Get started

Cycles

Lindsey Measured Move Price TargetsLindsey is a pivot-structure target tool that auto-maps a simple 3-point swing sequence (P1 → P2 → P3) and projects a symmetry-based target (P4), then prints it as a clean “🎯” balloon on your chart. It’s designed to give traders a fast, repeatable way to visualize where the next measured move could resolve—without cluttering the price action. How it works The script detects pivot highs/lows using your chosen Left/Right Swing Bars (pivot confirmation). It tracks a three-point structure: Bull case: P1 = pivot low, P2 = pivot high, P3 = higher pivot low Bear case: P1 = pivot high, P2 = pivot low, P3 = lower pivot high Once a valid P3 prints, it calculates a projected target: Bull target: P4 = P2 + (P2 − P3) Bear target: P4 = P2 − (P3 − P2) The target is displayed as a right-shifted balloon, so you can keep it visible ahead of current candles. How to operate it (practical workflow) Set Swing Sensitivity Left Swing Bars / Right Swing Bars control how “strict” pivots are. Lower values = more signals (noisier). Higher values = fewer, cleaner structures. Place the balloon where you want it Balloon Right Offset (bars) moves the 🎯 label forward in time for readability. Vertical Offset nudges the label up/down in price units to avoid overlapping candles or other tools. Lock or keep it live Turn Lock Target Balloon ON to keep the last target fixed on-chart. Leave it OFF to always display the most recent valid projection. Style it to your theme Customize bull/bear balloon colors, text color, and P1/P2/P3 marker colors. Why it’s useful (benefits) Clear targets without guesswork: turns swing structure into a consistent measured-move projection. Less chart noise: one readable target balloon instead of multiple lines and annotations. Works across assets/timeframes: pivots adapt naturally to volatility and timeframe. Trader-friendly controls: offset + vertical spacing + lock mode make it easy to integrate with existing layouts. Notes / best practices Pivots confirm after the right-side bars complete—so targets are intentionally non-repainting in structure detection, but they appear with that normal pivot confirmation delay. For choppy ranges, increase pivot bars to reduce whipsaw targets; for trends, slightly lower them to catch more swing opportunities.
Pine Script® indicator
by Dinjin
Fractal HTF Lines The indicator “Fractal HTF Lines” draws time‑based vertical lines that mark where higher‑timeframe periods start on your chart. It adapts its behavior to the timeframe you are currently viewing. 4‑hour timeframe On a 4‑hour chart, the indicator draws a vertical line on the first 4‑hour bar of each new trading day. This lets you quickly see where one day ends and the next begins without turning on session breaks. Daily timeframe On a daily chart, the indicator draws a vertical line on the first trading day of each new week. Visually, this separates weeks so you can see weekly structure while still trading and analyzing on the daily timeframe. Weekly timeframe On a weekly chart, the indicator draws a vertical line on the first trading week of each new month. That way you can identify monthly boundaries directly on the weekly chart and better align your analysis with monthly cycles. Customization The indicator includes settings to control: Line color: You can choose any color from the palette. Line width: You can adjust the thickness to make lines more or less prominent. Line opacity: You can make lines more transparent or more solid, depending on how strong you want the visual emphasis.
Pine Script® indicator
by HasselFX
ZLT - Date and Time MarkerPine Script v5 indicator called “DateTime Marker” that overlays on the chart and marks bars whose timestamp matches a user-defined schedule. When a bar “matches,” it can draw: a vertical line through the bar, a label with a time/date string, and a triangle marker below the bar (always plotted on matches). What you can configure Marker Type (the matching rule) You choose one of five modes: Every Minute Inputs: everyNMinutes (default 15), minuteOffset (default 0) Match condition: minute % everyNMinutes == minuteOffset Example with defaults: marks bars at :00, :15, :30, :45 each hour. Hourly Inputs: everyNHours (default 4), hourlyMinute (default 0) Match condition: hour % everyNHours == 0 AND minute == hourlyMinute Example with defaults: marks bars at 00:00, 04:00, 08:00, 12:00, 16:00, 20:00 (at minute 00). Daily Time Inputs: dailyHour (default 10), dailyMinute (default 0) Match condition: hour == dailyHour AND minute == dailyMinute Example with defaults: marks 10:00 every day. Weekly Day & Time Inputs: weekDay (default Tuesday), weeklyHour (default 16), weeklyMinute (default 0) It converts the weekday name to Pine’s dayofweek number via getDayNumber(). Match condition: dayofweek == targetDay AND hour == weeklyHour AND minute == weeklyMinute Example with defaults: marks Tuesday 16:00. Monthly Date & Time Inputs: monthlyDay (default 2), monthlyHour (default 23), monthlyMinute (default 0) Match condition: dayofmonth == monthlyDay AND hour == monthlyHour AND minute == monthlyMinute Example with defaults: marks the 2nd day of each month at 23:00. Visual settings showLine: whether to draw the vertical line. lineStyle: Solid/Dashed/Dotted (mapped to Pine line styles by getLineStyle()). lineColor, lineWidth: styling for the line (width is rounded to an integer because Pine line width is integer). showLabel: whether to draw a label. labelColor: background color of the label (text is forced white). What happens when a bar matches When isMatch becomes true on a bar: Vertical line: line.new() at that bar’s bar_index, from low to high, extended extend.both (so it spans the full chart vertically). Label: label.new() at the bar’s high, with mode-specific text: Minute/Hourly/Daily: "HH:mm" Weekly: "Tuesday HH:mm" (or whatever day selected) Monthly: "Day 2 - HH:mm" (or chosen day) Triangle marker: plotshape() draws a triangle up below the bar on every match (this happens regardless of showLine / showLabel). Important practical implications This uses the bar’s exchange/chart time (TradingView’s time, hour, minute, etc.), so results depend on the symbol/session and chart timezone settings. On timeframes coarser than 1 minute, “Every Minute” still checks only the bar’s timestamp minute value; it won’t mark intra-bar minutes that don’t exist as separate bars. Because it can create many objects (lines/labels), it sets max_labels_count=500. Lines are not capped here, so very dense marking can still clutter the chart. If you tell me your intended use (e.g., “mark NY open,” “mark every 15m candle close,” “mark macro events weekly”), I can point out whether the current matching logic fits that precisely or needs adjustments (sessions, timezones, avoiding duplicates, limiting lines, etc.).
Pine Script® indicator
by Kaeya
Dual MACD CrossWhat Is This Indicator? This indicator is a visual tool for reading changes in market momentum. Instead of giving buy or sell orders, it helps you see when the market’s short-term behavior starts to differ from its underlying direction. Think of it as a way to observe shifts in mood rather than make automatic decisions. What Do the Lines Mean? You will see three visual elements: The thin green line represents the market’s short-term momentum. It reacts quickly to recent price changes and shows what the market is doing right now. The thicker white line represents the market’s reference trend. It moves more slowly and reflects the broader, more stable direction of the market. The yellow dotted line is the zero baseline. It does not generate signals. Its only purpose is to help you visually judge whether momentum is generally positive (above zero) or negative (below zero). How Should This Indicator Be Read? The key is the relationship between the green and white lines. When the green line is above the white line, short-term momentum is stronger than the market’s reference trend. When the green line is below the white line, short-term momentum is weaker. The indicator is not concerned with how high or low the lines are by themselves. What matters is how they interact. What Do the Triangle Markers Mean? The small triangle markers highlight moments of transition. An upward triangle appears when the green line crosses above the white line. This suggests that short-term momentum is beginning to outperform the broader trend. A downward triangle appears when the green line crosses below the white line. This suggests that momentum is weakening relative to the broader trend. These markers are attention points, not commands. They indicate potential change, not certainty. Why Is the Zero Line Important? The zero line provides context. A crossover that happens above the zero line occurs while the market is already in a relatively strong state. A crossover below the zero line happens in a weaker environment and may represent a failed move or an early attempt at reversal. The same crossover can mean very different things depending on its position relative to zero. What Is This Indicator Best Used For? This indicator is best used to: Observe early signs of trend changes Compare short-term momentum versus underlying direction Confirm what you are already seeing in price action or other indicators It is not designed to: Predict tops or bottoms precisely Act as a standalone buy/sell system Measure overbought or oversold conditions A Simple Analogy Imagine driving a car. The green line is how hard you are pressing the accelerator. The white line is your current speed. The yellow zero line is the difference between moving forward or backward. The triangles mark moments when acceleration begins to change the car’s actual movement. The indicator helps you notice when effort starts to translate into direction. The Right Way to Use It This indicator does not tell you what to do. It encourages you to ask better questions: Is momentum starting to lead or lag? Is this change supported by price structure? Does the broader context confirm or contradict this signal? Used this way, it becomes a tool for awareness, not prediction. If you’d like, I can also provide: A one-paragraph version for documentation A training script for beginners Or a minimal tooltip-style explanation for sharing with others
Pine Script® indicator
by semiose71
RSI Ladder TP Strategy v1.0 Overview This strategy is an RSI-based reversal entry system with a ladder-style take-profit mechanism. It supports Long-only, Short-only, or Both directions and provides optional Average Entry Price, Stop Loss, and Take Profit reference lines on the chart. Entry Rules Long Entry: RSI crosses above the Oversold level (default: 20). Short Entry: RSI crosses below the Overbought level (default: 80). Optional: If enabled, the script will close the current position when an opposite signal appears before opening a new one. Exit Rules (Ladder Take Profit) Take profit is placed as a ladder using tpLevels and tpStepPct. Example (default tpStepPct = 1%, tpLevels = 10): TP1 at +1%, TP2 at +2%, … TP10 at +10% (relative to current average entry price). Each TP level closes tpClosePct of the remaining position, meaning it scales out geometrically: If tpClosePct = 50% → remaining position becomes 50%, then 25%, then 12.5%, etc. Stop Loss Optional stop loss is placed at slPct (%) away from the average entry price: Long: avg * (1 - slPct%) Short: avg * (1 + slPct%) Visual Lines Average Entry Price Line: current strategy.position_avg_price Stop Loss Line: based on slPct Next TP Line: shows the estimated next TP level based on current profit% All TP Lines: optional (can clutter the chart) ============================================================== Recommended Use This strategy is best used on markets with strong mean-reversion behavior. For exchanges/bots that do not support hedge mode in a single strategy, run two separate instances: One set to Long Only One set to Short Only
Pine Script® strategy
by ORYXA
TZ - India VIX Volatility ZonesTZ – India VIX Volatility Zones is a long-term volatility analysis indicator designed to visually map important India VIX regimes using clearly defined horizontal zones and labels. The indicator highlights how market volatility cycles between complacency, normal conditions, elevated risk, and panic phases. These zones are based on historical behavior of India VIX and help traders understand when risk is underpriced or overstretched. This tool is especially useful for: Index traders Options sellers and buyers Risk management and regime filtering Long-term volatility study How It Works The script plots static, historically significant volatility zones on the India VIX chart and visually separates them using shaded bands and labels. Volatility Zones Explained 1.Extreme Low Volatility (VIX 8–10) Indicates market complacency and underpriced risk. Often precedes volatility expansion. 2.Low Volatility (VIX 10–13) Stable market conditions with controlled movement. 3.Normal Volatility (VIX 13–18) Healthy market behavior and balanced risk. 4.High Volatility (VIX 18–25) Rising uncertainty and increased intraday swings. 5.Panic Zone (VIX 25–35+) High fear environment, usually during major events or crises. How Traders Can Use This Indicator Identify volatility regimes before choosing option strategies Avoid aggressive short-volatility trades during extreme zones Prepare for volatility expansion during low-VIX phases Use as a market risk context tool alongside price action This indicator does not provide buy/sell signals. It is designed for contextual analysis and decision support. Best Usage Apply on India VIX (NSE:INDIAVIX) Works best on Weekly and Monthly timeframes Can be combined with index charts for volatility-based risk assessment Disclaimer This indicator is for educational and analytical purposes only. It does not constitute financial advice or trade recommendations. Users should apply proper risk management and confirm signals using additional analysis.
Pine Script® indicator
by TradZoo
Pivot Edge ProOverview Smart Pivot Analytics is a highly accurate technical analysis tool designed to identify and validate significant price levels. Unlike standard pivot indicators that only mark recent highs, this tool backtests each identified pivot against thousands of historical candlesticks to calculate its real-world “success rate.” Key Features Historical Backtesting: The indicator scans up to 4,900 historical columns to find every instance where price interacted with a specific pivot level. Strength Score (%): Each level is assigned a percentage score based on its reversal rate. It calculates how many times the price has successfully reached and rejected the level, providing a statistical “hit rate.” Dynamic Hit Counter: Displays the exact number of times a level has been tested (hit), helping traders distinguish between new levels and established “old” levels. Smart Filtering: To keep the chart clean, the indicator automatically filters out weak levels and prevents “clutter” by merging levels that are too close together. Infinite Left Projection: Lines extend left to infinity, allowing traders to see the historical significance of a level across the entire price history at a glance. How to Trade with It Red Levels (High Power > 75%): These are “Top Reaction Zones”. Expect a strong price rejection or significant breakout when these levels are tested. Orange Levels (Medium Power): Suitable for profit targets or as secondary confirmation for entering a trade. Encounter: Use these levels in conjunction with your existing strategy. When a high power pivot aligns with your entry signal, the probability of a successful trade increases significantly. Technical Parameters Lookback Period: Defines how far back in history the script calculates power. Touch Radius: The "sensitivity" of the level (how close the price has to get to be considered a "hit"). Minimum Strength: A filter to show only the most reliable levels.
Pine Script® indicator
by nirree11
Sector Rotation ULTIMATE: 7 Narrativas IndependientesSector Rotation ULTIMATE: Crypto Narrative Rotation (7 Independent Sectors) Advanced indicator displaying the relative strength of major crypto sectors through 7 independently normalized lines (0-100): • Layer1 (ETH, SOL, BNB, TON, etc.) - Pink • Enterprise (XRP, HBAR, XLM, QNT, VET) - Yellow • DeFi (UNI, AAVE, MKR, LDO, CRV, etc.) - Cyan • Memecoins (SHIB, DOGE, PEPE, WIF, FLOKI, BONK) - Green • AI (TAO, FET, ICP, GRT, etc.) - Orange • L2 / Scalability (ARB, OP, MATIC, STRK) - Purple • RWA + Infra (ONDO, LINK) - Brown Each sector sums the dominance of its top coins (40 total) and is normalized independently so the lines cross constantly, revealing real capital rotations. - Colored fills to visually highlight the leading sector - Works perfectly on any timeframe (clean daily data, no intraday noise) - Ideal for spotting altseason, sector rotations, and entry timing Use on CRYPTOCAP:TOTAL. The definitive narrative oscillator for 2026! #Crypto #Altcoins #SectorRotation #DeFi #Memecoins #AI #RWA
Pine Script® indicator
by leanzambra100
4MA / 4MA[1] Forward Projection with 4 SD Forecast Bands4MA / 4MA Projection + 4 SD Bands + Cross Table is a forward-projection tool built around a simple moving average pair: the 4-period SMA (MA4) and its 1-bar lagged value (MA4 ). It takes a prior MA behavior pattern, projects that structure forward, and wraps the projected mean path with four Standard Deviation (SD) bands to visualize probable future price ranges. This indicator is designed to help you anticipate: Where the MA structure is likely to travel next How wide the “expected” future price corridor may be Where a future MA4 vs MA4 crossover is most likely to occur When the real (live) crossover actually prints on the chart What you see on the chart 1) Live moving averages (current market) MA4 tracks the short-term mean of price. MA4 is simply the previous bar’s MA4 value (a 1-bar lag). Their relationship (MA4 above/below MA4 ) gives a clean, minimal read on trend alignment and directional bias. 2) Projected MA path (forward curve) A forward “ghost” of the MA structure is drawn ahead of price. This projected curve represents the indicator’s best estimate of how the moving average structure may evolve if the market continues to rhyme with the selected historical behavior window. 3) 4 Standard Deviation bands (predictive future price ranges) Surrounding the projected mean path are four SD envelopes. Think of these as forecast corridors: Inner bands = tighter “expected” range Outer bands = wider “stress / extreme” range These bands are not a guarantee—rather, they’re a structured way to visualize “how far price can reasonably swing” around the projected mean based on observed volatility. 4) Vertical projection lines (most probable cross zone) Within the projected region you’ll see vertical lines running through the bands. These lines mark the most probable zone where MA4 and MA4 are expected to cross in the projection. In plain terms: The projected MAs are two curves. When those curves are forecasted to intersect, the script marks the intersection region with a vertical line. This gives you a forward “timing window” for a potential MA shift. 5) Cross Table (top-right) The table is your confirmation layer. It reports: Current MA4 value Current MA4 value Whether MA4 is above or below MA4 The most recent BUY / SELL cross event When a real, live crossover happens on the actual chart: It registers as BUY (MA4 crosses above MA4 ) Or SELL (MA4 crosses below MA4 ) …and the table updates immediately so you can confirm the event without guessing. How to use it Practical workflow Use the projected SD bands as future range context If price is projected to sit comfortably inside inner bands, the market is behaving “normally.” If price reaches outer bands, you’re in a higher-volatility / stretched scenario. Use vertical lines as a “watch zone” Vertical lines do not force a trade. They act like a forward “heads-up”: this is the most likely window for an MA crossover to occur if the projection holds. Use the table for confirmation When the crossover happens for real, the table is your confirmation signal. Combine it with structure (support/resistance, trendlines, market context) rather than trading it in isolation. Notes and best practices This is a projection tool: it helps visualize a structured forward hypothesis, not a certainty. SD bands are best used as forecast corridors (risk framing, range planning, and expectation management). The table is the execution/confirmation layer: it tells you what the MAs are doing now.
Pine Script® indicator
by Dinjin
Price Range CHoCH Alert🎯 Smart Money Concept (SMC) indicator that monitors a specific price level and alerts only when price touches that level AND subsequently creates a Change of Character (CHoCH). Key Features: • Set a custom price level to monitor • Detects CHoCH/BOS based on pivot highs/lows • Alerts ONLY when: Price touches level → CHoCH occurs • Visual confirmation with level line and status table • Configurable tolerance for precise level targeting • Works for both bullish and bearish scenarios Perfect for: ✓ Institutional level trading ✓ Key support/resistance breakouts ✓ Liquidity grab confirmations ✓ Structure break validation Simply set your target price level and let the indicator watch for the perfect SMC setup!
Pine Script® indicator
by cmacha2
Global Sessions Pro NY/London/Tokyo - O/C/H/LGLOBAL SESSIONS PRO — NY / LONDON / TOKYO Session Opens, Highs, Lows, Midpoints, Closes, Ranges & Killzones OVERVIEW Global Sessions Pro is a comprehensive session-mapping indicator designed for traders who rely on market structure, session context, and time-based behavior. The indicator automatically plots New York, London, and Tokyo sessions, including: • Session Open, High, Low, Midpoint, and Close • Prior session levels projected forward • Session range boxes • Right-side labeled price levels (clearly identified) • Stacked session summary labels (no overlap) • Optional killzones and overlap windows • Breakout alerts (prior or current session levels) The script is fully timezone-aware, DST-safe, and works on any chart timeframe. KEY FEATURES SESSION MAPPING For each session (NY / London / Tokyo), the indicator can display: • Open • High • Low • Midpoint (High + Low) / 2 • Close Each level is drawn with its own horizontal line and optional right-side label, so there is never confusion about which line represents which level. SESSION RANGE BOXES Optional shaded boxes highlight the true session range as it develops in real time. These are useful for visualizing: • Compression vs expansion • Relative session volatility • Strength or weakness between sessions Opacity and visibility are fully configurable. RIGHT-SIDE LEVEL LABELS Each session level can be labeled on the right edge of the chart, showing: • Session name (NY / Lon / Tok) • Level type (O / H / L / M / C) • Optional price value Examples: NY H: 18234.25 Lon L: 18098.50 Tok M: 18142.75 This eliminates ambiguity when multiple session levels overlap or share similar colors. SESSION SUMMARY LABELS (AUTO-STACKED) At the top of each session range, an optional summary label displays: • Session name • Open / High / Low / Close • Total range (points) • Range in ticks • ATR multiple Summary labels are automatically stacked vertically using ATR-based or tick-based spacing, preventing overlap even when multiple sessions occur close together. PRIOR SESSION LEVELS The indicator can project prior session levels into the next session, including: • Prior High and Low • Optional prior Open, Close, and Midpoint These levels are commonly used for: • Support and resistance • Liquidity sweeps • Mean reversion • Failed breakouts Projection length is configurable and safely capped to comply with TradingView drawing limits. KILLZONES AND SESSION OVERLAPS Optional background shading highlights key institutional windows: • London Open • New York Open • London / New York overlap These zones help identify high-probability volatility windows and time-based trade filters. All killzones respect the selected session timezone basis. ALERTS Built-in alerts are available for: • Break of prior session high • Break of prior session low • Break of current session high • Break of current session low Alerts can be configured to trigger on wick or close. Alert logic is written using precomputed crossover detection to ensure historical consistency and avoid missed or false alerts. TIMEZONE AND SESSION HANDLING (IMPORTANT) SESSION TIME BASIS OPTIONS The indicator supports three session-time modes: Market Local (DST-aware) – Recommended • New York uses America/New_York • London uses Europe/London • Tokyo uses Asia/Tokyo • Automatically adjusts for daylight saving time UTC (Fixed) • Sessions are interpreted strictly in UTC • Best for crypto or non-DST workflows • Requires manual adjustment during DST changes Custom Timezone • Define a single custom timezone for all sessions This ensures sessions display correctly regardless of the chart’s timezone. DEFAULT SESSION TIMES (Default values assume Market Local (DST-aware) mode) Tokyo: 09:00 – 15:00 London: 08:00 – 16:30 New York: 09:30 – 16:00 These defaults are optimized for cash and index trading. FX traders may adjust session windows as needed. BEST USE CASES This indicator is particularly effective for: • Index futures (ES, NQ, RTY, DAX, FTSE) • Forex session-based strategies • Time-based breakout systems • Liquidity sweep and mean-reversion models • London Open and New York Open trading • Multi-session market context analysis PERFORMANCE AND SAFETY NOTES • All future-drawn objects are capped to comply with TradingView limits • Crossover logic is evaluated every bar to prevent calculation drift • Old session drawings are automatically culled to reduce chart clutter • Works on all intraday and higher timeframes RECOMMENDED SETTINGS For most traders: • Session Time Basis: Market Local (DST-aware) • Show Open / High / Low / Midpoint: ON • Prior Session Levels: ON • Summary Labels: ON • Killzones: ON • Alerts: ON (Close-based) FINAL NOTES This indicator is designed to provide objective session structure without opinionated trade signals. It works best as a context layer combined with your own execution rules, confirmations, and risk management. If you trade time, structure, and liquidity, this script provides the framework.
Pine Script® indicator
by valmont33
InCrypto WatermarkInCrypto Watermark A customizable overlay indicator that displays essential trading information directly on your TradingView charts. This tool helps traders quickly access key market data without cluttering the chart interface. KEY FEATURES: • Symbol Information: Displays current trading pair and active timeframe • Price Display: Optional current price with smart precision formatting • Price Change: Optional price change percentage over 24 bars with color-coded indicators • Date & Time: Multiple format options for date (DD/MM/YYYY, MM/DD/YYYY, YYYY-MM-DD, DD.MM.YYYY) and time (HH:MM, HH:MM:SS) • Custom Text: Customizable title and subtitle text • Full Customization: Adjustable positioning, colors, sizes, alignment, and opacity for all elements • Visibility Controls: Show/hide individual elements independently • Background Options: Customizable background color, opacity, and optional borders SETTINGS: The indicator is organized into logical groups: - Text Content: Title and subtitle customization - Visibility: Individual show/hide controls for each element - Watermark Position: Flexible placement options - Symbol Info Position: Separate positioning controls - Cell Size: Width and height adjustments - Title/Subtitle/Symbol Info Settings: Color, size, alignment, and opacity controls - Background Settings: Background color, opacity, and border options USE CASES: • Chart branding for trading groups or channels • Quick reference for essential trading information • Professional-looking charts for screenshots • Multi-timeframe analysis assistance TECHNICAL DETAILS: • Pine Script v6 • Overlay indicator • Works on all TradingView-supported markets and timeframes • Real-time updates HOW TO USE: 1. Add the indicator to your chart 2. Customize title and subtitle in Text Content settings 3. Adjust positioning for watermark and symbol info sections 4. Enable/disable individual information elements as needed 5. Fine-tune colors, sizes, and opacity to match your chart style The indicator automatically adjusts price precision based on the asset's price level. Price change is calculated over 24 bars of the current timeframe (not 24 hours). DISCLAIMER: This indicator is for informational purposes only. It does not constitute investment advice, financial advice, trading advice, or any other type of advice. Past performance does not guarantee future results. Always conduct your own research and risk management before making trading decisions. Trading involves substantial risk of loss and is not suitable for every investor.
Pine Script® indicator
by alexburdukov86
Clock&Flow: Elements of Cycle Analysis 2nd partClock&Flow – Elements of Cycle Analysis (ECA) | Complete Suite Elements of Cycle Analysis (ECA) is an advanced cyclic analysis suite designed to interpret the market through time, structure, strength, and energy, combining cycles, volatility, and participation into a single operational framework. The suite consists of two complementary modules: 🔹ECA 1 – Cycles, Structure, and Volatility (Overlay: True) ECA 1 is dedicated to the structural and temporal analysis of the market. Cyclic SMAs (Cyclic Ratio) Moving averages are calibrated according to nominal cycles and timeframes to monitor multiple cycles simultaneously (from the lower cycle to the upper cycles). Crossovers between fast and slow SMAs certify the closing or transition of the cycle related to the faster SMA. The specific cycle is identified in the Info Table at the bottom right (for 15m - 1h - 2h - 1D timeframes). You can select the number of cycles to observe and the asset type to apply them to: Index: Standard quotes (e.g., Cash sessions). Future: Extended quotes (24h). 50-200: Classic institutional references for the medium-long term. ATR-based Dynamic Cyclic Channels The channels represent a lower cycle and its upper counterpart; their width is determined by the observed timeframe and calculated based on average volatility (ATR). Volatility is not treated as noise but as a structural component of the cycle, essential for contextualizing excesses, compressions, and expansions. Info Table and Quick Guide Dynamic tables automatically link SMAs, timeframes, and time cycles, providing an immediate reading of the current cyclic context. Time Bands (Weekly / Daily) Temporal visualization helps identify cyclic pivots and rhythm transitions. 🔹 ECA 2 – Market Excesses, Strength, and Energy ECA 2 analyzes how the market moves within the cyclic structure. Excesses and Divergences (Cyclic Stochastic) An oscillator calibrated on the same cyclic ratio as the suite. Crossovers between the lower cycle (blue) and upper cycle (red) signal potential phase changes. In areas of excess, divergences often confirm the closing and restart of a cycle. Directional Movement System (DMS) The ADX measures the strength of the movement, while +DI and -DI indicate direction. A simultaneous crossover of ADX, +DI, and -DI signals imminent acceleration, even before the strength is fully expressed. Market Pulse – Real Market Energy The Market Pulse measures the amount of real energy moving through the market by relating three factors: Price Velocity Normalized Volume Volatility (ATR relative to price) These three factors are combined multiplicatively: if one is missing, the impulse weakens. The zero line represents a state of energy equilibrium; values above or below indicate a real imbalance (bullish or bearish). Note: Market Pulse is not a classic oscillator and should not be interpreted as overbought or oversold; it is used to evaluate the energetic quality of a movement. Operational Convergence The maximum operational effectiveness of the ECA suite is achieved when all modules converge on the same market phase. When cyclic timing, volatility, price structure, trend strength, and movement energy align, the context signals a high-probability operational phase. The system is applicable to any timeframe or asset because it is not bound by dogmatic or subjective interpretations of technical or fundamental analysis; instead, it leverages what is actually happening in the market. Major chart patterns and Volume Profile (technically not includable in this specific suite) provide further confirmation. Under these conditions, the signal does not originate from a single indicator but from the consistency of the entire system: time, volatility, and energy moving in the same direction. Entries should always be accompanied by proper risk management. –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Clock&Flow – Elements of Cycle Analysis (ECA) | Suite Completa Elements of Cycle Analysis (ECA) è una suite avanzata di analisi ciclica progettata per leggere il mercato attraverso tempo, struttura, forza ed energia, combinando cicli, volatilità e partecipazione in un unico framework operativo. La suite è composta da due moduli complementari: 🔹 ECA 1 – Cicli, Struttura e Volatilità (overlay true) ECA 1 è dedicato all’analisi strutturale e temporale del mercato. SMA cicliche (ratio ciclica) Le medie mobili sono calibrate in funzione dei cicli nominali e del timeframe per monitorare più cicli simultaneamente (dal ciclo inferiore fino ai cicli superiori). Gli incroci tra SMA veloci e lente certificano la chiusura o transizione del ciclo correlato alla SMA più veloce. Il ciclo in questione è segnalato nella info table in basso a destra (per i time frame 15’ - 1h - 2h - 1D) Puoi selezionare il numero dei cicli da osservare e su quali asset applicarle (Index = quotazioni standard / Future = quotazioni estese / 50-200 i classici riferimenti istituzionali per il medio-lungo periodo Canali ciclici dinamici basati su ATR I canali rappresentano un ciclo inferiore e il suo superiore, l’ampiezza è data dal time frame osservato e calcolata sulla volatilità media (ATR). La volatilità non è trattata come rumore, ma come componente strutturale del ciclo, utile per contestualizzare eccessi, compressioni ed espansioni. Info Table e Quick Guide Tabelle dinamiche collegano automaticamente SMA, timeframe e cicli temporali, fornendo una lettura immediata del contesto ciclico in corso. Time Bands (Weekly / Daily) La visualizzazione temporale aiuta a individuare pivot ciclici e transizioni di ritmo. –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– 🔹 ECA 2 – Eccessi, Forza ed Energia del Mercato ECA 2 analizza come il mercato si muove all’interno della struttura ciclica. Eccessi e divergenze (Stochastic ciclico) Oscillatore calibrato sulla stessa ratio ciclica della suite. Gli incroci tra ciclo inferiore (blu) e superiore (rosso) segnalano potenziali cambi di fase; in area di eccesso, le divergenze certificano spesso la chiusura e ripartenza del ciclo. Directional Movement System (DMS) L’ADX misura la forza del movimento, mentre +DI e –DI ne indicano la direzione. L’incrocio simultaneo di ADX, +DI e –DI segnala un’accelerazione imminente, anche in assenza di forza già espressa. Market Pulse – Energia reale del mercato Il Market Pulse misura quanta energia reale sta attraversando il mercato mettendo in relazione: velocità del prezzo volume normalizzato volatilità (ATR rapportato al prezzo) I tre fattori sono combinati in modo moltiplicativo: se uno manca, l’impulso si indebolisce. La linea dello zero rappresenta una condizione di equilibrio energetico; valori sopra o sotto indicano uno sbilanciamento reale, rialzista o ribassista. Il Market Pulse non è un oscillatore classico e non va interpretato in termini di ipercomprato o ipervenduto: serve a valutare la qualità energetica del movimento. La massima efficacia operativa della suite ECA si ottiene quando tutti i moduli convergono sulla stessa fase di mercato. Quando tempi ciclici, volatilità, struttura del prezzo, forza del trend ed energia del movimento risultano allineati, il contesto segnala una fase ad alta probabilità operativa. È applicabile su qualunque time frame o asset perché non è vincolato a dogmatiche e soggettive interpretazioni di analisi tecnica - fondamentale ma sfrutta ciò che realmente sta accadendo sul mercato. I principali pattern grafici e il Volume Profile (in questa suite tecnicamente non inseribili) forniscono ulteriori conferme e/o indicazioni. In queste condizioni il segnale non nasce da un singolo indicatore, ma dalla coerenza dell’intero sistema: tempo, volatilità ed energia si muovono nella stessa direzione. Gli ingressi vanno sempre accompagnati da una corretta gestione del rischio.
Pine Script® indicator
by JoMerende
XAU Seasonality + Setup Quality + Month Strength | WarRoomXYZXAU Seasonality Engine is a technical analysis indicator developed for the study of recurring, calendar-based behavior on XAUUSD (Gold). The tool blends month-of-year seasonality statistics with higher-timeframe context and a setup-quality gate to help users observe when market conditions historically lean strong, weak, or neutral — and how strict trade selection should be during each regime. Indicator Concept An indicator for XAUUSD that combines: 1. Seasonality Regime (Month-of-Year Bias) ► Classifies the current month as Strong / Weak / Neutral based on either: • Preset months (user-defined) or • Auto mode (computed from historical monthly performance) ► Strong months suggest a bullish tailwind (not a signal). ► Weak months suggest headwind / caution and require stricter setup quality. 2. Monthly Performance Engine (Under the Hood) ► Uses the symbol’s monthly timeframe data to compute, per calendar month: • Average monthly return (%) • Win rate (%) — how often that month closes positive • Month Strength Score (0–100) — a blended score derived from performance data ► The score is designed to provide a relative strength snapshot of seasonality by month. 3. Month Strength Histogram ► Plots a histogram (0–100) of the current month’s strength score. • Higher bars = historically stronger month tendency • Lower bars = historically weaker month tendency ► Optional horizontal reference lines mark “strong” and “weak” zones to make regimes obvious at a glance. 4. Setup Quality Meter (Confluence Filter) ► The indicator calculates a Setup Quality Score (0–100) using market structure and momentum components, such as: • EMA trend alignment • Momentum confirmation (EMA fast vs slow) • Structure break confirmation (BOS) • Liquidity sweep behavior • Candle confirmation logic ► This score is intended as a trade-selectivity filter , not a trade executor. 5. Adaptive Rules for Weak Months (Strict Mode) ► When the indicator detects a weak seasonal regime, conditions automatically tighten: • The A+ threshold increases (adaptive thresholding) • Optional rule: Weak months require BOS + Sweep + FVG simultaneously before any A+ condition is considered valid This forces the user into “higher-quality-only” behavior during historically weaker seasonal periods. 🔹1 Visual Components Included • Seasonality regime label (Strong / Weak / Neutral) • Optional background shading based on regime • Month Strength Score histogram (0–100) • Current month stats: Avg return + win rate • Setup Quality Meter value (0–100) • Adaptive A+ threshold display • Weak-month confluence gate status (BOS / Sweep / FVG pass/fail) • Optional alerts when strict criteria are met ➣What Means in the XAU Indicator 🔹 Definition (in THIS indicator) Win Rate = the percentage of historical months that closed positive for the same calendar month. It is NOT: trade win rate ❌ signal accuracy ❌ It is a s tatistical seasonality metric . How It’s Calculated For each calendar month (January, February, etc.), the indicator: 1.Looks at historical monthly candles (Monthly timeframe). 2. Counts how many times that month: •Closed higher than it opened (or higher than previous month close). 3. Divides: Number of positive months ÷ Total number of observed months × 100 Example: September If over the last 20 years: September closed green 14 times September closed red 6 times Then: Win Rate = (14 / 20) × 100 = 70% That’s what you see as in the dashboard. What the Win Rate Is Used For 1️⃣ Part of the Month Strength Score The indicator blends: •Average Monthly Return (%) → measures magnitude •Win Rate (%) → measures consistency Combined into: Month Strength Score (0–100) This avoids a common trap: •A month with 1 huge rally but many losses ≠ reliable •A month with steady positive closes = higher quality environment What Win Rate Tells You High Win Rate (e.g. 65–75%) •Gold more often closes higher in this month •Continuation is statistically more likely •Pullbacks are more likely to resolve in trend direction Low Win Rate (e.g. 35–45%) •Gold more often fails to close higher •More chop, deeper retracements, false breakouts •Continuation trades statistically struggle What It Does NOT Tell You 🚫 It does NOT mean: •“You will win 70% of your trades” •“Every setup in this month works” •“Direction is guaranteed” Seasonality is context, not prediction. Why This Is Powerful When Combined With Your System On its own, win rate is just data. But in your indicator, it’s used to: •🔒 Raise the A+ threshold in weak months •🧠 Force BOS + Sweep + FVG confluence •❌ Block marginal setups automatically So instead of guessing: -“Why is gold so choppy this month?” You know: -“This month historically underperforms SO I must be stricter.” ➣What Means in the XAU Seasonality Indicator 🔹 Definition (in THIS indicator) Avg Monthly Return = the average percentage gain or loss of XAUUSD for a specific calendar month, calculated across many years. It measures magnitude , not frequency. It is NOT: •trade profit ❌ •expected return for the next month ❌ •guaranteed performance ❌ It is a historical seasonality tendency. How It’s Calculated For each calendar month (January, February, etc.), the indicator: 1.Takes every historical occurrence of that month. 2.Calculates the percentage change of the monthly candle: (Monthly Close − Previous Monthly Close) ÷ Previous Monthly Close × 100 3. Adds all those percentage changes together. 4. Divides by the total number of observations. Example: September Assume over 20 years: +2.4%, +1.1%, −0.6%, +3.0%, +1.8%, ... If the sum of all September returns = +28% across 20 years: Avg Monthly Return = +1.40% That’s the number displayed in the indicator. What Avg Monthly Return Is Used For 1️⃣ Measuring Strength of Movement •Win Rate → “How often does it close green?” •Avg Monthly Return → “How big are the moves when it works?” Both are needed. A month can: •Win often but move very little •Move a lot but only occasionally The indicator combines both to avoid misleading conclusions. How to Interpret Avg Monthly Return Positive Avg Return (e.g. +0.8% to +2.0%) •Gold tends to expand during this month •Continuation phases are more likely •Pullbacks are often absorbed Near-Zero Avg Return (e.g. −0.2% to +0.2%) •Market is statistically balanced •Expect chop, rotations, false breaks •Continuation is less reliable Negative Avg Return (e.g. −0.5% or worse) •Downward pressure or heavy mean reversion •Rallies often fade •Risk of aggressive stop hunts What Avg Monthly Return Does NOT Mean 🚫 It does NOT mean: •“Price will move +1.4% this month” •“You should buy because the number is positive” •“This is a guaranteed edge” It describes historical behavior, not future certainty. Why Avg Monthly Return Matters More Than People Think Two months can have the same win rate but behave very differently: Example: Month Win Rate Avg Return Reality Month A 65% +0.2% Small, choppy wins Month B 55% +1.6% Fewer wins, but strong expansions Your indicator would rank Month B as stronger, which is correct for continuation-based strategies. How It Feeds the Month Strength Score The indicator blends: •60% Avg Monthly Return (normalized) •40% Win Rate This means: •Big moves matter more than small consistency •But consistency still matters enough to prevent distortion Result: Month Strength Score (0–100) Which is then used to: •tighten or relax A+ thresholds •activate weak-month strict rules •control trade frequency 🔹2. Intended Use The indicator is designed as a discretionary analysis tool to support study of: • seasonal bias and calendar tendencies • relative strength/weakness across months • how strict trade selection should be across different regimes • confluence behavior when seasonal conditions are unfavorable The tool does not generate forecasts, does not guarantee outcomes, and should not be relied upon as a stand-alone decision mechanism. 🔹3.How to Use XAU Seasonality Engine Recommended charts: XAUUSD, intraday (5m–15m) with a HTF context (1H–4H). 1. Identify the Seasonal Regime • Strong month → you can allow more continuation bias (still require structure). • Neutral month → trade normally, standard criteria. • Weak month → tighten selection, demand clean A+ conditions only. 2. Read the Month Strength Histogram • If the score is high (e.g., 70+), the month has historically shown stronger tendency. • If the score is low (e.g., 40 and below), expect slower conditions, deeper pullbacks, or more chop — and reduce marginal trades. 3. Use the Setup Quality Meter as the Gate ► In normal/strong months: • A+ threshold is moderate (e.g., 70) ► In weak months: • A+ threshold is higher (e.g., 80+) • Optional strict mode: must also pass BOS + Sweep + FVG alignment 4. Example Trade Logic (Framework, Not Signals) ► Bullish framework in a Strong Month: • Seasonal regime = Strong (tailwind) • Structure supports bullish continuation (trend alignment) • Sweep occurs into demand / liquidity grab • Setup Quality reaches A+ threshold • Entry: confirmation candle or retrace to key level • SL: beyond sweep low / invalidation • TP: nearest liquidity / prior highs / HTF level ► Weak Month rule-set (Strict Mode): • Seasonal regime = Weak (headwind) • Only consider trades if: ✅ BOS confirms direction ✅ Sweep occurs and rejects cleanly ✅ FVG exists recently (or is mitigated if you choose that model) ✅ Setup Quality exceeds the elevated adaptive threshold If any one is missing → no trade This is not meant to “predict” gold — it’s meant to enforce discipline when seasonality historically underperforms. 🔹4.Limitations and User Responsibility ► The indicator does not represent financial advice or imply performance expectations. ► Seasonality is statistical tendency, not certainty — macro conditions can override it. ► Results vary by broker feed, timeframe, and settings. ► Users should test thoroughly in simulation before applying to live markets. ► All trading decisions, risk management, and execution remain solely the responsibility of the user. 🔹5. Alerts Optional alerts can notify when: • a new month begins and the seasonal regime changes • A+ criteria are met • weak-month strict conditions pass (BOS + Sweep + FVG) Alerts are informational only and do not constitute actionable recommendations. Disclaimer This script is provided for informational and educational purposes only . It does not provide financial, investment, or trading advice, and it does not guarantee profits or future performance. All decisions made based on this script are solely the responsibility of the user. This script does not execute trades, manage risk, or replace the need for trader discretion. Market behavior can change quickly, and past behavior detected by the script does not ensure similar future outcomes. Users should test the script on demo or simulation environments before applying it to live markets and must maintain full responsibility for their own risk management, position sizing, and trade execution. Trading involves risk, and losses can exceed deposits. By using this script, you acknowledge that you understand and accept all associated risks.
Pine Script® indicator
by WarroomXYZ
Clock&Flow: Elements of Cycle Analysis 1st partClock&Flow – Elements of Cycle Analysis (ECA) | Complete Suite Elements of Cycle Analysis (ECA) is an advanced cyclic analysis suite designed to interpret the market through time, structure, strength, and energy, combining cycles, volatility, and participation into a single operational framework. The suite consists of two complementary modules: 🔹 ECA 1 – Cycles, Structure, and Volatility (Overlay: True) ECA 1 is dedicated to the structural and temporal analysis of the market. Cyclic SMAs (Cyclic Ratio) Moving averages are calibrated according to nominal cycles and timeframes to monitor multiple cycles simultaneously (from the lower cycle to the upper cycles). Crossovers between fast and slow SMAs certify the closing or transition of the cycle related to the faster SMA. The specific cycle is identified in the Info Table at the bottom right (for 15m - 1h - 2h - 1D timeframes). You can select the number of cycles to observe and the asset type to apply them to: Index: Standard quotes (e.g., Cash sessions). Future: Extended quotes (24h). 50-200: Classic institutional references for the medium-long term. ATR-based Dynamic Cyclic Channels The channels represent a lower cycle and its upper counterpart; their width is determined by the observed timeframe and calculated based on average volatility (ATR). Volatility is not treated as noise but as a structural component of the cycle, essential for contextualizing excesses, compressions, and expansions. Info Table and Quick Guide Dynamic tables automatically link SMAs, timeframes, and time cycles, providing an immediate reading of the current cyclic context. Time Bands (Weekly / Daily) Temporal visualization helps identify cyclic pivots and rhythm transitions. 🔹 ECA 2 – Market Excesses, Strength, and Energy ECA 2 analyzes how the market moves within the cyclic structure. Excesses and Divergences (Cyclic Stochastic) An oscillator calibrated on the same cyclic ratio as the suite. Crossovers between the lower cycle (blue) and upper cycle (red) signal potential phase changes. In areas of excess, divergences often confirm the closing and restart of a cycle. Directional Movement System (DMS) The ADX measures the strength of the movement, while +DI and -DI indicate direction. A simultaneous crossover of ADX, +DI, and -DI signals imminent acceleration, even before the strength is fully expressed. Market Pulse – Real Market Energy The Market Pulse measures the amount of real energy moving through the market by relating three factors: Price Velocity Normalized Volume Volatility (ATR relative to price) These three factors are combined multiplicatively: if one is missing, the impulse weakens. The zero line represents a state of energy equilibrium; values above or below indicate a real imbalance (bullish or bearish). Note: Market Pulse is not a classic oscillator and should not be interpreted as overbought or oversold; it is used to evaluate the energetic quality of a movement. Operational Convergence The maximum operational effectiveness of the ECA suite is achieved when all modules converge on the same market phase. When cyclic timing, volatility, price structure, trend strength, and movement energy align, the context signals a high-probability operational phase. The system is applicable to any timeframe or asset because it is not bound by dogmatic or subjective interpretations of technical or fundamental analysis; instead, it leverages what is actually happening in the market. Major chart patterns and Volume Profile (technically not includable in this specific suite) provide further confirmation. Under these conditions, the signal does not originate from a single indicator but from the consistency of the entire system: time, volatility, and energy moving in the same direction. Entries should always be accompanied by proper risk management. –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Clock&Flow – Elements of Cycle Analysis (ECA) | Suite Completa Elements of Cycle Analysis (ECA) è una suite avanzata di analisi ciclica progettata per leggere il mercato attraverso tempo, struttura, forza ed energia, combinando cicli, volatilità e partecipazione in un unico framework operativo. La suite è composta da due moduli complementari: 🔹 ECA 1 – Cicli, Struttura e Volatilità (overlay true) ECA 1 è dedicato all’analisi strutturale e temporale del mercato. SMA cicliche (ratio ciclica) Le medie mobili sono calibrate in funzione dei cicli nominali e del timeframe per monitorare più cicli simultaneamente (dal ciclo inferiore fino ai cicli superiori). Gli incroci tra SMA veloci e lente certificano la chiusura o transizione del ciclo correlato alla SMA più veloce. Il ciclo in questione è segnalato nella info table in basso a destra (per i time frame 15’ - 1h - 2h - 1D) Puoi selezionare il numero dei cicli da osservare e su quali asset applicarle (Index = quotazioni standard / Future = quotazioni estese / 50-200 i classici riferimenti istituzionali per il medio-lungo periodo Canali ciclici dinamici basati su ATR I canali rappresentano un ciclo inferiore e il suo superiore, l’ampiezza è data dal time frame osservato e calcolata sulla volatilità media (ATR). La volatilità non è trattata come rumore, ma come componente strutturale del ciclo, utile per contestualizzare eccessi, compressioni ed espansioni. Info Table e Quick Guide Tabelle dinamiche collegano automaticamente SMA, timeframe e cicli temporali, fornendo una lettura immediata del contesto ciclico in corso. Time Bands (Weekly / Daily) La visualizzazione temporale aiuta a individuare pivot ciclici e transizioni di ritmo. –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– 🔹 ECA 2 – Eccessi, Forza ed Energia del Mercato ECA 2 analizza come il mercato si muove all’interno della struttura ciclica. Eccessi e divergenze (Stochastic ciclico) Oscillatore calibrato sulla stessa ratio ciclica della suite. Gli incroci tra ciclo inferiore (blu) e superiore (rosso) segnalano potenziali cambi di fase; in area di eccesso, le divergenze certificano spesso la chiusura e ripartenza del ciclo. Directional Movement System (DMS) L’ADX misura la forza del movimento, mentre +DI e –DI ne indicano la direzione. L’incrocio simultaneo di ADX, +DI e –DI segnala un’accelerazione imminente, anche in assenza di forza già espressa. Market Pulse – Energia reale del mercato Il Market Pulse misura quanta energia reale sta attraversando il mercato mettendo in relazione: velocità del prezzo volume normalizzato volatilità (ATR rapportato al prezzo) I tre fattori sono combinati in modo moltiplicativo: se uno manca, l’impulso si indebolisce. La linea dello zero rappresenta una condizione di equilibrio energetico; valori sopra o sotto indicano uno sbilanciamento reale, rialzista o ribassista. Il Market Pulse non è un oscillatore classico e non va interpretato in termini di ipercomprato o ipervenduto: serve a valutare la qualità energetica del movimento. La massima efficacia operativa della suite ECA si ottiene quando tutti i moduli convergono sulla stessa fase di mercato. Quando tempi ciclici, volatilità, struttura del prezzo, forza del trend ed energia del movimento risultano allineati, il contesto segnala una fase ad alta probabilità operativa. È applicabile su qualunque time frame o asset perché non è vincolato a dogmatiche e soggettive interpretazioni di analisi tecnica - fondamentale ma sfrutta ciò che realmente sta accadendo sul mercato. I principali pattern grafici e il Volume Profile (in questa suite tecnicamente non inseribili) forniscono ulteriori conferme e/o indicazioni. In queste condizioni il segnale non nasce da un singolo indicatore, ma dalla coerenza dell’intero sistema: tempo, volatilità ed energia si muovono nella stessa direzione. Gli ingressi vanno sempre accompagnati da una corretta gestione del rischio.
Pine Script® indicator
by JoMerende
BTC Valuation ZonesBTC Valuation – Distance From 200 MA This indicator provides a simple but powerful Bitcoin valuation framework based on how far price is from the 200-period Moving Average, a level that has historically acted as Bitcoin’s long-term equilibrium. Instead of predicting tops or bottoms, this tool focuses on mean-reversion behavior: When price deviates too far above the 200 MA → risk increases When price deviates deeply below the 200 MA → long-term opportunity increases
Pine Script® indicator
by LeonardoDaTrader
New York Sessions High/Low with Liquidity Purge CriteriaDisplays horizontal lines at the highest high and lowest low of the NY AM (09:30–12:00) and NY PM (13:30–16:00) sessions in New York time. Lines extend forward until price strongly breaks them by a user-defined threshold (N points), at which point they cease extending - liquidity purged. Option to show only active lines (unpurged liquidity) - toggle to hide old liquidity pools for a cleaner chart. Customizable colors, line styles, width, lookback days and purge threshold.
Pine Script® indicator
by LimYX
1
Gann Octave Pro - Angles & Time Cycles 🎯 Gann Octave Pro - Angles & Time Cycles ## Complete Gann Trading System - Price, Angles & Time in One Indicator A professional-grade Gann analysis tool combining **Octave Price Levels**, **Gann Angles (1x1, 2x1, 1x2)**, and **Advanced Time Cycle Projections**. Perfect for traders seeking precision market timing through geometric confluence. --- ## 🌟 Key Features ### 📐 Octave Price Levels - **5 Key Levels**: 0%, 25%, 50%, 75%, 100% - **Color-Coded**: Green (support) → Blue (50% pivot) → Red (resistance) → Black (boundaries) - **Dynamic Updates**: Auto-adjusts to swing structure - **Trading Edge**: 50% level is the most powerful reversal zone ### 📏 Gann Angles - **1x1 Angle** (Black) - Natural 45° trend line - **2x1 Angle** (Red) - Steep acceleration zone - **1x2 Angle** (Red) - Gradual support/resistance - **Customizable Extension**: Fixed bars or % of swing length ### ⏰ Advanced Time Cycles **Three Calculation Methods:** 1. **Angle-Level Confluence** ⭐ (Recommended) - Calculates intersections of Gann angles with octave levels - Most sophisticated timing system - Based on price-time geometry 2. **Swing Duration** - Uses actual swing bar length 3. **Harmonic (Swing/8)** - Classic Gann harmonic division **Cycle Visualization:** - **Full Cycles** (Purple, solid) - Major turning points, labeled "◆ FC1 (176 bars) " - **Sub-Cycles** (Blue, dotted) - Minor pivots, labeled "S1 " - **Mid-Cycles** (Orange, dashed) - Half-cycle inflection points - **Past Display**: Shows 4 complete past cycles for validation - **Future Projection**: Projects 8 future cycles for anticipation --- ## 🎯 How to Use ### Quick Start 1. Apply to chart (works all timeframes/instruments) 2. Select period: Default 44 bars (adjust based on timeframe) 3. Choose cycle method: "Angle-Level Confluence" for best results 4. Observe past cycles to validate timing accuracy ### Trading Strategies **Triple Confluence Setup** (Highest Probability) - Price at octave level (especially 50%) - Price touches Gann angle (1x1 most reliable) - Time cycle arrives (full cycle preferred) - **Entry**: On confluence | **Stop**: Below/above octave level | **Target**: Next level **Cycle Anticipation** - Enter 1-2 bars before cycle line if price at octave level - Exit at next cycle or target octave level - **Edge**: Anticipate cycles instead of reacting **Angle Breakout + Cycle** - Price breaks 1x1 angle + next cycle within 20 bars - Hold through cycle, exit at 2x1 angle or next major level --- ## ⚙️ Customization ### Period Selection (88-Based) 11 harmonic options: 3, 6, 11, 22, **44**, 88, 176, 352, 704, 1408, 2816 bars - **Intraday** (15m-1h): Period 3-4 - **Swing Trading** (4h-Daily): Period 4-5 - **Position Trading** (Daily-Weekly): Period 5-6 ### Visual Controls - **Colors**: Independent for all elements - **Line Widths**: Separate controls (1-5) for levels, angles, cycles - **Label Size**: Tiny/Small/Normal/Large (unified) - **Label Position**: Top/Middle/Bottom - **Show/Hide**: Toggle any component ### Alerts - 50% octave level breakouts - Customizable messages --- ## 💡 Pro Tips 1. **Validate First**: Observe 2-3 past cycles before trading 2. **Adjust to Volatility**: High volatility = lower period (22-44), Low = higher (88-176) 3. **Multiple Timeframes**: Apply on different timeframes for confirmation 4. **Respect 50% Level**: Most powerful reversal zone in Gann theory 5. **Focus on Full Cycles**: Highest probability setups (◆ FC markers) 6. **Combine with Price Action**: Indicator shows WHERE/WHEN, price action shows HOW --- ## 🚀 What Makes It Unique ✅ **Intelligent Confluence Cycles** - Unique angle-level intersection calculation ✅ **Historical Validation** - See past cycles to trust future projections ✅ **Professional Design** - Color-coded hierarchy, clean labels, no clutter ✅ **Complete Automation** - Everything updates in real-time ✅ **Three-Dimensional Analysis** - Price + Angles + Time = complete picture --- ## 📊 Best Markets - Stock indices (S&P 500, NASDAQ, Dow) - Forex majors (EUR/USD, GBP/USD, USD/JPY) - Commodities (Gold, Silver, Oil) - Crypto (BTC, ETH) - Liquid stocks ✅ Complete Gann system (price + angles + time) ✅ 3 time cycle methods ✅ Auto swing detection ✅ 4 past + 8 future cycle projections ✅ Professional visualization ✅ Extensive customization ✅ Real-time alerts ✅ Works all markets/timeframes --- ## ⚠️ Disclaimer This indicator is for educational purposes and applies W.D. Gann methodology principles. Not financial advice. Always use proper risk management, position sizing, and stop losses. Practice on paper before live trading. Past performance doesn't guarantee future results. --- **The market moves in patterns of price and time. This indicator helps you see them.** Trade with geometry. Trade with time. Trade with confidence.
Pine Script® indicator
by TimePriceDecoder
11