bitcoin and the euro across the main sources, sorted by descending average price over the last 20 days. 🔹 Dashboard The dashboard displays a list of all sources with four main columns: last price, average price, volume, and total volume. All four columns can be sorted in ascending or descending order, or left unsorted. A background gradient color is displayed for the sorted column. Price and volume delta information between the chart asset and each exchange can be enabled or disabled from the settings panel. 🔹 Histogram The histogram is excellent for visualizing historical values and comparing them with the asset price. In this case, we have the Euro/U.S. Dollar daily chart. As we can see, the unusual spread activity detected since 2016, with values at or above 98%, is usually a good indication of increased trader activity, which may result in a key price area where the market could turn around. By default, the histogram has the gradient and smoothing auto features enabled. The differences are visible in the chart above. On top is an adaptive moving average with higher values for unusual activity. At the bottom is an exponential moving average with a length of 9. The differences between the gradient and solid colors are evident. In the first case, the colors are in sync with the data values, becoming more yellow with higher values and more green with lower values. In the second case, the colors are solid and only distinguish data above or below the defined percentiles. 🔶 SETTINGS Sources: Choose between crypto exchanges, forex brokers, or automatic selection based on the asset in the chart. Average Length: Select the length for the price and volume averages. 🔹 Percentiles Percentile Length: Select the length for the percentile calculation, or enable the use of the full dataset. Enabling this option may result in runtime errors due to exceeding the allotted resources. Unusual % >: Select the unusual percentile. High % >: Select the high percentile. Typical % >: Select the typical percentile. 🔹 Dashboard Dashboard: Enable or disable the dashboard. Sorting: Select the sorting column and direction. Position: Select the dashboard location. Size: Select the dashboard size. Price Delta: Show the price difference between each exchange and the asset on the chart. Volume Delta: Show the volume difference between each exchange and the asset on the chart. 🔹 Style Unusual: Enable the plot of the unusual percentile and select its color. High: Enable the plot of the high percentile and select its color. Typical: Enable the plot of the typical percentile and select its color. Low: Select the color for the low percentile. Percentiles Auto Color: Enable auto color for all plotted percentiles. Histogram Gradient: Enable the gradient color for the histogram. Histogram Smoothing: Select the length of the EMA smoothing for the histogram or enable the Auto feature. The Auto feature uses an adaptive moving average with the data percent rank as the efficiency ratio.
Pine Script® indicator
by LuxAlgo
7
Index Construction Tool🙏🏻 The most natural mathematical way to construct an index || portfolio, based on contraharmonic mean || contraharmonic weighting. If you currently traded assets do not satisfy you, why not make your own ones? Contraharmonic mean is literally a weighted mean where each value is weighted by itself. ... Now let me explain to you why contraharmonic weighting is really so fundamental in two ways: observation how the industry (prolly unknowably) converged to this method, and the real mathematical explanation why things are this way. How it works in the industry. In indexes like TVC:SPX or TVC:DJI the individual components (stocks) are weighted by market capitalization. This market cap is made of two components: number of shares outstanding and the actual price of the stock. While the number of shares holds the same over really long periods of time and changes rarely by corporate actions , the prices change all the time, so market cap is in fact almost purely based on prices itself. So when they weight index legs by market cap, it really means they weight it by stock prices. That’s the observation: even tho I never dem saying they do contraharmonic weighting, that’s what happens in reality. Natural explanation Now the main part: how the universe works. If you build a logical sequence of how information ‘gradually’ combines, you have this: Suppose you have the one last datapoint of each of 4 different assets; The next logical step is to combine these datapoints somehow in pairs. Pairs are created only as ratios , this reveals relationships between components, this is the only step where these fundamental operations are meaningful, they lose meaning with 3+ components. This way we will have 16 pairs: 4 of them would be 1s, 6 real ratios, and 6 more inverted ratios of these; Then the next logical step is to combine all the pairs (not the initial single assets) all together. Naturally this is done via matrices, by constructing a 4x4 design matrix where each cell will be one of these 16 pairs. That matrix will have ones in the main diagonal (because these would be smth like ES/ES, NQ/NQ etc). Other cells will be actual ratios, like ES/NQ, RTY/YM etc; Then the native way to compress and summarize all this structure is to do eigendecomposition . The only eigenvector that would be meaningful in this case is the principal eigenvector, and its loadings would be what we were hunting for. We can multiply each asset datapoint by corresponding loading, sum them up and have one single index value, what we were aiming for; Now the main catch: turns out using these principal eigenvector loadings mathematically is Exactly the same as simply calculating contraharmonic weights of those 4 initial assets. We’re done here. For the sceptics, no other way of constructing the design matrix other than with ratios would result in another type of a defined mean. Filling that design matrix with ratios Is the only way to obtain a meaningful defined mean, that would also work with negative numbers. I’m skipping a couple of details there tbh, but they don’t really matter (we don’t need log-space, and anyways the idea holds even then). But the core idea is this: only contraharmonic mean emerges there, no other mean ever does. Finally, how to use the thing: Good news we don't use contraharmonic mean itself because we need an internals of it: actual weights of components that make this contraharmonic mean, (so we can follow it with our position sizes). This actually allows us to also use these weights but not for addition, but for subtraction. So, the script has 2 modes (examples would follow): Addition: the main one, allows you to make indexes, portfolios, baskets, groups, whatever you call it. The script will simply sum the weighted legs; Subtraction: allows you to make spreads, residual spreads etc. Important: the script will subtract all the symbols From the first one. So if the first we have 3 symbols: YM, ES, RTY, the script will do YM - ES - RTY, weights would be applied to each. At the top tight corner of the script you will see a lil table with symbols and corresponding weights you wanna trade: these are ‘already’ adjusted for point value of each leg, you don’t need to do anything, only scale them all together to meet your risk profile. Symbols have to be added the way the default ones are added, one line : one symbol. Pls explore the script’s Style setting: You can pick a visualization method you like ! including overlays on the main chart pane ! Script also outputs inferred volume delta, inferred volume and inferred tick count calculated with the same method. You can use them in further calculations. ... Examples of how you can use it ^^ Purple dotted line: overlay from ICT script, turned on in Style settings, the contraharmonic mean itself calculated from the same assets that are on the chart: CME_MINI:RTY1! , CME_MINI:ES1! , CME_MINI:NQ1! , CBOT_MINI:YM1! ^^ precious metals residual spread ( COMEX:GC1! COMEX:SI1! NYMEX:PL1! ) ^^ CBOT:ZC1! vs CBOT:ZW1! grain spread ^^ BDI (Bid Dope Index), constructed from: NYSE:MO , NYSE:TPB , NYSE:DGX , NASDAQ:JAZZ , NYSE:IIPR , NASDAQ:CRON , OTC:CURLF , OTC:TCNNF ^^ NYMEX:CL1! & ICEEUR:BRN1! basket ^^ resulting index price, inferred volume delta, inferred volume and inferred tick count of CME_MINI:NQ1! vs CME_MINI:ES1! spread ... Synthetic assets is the whole new Universe you can jump into and never look back, if this is your way ... ∞
Pine Script® indicator
by gorx1
Spot-Futures SpreadSpot-Futures Spread Indicator A comprehensive indicator that automatically calculates and visualizes the percentage spread between spot and perpetual futures prices across multiple exchanges. Key Features: Automatic Exchange Detection - Automatically detects your current exchange and finds the corresponding spot/futures pair Smart Fallback System - If the counterpart isn't available on your exchange, it automatically searches across 7+ major exchanges (Binance, Bybit, OKX, Gate.io, MEXC, KuCoin, HTX) and uses the first valid match Multi-Exchange Support - Works with 14 exchanges including Binance, Bybit, OKX, MEXC, BitGet, Gate.io, KuCoin, and more Clear Exchange Attribution - Shows exactly which exchanges are providing spot and futures data in the statistics table Configurable Moving Average - Track the average spread with customizable period Standard Deviation Bands - Identify unusual spread conditions with Bollinger-style bands Built-in Alerts - Get notified when spread crosses bands or zero (parity) Statistics Table - Real-time stats showing current spread, MA, std dev, and bands Manual Override Options - Advanced users can manually specify exchanges and symbols How It Works: The indicator calculates the spread as: (Futures Price - Spot Price) / Spot Price × 100 Positive spread = Futures trading at a premium (contango) Negative spread = Futures trading at a discount (backwardation) Zero = Parity between spot and futures Use Cases: Funding Rate Analysis - Correlates with perpetual funding rates Arbitrage Opportunities - Identify significant spot-futures divergences Market Sentiment - Premium/discount indicates bullish/bearish positioning Cross-Exchange Analysis - Compare spreads when spot and futures are on different exchanges Smart Features: Works whether you're viewing a spot or futures chart Automatically handles exchange-specific perpetual contract naming (.P, PERP, SWAP, etc.) Color-coded visualization (green for premium, red for discount) Customizable colors and display options Background shading based on spread direction Perfect For: Crypto traders monitoring funding rates, arbitrage traders, market makers, and anyone interested in spot-futures dynamics across multiple exchanges. Getting Started: Simply add the indicator to any spot or perpetual futures chart. It will automatically detect the exchange and find the corresponding pair. The statistics table shows which exchanges are being used for maximum transparency. Note: The indicator automatically ignores invalid symbols, so you'll never see errors even if a specific pair doesn't exist on a particular exchange. Kudos to @AlekMel that made the "Spot - Fut Spread v2" indicator that I enhance the Automatic detection feature which was not working in some case.
Pine Script® indicator
by sharkonet
Contango/Backwardation Monitor This is an indicator to display the spread difference between two products. I designed it around VX1! and VX2! but any other two products can be chosen. It is a simple subtraction of VX2-VX1. I will go through the options first and what they do followed by what contango/backwardation is in my own words. You will need the data package for VX futures for the default version to work. INPUTS -Apply Smoothing: choose to apply smoothing or not. -Smoothing Method: choose between SMA,EMA,WMA, etc. -Line Width: Width of line if line is chosen style(can be changed in style section) -Threshold 1-5: This is the level at which the line will change colors(defaults are for VX) -Color 1-5: The color the line will change to when crossing threshold. Towards Backwardation: Background color change when line is slanted down Towards Contango: Background color change when line is slanted up Bars to Confirm Trend: This is my method to cut down on background color changes. It is how many bars consecutive going back needed to change color. STYLE -All colors and whatnot can be changed here(threshold colors can be changed here or on the input page). T1 Line-T5 line: These are simple horizontal lines that can be used to denote threshold areas or whatever you want. Contango/Backwardation-These terms are used mostly with futures to define the calendar spread between two contracts. Contango is when that spread is is getting longer and backwardation is when that spread is closing. In terms of VIX futures, Contango would imply that volatility is stabilizing and the S and P will likely gain. Backwardation, woudl eb the opposite. The most simple way to read this indicator with default settings- If the line is up, red, and the background is red, then you can assume S and P prices are going down. And if the opposite is true, then prices are likely going up. Please feel free to ask any questions and I will do my best to answer them.
Pine Script® indicator
by NoMorePaperTrading
4
NDX Ladder → Adjusted to Active Ticker (5s & 10s)This indicator allows you to a grid of NDX levels directly on the NQ! (E-mini NASDAQ 100 Futures) chart, automatically adjusting for the spread between NDX and NQ1!. This is particularly useful for traders who perform technical analysis on SPX but execute trades on NQ1!. Features: Renders every 5 and 10 points steps of the NDX in your current chart. The script adjusts these levels in real-time based on the current spread between NDX and NQ / MNQ Plots updated horizontal lines that move with the spread
Pine Script® indicator
by alejandroveronn
Volume Spread Candle█ Overview Volume Spread Candle is a Solid tool for VSA (Volume Spread Analysis). █ Setting please put on VSCandle above the candle chart. █ Features Candle color reflect volume size. Back ground color reflect Spread size. Warning Volume is relatively large volume compared to the Volume flow (up volume MA - down volume MA). Yellow square mark appears when Warning volume. Volume Density is Volume / Spread. Yellow circle mark appears when large Volume Density. █ Usage Abnormal Volume and Spread hint what about to happen.
Pine Script® indicator
by akutsusho
6
SPX Ladder → Adjusted to Active Ticker (5s & 10s)This indicator allows you to a grid of SPX levels directly on the ES1! (E-mini S&P 500 Futures) chart, automatically adjusting for the spread between SPX and ES1!. This is particularly useful for traders who perform technical analysis on SPX but execute trades on ES1!. Features: Renders every 5 and 10 points steps of the SPX in your current chart. The script adjusts these levels in real-time based on the current spread between SPX and ES1! Plots updated horizontal lines that move with the spread Supports Multiple Tickers, ES1!, SPY and SPX500USD. Ideal for futures traders who want SPX context while trading ES1!.
Pine Script® indicator
by alejandroveronn
Dual Custom Index with SpreadDual Custom Index with Spread Create powerful custom indices from any instruments and analyze their relative strength dynamics Overview This advanced indicator allows you to build two completely customizable indices from your choice of instruments and analyze their spread relationship. Perfect for inter-market analysis, sector rotation strategies, currency strength comparisons, and sophisticated relative performance studies. Key Features 🔧 Fully Customizable Index Construction Build each index from up to 6 instruments with individual weightings Enable/disable instruments on the fly without losing settings Automatic weight validation ensures mathematically accurate calculations Invert functionality for instruments that move opposite to index strength 📊 Advanced ADX-Based Methodology Uses sophisticated ADX +DI/-DI directional bias calculations Normalized bias calculation for consistent scaling across different instruments Optimized default settings for intraday trading with full customization options Professional-grade smoothing and filtering options 📈 Dual Analysis Modes Difference Mode: Shows absolute strength difference (Index1 - Index2) Ratio Mode: Shows relative performance ratio (Index1 / Index2) Additional spread smoothing for cleaner signals 🎨 Professional Display Options Custom labels with full color, size, and positioning control Dynamic "Follow Line" labels that move with your data Static corner positioning for reference displays Clean error messaging and validation feedback Use Cases Gold Trading: Create gold strength vs USD strength indices for precise market timing Sector Analysis: Compare technology vs financial sector strength for rotation strategies Currency Strength: Build custom currency baskets for advanced forex analysis Commodity Spreads: Analyze relative strength between different commodity groups Regional Markets: Compare strength between different geographical market indices Crypto Analysis: Track relative performance between different cryptocurrency sectors Technical Specifications Instruments per Index: Up to 6 with individual enable/disable Weight Validation: Automatic 100% total weight enforcement Calculation Method: ADX-based directional bias with trend strength weighting Smoothing Options: Multiple levels of customizable smoothing Error Handling: Professional validation with clear user feedback Optimization Tips Intraday Trading: Use DI Length 3-7 for faster response Daily Analysis: Use DI Length 10-14 for smoother signals Noisy Markets: Increase Final Smoothing for cleaner signals Trending Markets: Lower smoothing values for faster reaction Perfect for traders who need sophisticated inter-market analysis tools beyond standard indicators. Whether you're analyzing gold vs dollar dynamics, sector rotation opportunities, or custom currency strength relationships, this indicator provides institutional-grade analysis capabilities with complete customization flexibility.
Pine Script® indicator
by d_day_80
TSD Quantum [Moeinudin Montazerfaraj] 🔸 "TSD" stands for **Trend 1-2-3 and Supply & Demand**, which is the foundation of the trading style this indicator is built upon. 🔹 TSD Quantum is a specialized indicator designed exclusively for day traders who trade EURUSD, XAUUSD (Gold), and DAX40 on the 1H, 15M, and 5M timeframes using a Supply & Demand-based strategy. This indicator is **not suitable for other symbols** and has been tailored specifically for these three assets to ensure high precision and effectiveness. --- ### 🔍 Key Features: ✅ **Trading Checklist Panel** A built-in checklist helps you track every rule in your trading plan. If even one condition is left unchecked, the system highlights it in red and marks the trade as "Not Allowed." This feature enhances trading discipline. ✅ **Spread & ATR Control Panel** Supports both auto-calculated and fixed values for spread and ATR. This is especially helpful when placing stop-losses quickly and accurately. ✅ **Inside & Outside Candle Detection** A dedicated panel highlights whether the last candle is inside or outside. Hovering your mouse over the chart elements automatically colorizes the candles: 🔵 Blue = Outside candle 🔴 Red = Inside candle Also displays the high/low of the latest outside bar. ✅ **Weekly Trade Stats Panel** Custom-built for the mentioned three assets. You can enter your trades using either fixed risk or floating risk models. ✅ **Performance Metrics** Helps you build and adjust a floating risk model—so you don’t have to enter every trade with the same lot size. Improves risk management across multiple trades. ✅ **Base Candles Display** Grey and white base candles are marked based on supply and demand zones. ✅ **EOT Candles** Candles with a green dot underneath indicate valid EOT opportunities for potential move-outs. ✅ **RC (Rejection Candle) Detection** RC candles are automatically detected to alert you of potential traps or weaknesses during Supply/Demand formations. --- ### ⚠️ Disclaimer This indicator does **not** issue buy/sell signals and **cannot guarantee profit or prevent loss**. It is a **tool for discretionary trading**, not an automated expert advisor. All decisions must be made by the trader based on their own strategy and risk tolerance. This is the **latest tested version** of TSD Quantum. All features have been validated and function as intended. Future updates will be provided if needed. --- 🙏 Thank you for reviewing this script. We hope it becomes a valuable addition to your day trading toolkit!
Pine Script® indicator
by mrmoeinudinQuantum
1
SPX Levels Adjusted to Active TickerThis indicator allows you to plot custom SPX levels directly on the ES1! (E-mini S&P 500 Futures) chart, automatically adjusting for the spread between SPX and ES1!. This is particularly useful for traders who perform technical analysis on SPX but execute trades on ES1!. Features: Input up to three SPX key levels to track (e.g., 5000, 4950, 4900) The script adjusts these levels in real-time based on the current spread between SPX and ES1! Displays the spread in the chart header for quick reference Plots updated horizontal lines that move with the spread Includes optional labels showing the spread periodically to reduce clutter Supports Multiple Tickers, ES1!, SPY and SPX500USD. Ideal for futures traders who want SPX context while trading ES1!.
Pine Script® indicator
by alejandroveronn
SPX Levels Adjusted to ES1!This indicator allows you to plot custom SPX levels directly on the ES1! (E-mini S&P 500 Futures) chart, automatically adjusting for the spread between SPX and ES1!. This is particularly useful for traders who perform technical analysis on SPX but execute trades on ES1!. Features: Input up to three SPX key levels to track (e.g., 5000, 4950, 4900) The script adjusts these levels in real-time based on the current spread between SPX and ES1! Displays the spread in the chart header for quick reference Plots updated horizontal lines that move with the spread Includes optional labels showing the spread periodically to reduce clutter Ideal for futures traders who want SPX context while trading ES1!. Make sure to apply this indicator on the ES1! chart, not SPX.
Pine Script® indicator
by alejandroveronn
1
4 diffs (CB & IBIT Premium)📊 Script Name: 4 diffs (CB & IBIT Premium) Version: Pine Script® v6 Overlay: Yes (table displayed on chart) 🧠 What it Does: This script tracks four important Bitcoin price differentials to monitor spot/perpetual/futures price inefficiencies and ETF premium/discounts, and displays them in a live table on the chart. It helps traders identify arbitrage opportunities or institutional pricing signals. 📈 Displayed Metrics: Coinbase Premium → Difference between Coinbase spot and Binance spot prices. → Use case: US vs. offshore spot market divergence. Coinbase Spot vs Binance Perpetual → Difference between Coinbase spot and Binance perpetual price. → Use case: Spot-perp basis, often used for funding rate insights or market stress. Bybit vs Binance Perpetual → Difference between Bybit perp and Binance perp price. → Use case: Compare derivative pricing across major offshore exchanges. IBIT Premium (CME vs ETF-implied) → Compares CME futures price vs. IBIT’s implied spot BTC value → IBIT implied BTC = IBIT ETF price ÷ (BTC held / shares outstanding) → Use case: Gauge institutional premium/discount and ETF arbitrage clues. 🛠️ Customization: Text color of the table is adjustable via the input setting. 📌 Visual Output: A fixed 2×4 table appears in the top-right corner of the chart. Each row shows a label and the live price difference in USD.
Pine Script® indicator
by LLVVB