Get started

Alertsignals

MTF RSI Confluence (3 TFs) + Table + AlertsThis indicator displays RSI confluence across three user-selectable timeframes in a single oscillator pane. It's designed to help you quickly confirm whether momentum conditions (overbought/oversold/neutral) align across multiple time horizons before acting. What it does - Plots three RSI lines at once, each sourced from a different timeframe (defaults: 5m / 15m / 1H ). - Applies independent overbought/oversold thresholds per timeframe , so each RSI can be evaluated with its own rules. - Shows a color-coded table summarizing: - timeframe - RSI value - status (OVERBOUGHT / NEUTRAL / OVERSOLD) - that timeframe's OB/OS levels - Highlights the pane background when there is full confluence: - All 3 overbought (red tint) - All 3 oversold (green tint) - Provides alert conditions when all three timeframes agree on overbought or oversold. How it works (key logic) - RSI is calculated per timeframe using request.security() with lookahead=barmerge.lookahead_off to avoid forward-looking values. - Each timeframe's RSI is classified: - RSI >= Overbought → Overbought - RSI <= Oversold → Oversold - otherwise → Neutral - Confluence triggers when all three statuses match (all overbought or all oversold). - Signals/alerts are gated by barstate.isconfirmed so the confluence events only trigger on confirmed bars (reduces repaint-like behavior on the current forming bar). How to use it 1. Add to chart (works on any symbol: crypto, forex, indices, stocks). 2. Configure: - RSI Length (1–200) - TF1 / TF2 / TF3 (any TradingView timeframe string) - OB/OS per timeframe with input constraints: - Overbought: 50–100 - Oversold: 0–50 - Optional: enable/disable the table and choose its position. 3. Interpret output: - RSI line colors reflect status (red = overbought, green = oversold, gray = neutral). - Table provides an at-a-glance confluence dashboard. - Use alerts for "all oversold" or "all overbought" as a filter for entries/exits or as a regime warning. Recommended usage - Works well on lower chart timeframes (1m–15m) to confirm setups with a higher timeframe (e.g., 1H / 4H). - Typical approach: - Look for all-oversold confluence during uptrends (potential pullback exhaustion). - Look for all-overbought confluence during downtrends (potential bounce exhaustion). - Consider pairing with trend context (moving averages, market structure) to avoid counter-trend signals. What makes it useful/original - Combines three MTF RSI readings + independent thresholds into one pane and a compact table, reducing chart clutter. - Uses non-forward-looking MTF data (lookahead_off) and confirmed-bar gating for more reliable confluence alerts. - Clear "traffic light" style status labeling to support fast discretionary decisions and alert-driven workflows. Disclaimer This script is for educational and informational purposes only and does not constitute financial advice. Alerts and signals are based on historical/hypothetical calculations and do not guarantee future results. Always manage risk and validate signals within your own trading plan.
Pine Script® indicator
by bouch
EDUVEST QQE Grade System - S/A/B/C Signal ClassificationEDUVEST QQE Grade System - S/A/B/C Signal Classification ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ █ ORIGINALITY This indicator introduces a unique grading system (S/A/B/C) for QQE signals, combining traditional QQE analysis with SMC (Smart Money Concepts) price zones and trading session filters. Unlike standard QQE indicators that show all signals equally, this version classifies signals by quality to help traders focus on the highest probability setups. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ █ WHAT IT DOES - Generates BUY/SELL signals with S/A/B/C grade classification - Automatically detects asset type and applies optimized QQE factors - Integrates SMC price zones (support/resistance) for grade enhancement - Filters signals by trading session time - Displays real-time session and market status Grade Hierarchy: - S (Gold/Orange): Signal near SMC zone + active trading hours - Highest quality - A (Green/Red): Score 70+ during trading hours - High quality - B (Darker): Score 50-69 during trading hours - Medium quality - C (Gray, small): Outside trading hours or weak signal - Low quality ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ █ HOW IT WORKS 【QQE Core Calculation】 The QQE (Quantitative Qualitative Estimation) is calculated as: 1. RSI with configurable period (default: 14) 2. EMA smoothing of RSI (Smoothing Factor: 5) 3. Dynamic bands using Wilder's smoothing: RSI ± (ATR of RSI × QQE Factor) QQE Factor is auto-adjusted per asset: - USD/JPY: 4.238 - EUR/USD: 3.8 - Gold (XAU/USD): 8.0 - NASDAQ/US100: 9.0 【Signal Generation】 - BUY: QQE line crosses above its trailing stop (QQExlong == 1) - SELL: QQE line crosses below its trailing stop (QQExshort == 1) 【Internal Scoring System】 Score components (0-100): - Signal Base: +25 points when signal occurs - QQE Strength: +10 to +20 based on RSI distance from 50 - Volatility: +15 (optimal ATR ratio 1.1-2.0), -10 (low volatility) - Volume Confirmation: +10 (high volume), -5 (low volume) - Session Bonus: +5 during London/NY sessions - Base: +20 points 【Grade Assignment】 - Grade S: Signal near user-defined SMC price zone (within tolerance %) AND during trading hours - Grade A: Internal score >= 70 AND during trading hours - Grade B: Internal score >= 50 AND during trading hours - Grade C: Outside trading hours OR score < 50 【SMC Price Zone Integration】 Users can set support/resistance levels for each asset. When price is within the tolerance percentage of these levels, signals are upgraded to S-grade, indicating confluence with institutional price levels. 【Trading Session Filter】 Configurable active trading hours (JST timezone): - Default: 15:00 - 01:00 JST (London + NY overlap) - Signals outside this window receive C-grade ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ █ HOW TO USE 【Recommended Settings】 - Timeframe: 15M, 1H, 4H - Best on: USD/JPY, EUR/USD, Gold, NASDAQ - Focus on: S and A grade signals 【Trading Strategy】 - S-Grade (Gold/Orange): Highest conviction - consider larger position - A-Grade (Green/Red): Strong signal - standard position - B-Grade: Valid but use additional confirmation - C-Grade: Avoid or use minimal size 【Setting Up SMC Zones】 1. Identify key support/resistance on higher timeframe 2. Input prices in SMC Price Settings 3. Adjust tolerance % (default: 0.15%) 4. S-grade appears when signal occurs near these levels 【Info Panel】 Top-right panel shows: - Asset name and detection mode (Auto/Manual) - Current session (Tokyo/London/NY) - Trading hours status - SMC zone proximity 【Alert Setup】 1. Enable alerts in settings 2. Create alert with "Any alert() function call" 3. Alerts include grade, price, and session info ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ █ SETTINGS Basic Settings: - Enable Alerts: Turn on/off notifications - Time Filter: Activate trading hour filter - Start/End Hour: Define active trading window (JST) QQE Settings: - RSI Period: RSI calculation period - RSI Smoothing: EMA smoothing factor - Auto QQE Factor: Auto-detect optimal factor per asset - Manual QQE Factor: Override when auto is disabled SMC Price Settings: - Support/Resistance levels for each asset - Tolerance %: How close to SMC line for S-grade Display Settings: - Grade Only: Hide QQE lines, show only signals - Show SMC Lines: Display support/resistance on chart - Show Debug: Display asset detection info ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ █ CREDITS QQE concept originally developed by John Ehlers. SMC (Smart Money Concepts) integration and grading system by EduVest. License: Mozilla Public License 2.0
Pine Script® indicator
by EduVest_doro
EDUVEST QQE Signal v3.0 - Multi-Timeframe Scoring SystemEDUVEST QQE Signal v3.0 - Multi-Timeframe Scoring System ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ █ ORIGINALITY This indicator combines QQE (Quantitative Qualitative Estimation) with HMA (Hull Moving Average) and introduces a unique AI-based scoring system that rates signal quality from 0-100. Unlike traditional QQE indicators that show simple buy/sell signals, this version categorizes signals into four strength levels: BIG CHANCE, SUPER, POWER, and STRONG. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ █ WHAT IT DOES - Generates scored BUY/SELL signals with quality ratings (60-100 points) - Categorizes signals into 4 strength levels for easy decision making - Supports Multi-Timeframe (MTF) analysis - Auto-detects asset type and applies optimized QQE factors - Provides customizable alerts based on score thresholds Signal Hierarchy: - 💰 BIG CHANCE (90-100): Highest probability setups - ⚡ SUPER (80-89): Very strong signals - 🚀 POWER (70-79): Strong signals with HMA confluence - 💪 STRONG (60-69): Standard quality signals ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ █ HOW IT WORKS 【QQE Calculation】 QQE is based on a smoothed RSI with dynamic bands: 1. Calculate RSI with specified period (default: 14) 2. Apply EMA smoothing to RSI (Smoothing Factor, default: 5) 3. Calculate ATR of the smoothed RSI 4. Create dynamic bands: RSI ± (ATR × QQE Factor) The QQE Factor is automatically adjusted per asset: - Forex (USDJPY, EURUSD): 3.8 - 4.238 - Gold (XAUUSD): 8.0 - Crypto (BTC): 12.0, (ETH): 10.0 - Indices (NASDAQ): 4.238 【HMA Calculation】 Hull Moving Average for trend confirmation: HMA = WMA(2 × WMA(price, n/2) - WMA(price, n), √n) 【Signal Generation】 - BUY: QQE crosses above its band (QQExlong == 1) - SELL: QQE crosses below its band (QQExshort == 1) 【AI Scoring System】 The score is calculated from multiple factors: Signal Base (0-35 points): - QQE + HMA confluence: +35 - QQE or HMA alone: +25 QQE Strength (10-25 points): - RSI distance from 50 (momentum strength) - >30 distance: +25, >20: +20, >10: +15, else: +10 Volatility Score (-10 to +15 points): - ATR ratio 1.1-2.0: +15 (optimal volatility) - ATR ratio <0.8: -10 (low volatility warning) Volume Confirmation (-5 to +15 points): - Volume > 120% of average: +15 - Volume < 80% of average: -5 Base Points: +15 Final Score = Clamped(0, 100, sum of all factors) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ █ HOW TO USE 【Recommended Settings】 - Timeframe: 5M, 15M, 1H, 4H - Best on: Forex, Gold, NASDAQ, BTC/ETH - Minimum Score: 60 (adjustable) 【Reading Signals】 - BIG CHANCE (Gold label, 90+): Highest conviction - consider larger position - SUPER (Yellow label, 80-89): Very strong - standard position - POWER (Cyan/Magenta label, 70-79): Strong with trend confirmation - STRONG (Green/Red label, 60-69): Valid but use additional confirmation 【MTF Feature】 Enable MTF to analyze signals from a higher timeframe while viewing lower timeframe charts. The indicator auto-selects 5-minute as the analysis timeframe, or you can set it manually. 【Alert Setup】 1. Enable alerts in settings 2. Set minimum score threshold (default: 60) 3. Create alert with "Any alert() function call" 【Important Notes】 - Signals are confirmed at bar close (no repainting) - Higher scores = higher probability, not guaranteed profits - Always use proper risk management - Consider market context and support/resistance levels ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ █ SETTINGS ⏱️ MTF Settings - MTF Use: Enable multi-timeframe analysis - Manual Timeframe: Override auto-detection - Show Panel: Display info panel (default: OFF) 🎨 Design - Neon Colors: Vibrant color scheme - Show HMA Line: Display HMA on chart - Minimum Score: Filter weak signals - Label Transparency: Adjust label opacity - Large Labels: Mobile-friendly sizing 🔧 QQE Settings - RSI Period: RSI calculation period - Smoothing: EMA smoothing factor - AI Score: Enable scoring system 🔔 Alerts - Enable Alerts: Turn on/off notifications - Minimum Score: Alert threshold ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ █ CREDITS QQE concept originally developed by John Ehlers. HMA (Hull Moving Average) by Alan Hull. Enhanced with scoring system and MTF support by EduVest. License: Mozilla Public License 2.0
Pine Script® indicator
by EduVest_doro
EDUVEST UTBOT ADJ - Adaptive ATR Trailing StopEDUVEST UTBOT ADJ - Adaptive ATR Trailing Stop with Session-Based Sensitivity ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ █ ORIGINALITY This indicator is an enhanced version of the classic UT Bot concept, featuring automatic session-based ATR sensitivity adjustment. Unlike the original UT Bot which uses a fixed sensitivity value, this version dynamically adapts to different trading sessions (Tokyo, London, New York) and automatically detects asset characteristics to optimize signal generation. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ █ WHAT IT DOES - Generates BUY and SELL signals based on ATR trailing stop crossovers with a moving average - Automatically adjusts sensitivity based on current trading session (Tokyo/London/NY) - Auto-detects asset type and applies optimized parameters for each instrument - Displays real-time session information and volatility status - Provides alert functionality with customizable cooldown periods ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ █ HOW IT WORKS 【Core Logic: ATR Trailing Stop】 The indicator calculates an ATR-based trailing stop using the formula: Trailing Stop = Price ± (Sensitivity × ATR) When price is above the trailing stop and rising, the stop trails below price. When price is below the trailing stop and falling, the stop trails above price. 【Signal Generation】 - BUY Signal: Price crosses above the trailing stop AND Moving Average crosses above the trailing stop - SELL Signal: Price crosses below the trailing stop AND Moving Average crosses below the trailing stop 【Session-Based Sensitivity Adjustment】 The indicator adjusts ATR sensitivity based on trading session (JST timezone): - Tokyo (08:00-15:00): Lower sensitivity (reduced by adjustment value) - typically quieter markets - London (15:00-23:00): Base sensitivity - moderate volatility - New York (23:00-08:00): Higher sensitivity (increased by adjustment value) - higher volatility 【Dynamic ATR Adjustment】 When enabled, the indicator compares current ATR to its smoothed average: - ATR Ratio = Current ATR / SMA(ATR, smoothing period) - Volatility Multiplier = 1.0 + (Sensitivity × (2.0 - ATR Ratio)) This reduces sensitivity during high volatility (fewer false signals) and increases sensitivity during low volatility (faster response). 【Auto Asset Detection】 The indicator automatically detects the traded instrument and applies optimized parameters: - Stable pairs (USDJPY, EURUSD, USDCHF): Base sensitivity 1.5-1.8 - Moderate pairs (AUDUSD, USDCAD, EURJPY): Base sensitivity 2.0-2.3 - Volatile pairs (GBPUSD): Base sensitivity 2.8 - Commodities (GOLD/XAUUSD): Base sensitivity 3.5 - Indices (NASDAQ/NAS100): Base sensitivity 4.0 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ █ HOW TO USE 【Recommended Settings】 - Timeframe: 15 minutes or higher (15M, 1H, 4H recommended) - Best performance on: Forex majors, Gold, NASDAQ - Enable "Auto Asset Detection" for optimized parameters 【Entry Rules】 - BUY: Enter long when green BUY label appears - SELL: Enter short when pink SELL label appears 【Session Panel】 The top-right panel displays: - Current trading session (Tokyo/London/NY) - Volatility status (High Chance/Medium Chance/Caution) - Mode (AUTO/MANUAL) 【Alert Setup】 1. Enable "Viewer Alert Display" in settings 2. Set cooldown period (default: 15 minutes) to avoid signal spam 3. Create alert with "Any alert() function call" condition 【Important Notes】 - This indicator does not repaint - signals are confirmed at bar close - Lower timeframes (1M, 5M) may generate excessive signals - Always use proper risk management and confirm with other analysis ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ █ SETTINGS OVERVIEW 🎯 Alert Settings - Viewer Alert Display: Enable/disable alert labels - Cooldown Function: Prevent rapid consecutive signals - Cooldown Time: Minutes between alerts (5-60) 🔧 Dynamic ATR Settings - Enable Dynamic ATR: Auto-adjust based on volatility - ATR Period: Calculation period (default: 14) - ATR Smoothing: Smoothing period for ratio calculation - Volatility Sensitivity: How much to adjust (0.1-1.0) 🕐 Session ATR Adjustment - Enable Time Adjustment: Session-based sensitivity - Show Session Info: Display session panel 📊 Asset Settings - Auto Asset Detection: Automatically optimize for instrument - Manual settings available when auto-detection is disabled ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ █ CREDITS Based on the original UT Bot concept by QuantNomad. Enhanced with session-based adaptation and auto-asset detection by EduVest. License: Mozilla Public License 2.0
Pine Script® indicator
by EduVest_doro
ATR Volatility AlertsOverview: This is a dynamic alert tool based on the Average True Range (ATR), designed to help traders detect sudden price movements that exceed normal volatility levels. Whether you are trading breakouts or monitoring for abnormal spikes, this indicator visualizes these events on the chart and triggers system alerts when the price move exceeds your specified ATR multiplier. Key Features: Fully Customizable ATR Range: You can adjust the ATR Length (Default: 14) and the Multiplier (Default: 1.5x). Tip: Increase the multiplier (e.g., to 2.0 or 3.0) to catch only extreme volatility, or lower it for scalping smaller moves. Visual Chart Signals: Visual markers appear instantly when a bar's movement exceeds the ATR threshold. Green Triangle: Indicates an Upward Spike. Red Triangle: Indicates a Downward Spike. Flexible System Alerts: Designed to integrate seamlessly with TradingView's alert system. You can choose from three specific alert directions based on your strategy: 1.Price Spike Up: Triggers only on sharp upward moves. 2.Price Spike Down: Triggers only on sharp downward moves. 3.Bidirectional Volatility Alert: Triggers on BOTH huge pumps and dumps. How to Set Alerts: Click the "Create Alert" button in TradingView. Select ATR Volatility Alerts in the "Condition" dropdown. Choose the specific logic you need: · Select Price Spike Up for bullish monitoring. · Select Price Spike Down for bearish monitoring. · Select Bidirectional Volatility Alert to watch for any volatility expansion.
Pine Script® indicator
by Sewell_
BUY/SELL/R/BBuy/Sell/R/B by SeanKidd Purpose: A clean, anchored signal system combining StochRSI crossovers, CVI top/bottom detection, and a MACD direction line that moves with price. ⚙️ How It Works BUY / SELL – Generated from a higher-timeframe StochRSI crossover. BUY (Green) → %K crosses above %D SELL (Red) → %K crosses below %D R (Reverse) – Yellow “R” appears above the candle when the CVI model detects a local top or exhaustion point. B (Bottom) – Blue “B” appears below the candle when CVI detects a local bottom. MACD Direction Line – Green = MACD above Signal → bullish momentum Red = MACD below Signal → bearish momentum The line rides just above the candles, offset by ATR so it always tracks price. 🧭 How to Use It Add the indicator: Search for Buy/Sell/R/B by SeanKidd under Community Scripts. Click ★ to favorite it. Apply it to your chart. Open ⚙️ Settings → Inputs Calculation Timeframe (StochRSI) → pick how fast or slow you want signals (default Weekly). MACD Line Offset (ATR ×) → raise or lower the MACD line if it overlaps candles. Adjust Top/Bottom thresholds to control how often R/B appear. Toggle Highlight bars or Color candles for visual clarity. Go to Settings → Scales and ensure it’s set to ✅ “Scale with Price Chart” or ✅ same scale side as the candles. This keeps everything perfectly attached to the chart. Optional: Add alerts Create → Alert → Condition → Buy/Sell/R/B by SeanKidd Choose: SRSI BUY, SRSI SELL, Top (R), or Bottom (B). 📈 Reading the Chart Marker Meaning Color Position BUY StochRSI %K cross above %D Lime Below bar SELL StochRSI %K cross below %D Red Above bar R CVI-detected top / reversal Yellow Above bar B CVI-detected bottom Blue Below bar Line MACD momentum direction Green/Red Above highs 💡 Tips Works on any symbol or timeframe. Slower charts (Daily–Weekly) give cleaner swing signals. Faster charts (15m–1h) show short-term reversals. Combine the MACD line direction with BUY/SELL for stronger confirmation.
Pine Script® indicator
by Seankidd
1
True Strength Index with Crossovers Alerts🚀 True Strength Index (TSI) with Visual Crossover Alerts Hey everyone! I’m sharing my customized True Strength Index (TSI) indicator, which I've boosted with clear visual signals and alert conditions based on my personal, high-probability trading strategy. The True Strength Index is a powerful, oscillation-based momentum indicator that smooths price movements twice using Exponential Moving Averages (EMAs). This double-smoothing process helps to filter out market noise, giving you a much clearer view of momentum changes than basic indicators. 🛠️ How This Script Works This script focuses on the crucial interaction between the TSI line and its Signal Line: TSI Line (Blue): Tracks momentum direction and strength. Signal Line (Red): A simple EMA of the TSI line, used to determine short-term trend shifts. Visual Buy/Sell Signals: To make signals impossible to miss, I've added distinct visual markers: 🟢 Green Dot: A "Buy Signal" is plotted at the bottom of the indicator pane when the TSI crosses above the Signal Line (bullish crossover). 🔴 Red Dot: A "Sell Signal" is plotted at the bottom when the TSI crosses below the Signal Line (bearish crossover). Additionally, I've included named alertconditions so you can set up real-time notifications for these exact crossovers in the TradingView Alert system. 🧠 My Trading Logic: Combining TSI with RSI I don't use the TSI in isolation. My favorite approach is to use this TSI indicator as a timing tool, but only when it aligns with the overall momentum context defined by the Relative Strength Index (RSI). This is the key to my strategy: Bullish Trade Filter: I only take a BUY signal (Green Dot) when my RSI indicator is already in a bullish territory (above 50). Bearish Trade Filter: I only take a SELL signal (Red Dot) when my RSI indicator is already in a bearish territory (below 50). This combination ensures you are trading with the underlying momentum trend, improving the probability of success. ⚙️ My Recommended Custom Settings For the best results with this strategy, I recommend using the following custom settings. You can enter these values in the "Inputs" tab when adding the indicator to your chart. 1. TSI (Alerts) Settings Long Length - 60 Higher value for smoother price change data. Short Length -30 Medium-term smoothing for clearer momentum shifts. Signal Length - 9 Short length for a responsive signal line. 2. Companion RSI Settings (RSI+) RSI Length - 150 A long look-back period for highly accurate trend filtering. MA1 Length - 60 Used for additional smoothing. MA2 Length - 150 Used for powerful trend confluence.
Pine Script® indicator
by Charted_Trades
Fixed High Timeframe Moving AveragesFixed High Timeframe Moving Averages (W/D/4H) Summary This indicator plots essential, high-timeframe (HTF) Moving Averages onto your chart, **no matter which timeframe you are currently viewing**. It is designed for traders who need multi-timeframe context at a glance. Stop switching charts to see where the 200-Week or 50-Day MA is—now you can see all critical HTF levels directly on your 5-minute (or any other) chart. --- Who it’s for Traders who rely on moving averages but like to work on lower chart timeframes while keeping higher timeframe context in sight. If you scalp on 1–15m yet want Weekly/Daily/4H MAs always visible, this is for you. --- What it shows Pinned (“fixed”) moving averages from higher timeframes—Weekly (20/100/200) , Daily (50/100/200/365) and 4H (200) —rendered on any chart timeframe. Your favorite HTF MAs stay on screen no matter what TF you’re currently analyzing. --- Features * **MA types:** SMA, EMA, VWMA, Hull. * **Fully configurable:** toggle each line, set periods, colors, and thickness. * **Two alert modes (see below):** intrabar vs confirmed HTF close. * **Works on any symbol & chart TF** using `request.security` to fetch HTF data. --- Alerts & Modes This indicator solves the biggest problem with MTF alerts: false signals. You can choose one of two modes: 1. **Intrabar mode** — compares current chart price to the HTF MA. Triggers as soon as price crosses the HTF line; great for early signals but may update until the HTF bar closes. 2. **Confirmed mode** — checks HTF close vs HTF MA. Signals only on the higher-TF bar close; fewer false starts, no intrabar repainting on that TF. Per-line *Cross Above / Cross Below* conditions are provided for all enabled MAs (e.g., “20W — Cross Above”, “365D — Cross Below”, etc.). **How to use alerts:** add the script → “Create Alert” → pick any condition from the script’s list. --- Why this helps * Keeps Weekly/Daily structure visible while you execute on LTF. * Classic anchors (e.g., 200D, 20W/100W/200W) are popular for trend bias, dynamic support/resistance, and pullback context. * Lets you standardize MA references across all your lower-TF playbooks. --- Notes on confirmation & repainting * Intrabar signals can change until the higher-TF bar closes (that’s expected with multi-TF data). * Confirmed mode waits for the HTF close—cleaner, but later. Choose what fits your workflow. --- Quick setup 1. Pick `MA Type` (SMA/EMA/VWMA/Hull). 2. Enable the HTF lines you want (Weekly 20/100/200; Daily 50/100/200/365; 4H 200). 3. Choose `Alert Mode` (Intrabar vs Confirmed). 4. Style colors/widths to taste and set alerts on the lines you care about. --- Good practice * Combine HTF MAs with price action (swings, structure, liquidity grabs) rather than using them in isolation. * Always validate signals in your execution TF and use a risk plan tailored to volatility. * Protect your capital: position sizing, stops, and disciplined risk management matter more than any single line on the chart. --- Disclaimer For educational/informational purposes only; not financial advice. Trading involves risk—manage it responsibly.
Pine Script® indicator
by MAXmks
Outside the Bollinger Bands Alerting Indicator Overview The Outside the Bollinger Bands Alerting Indicator is a comprehensive technical analysis tool that combines multiple proven indicators into a single, powerful system designed to identify high-probability reversal patterns at Bollinger Band extremes. This indicator goes beyond simple band touches to detect sophisticated pattern formations that often signal strong directional moves. Key Features & Capabilities 🎯 Advanced Pattern Recognition Bollinger Band Breakout Patterns - Detects "pierce-and-reject" formations where price breaks through a Bollinger Band but immediately reverses back inside - Identifies failed breakouts that often lead to strong moves in the opposite direction - Combines multiple confirmation signals: engulfing candle patterns, MACD momentum, and ATR volatility filters - Visual alerts with symbols positioned below (bullish) or above (bearish) candles Tweezer Top & Bottom Patterns - Identifies consecutive candles with nearly identical highs (tweezer tops) or lows (tweezer bottoms) - Requires at least one candle to breach the respective Bollinger Band - Confirms reversal with directional close requirements - Customizable tolerance settings for pattern sensitivity - Visual alerts with ❙❙ symbols for easy identification 📊 Multi-Indicator Integration Bollinger Bands Indicator - Dual-band configuration with outer (2.0 std dev) and inner (1.5 std dev) bands that can be adjusted to suit your own parameters - Configurable MA types: SMA, EMA, SMMA (RMA), WMA, VWMA - Customizable length, source, and offset parameters - Color-coded band fills for visual clarity Moving Average Suite - EMA 9, 21, 50, and 200 (individually toggleable) - Special "SMA 3 High" for help visualizing and detecting Bollinger Band break-outs - Dynamic color coding based on price relationship Optional Ichimoku Cloud overlay - Complete Ichimoku implementation with customizable periods - Dynamic cloud coloring based on trend direction - Toggleable overlay that doesn't interfere with other indicators 🚨 Comprehensive Alert System Real-Time JSON Alerts - Sends structured data on every confirmed bar close - Includes all indicator values: BB levels, EMAs, MACD, RSI - Contains signal states and crossover conditions - Perfect for automated trading systems and webhooks {"timestamp":1753118700000,"symbol":"ETHUSD","timeframe":"5","price":3773.3,"bollinger_bands":{"upper":3826.95,"basis":3788.32,"lower":3749.68},"emas":{"ema_9":3780.45,"ema_21":3788.92,"ema_50":3800.79,"ema_200":3787.74,"sma_3_high":3789.45},"macd":{"macd":-10.1932,"signal":-11.3266,"histogram":1.1334},"rsi":{"rsi":40.5,"rsi_ma":39.32,"level":"neutral"}} Specific Alert Conditions - MACD histogram state changes (rising to falling, falling to rising) - RSI overbought/oversold crossovers - All pattern detections (BB Bounce, Tweezer patterns) - Bollinger Band breakout alerts 🎨 Visual Elements Pattern Identification - ♻ symbols for Bollinger Band breakout patterns (green for bullish, red for bearish) - ❙❙ symbols for tweezer patterns (green below for bottoms, red above for tops) - Color-coded band fills for trend visualization Chart Overlay Options - All moving averages with distinct colors - Bollinger Bands with inner and outer boundaries - Optional Ichimoku cloud with trend-based coloring Trading Applications Reversal Trading - Identify high-probability reversal points at extreme price levels - Use failed breakout patterns for entry signals - Combine multiple timeframes for enhanced accuracy Trend Analysis - Monitor moving average relationships for trend direction - Use Ichimoku cloud for trend strength assessment - Track momentum with MACD and RSI integration Risk Management - ATR-based volatility filtering reduces false signals - Multiple confirmation requirements improve signal quality - Real-time alerts enable prompt decision making Suggested Use - Use on multiple timeframes for confluence - Combine with support/resistance levels for enhanced accuracy - Set up alerts for hands-free monitoring - Customize settings based on market volatility and trading style - Consider volume confirmation for stronger signals
Pine Script® indicator
by Chart0bserver
KAMA Trend Flip - SightLing LabsBuckle up, traders—this open-source KAMA Trend Flip indicator is your ticket to sniping trend reversals with a Kaufman Adaptive Moving Average (KAMA) that’s sharper than a Wall Street shark’s tooth. No voodoo, no fluff—just raw, volatility-adaptive math that dances with the market’s rhythm. It zips through trending rockets and chills in choppy waters, slashing false signals like a samurai. Not laggy like the others - this thing is the real deal! Core Mechanics: • Efficiency Ratio (ER): Reads the market’s pulse (0-1). High ER = turbo-charged MA, low ER = smooth operator. • Adaptive Smoothing: Mixes fast (default power 2) and slow (default 30) constants to match market mood swings. • Trend Signals: KAMA climbs = blue uptrend (bulls run wild). KAMA dips = yellow downtrend (bears take over). Flat = gray snooze-fest. • Alerts: Instant pings on flips—“Trend Flip Up” for long plays, “Down” for shorts. Plug into bots for set-and-forget domination. Why It Crushes: • Smokes static MAs in volatile arenas (crypto, stocks, you name it). Backtests show 20-30% fewer fakeouts than SMA50. • Visual Pop: Overlays price with bold blue/yellow signals. Slap it on BTC 1D to see trends light up like Times Square. • Tweakable: Dial ER length (default 50) to your timeframe. Short for scalps, long for swing trades. Example Settings in Action: • 10s Chart (Hyper-Scalping): Set Source: Close, ER Length: 100, Fast Power: 1, Slow Power: 6. Catches micro-trends in crypto like a heat-seeking missile. Blue/yellow flips scream entry/exit on fast moves. • 2m Chart (Quick Trades): Set Source: Close, ER Length: 14, Fast Power: 1, Slow Power: 6. Perfect for rapid trend shifts in stocks or forex. Signals align with momentum bursts—check historical flips for proof. Deployment: • Drop it on any chart. Backtest settings to match your asset’s volatility—tweak until it sings. • Pair with RSI or volume spikes for killer confirmation. Pro move: Enter on flip + volume pop, exit on reverse. • Strategy-Ready: Slap long/short logic on alerts to build a lean, mean trading machine. Open source from SightLing Labs—grab it, hack it, profit from it. Share your tweaks in the comments and let’s outsmart the market together. Trade hard, win big!
Pine Script® indicator
by SightLineLabs
Triple EMA with Alert | 21, 50, 200 EMA Strategy + Crossover🚀 Boost your trading edge with the Triple EMA with Alert — a professional-grade indicator designed for traders who want precise, real-time trend confirmation across short, medium, and long-term market movements. 🔹 What Makes This Indicator Powerful? Three Adjustable EMAs — Default: 21, 50, 200 periods (fully customizable 1–200). Toggle Visibility — Show only the EMAs you need for your strategy. Real-Time Alerts — Get notified instantly when: EMA 1 crosses EMA 2 → short-term trend change. EMA 2 crosses EMA 3 → medium-term trend alignment. Works on All Markets & Timeframes — Forex, crypto, stocks, indices, and commodities. 🔹 Why Traders Love It 📊 Multi-Timeframe Trend Confirmation — Filter out noise and trade with market momentum. 🎯 Accurate Crossover Signals — Identify bullish and bearish momentum shifts. 🔔 Hands-Free Monitoring — Alerts keep you informed even when you’re away from the chart. 💡 Versatile for Any Strategy — Perfect for scalping, swing trading, or long-term investing. 🔹 How to Use It Bullish Signal — EMA 1 crossing above EMA 2 or EMA 2 crossing above EMA 3. Bearish Signal — EMA 1 crossing below EMA 2 or EMA 2 crossing below EMA 3. Combine with support/resistance zones, RSI, or volume for higher probability trades. 📌 Pro Tip: Use EMA 21 & EMA 50 for momentum confirmation. Use EMA 200 to spot the overall market direction. If you’re serious about trend trading with precision, the Triple EMA with Alert will keep you one step ahead of market moves — no more missed entries or exits.
Pine Script® indicator
by noufalbinjalal
Expansion Triangle [TradingFinder] MegaPhone Broadening🔵 Introduction The Expanding Triangle, also known as the Broadening Formation, is one of the key technical analysis patterns that clearly reflects growing market volatility, increasing indecision among participants, and the potential for sharp price explosions. This pattern is typically defined by a sequence of higher highs and lower lows, forming within two diverging trendlines. Unlike traditional triangles that converge to a breakout point, the expanding triangle pattern becomes wider over time, leaving no precise apex for a breakout to occur. From a price action perspective, the pattern represents a prolonged tug-of-war between buyers and sellers, where neither side has taken control yet. Each aggressive swing opens the door to new opportunities whether it's a trend reversal, range trading, or a momentum breakout. This dual nature makes the pattern highly versatile across market conditions, from exhausted trend ends to volatile consolidation zones. The custom-built indicator for this pattern uses a combination of smart algorithms and detailed analysis of swing dynamics to automatically detect expanding triangles and highlight low-risk entry points. Traders can use this tool to capitalize on high-probability setups from shorting near the upper edge of the structure with confirmation, to trading bearish breakouts during trend continuations, or entering long positions near the lower boundary during bullish reversals. The chart examples included in this article demonstrate these three highly practical trading scenarios in live market conditions. A major advantage of this indicator lies in its structural filtering engine, which analyzes the behavior of each price leg in the triangle. With four adjustable filter levels from Very Aggressive, which highlights all potential patterns, to Very Defensive, which only triggers when price actually touches the triangle's trendlines the indicator ensures that only structurally sound and verified setups appear on the chart, reducing noise and false signals significantly. Long Setup : Short Setup : 🔵 How to Use The pattern typically forms in conditions of heightened uncertainty and volatility, where price swings generate a series of higher highs and lower lows. The expanding triangle consists of three key legs bounded by diverging trendlines. The indicator intelligently analyzes each leg's direction and angle to determine whether a valid pattern is forming. At the core of the indicator’s logic is its leg filtering system, which controls the quality of the pattern and filters out weak or noisy setups. Four structural filter modes are available to suit different trading styles and risk preferences. In Very Aggressive mode, filters are disabled, and the indicator detects any pattern purely based on the sequence of swing points. This mode is ideal for traders who want to see everything and apply their own discretion. In Aggressive mode, the indicator checks whether each new leg extends no more than twice the length of the previous one. If a leg overshoots excessively, the structure is invalidated. In Defensive mode, the filter enforces a minimum movement requirement each leg must move at least 2% of the previous one. This prevents the formation of shallow, weak patterns that visually resemble triangles but lack substance. The strictest setting, Very Defensive, combines all previous filters and additionally requires the price to physically touch the triangle’s trendlines before issuing a signal. This ensures that setups only appear when real market interaction with key structural levels has occurred, not based on assumptions or geometry alone. This mode is ideal for traders seeking maximum precision and minimal risk. 🟣 Bullish Setup A bullish setup within the Expanding Triangle pattern occurs when price revisits the lower support boundary after a series of broad swings typically near the third leg of the formation. This area often represents a shift in momentum, where sellers begin to lose strength and buyers prepare to take control. Ideally, the setup is accompanied by a bullish reversal candle (e.g. doji, pin bar, or engulfing) near the lower trendline. If the Very Defensive filter is active, the indicator will only issue a signal if price makes a confirmed touch on the trendline and reacts from that level. This significantly improves signal accuracy and filters out premature entries. After confirmation, traders may choose to enter a long position on the bullish candle or shortly afterward. A logical stop-loss is placed just below the recent swing low within the pattern. The target can be set at or near the upper trendline, or projected using the full height of the triangle added to the breakout point. On higher timeframes, this reversal often marks the beginning of a strong uptrend. 🟣 Bearish Setup A bearish setup forms when price climbs toward the upper resistance trendline, usually as the third leg completes. This is where buyers often begin to show exhaustion, and sellers step in with strength providing an ideal low-risk entry point for short positions. As with the bullish setup, if the Candle Confirmation filter is enabled, the indicator will only show a signal when a bearish reversal candle forms at the point of contact. If Defensive or Very Defensive filters are also active, the setup must meet strict criteria of proportionate leg movement and an actual trendline touch to qualify. Once confirmed, traders can enter on the reversal candle, placing a stop-loss slightly above the recent high. The target can be set at the lower trendline or calculated based on the triangle's full height, projected downward. This setup is particularly useful at the end of weak bullish trends or in volatile market tops. 🔵 Settings 🟣 Logic Settings Pivot Period : Defines how many bars are analyzed to identify swing highs and lows. Higher values detect larger, slower structures, while lower values respond to faster patterns. The default value of 13 offers a balanced sensitivity. Pattern Filter : Very Aggressive : Detects all patterns based on point sequence with no structural checks. Aggressive : Ensures each leg is no more than 2x the size of the previous one. Defensive : Requires each leg to be at least 2% the size of the previous leg. Very Defensive : The strictest level; only confirms patterns when price touches trendlines. Candle Confirmation : When enabled, the indicator requires a valid confirmation candle (doji, pin bar, engulfing) at the interaction point with the trendline before issuing a signal. This reduces false entries and improves entry precision. 🟣 Alert Settings Alert : Enables alerts for SSS. Message Frequency : Determines the frequency of alerts. Options include 'All' (every function call), 'Once Per Bar' (first call within the bar), and 'Once Per Bar Close' (final script execution of the real-time bar). Default is 'Once per Bar'. Show Alert Time by Time Zone : Configures the time zone for alert messages. Default is 'UTC'. 🔵 Conclusion The Expanding Triangle pattern, with its wide structure and volatility-driven nature, represents chaos but also opportunity. For traders who can read its behavior, it provides some of the most powerful setups for reversals, breakouts, and range-based trades. While the pattern may seem messy at first glance, it is built on clear logic and when properly detected, it offers high-probability opportunities. This indicator doesn’t just draw expanding triangles it intelligently evaluates their structural quality, validates price interaction through candle confirmation, and allows the trader to fine-tune the detection logic through adjustable filter levels. Whether you’re a reversal trader looking for a turning point, or a breakout trader hunting momentum, this tool adapts to your strategy. In volatile or uncertain markets, where fakeouts and sudden shifts are common, this indicator can become a cornerstone of your trading system helping you turn volatility into structured, high-quality opportunities.
Pine Script® indicator
by TFlab
2
IDKFAIDKFA - Advanced Order Blocks & Volume Profile with Market Structure Analysis Why IDKFA? Named after the legendary DOOM cheat code that gives players "all weapons and full ammo," IDKFA provides traders with a comprehensive arsenal of market analysis tools. Just as the cheat code arms players with everything needed for combat, this indicator equips traders with essential market structure tools: Order Blocks, Volume Profile, LVN/HVN areas, Fibonacci retracements, and intelligent buy/sell signals - all in one unified system. Core Features Order Blocks Detection Automatically identifies institutional order blocks using pivot high/low analysis Extends blocks dynamically until price interaction occurs Bullish blocks (demand zones) and bearish blocks (supply zones) Customizable opacity and extend functionality Advanced Volume Profile Real-time volume profile calculation for multiple session types Point of Control (POC), Value Area High (VAH), and Value Area Low (VAL) Mode 1: Side-by-side bull/bear volume display Mode 2: Overlapped volume display with percentage analysis Shows buying vs selling pressure at each price level LVN/HVN Area Detection Low Volume Nodes (LVN): Areas below VAL where price moves quickly High Volume Nodes (HVN): Areas above VAH with strong resistance NPOC (Naked Point of Control): Single print areas within Value Area Volume-based gradient coloring shows relative activity levels Smart Fibonacci Retracements Auto-detects trend direction for proper fibonacci orientation Dynamic color coding: Red levels in uptrends, Gold in downtrends Special 88.6% level turns lime green in downtrends Key levels: 23.6%, 38.2%, 50%, 61.8%, 65%, 78.6%, 88.6% Intelligent Signal System Works best on higher timeframes Identifies high-probability reversal setups at key levels Buy signals: Large bearish rejection followed by bullish reclaim Sell signals: Large bullish rejection followed by bearish breakdown Signals only trigger near significant support/resistance areas Signal Analysis & Usage Guidelines Buy Signal Mechanics The buy signal triggers when: Previous candle shows significant bearish movement (minimum ATR multiplier) Current candle reclaims a configurable percentage of the previous candle's range Price is near a key support level (order blocks, fibonacci, volume levels) Sell Signal Mechanics The sell signal triggers when: Previous candle shows significant bullish movement (minimum ATR multiplier) Current candle rejects below a configurable percentage of the previous candle's range Price is near a key resistance level (order blocks, fibonacci, volume levels) When to TAKE Signals High Probability Buy Signals: Signal appears AT or BELOW the VAL (Value Area Low) Signal occurs at bullish order block confluence Price is in LVN area below VAL (momentum acceleration zone) Signal aligns with fibonacci 61.8% or 78.6% support Multiple session POC levels provide support confluence Previous session's VAL acting as current support High Probability Sell Signals: Signal appears AT or ABOVE the VAH (Value Area High) Signal occurs at bearish order block confluence Price is in HVN area above VAH (heavy resistance zone) Signal aligns with fibonacci 61.8% or 78.6% resistance Multiple session POC levels provide resistance confluence Previous session's VAH acting as current resistance When to AVOID Signals Avoid Buy Signals When: Signal appears ABOVE the VAH (buying into resistance) Price is in HVN red zones (high volume resistance areas) No clear support structure below current price Volume profile shows heavy selling pressure (high bear percentages) Signal occurs during low-volume periods between major sessions Multiple bearish order blocks exist below current price Avoid Sell Signals When: Signal appears BELOW the VAL (selling into support) Price is in LVN green zones (momentum could continue) No clear resistance structure above current price Volume profile shows heavy buying pressure (high bull percentages) Signal occurs during Asian session ranges without clear direction Multiple bullish order blocks exist above current price Volume Profile Context for Signals Understanding Bull/Bear Percentages: 70%+ Bull dominance at a level = Strong support expected 70%+ Bear dominance at a level = Strong resistance expected 50/50 Split = Neutral zone, less predictable Use percentages to gauge conviction behind moves POC (Point of Control) Interactions: Signals above POC in uptrend = Higher probability Signals below POC in downtrend = Higher probability Signals against POC bias require extra confirmation POC often acts as magnetic level for price return Trading Strategies Strategy 1: VAL/VAH Bounce Strategy Wait for price to approach VAL (support) or VAH (resistance) Look for signal confirmation at these critical levels Enter with tight stops beyond the Value Area Target opposite boundary or next session's levels Strategy 2: Order Block + Volume Confluence Identify order block alignment with VAL/VAH Wait for signal within the confluence zone Enter on signal with stop beyond order block Use LVN areas as acceleration zones for targets Strategy 3: LVN/HVN Strategy LVN (Green) Areas: "Go Zones" - expect quick price movement through low volume HVN (Red) Areas: "Stop Zones" - expect resistance and potential reversals NPOC Areas: "Fill Zones" - price often returns to fill single print gaps Strategy 4: Multi-Session Analysis Use Daily/Weekly for major structure context Use 4H for intermediate levels Use 1H for precise entry timing Ensure all timeframes align before taking signals Strategy 5: Fibonacci + Volume Profile Buy signals at 61.8% or 78.6% fibonacci near VAL Sell signals at 61.8% or 78.6% fibonacci near VAH Use 88.6% level as final support/resistance before major moves 50% level often aligns with POC for confluence Signal Quality Assessment Grade A Signals (Highest Probability): Signal at VAL/VAH with order block confluence Fibonacci level alignment (61.8%, 78.6%) Volume profile shows 70%+ dominance in signal direction Multiple timeframe structure alignment Signal occurs during high-volume sessions (London/NY) Grade B Signals (Moderate Probability): Signal near POC with some confluence Fibonacci 50% or 38.2% alignment Mixed volume profile readings (50-70% dominance) Some timeframe alignment present Signal during overlap sessions Grade C Signals (Lower Probability): Signal with minimal confluence Weak fibonacci alignment or none Volume profile neutral or against signal Conflicting timeframe signals Signal during low-volume periods Risk Management Guidelines Position Sizing Based on Signal Quality: Grade A: Standard position size Grade B: Reduced position size (50-75%) Grade C: Minimal position size (25%) or skip entirely Stop Loss Placement: Beyond order block boundaries Outside Value Area (VAL/VAH) Below/above fibonacci confluence levels Account for session volatility ranges Profit Targets: First target: Opposite VAL/VAH boundary Second target: Next session's key levels Final target: Major order blocks or fibonacci extensions Credits & Attribution Original components derived from: Market Sessions & Volume Profile by © Leviathan (Mozilla Public License 2.0) Volume Profile elements inspired by @LonesomeTheBlue's volume profile script Pivot Order Blocks by TradingWolf / © MensaTrader (Mozilla Public License 2.0) Auto Fibonacci Retracement code (public domain) Significant enhancements and modifications include: Advanced LVN/HVN detection and visualization Bull/Bear percentage analysis for Mode 2/3 Comprehensive alert system with market context Integrated buy/sell signals at key levels Performance optimizations and extended session support Enhanced Mode 2/3 with percentage pressure analysis Important Disclaimers This indicator is a technical analysis tool designed for educational purposes. It does not provide financial advice, investment recommendations, or trading signals that guarantee profits. All trading involves substantial risk of loss, and past performance does not guarantee future results. Users should conduct their own research, understand the risks involved, and consider consulting with qualified financial advisors before making trading decisions. The signals and analysis provided are based on historical price patterns and volume data, which may not predict future market movements accurately. Best Practices Never trade signals blindly - always consider volume profile context Wait for confluence between multiple tools before entering Respect the Value Area - avoid buying above VAH or selling below VAL Use session context - Asian ranges vs London/NY breakouts Practice proper risk management - position size based on signal quality Understand the bigger picture - use multiple timeframes for context Remember: Like the IDKFA cheat code, having all the tools doesn't guarantee success. The key is learning to use them together effectively and understanding when NOT to take a signal is often more important than knowing when to take one.
Pine Script® indicator
by MessyJess
7
Liquidity Sweep Candlestick Pattern with MA Filter📌 Liquidity Sweep Candlestick Pattern with MA Filter This custom indicator detects liquidity sweep candlestick patterns—price action events where the market briefly breaks a previous candle’s high or low to trap traders—paired with optional filters such as moving averages, color change candles, and strictness rules for better signal accuracy. 🔍 What is a Liquidity Sweep? A liquidity sweep occurs when the price briefly breaks the high or low of a previous candle and then reverses direction. These events often occur around key support/resistance zones and are used by institutional traders to trap retail positions before moving the price in the intended direction. 🟢 Bullish Liquidity Sweep Criteria The current candle is bullish (closes above its open). The low of the current candle breaks the low of the previous candle. The candle closes above the previous candle’s open. Optionally, in Strict mode, it must also close above the previous candle’s high. Optionally, it can be filtered to only show if the candle changed color from the previous one (e.g., red to green). Can be filtered to only show when the price is above or below a moving average (if MA filter is enabled). 🔴 Bearish Liquidity Sweep Criteria The current candle is bearish (closes below its open). The high of the current candle breaks the high of the previous candle. The candle closes below the previous candle’s open. Optionally, in Strict mode, it must also close below the previous candle’s low. Optionally, it can be filtered to only show if the candle changed color from the previous one (e.g., green to red). Can be filtered to only show when the price is above or below a moving average (if MA filter is enabled). ⚙️ Features & Customization ✅ Signal Strictness Choose between: Less Strict (default): Basic wick break and close conditions. Strict: Must close beyond the wick of the previous candle. ✅ Color Change Candles Only Enable this to only show patterns when the candle color changes (e.g., from red to green or green to red). Helps filter fake-outs. ✅ Moving Average Filter (optional) Supports several types of MAs: SMA, EMA, WMA, VWMA, RMA, HMA Choose whether signals should only appear above or below the selected moving average. ✅ Custom Visuals Show short (BS) or full (Bull Sweep / Bear Sweep) labels Plot triangles or arrows to represent bullish and bearish sweeps Customize label and shape colors Optionally show/hide the moving average line ✅ Alerts Includes alert options for: Bullish sweep Bearish sweep Any sweep 📈 How to Use Add the indicator to your chart. Configure the strictness, color change, or MA filters based on your strategy. Observe signals where price is likely to reverse after taking out liquidity. Use with key support/resistance levels, order blocks, or volume zones for confluence. ⚠️ Note This tool is for educational and strategy-building purposes. Always confirm signals with other indicators, context, and sound risk management.
Pine Script® indicator
by OLLIE_MAC
Enhanced Stock Ticker with 50MA vs 200MADescription The Enhanced Stock Ticker with 50MA vs 200MA is a versatile Pine Script indicator designed to visualize the relative position of a stock's price within its short-term and long-term price ranges, providing actionable bullish and bearish signals. By calculating normalized indices based on user-defined lookback periods (defaulting to 50 and 200 bars), this indicator helps traders identify potential reversals or trend continuations. It offers the flexibility to plot signals either on the main price chart or in a separate lower pane, leveraging Pine Script v6's force_overlay functionality for seamless integration. The indicator also includes a customizable ticker table, visual fills, and alert conditions for automated trading setups. Key Features Dual Lookback Indices: Computes short-term (default: 50 bars) and long-term (default: 200 bars) indices, normalizing the closing price relative to the high/low range over the specified periods. Flexible Signal Plotting: Users can toggle between plotting crossover signals (triangles) on the main price chart (location.abovebar/belowbar) or in the lower pane (location.top/bottom) using the Plot Signals on Main Chart option. Crossover Signals: Generates bullish (Golden Cross) and bearish (Death Cross) signals when the short or long index crosses above 5 or below 95, respectively. Visual Enhancements: Plots short-term (blue) and long-term (white) indices in a separate pane with customizable lookback periods. Includes horizontal reference lines at 0, 20, 50, 80, and 100, with green and red fills to highlight overbought/oversold zones. Dynamic fill between indices (green when short > long, red when long > short) for quick trend visualization. Displays a ticker and legend table in the top-right corner, showing the symbol and lookback periods. Alert Conditions: Supports alerts for bullish and bearish crossovers on both short and long indices, enabling integration with TradingView's alert system. Technical Innovation: Utilizes Pine Script v6's force_overlay parameter to plot signals on the main chart from a non-overlay indicator, combining the benefits of a separate pane and chart-based signals in a single script. Technical Details Calculation Logic: Uses confirmed bars (barstate.isconfirmed) to calculate indices, ensuring reliability by avoiding real-time bar fluctuations. Short-term index: (close - lowest(low, lookback_short)) / (highest(high, lookback_short) - lowest(low, lookback_short)) * 100 Long-term index: (close - lowest(low, lookback_long)) / (highest(high, lookback_long) - lowest(low, lookback_long)) * 100 Signals are triggered using ta.crossover() and ta.crossunder() for indices crossing 5 (bullish) and 95 (bearish). Signal Plotting: Main chart signals use force_overlay=true with location.abovebar/belowbar for precise alignment with price bars. Lower pane signals use location.top/bottom for visibility within the indicator pane. Plotting is controlled by boolean conditions (e.g., bullishLong and plot_on_chart) to ensure compliance with Pine Script's global scope requirements. Performance Considerations: Optimized for efficiency by calculating indices only on confirmed bars and using lightweight plotting functions. How to Use Add to Chart: Copy the script into TradingView's Pine Editor and add it to your chart. Configure Settings: Short Lookback Period: Adjust the short-term lookback (default: 50 bars) to match your trading style (e.g., 20 for shorter-term analysis). Long Lookback Period: Adjust the long-term lookback (default: 200 bars) for broader market context. Plot Signals on Main Chart: Check this box to display signals on the price chart; uncheck to show signals in the lower pane. Interpret Signals: Golden Cross (Bullish): Green (long) or blue (short) triangles indicate the index crossing above 5, suggesting a potential buying opportunity. Death Cross (Bearish): Red (long) or white (short) triangles indicate the index crossing below 95, signaling a potential selling opportunity. Set Alerts: Use TradingView's alert system to create notifications for the four alert conditions: Long Index Valley, Long Index Peak, Short Index Valley, and Short Index Peak. Customize Visuals: The ticker table displays the symbol and lookback periods in the top-right corner. Adjust colors and styles via TradingView's settings if desired. Example Use Cases Swing Trading: Use the short-term index (e.g., 50 bars) to identify short-term reversals within a broader trend defined by the long-term index. Trend Confirmation: Monitor the fill between indices to confirm whether the short-term trend aligns with the long-term trend. Automated Trading: Leverage alert conditions to integrate with bots or manual trading strategies. Notes Testing: Always backtest the indicator on your chosen market and timeframe to validate its effectiveness. Optional Histogram: The script includes a commented-out histogram for the index difference (index_short - index_long). Uncomment the plot(index_diff, ...) line to enable it. Compatibility: Built for Pine Script v6 and tested on TradingView as of May 27, 2025. Acknowledgments This indicator was inspired by the need for a flexible tool that combines lower-pane analysis with main chart signals, made possible by Pine Script's force_overlay feature. Share your feedback or suggestions in the comments below, and happy trading!
Pine Script® indicator
by chuckaschultz
WebhookGeneratorLibrary "WebhookGenerator" Generates Json objects for webhook messages. GenerateOT(license_id, symbol, action, order_type, trade_type, size, price, tp, sl, risk, trailPrice, trailOffset)   CreateOrderTicket: Establishes a order ticket.   Parameters:      license_id (string) : Provide your license index      symbol (string) : Symbol on which to execute the trade      action (string) : Execution method of the trade : "MRKT" or "PENDING"      order_type (string) : Direction type of the order: "BUY" or "SELL"      trade_type (string) : Is it a "SPREAD" trade or a "SINGLE" symbol execution?      size (float) : Size of the trade, in units      price (float) : If the order is pending you must specify the execution price      tp (float) : (Optional) Take profit of the order      sl (float) : (Optional) Stop loss of the order      risk (float) : Percent to risk for the trade, if size not specified      trailPrice (float) : (Optional) Price at which trailing stop is starting      trailOffset (float) : (Optional) Amount to trail by   Returns: Return Order string
Pine Script® library
by pinetraderinc
Borrow Fee & Squeeze TrackerSqueeze tracker. This script helps identify potential short squeeze setups by detecting two key indicators: unusual volume and significant price changes. The script combines both volume and price changes to give a more reliable indication of potential squeeze opportunities. When both criteria are met, it signals that there may be unusual market activity. The script also allows you to set up automatic alerts when both the volume and price change exceed thresholds, so you can react quickly to potential opportunities without constantly monitoring the charts. Once added, you can set an alert: Click on the Alert button In the "Condition" dropdown, select the Squeeze Alert that was created. Set the alert options Now, when the script detects both a volume spike and a price change spike, it will trigger an alert based on your settings. Enjoy!
Pine Script® indicator
by Nigh8Tradr
Long-Only MTF EMA Cloud StrategyOverview: The Long-Only EMA Cloud Strategy is a powerful trend-following strategy designed to help traders identify and capitalize on bullish market conditions. By utilizing an Exponential Moving Average (EMA) Cloud, this strategy provides clear and reliable signals for entering long positions when the market trend is favorable. The EMA cloud acts as a visual representation of the trend, making it easier for traders to make informed decisions. This strategy is ideal for traders who prefer to trade in the direction of the trend and focus exclusively on long positions. Key Features: EMA Cloud: The strategy uses two EMAs (short and long) to create a dynamic cloud. The cloud is bullish when the short EMA is above the long EMA, indicating a strong upward trend. The cloud is bearish when the short EMA is below the long EMA, indicating a downward trend or consolidation. Long Entry Signals: A long position is opened when the EMA cloud turns bullish, which occurs when the short EMA crosses above the long EMA. This crossover signals a potential shift in market sentiment from bearish to bullish, providing an opportunity to enter a long trade. Adjustable Timeframe: The EMA cloud can be calculated on the same timeframe as the chart or on a higher/lower timeframe for multi-timeframe analysis. This flexibility allows traders to adapt the strategy to their preferred trading style and time horizon. Risk Management: The strategy includes adjustable stop loss and take profit levels to help traders manage risk and lock in profits. Stop loss and take profit levels are calculated as a percentage of the entry price, ensuring consistency across different assets and market conditions. Alerts: Built-in alerts notify you when a long entry signal is generated, ensuring you never miss a trading opportunity. Alerts can be customized to suit your preferences, providing real-time notifications for potential trades. Visualization: The EMA cloud is plotted on the chart, providing a clear visual representation of the trend. Buy signals are marked with a green label below the price bar, making it easy to identify entry points. How to Use: Add the Script: Add the script to your chart in TradingView. Set EMA Lengths: Adjust the Short EMA Length and Long EMA Length in the settings to suit your trading style. For example, you might use a shorter EMA (e.g., 21) for more responsive signals or a longer EMA (e.g., 50) for smoother signals. Choose EMA Cloud Resolution: Select the EMA Cloud Resolution (timeframe) for the cloud calculation. You can choose the same timeframe as the chart or a different timeframe (higher or lower) for multi-timeframe analysis. Adjust Risk Management: Set the Stop Loss (%) and Take Profit (%) levels according to your risk tolerance and trading goals. For example, you might use a 1% stop loss and a 2% take profit for a 1:2 risk-reward ratio. Enable Alerts: Enable alerts to receive notifications for long entry signals. Alerts can be configured to send notifications via email, SMS, or other preferred methods. Monitor and Trade: Monitor the chart for buy signals and execute trades accordingly. Use the EMA cloud as a visual guide to confirm the trend direction before entering a trade. Ideal For: Trend-Following Traders: This strategy is perfect for traders who prefer to trade in the direction of the trend and capitalize on sustained price movements. Long-Only Traders: If you prefer to focus exclusively on long positions, this strategy provides a clear and systematic approach to identifying bullish opportunities. Multi-Timeframe Analysts: The adjustable EMA cloud resolution allows you to analyze trends across different timeframes, making it suitable for both short-term and long-term traders. Risk-Averse Traders: The inclusion of stop loss and take profit levels helps manage risk and protect your capital.
Pine Script® strategy
by Charted_Trades
Engulfing Sweeps - Milana TradesEngulfing Sweeps The Engulfing Sweeps Candle is a candlestick pattern that: 1)Takes liquidity from the previous candle’s high or low. 2)Fully engulfs previous candles upon closing. 3)Indicates strong buying or selling pressure. 4)Helps determine the bias of the next candle. Logic Behind Engulfing Sweeps If you analyze this candle on a lower timeframe, you’ll often see popular models like PO3 (Power of Three) or AMD (Accumulation – Manipulation – Distribution). Once the candle closes, the goal is to enter a position on the retracement of the distribution phase. How to Use Engulfing Sweeps? Recommended Timeframes: 4H, Daily, Weekly – these levels hold significant liquidity. Personally, I prefer 4H, as it provides a solid view of mid-term market moves. Step1 - Identify Engulfing Sweep Candle Step 2-Switch to a lower timeframe (15m or 5m).And you task identify optimal trade entry Look for an entry pattern based on: FVG (Fair Value Gap) OB (Order Block) FIB levels (0/0.25/0.5/ 0.75/ 1) Wait for confirmation and take the trade. Automating with TradingView Alerts To avoid missing the pattern, you can set up alerts using a custom script. Once the pattern forms, TradingView will notify you so you can analyze the chart and take action. This approch helps me be more freedom
Pine Script® indicator
by MilanaArsenovna
5
Custom Previous High/Low + Breakout AlertsThis indicator plots the previous high and low of the selected timeframe and alerts you when the price breaks either level. To prevent spam, it triggers only once per period. If both the high and low break within the same period, you will receive an alert for each, but no duplicates if price hovers around these levels. How to Set Up Alerts 1. Choose Your Timeframe - In the indicator settings, select the timeframe for the high/low reference. - Example: If you select 1 hour, the indicator will plot the previous 1-hour high and low and alert you when either level is broken 2. Create an Alert - Condition → High/Low Break Alerts - Function → Any alert() function call Optional: - If you want alerts only for high breakouts or low breakouts, select High Breakout or Low Breakout and use "Once Per Bar" as the trigger. (It will still alert only once per period.) 3. Setting Alerts for Multiple Timeframes - If you want to create another alert for a different timeframe, first select the new timeframe in the indicator settings, then create a new alert - Note: Previous alerts will continue to notify you based on the timeframe they were originally set for, even if you change the timeframe in the indicator settings.
Pine Script® indicator
by Ufonose
8
Time-based Alerts for Trading Windows🌟 Time-based Alerts for Trading Windows 🌐📈 This is a re-uploaded script as the previous one got hidden. This Time-based Alerts for Trading Windows script is a highly customizable and reliable tool designed to assist traders in managing automated strategies or manually monitoring specific market conditions. Inspired by CrossTrade's Time-based Alert, this script is tailored for those who rely on precise time windows to trigger actions, such as sending webhook signals or managing Expert Advisors (EAs). Whether you are a scalper, day trader, or algorithmic trader, this script empowers you to stay on top of your trades with fully customizable time-based alerts. 🛠️ Customizable Time Alerts This indicator allows you to create up to 12 unique time windows by specifying the exact hour and minute for each alert. Each time window corresponds to an individual alert condition, making it perfect for managing trades during specific market sessions or key time periods. For example: Alert 1 can be set at 9:30 AM (market open). Alert 2 can be set at 3:55 PM (just before market close). Each alert can be toggled on or off in the indicator settings, allowing you to manage alerts without having to reconfigure your script. You can adjust the colours to fit any colour scheme you like! 🕒 Odd and Even Time Alerts The script comes with three built-in alert type categories: Odd Alerts (marked with a green triangle on the chart): These correspond to odd-numbered inputs like Alert 1, Alert 3, Alert 5, and so on. Even Alerts (marked with a red triangle on the chart): These correspond to even-numbered inputs like Alert 2, Alert 4, Alert 6, and so on. You can also customize all 12 alerts individually to include a custom alert message These alerts serve as a convenient way to differentiate between multiple trading strategies or market conditions. You can customize alert messages for odd and even alerts directly from TradingView’s alert panel. 🔗 Webhook Integration for Automation This script is fully compatible with webhook-based automation. By configuring your alerts in TradingView, you can send signals to trading bots, EAs, or any third-party system. For example, you can: Turn off an EA at a specific time (e.g., 3:55 PM EST). Send buy/sell signals to your bot during predefined trading windows. Simply use TradingView’s alert message editor to format webhook payloads for your automation system. 🌐 Timezone Flexibility Trading happens across multiple time zones, and this script accounts for that. You can toggle between: Eastern Time (New York): Ideal for most US-based markets. Central Time (Exchange): Useful for futures and commodities traders. This ensures your alerts are always in sync with your preferred time zone, eliminating confusion. 🎨 Visual Indicators The script plots visual markers directly on your chart to indicate active alerts: Up Facing Triangles: Represent odd-numbered alerts, providing a quick reference for these time windows. Down Facing Triangles: Represent even-numbered alerts, helping you track different strategies or conditions. These visual markers make it easy to see when alerts are triggered, even at a glance. 📈 Practical Use Case Let’s say you’re trading the USTEC index on a 1-minute chart. You want to: Turn off your trading bot at 16:55 EST to avoid after-market volatility. Trigger a re-entry signal at 17:30 EST to capture moves during the Asian session. Visually monitor these actions on your chart for easy reference. This script makes it possible with precision alerts and webhook integration. Simply configure the time windows in the settings and set up your alerts in TradingView. 🚨 How to Set Up Alerts Enable or Disable Alerts: Use the script’s settings to toggle specific alerts on or off as needed. Set Custom Time Windows: Define the hour and minute for each alert in the settings panel. Create Alerts in TradingView: Go to the TradingView alert panel. Select the condition (e.g., "Odd Time-based Alert (Green)" or "Even Time-based Alert (Red)"). Customize the alert message for webhook integration or personal notification. Choose the trigger type: Once Per Bar or Once Per Bar Close to keep the alert active. Integrate with Webhooks: Use the alert message field to format payloads for automation systems like MT4, MT5, or third-party bots. 📋 Key Notes Alerts can trigger indefinitely if set to "Once Per Bar" or "Once Per Bar Close". Always ensure the expiration date is set far in the future to avoid unexpected alert deactivation. Test webhook messages and alert configurations thoroughly before using them in live trading. This script is a powerful addition to your trading toolbox, offering precision, flexibility, and automation capabilities. Whether you’re turning off an EA, managing trades during market sessions, or automating strategies via webhooks, this script is here to support you. Start using the Time-based Alerts for Trading Windows today and trade with confidence! 🚀✨
Pine Script® indicator
by xhmxdir
2
BS | Buy&Sell Signals With EMAKey Features: EMA Intersections: Generates clear buy and sell signals based on predefined EMA crossings. 5 EMA Lines: Visualize market trends with five distinct EMA lines plotted on the chart. Support and Resistance Levels: Easily identify crucial support and resistance levels with our integrated marker. Comprehensive Indicator Panel: At the bottom of the chart, track Stochastic, RSI, Supertrend, and SMA across multiple timeframes (1m, 5m, 15m, 1H, 4H, Daily, Weekly). Fully Customizable: Almost every indicator within the tool is adjustable to suit your preferences and trading style. Alarm Feature: Set up alarms to stay informed of important market movements. Unlock the full potential of your trading strategy with BS | Buy&Sell Signals With EMA. Customize, analyze, and trade with confidence. created by @bahadirsezer
Pine Script® indicator
by bahadirsezer
4