DCA + VA (Value Averaging) | UA versionDCA + VA (Value Averaging) | UA version
DCA + VA is a practical portfolio simulator for TradingView that compares two long-term investing approaches on any symbol:
• DCA (Dollar-Cost Averaging) — invest a fixed amount on a fixed schedule.
• VA (Value Averaging) — invest (and optionally sell) to keep the invested part of the portfolio close to a target growth path.
The indicator is plotted in a separate lower pane and is designed for realistic capital efficiency analysis, including the effect of cash sitting idle (“cash drag”).
What you see on the chart
• Two thick yellow lines
— DCA line: portfolio value under classic DCA
— VA line: portfolio value under Value Averaging
• Trade dots
— Small green dots : buys
— Small red dots : sells (VA only, if enabled)
• UA table + right-side labels
— key portfolio metrics for both strategies
Core assumptions
• Trades are executed at bar close ( close )
• Dividends and broker commissions are ignored (for now)
• Optional tax logic is available for VA sells: tax is applied to realized profit using average cost basis
Line mode
• Капітал+Кеш (default): shows total portfolio value = holdings + cash (honest “cash drag”)
• Лише капітал : shows holdings value only (invested part)
DCA logic (classic)
Start from Start date .
On each scheduled period ( Week / Month / Half-year / Year ) the script:
• adds the deposit amount to cash
• buys the asset for that amount (if cash is available)
VA logic (Value Averaging)
VA maintains a target value for the invested holdings (asset value only, cash not included ).
On each VA step:
Regular deposit is added to VA cash
Target is updated by period growth g (derived from annual CAGR and selected frequency)
If holdings value is below target → buy using cash (optionally add extra if enabled)
If holdings value is above target and selling is enabled → sell down to target (cash increases; optional profit tax applies)
Target update formula:
Target = Target × (1 + g) + Regular deposit
Optional controls
• Sell excess ( vaSellExcess ): allow sells when above target
• Add extra on drawdowns ( vaAddExtra ): allow additional contributions when cash isn’t enough
• Max extra per period ( vaMaxExtra ): cap extra contributions ( 0 = unlimited )
• Tax on sells ( vaUseTax / vaTaxRate ): apply tax to realized profit (average cost basis)
Table metrics (UA)
For both DCA and VA:
• Накопичено — total contributed cash
• Інвестовано — current invested cost basis
• Кеш — cash balance
• Капітал — portfolio value (based on selected line mode)
• Прибуток % — ROI in percent
• CAGR стратегії — annualized return based on elapsed time
Best use (recommended settings)
• Best timeframe: 1W
Weekly candles make long-term simulations cleaner and more realistic: less noise, fewer “micro” fluctuations, and more stable periodic triggers for DCA/VA steps.
• Recommended workflow:
Set chart timeframe to 1W
Choose deposit frequency (usually Тиждень or Місяць )
Start with Капітал+Кеш to see true cash drag
Compare DCA vs VA using Прибуток % and CAGR (not only absolute $)
• How to interpret results:
— If VA has higher capital but lower ROI %, it usually means you contributed more (extra funding enabled).
— If VA sells rarely, your target path may be aggressive (high CAGR + large deposits), so holdings don’t exceed the target often.
Notes
• If VA shows higher capital but lower profit % , it usually means more total contributions (extra funding enabled).
• Sells can be rare if the target path grows aggressively (high CAGR + large deposits).
Forecasting
Pro Value Master - All in One: Fundamentals 10Y, CAGR, DCF, Debt
Stop guessing. Start investing like an institution. The Pro Value Master transforms your chart into a professional financial terminal. It provides the crucial data you need to assess Quality, Valuation, and Risk in seconds. You get 3 indicators in one.
🔥 THE KILLER FEATURE: 2-3-5-7-10-YEAR CAGR for all our fundamentals 🔥
TradingView gives you raw data. We give you the truth. This indicator automatically calculates the Compound Annual Growth Rate (CAGR) for 2, 3, 5, 7, and 10 years — a feature you won't find in standard tools.
📊 Table 1: The Quality Matrix (Top Right)
A complete 10-year snapshot (2016–2025) plus our exclusive CAGR analysis.
ROIC %: The king of quality metrics. Shows management efficiency.
Free CF / Share: The real cash profit. The basis for all valuations.
EPS & Revenue: Track the top and bottom line growth instantly.
Gross Margin %: The ultimate indicator for pricing power.
Rule of 40: The quick-check for Tech/SaaS health (Growth + Margin > 40).
Tang. Book Val/Sh: Your hard downside protection.
💰 Table 2: Value & Risk Check (Bottom Right)
Protect your capital with the "Buffett Check".
Market Cap & EV: The true price tag of the business.
Net Debt / EBITDA: Can the company pay its bills?
🟢 < 2x / Negative: Safe / Net Cash Position.
🔴 > 4x / Neg. EBITDA: Danger Zone.
🚀 Table 3: Auto-DCF Calculator (Middle Right)
A dynamic Discounted Cashflow model built right in.
Uncapped Auto-Growth: If input is 0, the script automatically calculates and applies the 5-Year Free Cashflow CAGR without limits.
Fair Value: The calculated intrinsic value per share.
Buy Price: Your entry point including a safety margin (default 30%).
Invest in data, not stories.
⚠️ Disclaimer This script and the data presented are for educational and informational purposes only. It does not constitute financial advice, an investment recommendation, or an offer to buy or sell securities.
Theoretical Nature: All calculations (including DCF Fair Value and CAGR) are theoretical estimates based on historical data and specific mathematical models. They do not guarantee future performance.
No Liability: The author assumes no responsibility for any trading losses or damages incurred as a result of using this tool.
Do Your Own Research: Markets are volatile. Always conduct your own due diligence and consult with a certified financial advisor before making any investment decisions.
Use at your own risk.
PSP Gann Major Low Expansion LevelsPSP Gann Major Low Expansion Levels
Overview
This indicator identifies the major low price within a user-defined lookback period (default: 25 years) and projects Gann-inspired expansion levels upward from that low. These levels represent percentage multiples of the base low, helping traders spot potential resistance/support zones, breakout targets, and harmonic expansion points in trending markets. Ideal for swing and positional trading in stocks, indices, or forex.
Key Features
Dynamic Lookback & Intervals: Automatically adjusts expansion granularity based on lookback years:
≤5 years: 50% multiples (finer for short-term analysis).
≤15 years: 100% multiples.
≤20 years: 500% multiples.
20 years: 1000% multiples (coarser for long-term cycles).
Major Low Detection: Scans historical bars to pinpoint the absolute lowest close within the lookback, with exact date tracking.
Smart Level Drawing: Plots unlimited levels below/equal to current price for full historical context, but limits to exactly 3 levels above CMP to avoid chart clutter (e.g., useful for high-growth stocks like HBL).
Manual Override: Optionally input custom growth percentages (e.g., "100,200,300") for tailored projections.
Visual Aids:
Color-coded horizontal lines (green to teal cycling) with extend-both for future projections.
Labels showing % growth and price value.
Top-Right Table: Displays lookback range, major low price, and low date.
Bottom-Left Rules Box: Highlights active interval and a quick note: Use with PSP Suite for algo-based CE/PE entry signals in options trading.
How to Use
Add to your chart (works on any timeframe, best on daily/weekly).
Adjust "Strict Lookback Years" to focus on relevant cycles (shorter = more sensitive).
Enable "Use Manual Growth % Levels" for custom targets (comma-separated, no % sign).
Watch for price interactions: Confluence with Gann squares, Fib extensions, or volume spikes signals high-probability trades.
Pro Tip: Pair with momentum oscillators (e.g., RSI) to time entries at lower levels or exits near upper projections.
Customization Ideas
For volatile cryptos: Shorten lookback to 1-2 years with manual 25-50% steps.
For blue-chip stocks: Use full 25-year view for generational targets.
Extend via alerts: Set notifications when price crosses a labeled level.
This script draws from W.D. Gann's principles of geometric expansions while optimizing for modern platforms
HTF Bias Detector=== HUD DISPLAY ITEMS ===
1. **HTF (Timeframe Label)**
Shows the selected higher timeframe being monitored (e.g., "4h", "1D", "1W"). This confirms which timeframe data you're viewing above your current chart.
2. **Open, High, Low, Close (OHLC Values)**
Displays the candlestick values from the higher timeframe:
• Open: Entry price when the HTF candle opened
• High: Highest price reached during the HTF period
• Low: Lowest price during the HTF period
• Close: Most recent closing price on the HTF
Use these to identify key HTF price levels and support/resistance zones.
3. **TP (True Price Range)**
Shows the maximum price movement within the HTF candle. Calculated as: max(High - Low, |High - Previous Close|, |Low - Previous Close|)
Higher TP indicates greater volatility; lower TP suggests a consolidation period.
4. **ATR (Average True Range)**
Displays the average volatility over the last 14 HTF periods (customizable).
Use this to gauge typical price movement on the higher timeframe and set realistic profit targets and stop losses.
5. **MACD Value**
Shows the MACD momentum indicator (difference between 12 and 26-period EMAs) on the HTF.
Positive values suggest upward momentum; negative values indicate downward momentum on the higher timeframe.
6. **Signal Line**
The 9-period EMA of MACD on the HTF.
When MACD crosses above the signal line, it indicates bullish momentum confirmation on the higher timeframe.
7. **Histogram**
The difference between MACD and its Signal Line, visualized as bars.
Expanding bars show increasing momentum; shrinking bars show weakening momentum.
8. **Price Deviation**
Displays how far current price deviates from the HTF close in percentage terms.
Helps identify overbought/oversold conditions relative to the higher timeframe context.
---
=== HOW TO USE ===
• Select your chart timeframe (e.g., 5m, 15m, 1h)
• Set the HTF to a higher timeframe (e.g., 4h, 1D) in indicator settings
• Look for confluence: when both timeframes align, trades are stronger
• Use HTF volatility (ATR) to size positions appropriately
• Combine HTF MACD direction with your current chart setup for confirmation
---
=== SETTINGS ===
• HTF Period: Choose the higher timeframe to monitor
• ATR Length: Adjust sensitivity of volatility measurement (default: 14)
• MACD Settings: Customize fast/slow/signal periods for momentum analysis
TP & SL Indicator PRO [TheScalpingAnt]🟦 P & SL Indicator PRO
Precision Execution. Institutional Risk Control. Zero Guesswork.
Product Category: Trade Execution & Risk Architecture
Designed For: Professional-minded retail traders who demand structure, clarity, and disciplined execution
🟦 PURPOSE & ROLE OF THE INDICATOR
P & SL Indicator PRO is a professional execution framework, built to help traders plan, structure, and manage trades correctly — before pressing the Buy or Sell button.
Instead of guessing where to place stops or randomly choosing targets, the indicator automatically builds a visual execution architecture directly on the chart, including Entry, Stop Loss, and multiple Take Profits, supported by clear risk metrics and visual confirmation tools.
This tool is designed for traders who want:
• Professional execution discipline
• Accurate risk visualization
• Consistency in trade planning
• Faster and more confident decision-making
It does not generate trading signals.
It ensures that when you trade — you trade properly.
🟦 EXECUTION PHILOSOPHY
P & SL Indicator PRO is built around institutional execution principles:
• Trading success is not only based on analysis — it is deeply dependent on execution quality
• Risk must be measured before entering, not after
• Stop placement and Take Profits must be structured, not emotional
• Position sizing must reflect account risk tolerance
• Multiple Take Profits promote disciplined management instead of greed or panic
The indicator reinforces execution discipline by:
• Structuring every trade into Entry → Risk → Reward components
• Showing clear Stop Loss allocation
• Visually mapping Reward targets
• Building logical price progression between TP levels
• Presenting clean visual Risk vs Reward zones
You do not “hope”.
You execute — with clarity and intention
🟦 CORE CAPABILITIES
The indicator automatically calculates and displays:
• Entry price architecture
• Stop Loss placement (multiple calculation options)
• Take Profit progression (TP1 / TP2 / TP3)
• Real-time Risk metrics
• Risk-to-Reward measurements
• Position size approximation
• Visualized Risk & Profit zones
• Clean execution labelling on chart
This transforms trade execution from guesswork into a structured, rule-based process.
🟦 FEATURE SET
✔ Entry Line Placement System
✔ Automatic Stop Loss Engine (Percent or ATR Mode)
✔ Three Take Profit Levels with independent control
✔ Real-time RR visualization
✔ Position Size approximation engine
✔ Dedicated Risk Panel
✔ Visual Profit & Risk shaded zones
✔ Clean on-chart labels
✔ Fully customizable behavior & visuals
✔ Works on ALL markets and ALL timeframes
🟦 CUSTOMIZATION & CONTROL
The trader remains fully in control.
Every execution element can be shaped to match personal style, account size, and strategy type.
▶ Entry Mode
• Manual input
• Last close
• Candle open
▶ Risk Engine
• Balance input
• Risk % per trade
• Leverage consideration
▶ Stop Loss Options
• Percentage mode
• ATR mode
▶ Take Profits
• Independent percentage configuration
• Toggle TP2
• Toggle TP3
▶ Risk Panel
• Show / Hide
▶ Background Zones
• Enable / Disable
• Color selection
• Opacity control
This makes the tool suitable for:
Scalpers • Day Traders • Swing Traders • Crypto • Forex • Indices • Equities
🟦 TYPICAL WORKFLOW
A normal user flow looks like this:
1️⃣ Define Entry
2️⃣ Select LONG or SHORT
3️⃣ Choose Stop methodology (Percent or ATR)
4️⃣ Adjust risk settings
5️⃣ Review Stop distance & Position Size
6️⃣ Verify RR ratios
7️⃣ Execute with confidence
Instead of randomly placing levels, you execute structured plans.
🟦 PRACTICAL USE EXAMPLE
BTC LONG Scenario:
• Entry: 89,000
• Stop Loss: 1.2%
• TP1: 1%
• TP2: 2%
• TP3: 3%
• Risk: 1% account
The indicator immediately displays:
• Entry line
• Stop Loss in red
• TP1 / TP2 / TP3 in green
• Position Size estimation
• Risk-Reward ratios
• Profit shading zones
Instantly — you know:
• Is the risk acceptable?
• Is the RR structure logical?
• Does the trade make sense?
If YES → Execute with discipline.
If NO → You just avoided a bad trade.
This is what professional execution looks like.
🟦 SETTINGS SUMMARY
Key adjustable controls include:
• Entry Mode
• Manual Entry Price
• Trade Direction
• Risk Engine toggle
• Account Balance
• Risk %
• Leverage
• Stop Loss mode
• Stop Loss % / ATR / Multiplier
• TP1 / TP2 / TP3 %
• TP visibility toggles
• Risk Panel toggle
• Background enable
• Background colors
• Opacity controls
Every parameter exists to support real trading decisions — not aesthetics.
🟦 CONCLUSION
P & SL Indicator PRO is not “just another indicator”.
It is a trade execution framework.
It helps traders:
• Reduce emotional decisions
• Enforce structure
• Improve discipline
• Improve long-term consistency
• Execute with institutional-style clarity
Professionals plan trades before entering them.
Now retail traders finally have a tool engineered for the same standard.
🟦 DISCLAIMER
This indicator is a risk-management and execution support tool.
It does not provide financial advice or guarantee profitability.
Trading involves risk. Users remain fully responsible for their decisions.
Yearly Projection ExplorerThis indicator helps you understand how the current market period has behaved historically by overlaying the same date window from previous years and projecting it forward from today’s price.
The script works the following way:
Aligns past years to today’s calendar date
Normalizes all paths to the last close at the start
Projects historical performance X bars forward
Displays each year as a separate performance path
Calculates and plots the mean (average) projection for quick reference
🔧 How It Works
Number of Years: choose how many past years to include (e.g. last 10, 20, or 25 years)
Projection Length: choose how many bars (days) ahead to project
Each line shows how the market moved during the same period in a specific year
Labels show the year and total return at the projection end
The mean line highlights the average historical outcome
🧠 Why This Is Useful
Identify seasonal tendencies
Compare current price action to historical analogs
Visualize best / worst historical outcomes
Set realistic expectations for short-term moves
Add context to discretionary or systematic decisions
This tool does not predict the future, but it provides a powerful historical framework to assess what has been typical, rare, or extreme for the current market window.
⚠️ Notes
Script works on timenow variable for now, and you might see unexpected periods if today is a day off.
Results depend on the selected timeframe and instrument
Past performance is not a guarantee of future results
Designed for analysis and context, not standalone signals
XAUUSD 240m Pivot PointsThis Indicator helps you to automatically find pivot point S1 S2 S3 R1 R2 and R3 for each and every candle that occurs in 4 hr tf
NOVA - SessionsKey Features:
Three Major Sessions:
Asia (Tokyo):** Draws the overnight consolidation range (High/Low/Mid).
London:** Draws the breakout session range.
New York:** Draws the reversal/continuation session range (aligned with the Stock Market Open).
Smart Timezone Logic:
All sessions are calculated using their **local** exchange times (e.g., Tokyo time for Asia, NY time for NYSE) but display correctly on your chart in Amsterdam time. You never have to adjust for Daylight Savings.
Support & Resistance:
The Highs, Lows, and Midpoints extend to the right, allowing you to see how previous sessions act as support or resistance later in the day.
Daily Open:
Marks the exact opening price at Midnight to help you determine if price is "premium" (expensive) or "discount" (cheap) for the day.
Midnight VWAP:
A volume-weighted average price that resets every night, acting as a dynamic "fair value" line for the day.
Clean Visuals:
Completely customizable. You can toggle background boxes, lines, and text labels to keep your chart clean.
In short:
It automates the "boring work" of marking up your chart every morning so you can focus purely on price action.
Newton Pulse Pro AI Exclusive – Newton
Next-Generation Trend Intelligence & Smart Range Filtering
Introduction Newton is the newest powerhouse in the AI Exclusive series, specifically engineered to master trend dynamics. While most indicators fail during choppy, sideways markets, Newton uses advanced AI logic to distinguish between a true trending move and a high-risk range. It is designed for traders who value quality over quantity, providing signals only when the market has clear momentum.
Key Benefits
✅ Smart Range Filtering: Automatically detects sideways markets and remains silent to protect you from "choppy" price action.
✅ Pure Trend Following: Focuses exclusively on high-probability Buy and Sell entries within established trends.
✅ Noise Reduction: Eliminates false signals by ignoring minor price fluctuations that do not lead to real moves.
✅ Strategic Patience: Encourages disciplined trading by only appearing when the market conditions are optimal.
✅ Universal Application: Optimized for Forex, Crypto, Stocks, and Commodities.
General Specifications
Product Name: Newton (Powered by AI Exclusive)
Trading Style: Trend Following & Momentum
Signal Type: Non-Repaint (Signals are fixed once the candle closes)
Market Phase Detection: Intelligent Range/Trend differentiation
Visual Design: Clean, minimalist interface focused on entry execution
Individual Product Presentation: Newton (Trend Master)
Overview: An AI-driven indicator that specializes in identifying the "Law of Motion" in the market. It provides Buy/Sell signals only when a trend is confirmed, staying completely inactive during ranging phases to prevent capital erosion.
Benefits:
Avoids "Death by a Thousand Cuts" in sideways markets.
Provides clear, decisive entry points for Buy and Sell orders.
Simplifies the chart by removing unnecessary clutter and noise.
Features:
Proprietary Trend Logic: Analyzes market structure to ensure signals are backed by real volume and momentum.
Zero-Signal Range Mode: The indicator remains quiet when the market lacks a clear direction—one of its most powerful features.
Visual Precision: High-contrast labels and signals for instant decision-making.
Compatibility: Works seamlessly across all timeframes, from 1-minute scalping to weekly swing trading.
⚙️ Installation & Activation Guide
Secure Your License Purchase the Newton indicator or the full AI Exclusive Package through our official website.
Submit Your TradingView Details After purchase, send your TradingView email address to our support team for authorization.
Account Verification Our team will process your request and grant access to the proprietary script.
Activation & Use * Open TradingView.
Navigate to Indicators → Invite-Only Scripts.
Select AI Exclusive: Newton to apply it to your chart.
Pro Tip: When Newton is not showing signals, it is a signal in itself—it's telling you to stay on the sidelines and wait for a high-probability breakout.
Smart stock Uptrend Forecaster by Prawindesigned by Prawin for trying to forecast the trend of stocks.
ATR Tick Targets (Daily + Intraday)ATR Tick Targets (Daily + Intraday)
This indicator calculates ATR-based tick targets and stops using both intraday ATR and daily ATR, then converts the result directly into tick distances relative to the current price.
It’s designed for traders who think in ticks rather than raw price units, especially futures traders (e.g., MGC, ES, NQ, CL, etc.).
🔍 What it does
✔️ Calculates:
Intraday ATR
Daily ATR
A combined ATR value (user-selectable)
✔️ Converts ATR → ticks using the symbol’s minimum tick size
✔️ Plots:
ATR-based long TP / SL
ATR-based short TP / SL
✔️ Displays:
tick distances for TP and SL
ATR values used in calculation
optional label shifted to the right of price
⚙️ ATR combination methods
You can choose how ATR is derived:
Intraday only
Daily only
Average (default)
Max (more conservative stops / larger targets)
This allows you to match your volatility model to your trading style.
🎯 Typical use cases
This tool is useful if you:
set fixed tick SL/TP from ATR
scale target size with volatility
trade futures or tick-based markets
want a volatility-aware RR framework
want targets that expand in trends and contract in chop
It does not generate trade signals. It simply provides objective ATR-based distances that you can plug into your own strategy.
👁️ Visual control
Options include:
show/hide lines
show only current + previous bar
show full historical levels
toggle long/short model independently
offset info label to avoid covering candles
⚠️ Notes
Works on any timeframe
Tick values depend on the symbol’s minimum tick size
Intended for analysis, not guaranteed execution distances
CME Quarterly ShiftsCME Quarterly Shifts - Institutional Quarter Levels
Overview:
The CME Quarterly Shifts indicator tracks price action based on actual CME futures contract rollover dates, not calendar quarters. This indicator plots the Open, High, Low, and Close (OHLC) for each quarter, with quarters defined by the third Friday of March, June, September, and December - the exact dates when CME quarterly futures contracts expire and roll over.
Why CME Contract Dates Matter:
Institutional traders, hedge funds, and large market participants typically structure their positions around futures contract expiration cycles. By tracking quarters based on CME rollover dates rather than calendar months, this indicator aligns with how major institutional players view quarterly timeframes and position their capital.
Key Features:
✓ Automatic CME contract rollover date calculation (3rd Friday of Mar/Jun/Sep/Dec)
✓ Displays Quarter Open, High, Low, and Close levels
✓ Vertical break lines marking the start of each new quarter
✓ Quarter labels (Q1, Q2, Q3, Q4) for easy identification
✓ Adjustable history - show up to 20 previous quarters
✓ Fully customizable colors and line widths
✓ Works on any instrument and timeframe
✓ Toggle individual OHLC levels on/off
How to Use:
Quarter Open: The opening price when the new quarter begins (at CME rollover)
Quarter High: The highest price reached during the current quarter
Quarter Low: The lowest price reached during the current quarter
Quarter Close: The closing price from the previous quarter
These levels often act as key support/resistance zones as institutions reference them for quarterly performance, rebalancing, and position management.
Settings:
Display Options: Toggle quarterly break lines, OHLC levels, and labels
Max Quarters: Control how many historical quarters to display (1-20)
Colors: Customize colors for each level and break lines
Styles: Adjust line widths for OHLC levels and quarterly breaks
Best Practices:
Combine with other Smart Money Concepts (liquidity, order blocks, FVGs)
Watch for price reactions at quarterly Open levels
Monitor quarterly highs/lows as potential targets or stop levels
Use on higher timeframes (4H, Daily, Weekly) for clearer institutional perspective
Pairs well with monthly and yearly levels for multi-timeframe confluence
Perfect For:
ICT (Inner Circle Trader) methodology followers
Smart Money Concepts traders
Swing and position traders
Institutional-focused technical analysis
Traders tracking quarterly performance levels
Works on all markets: Forex, Indices, Commodities, Crypto, Stocks
Tomorrow Bullish Detector (StephC6)Tomorrow Bullish Detector
This indicator is a specialized technical analysis suite designed to pinpoint high-probability bullish entries using a 6-factor confluence model. It features a dynamic dashboard and visual chart overlays to keep your analysis clean and focused.
### Key Features
- Real-Time Scorecard Monitor: The on-screen dashboard serves as a live monitor for the most current candle only. It provides an immediate snapshot of technical health.
- Fixed Metric Logic: The six core metrics within the scorecard are not changeable, ensuring strategy integrity:
Trend Alignment: Fast and Slow EMA relationship.
Baseline Position: Price relative to the 200 SMA.
Momentum (RSI): Strength relative to the 50 midline.
Breakout Status: Detection of recent high breaches.
Volatility (ATR): Filtering active vs. quiet market states.
Relative Volume (RVOL): Tracking institutional volume presence.
- Simplified 2-Tier Grading:
Grade A (83%): High-conviction signal with fully customizable label, text, and background colors.
Grade B (67%): Secondary setups using subtle, neutral tones to reduce chart clutter.
- Full Customization:
Custom Text Colors: Independently set the text color for both A and B labels for maximum readability on any chart theme.
EMA/SMA Toggles: Toggle Fast EMA, Slow EMA, and 200 SMA visibility.
Moveable Dashboard: Reposition the panel to any corner of the screen and adjust text scaling.
### Integrated Alerts
Grade A Setups: Notifies you only when the most high-conviction criteria are met.
Grade B Setups: Optional alerts for secondary opportunities.
### How to Use
To get the most out of this tool, follow these three steps for analysis:
Monitor the Live Scorecard: Look at the dashboard in your chosen corner. It monitors the most current candle in real-time. A "STRONG" signal status only appears when the 6-factor confluence meets your Grade A or B thresholds. If the metrics show "Wait" or "Weak," the setup is not yet mature.
Identify the Entry Grade:
- Grade A (83%): This is your high-conviction setup. When you see the Lime green label (default) and background highlight, it means 5 out of 6 technical factors are aligned.
- Grade B (67%): This is a secondary trend-continuation setup. Use this to identify potential entries when the primary trend is already established but momentum is still healthy.
Clean Your Workspace: If your chart feels cluttered, use the Trend Settings to toggle off the EMA lines. The scorecard will continue to calculate the trend logic in the background even if the lines are hidden, allowing you to maintain a clean "price-action only" view while still receiving signals.
### Disclaimer
For Educational Purposes Only. This indicator is a technical tool designed to assist in market analysis and does not constitute financial advice. Trading involves significant risk.
Tomorrow Bullish Detector [Customizable]This indicator is a comprehensive technical analysis suite designed to identify high-probability bullish setups using a multi-factor scorecard approach. It provides real-time feedback directly on your chart through a dynamic dashboard and visual heatmaps.
Key Features
6-Element Bullish Scorecard: Automatically tracks six critical technical metrics:
Trend Alignment: Evaluates EMA fast/slow cross.
Baseline Position: Checks if price is above the 200 SMA.
Momentum (RSI): Confirms strength is above the 50-level midline.
Breakout Detection: Monitors price action against recent highs.
Volatility Expansion: Analyzes ATR for active market moves.
Relative Volume (RVOL): Identifies institutional interest via volume surges.
Fully Customizable Visuals:
Moveable Dashboard: Position the scorecard panel in any corner of the screen (Top Right, Bottom Left, etc.).
Adjustable Text Size: Choose between Small, Normal, or Large text to fit your screen resolution.
Visual Heatmap: The chart background shifts color based on the live probability score.
Transparency Controls: Independently adjust the opacity of the gradient and on-chart labels.
How to Use
Overlay on Main Chart: This indicator is designed as an overlay to keep your price action front and center.
Monitor the Grade: Look for high-grade labels (A/A+) which indicate that the highest technical criteria are being met.
Refine with Inputs: Use the settings menu to adjust EMA lengths, RSI periods, and volume multipliers to match your specific trading style.
### Disclaimer
For Educational Purposes Only. This indicator is a technical tool designed to assist in market analysis and does not constitute financial advice, investment recommendations, or an offer to buy or sell any security. Trading involves significant risk, and past performance is not indicative of future results. Always perform your own due diligence and consult with a licensed financial advisor before making any investment decisions. The author is not responsible for any financial losses incurred through the use of this script.
Futures Psychological Levels PROFutures Psychological Levels PRO – Professional Usage Guide
Indicator Overview
This elite psychological levels tool dynamically plots the most institutionally relevant round-number clusters across futures markets (ES, NQ, YM, CL, GC, SI, BTC, and custom instruments). It separates levels into three hierarchical tiers — Major, Tradable, and Sniper — while intelligently filtering distant levels using an ATR-based proximity engine. The result is a clean, adaptive overlay that scales perfectly from scalping precision on 1-minute charts to big-picture context on daily/weekly timeframes.
Core Philosophy
Psychological levels are where order flow clusters: stops, limits, and institutional positioning accumulate around round numbers. This indicator turns static round numbers into a dynamic decision framework by:
Prioritizing confluence zones
Reducing clutter in ranging or low-volatility environments
Highlighting only price-relevant levels in real time
Key Features
Instrument Presets – One-click optimized spacing for major futures contracts
Three-Tier Hierarchy – Major (institutional anchors), Tradable (active defense zones), Sniper (precise entry/exit triggers)
ATR Proximity Filter – Automatically hides irrelevant distant levels
Zones or Lines – Visual magnet areas or clean horizontal lines
Price Labels & Summary Table – Instant reference for next major levels above/below
Full Customization – Colors, thickness, styles, and manual overrides
How to Best Use This Indicator (Professional Workflow)
Select the Correct Instrument Preset
Start with the built-in preset matching your chart (e.g., "ES (S&P 500)" for /ES or MES). This instantly applies battle-tested increments. Use "Custom" only for non-standard assets (forex pairs, micros with different tick values, or crypto alts).
Match Settings to Your Trading Style & Timeframe
Reading the Levels – Decision Framework
Major Levels (thick red by default): Highest probability reaction zones. Expect strong reversals, breakouts with volume, or liquidity sweeps. Treat as primary support/resistance.
Tradable Levels (orange): Active trader defense zones. Excellent for limit order placement, partial profit taking, or fading weak moves.
Sniper Levels (thin gray): Precision entries/exits, stop runs, and scalping targets. Confluence with order blocks or volume profile nodes dramatically increases edge.
Trade Setup Examples
Rejection Play: Price approaches a Major level from below → long wick rejection + close back inside → enter in direction of rejection with stop beyond wick extremity.
Break & Retest: Clean breakout through Tradable/Major → retest as new support/resistance → enter on confirmation candle.
Liquidity Sweep: Price briefly breaches Sniper/Major (stop hunt) → rapid reclaim → aggressive counter-trend entry.
Confluence Boost: When a level aligns with daily/weekly open, VWAP, or prior high/low volume node → dramatically increase position size or conviction.
Risk Management Integration
Always place stops just beyond the next logical level (typically a Sniper or Tradable beyond your entry zone). Use the summary table to quickly identify invalidation points. Target the next level in the direction of your bias for minimum 1:2 risk-reward (often 1:3–1:5 achievable at Major levels).
Pro Optimization Tips
High-volatility sessions (NY open, FOMC, NFP): Increase ATR Multiplier slightly to avoid excessive clutter.
Low-volatility Asian/range sessions: Decrease ATR Multiplier for tighter precision.
Combine with Volume Profile (Fixed Range or Session) to confirm high-volume nodes at psych levels.
Pair with anchored/session VWAP for additional confluence layers.
On higher timeframes, disable Sniper levels and zones entirely for minimalist structural analysis.
Important Disclaimer
This indicator is a professional decision-support tool, not a standalone trading system. All trading involves substantial risk of loss. Past performance is not indicative of future results. Always conduct your own analysis, manage risk appropriately, and consider your financial situation before placing trades.
Mastering psychological levels is one of the highest-edge concepts in institutional trading. Used correctly, this indicator gives you the same reference framework that prop desks and market makers watch every day. Trade smart, stay disciplined, and let price action at these levels guide your executions.
Arzouni signals EngineArzouni signals Engine generates BUY/SELL signals and automatically prints ENTRY, TP1/TP2/TP3 and SL levels. Alerts are sent via alert() with ready-to-use multi-line Telegram messages. To receive alerts: create an alert and choose “Any alert() function call”.
BTC - StableFlow: Pit-Stop & Refuel EngineBTC – StableFlow: Pit-Stop & Refuel Engine | RM
Strategic Context: The Institutional Gas Station In the high-speed race of the crypto markets, Stablecoins (USDT, USDC, DAI) represent the Fuel, and Bitcoin is the Race Car. Most traders only look at the car's speed (Price), but they ignore the gas tank. The StableFlow Engine is a telemetry dashboard designed to monitor the "Fuel Pressure" within the ecosystem, identifying exactly when the car is being refueled and when it is running on empty.
The Telemetry Logic: How to Read the Race
The indicator operates on a Relative Velocity model. We aren't just looking at how many Stablecoins exist; we are measuring the Acceleration of Stablecoin Market Cap relative to the Acceleration of BTC Price.
1. The Fuel Reservoir (The Histogram)
• Cyan Zones (Refuel): The gas station is open. Institutional "Dry Powder" is flowing into stables faster than it is being spent on BTC. The tank is filling up.
• Orange Zones (Exhaust): The "Overdrive." The car is driving faster than the gas can be pumped. Price is outperforming the stablecoin supply—this is unsustainable and usually precedes a stall.
2. Lap Transitions (The Grey Lines)
These vertical markers signify a Regime Shift . They trigger the moment the momentum crosses the zero-axis, visually distinguishing the transition between a "Net-Refueling" period and a "Net-Exhaustion" period. While not used as direct entry signals, they define the Macro Lap we are currently in.
Operational Playbook: The Pit-Stop Signals
We don't just buy because the tank is full; we buy when the car exits the pits and begins to accelerate. This is captured by our proprietary Pit-Stop Pips.
• Blue Pip (Pit-Stop Buy): Triggered when the Refuel momentum has peaked and is now rotating back into the market. The refuel is complete; the car is rejoining the race with a full tank.
• Red Pip (Exhaust Sell): Triggered when the price acceleration has overextended relative to its fuel source and begins to "roll over." The tank is near empty; time for a tactical pull-back.
Settings & Calibration: The Pit Wall Dashboard
Signal Mode & Logic The engine features a dual-mode signaling system to adapt to different market conditions (or your personal preferred logic):
• Consecutive Mode: Best for high-velocity trends. Fires a pip after n bars of momentum reversal (Default: 2 bars).
• Percentage (%) Mode: Best for structural fades. Fires a pip when the momentum retraces by a specific percentage (e.g., 15%) from its local peak, regardless of the bar count.
Recommended Calibration
While the engine is versatile across various timeframes, the Weekly (1W) chart is the preferred setting for identifying high-conviction macro signals. Lower timeframes provide tactical speed, but the 1W frame offers significantly cleaner signals by filtering out the daily market noise.
Weekly (1W) — The Macro Signal (Preferred): * Velocity Lookback: 20 | Smoothing: 5.
Peak Lookback: 25 (Represents roughly half a year of telemetry data). This is a good starting point for identifying major cycle rotations.
Daily (1D) — The Tactical Pulse: * Velocity Lookback: 20 | Smoothing: 5.
Peak Lookback: 25 (Represents one trading month of telemetry). Useful for active swing traders looking for entry/exit timing within an established macro trend.
Technical Documentation
Data Sourcing & Aggregation The script utilizes request.security to aggregate a "Big Three" Stablecoin Market Cap (USDT + USDC + DAI). This prevents "False Exhaustion" signals caused by capital simply migrating between different stablecoin assets.
Mathematical Foundation The core engine calculates the Rate of Change (ROC) for the Aggregate Stablecoin Supply and BTC Price over a synchronized lookback window.
Formula Logic: Fuel Pressure = EMA ( ROC(Stables) - ROC(BTC) )
The Pit-Stop Pips utilize a local peak-finding algorithm via ta.highest and ta.lowest within a rolling 25-bar window to calculate the Relative Retracement Magnitude . This ensures signals are mathematically tied to the volatility of the current market regime.
The Dual-Fuel Framework: StableFlow x Liquisync
The StableFlow Engine is designed to function as the tactical counterpart to the Liquisync: Macro Pulse Engine . While Liquisync monitors the Global Supply Line (the "Tanker Truck" of M2 Liquidity moving from Central Banks toward the track with a 60-day lead), StableFlow measures the Immediate Fuel Pressure (the "Dry Powder" already in the pit lane, ready to be pumped into the car).
By using both indicators in tandem, you can follow the Dual-Fuel Strategy: Liquisync identifies the fundamental macro regime, while StableFlow identifies the specific "Refuel" and "Exhaustion" pivots within that regime. We will be providing a comprehensive breakdown of this synchronized telemetry in our upcoming Substack Masterclass: The Dual-Fuel Architecture.
Risk Disclaimer & Credits
The StableFlow is a thematic macro tool tracking on-chain liquidity proxies. Stablecoin data is subject to exchange reporting delays. This is not financial advice; it is a telemetry model for institutional education. Rob Maths is not liable for losses incurred via use of this model.
Tags:
indicator, bitcoin, btc, stablecoins, usdt, flow, liquidity, macro, refuel, institutional, robmaths, Rob Maths
Hookes Kinetics | IkkeOmarHooke's Kinetics: A Physics-Based Volatility System
This indicator applies the principles of Hooke's Law to financial time series data to model market volatility as a system of potential and kinetic energy.
Theoretical Foundation: Hooke's Law In physics, Hooke's Law states that the force (F) needed to extend or compress a spring by some distance (x) scales linearly with respect to that distance: F = -kx, where k is the spring constant.
Potential Energy (PE): PE = 0.5 * k * x^2 Kinetic Energy (KE): Energy possessed due to motion.
In this system, we treat Price Action as a spring. Compression (Potential Energy): When price consolidates, volatility compresses. The "spring" is being wound up. Energy is accumulated, not released. Release (Kinetic Energy): When price breaks out of compression, potential energy transforms into kinetic energy. The spring snaps back, driving price motion.
Indicator Mechanics The Hooke's Kinetics oscillator visualizes this energy transfer cycle to identify trend origins and exhaustion points.
Accumulating Energy (Potential): The Blue Area represents the buildup of Potential Energy. This occurs during periods of low volatility (consolidation). The algorithm detects when price variance drops below a threshold (representing spring compression) and aggregates this "stored force" over time. As long as the price remains compressed, the Blue potential energy grows.
Energy Conversion (Kinetic Release): The Red Histogram represents Kinetic Energy. When volatility expands significantly (a breakout), the system triggers a release event. The accumulated Blue potential energy is discharged and converted into the Red kinetic spike. This marks the moment the "spring" is released.
Trend Direction & Decay: Once the Kinetic Energy (Red spike) appears, the "explosive" phase is active. As the Red histogram decays (lowers back to zero), the market enters a coasting phase. The trend direction is established by the price movement during the initial Kinetic release. Traders observe the price vector as the Red energy dissipates to confirm the prevailing trend.
Reversion Signals (Bonus): Extreme peaks in Kinetic Energy (exceptionally high Red spikes) indicate a maximum extension of the spring. Just as a physical spring oscillates, extreme kinetic release often precedes a mean reversion. If price action opposes the direction of the Kinetic decay, it signals a likely reversal.
Visual Reference Referencing the chart above: Blue Ramp: Note the linear buildup of the blue area during sideways price action. This is the "loading" phase. Red Spike: Note the immediate drop in Blue and spike in Red coinciding with the green highlight circles on the chart. These are the breakout points. Green Circles: These highlight the specific candles where Potential converted to Kinetic, marking the optimal entry or decision points.
Code Description
The system defines market state using a composite variable "k" (Stiffness), which combines Price Volatility (NATR) and Relative Volume (RVOL).
k_price = range_natr != 0 ? 1.0 - ((natr - lowest_natr) / range_natr) : 0 k = (k_price * price_weight) + (k_vol * vol_weight) Here, we normalize volatility relative to a historical lookback. High values of "k" indicate high compression—this is the "winding" of the spring.
if is_compressed potential_energy := potential_energy + k kinetic_energy := kinetic_energy * DECAY_RATE When the market is tighter than the user-defined "stiff_thresh", the system accumulates Potential Energy. Note that Kinetic Energy actively decays during this phase, simulating friction or inertia slowing down price movement.
else drain_factor = (1.0 - k) transfer = potential_energy * drain_factor potential_energy := potential_energy - transfer kinetic_energy := (kinetic_energy * DECAY_RATE) + (transfer * ENERGY_MULT) This acts as the conservation of energy. We do not reset Potential to zero instantly; we drain it. The "drain_factor" ensures that a violent expansion (low k) drains potential energy faster than a mild move. This transferred energy is scaled up and added to the Kinetic state.
Note - AMPLITUDE MATTERS!
Observe the amplitude of the Kinetic Energy - higher peaks are more significant. Lower values are usually artifacts, but they can indicate mean reversion on a smaller scale while price remains within a range.
Smart Money Zones (FVG + OB) + MTF Trend Panel## Overview
Professional-grade institutional trading zones indicator that identifies **Fair Value Gaps (FVG)** and **Order Blocks (OB)** - key price inefficiencies where smart money operates. Includes a comprehensive **Multi-Timeframe Trend Panel** for complete market context at a glance.
## Core Features
### 🎯 Fair Value Gaps (FVG)
Fair Value Gaps occur when price moves so aggressively that it leaves an "imbalance" or "gap" in the market structure. These zones often act as magnets where price returns to find liquidity.
**Detection Logic:**
- **Bullish FVG**: When current candle's low is above the high of the candle 2 bars ago
- **Bearish FVG**: When current candle's high is below the low of the candle 2 bars ago
- Requires strong impulse candle (configurable body percentage threshold)
- Color-coded zones: Green for bullish, Red for bearish
### 📦 Order Blocks (OB)
Order Blocks represent the last opposite candle before a significant price move - the zone where institutional orders were placed before the breakout.
**Detection Logic:**
- Identifies the last bearish candle before a strong bullish breakout (Bullish OB)
- Identifies the last bullish candle before a strong bearish breakout (Bearish OB)
- Validates breakout strength using ATR multiplier (1.2x default)
- Color-coded zones: Blue for bullish, Orange for bearish
### 📊 Multi-Timeframe Trend Panel
Real-time trend analysis across **7 timeframes** displayed in an elegant dashboard:
- **1 Minute** - Ultra short-term scalping
- **5 Minutes** - Short-term momentum
- **15 Minutes** - Intraday swings
- **30 Minutes** - Session trends
- **1 Hour** - Multi-session trends
- **4 Hours** - Daily structure
- **Daily** - Long-term direction
**Visual Indicators:**
- 🟢 Green circle = Bullish trend
- 🔴 Red circle = Bearish trend
- Clean, professional table design with customizable position and size
## Intelligence Features
### 🧠 Zone Strength Rating
Every zone is automatically classified by strength based on size relative to ATR:
- **VERY STRONG** - 2.0x ATR or more (major institutional zones)
- **STRONG** - 1.5x to 2.0x ATR (significant zones)
- **MEDIUM** - 1.0x to 1.5x ATR (moderate zones)
- **WEAK** - Below 1.0x ATR (minor zones)
Strength rating helps you prioritize which zones to trade from!
### 📉 Smart Mitigation Tracking
Zones automatically track how much they've been "filled" or mitigated:
- Calculates penetration percentage as price enters the zone
- Zones turn **gray** when 50%+ mitigated or fully filled
- Option to **auto-delete** mitigated zones to keep chart clean
- Live zones extend dynamically with price action
### 🎨 Trend Filter (Optional)
When enabled, only shows zones aligned with the current trend:
- Uses customizable MA period (default 50)
- Bullish zones only appear in uptrend
- Bearish zones only appear in downtrend
- Reduces noise and false signals significantly
## Customization Options
### Display Settings
- Toggle FVGs and OBs independently
- Adjust max zones per type (5-200)
- Choose to remove or gray out mitigated zones
- Color customization for all zone types
### Detection Parameters
- **Min Impulse Body %**: Controls how strong the impulse candle must be (0.3-1.0)
- **Order Block Lookback**: How many bars to look back for OB validation (5-50)
- **ATR Length**: Period for ATR calculation (5-50)
### Trend Filter
- Enable/disable trend filtering
- Adjustable MA period for trend determination
### MTF Panel
- Show/hide the trend panel
- 4 position options: Top Right, Top Left, Bottom Right, Bottom Left
- 3 size options: Small, Normal, Large
- Customizable MA period for trend calculation across all timeframes
## Trading Applications
### 1. **Liquidity Grab Entries**
Wait for price to sweep a zone (50%+ mitigation) then enter on reversal. Smart money often "hunts" these zones before the real move begins.
### 2. **Confluence Trading**
Look for zones that align with:
- Multiple timeframe trends showing same direction
- Multiple FVGs/OBs stacking in same area
- Key support/resistance levels
### 3. **Breakout Confirmation**
Use Order Blocks to confirm the strength of breakouts. Strong OBs indicate institutional participation.
### 4. **Retracement Entries**
Enter when price returns to a fresh, unmitigated zone in the direction of the higher timeframe trend.
### 5. **Range Trading**
Identify FVG zones at range extremes - price often reverses at these inefficiencies.
## How It Works
**Fair Value Gaps** form when the middle candle creates such aggressive movement that it leaves a price gap between the high/low of surrounding candles. Institutional traders know these gaps get filled.
**Order Blocks** mark the origin of major moves. The last opposite-colored candle before a breakout is where large orders were placed. Price often returns to these zones for "retests" before continuing.
**Mitigation** happens when price returns to fill these zones. The indicator tracks this automatically, showing you which zones are still "fresh" and which have been used up.
## Best Practices
✅ **Use higher timeframe trends** - Always check the MTF panel before taking trades
✅ **Trade fresh zones** - Unmitigated zones (not gray) have the highest probability
✅ **Combine with price action** - Look for rejection wicks and engulfing candles at zones
✅ **Respect zone strength** - VERY STRONG and STRONG zones are most reliable
✅ **Use trend filter** - Especially on lower timeframes to reduce false signals
❌ **Don't overtrade** - Not every zone will react, wait for confirmation
❌ **Don't ignore context** - Check the MTF panel for conflicting trends
❌ **Don't chase** - Wait for price to come to the zone, don't enter mid-zone
## Technical Details
- **Non-repainting**: All zones are drawn on confirmed candles only
- **Performance optimized**: Uses efficient array management with per-type caps
- **Real-time updates**: Zones extend and track mitigation as price moves
- **Universal compatibility**: Works on all markets and timeframes
## Recommended Settings by Style
**Scalping (1m-5m charts):**
- Max zones: 10-15
- Use trend filter: ON
- MTF Panel: Focus on 1m-15m trends
- Remove mitigated: ON (keep chart clean)
**Day Trading (5m-1H charts):**
- Max zones: 15-20
- Use trend filter: ON
- MTF Panel: Focus on 15m-4H trends
- Remove mitigated: OFF (track zone history)
**Swing Trading (1H-D charts):**
- Max zones: 20+
- Use trend filter: Optional
- MTF Panel: Focus on 1H-1D trends
- Remove mitigated: OFF (important zones persist)
---
## Perfect For
- Smart Money Concept (SMC) traders
- ICT methodology followers
- Institutional order flow traders
- Price action traders seeking key zones
- Multi-timeframe analysis enthusiasts
**Compatible with all markets:** Forex, Crypto, Stocks, Indices, Commodities, Futures
*Trade where the institutions trade. Follow the smart money.*
Smart Money Zones (FVG + OB) + MTF Trend Panel## Overview
Professional-grade institutional trading zones indicator that identifies **Fair Value Gaps (FVG)** and **Order Blocks (OB)** - key price inefficiencies where smart money operates. Includes a comprehensive **Multi-Timeframe Trend Panel** for complete market context at a glance.
## Core Features
### 🎯 Fair Value Gaps (FVG)
Fair Value Gaps occur when price moves so aggressively that it leaves an "imbalance" or "gap" in the market structure. These zones often act as magnets where price returns to find liquidity.
**Detection Logic:**
- **Bullish FVG**: When current candle's low is above the high of the candle 2 bars ago
- **Bearish FVG**: When current candle's high is below the low of the candle 2 bars ago
- Requires strong impulse candle (configurable body percentage threshold)
- Color-coded zones: Green for bullish, Red for bearish
### 📦 Order Blocks (OB)
Order Blocks represent the last opposite candle before a significant price move - the zone where institutional orders were placed before the breakout.
**Detection Logic:**
- Identifies the last bearish candle before a strong bullish breakout (Bullish OB)
- Identifies the last bullish candle before a strong bearish breakout (Bearish OB)
- Validates breakout strength using ATR multiplier (1.2x default)
- Color-coded zones: Blue for bullish, Orange for bearish
### 📊 Multi-Timeframe Trend Panel
Real-time trend analysis across **7 timeframes** displayed in an elegant dashboard:
- **1 Minute** - Ultra short-term scalping
- **5 Minutes** - Short-term momentum
- **15 Minutes** - Intraday swings
- **30 Minutes** - Session trends
- **1 Hour** - Multi-session trends
- **4 Hours** - Daily structure
- **Daily** - Long-term direction
**Visual Indicators:**
- 🟢 Green circle = Bullish trend
- 🔴 Red circle = Bearish trend
- Clean, professional table design with customizable position and size
## Intelligence Features
### 🧠 Zone Strength Rating
Every zone is automatically classified by strength based on size relative to ATR:
- **VERY STRONG** - 2.0x ATR or more (major institutional zones)
- **STRONG** - 1.5x to 2.0x ATR (significant zones)
- **MEDIUM** - 1.0x to 1.5x ATR (moderate zones)
- **WEAK** - Below 1.0x ATR (minor zones)
Strength rating helps you prioritize which zones to trade from!
### 📉 Smart Mitigation Tracking
Zones automatically track how much they've been "filled" or mitigated:
- Calculates penetration percentage as price enters the zone
- Zones turn **gray** when 50%+ mitigated or fully filled
- Option to **auto-delete** mitigated zones to keep chart clean
- Live zones extend dynamically with price action
### 🎨 Trend Filter (Optional)
When enabled, only shows zones aligned with the current trend:
- Uses customizable MA period (default 50)
- Bullish zones only appear in uptrend
- Bearish zones only appear in downtrend
- Reduces noise and false signals significantly
## Customization Options
### Display Settings
- Toggle FVGs and OBs independently
- Adjust max zones per type (5-200)
- Choose to remove or gray out mitigated zones
- Color customization for all zone types
### Detection Parameters
- **Min Impulse Body %**: Controls how strong the impulse candle must be (0.3-1.0)
- **Order Block Lookback**: How many bars to look back for OB validation (5-50)
- **ATR Length**: Period for ATR calculation (5-50)
### Trend Filter
- Enable/disable trend filtering
- Adjustable MA period for trend determination
### MTF Panel
- Show/hide the trend panel
- 4 position options: Top Right, Top Left, Bottom Right, Bottom Left
- 3 size options: Small, Normal, Large
- Customizable MA period for trend calculation across all timeframes
## Trading Applications
### 1. **Liquidity Grab Entries**
Wait for price to sweep a zone (50%+ mitigation) then enter on reversal. Smart money often "hunts" these zones before the real move begins.
### 2. **Confluence Trading**
Look for zones that align with:
- Multiple timeframe trends showing same direction
- Multiple FVGs/OBs stacking in same area
- Key support/resistance levels
### 3. **Breakout Confirmation**
Use Order Blocks to confirm the strength of breakouts. Strong OBs indicate institutional participation.
### 4. **Retracement Entries**
Enter when price returns to a fresh, unmitigated zone in the direction of the higher timeframe trend.
### 5. **Range Trading**
Identify FVG zones at range extremes - price often reverses at these inefficiencies.
## How It Works
**Fair Value Gaps** form when the middle candle creates such aggressive movement that it leaves a price gap between the high/low of surrounding candles. Institutional traders know these gaps get filled.
**Order Blocks** mark the origin of major moves. The last opposite-colored candle before a breakout is where large orders were placed. Price often returns to these zones for "retests" before continuing.
**Mitigation** happens when price returns to fill these zones. The indicator tracks this automatically, showing you which zones are still "fresh" and which have been used up.
## Best Practices
✅ **Use higher timeframe trends** - Always check the MTF panel before taking trades
✅ **Trade fresh zones** - Unmitigated zones (not gray) have the highest probability
✅ **Combine with price action** - Look for rejection wicks and engulfing candles at zones
✅ **Respect zone strength** - VERY STRONG and STRONG zones are most reliable
✅ **Use trend filter** - Especially on lower timeframes to reduce false signals
❌ **Don't overtrade** - Not every zone will react, wait for confirmation
❌ **Don't ignore context** - Check the MTF panel for conflicting trends
❌ **Don't chase** - Wait for price to come to the zone, don't enter mid-zone
## Technical Details
- **Non-repainting**: All zones are drawn on confirmed candles only
- **Performance optimized**: Uses efficient array management with per-type caps
- **Real-time updates**: Zones extend and track mitigation as price moves
- **Universal compatibility**: Works on all markets and timeframes
## Recommended Settings by Style
**Scalping (1m-5m charts):**
- Max zones: 10-15
- Use trend filter: ON
- MTF Panel: Focus on 1m-15m trends
- Remove mitigated: ON (keep chart clean)
**Day Trading (5m-1H charts):**
- Max zones: 15-20
- Use trend filter: ON
- MTF Panel: Focus on 15m-4H trends
- Remove mitigated: OFF (track zone history)
**Swing Trading (1H-D charts):**
- Max zones: 20+
- Use trend filter: Optional
- MTF Panel: Focus on 1H-1D trends
- Remove mitigated: OFF (important zones persist)
---
## Perfect For
- Smart Money Concept (SMC) traders
- ICT methodology followers
- Institutional order flow traders
- Price action traders seeking key zones
- Multi-timeframe analysis enthusiasts
**Compatible with all markets:** Forex, Crypto, Stocks, Indices, Commodities, Futures
*Trade where the institutions trade. Follow the smart money.*
Batik UltimateBatik Ultimate
Subscription: USD250 / month
Access: Private / Invite Only
What This Indicator Does
Batik Zone is a professional market zoning & performance-tracking tool designed for traders who want clarity, discipline, and accountability — not noise.
It automatically highlights key price reaction zones and tracks how price behaves around those zones across any timeframe or market.
Key Features
1. Automatic Zone Marking
✓ Zones are plotted directly on the chart and move with price
✓ Clean, distraction-free visuals
✓ Designed to align with institutional price behavior
✓ No repainting
2. Risk & Reward Visualization (Optional)
✓ Profit-side zone (blue)
✓ Risk-side zone (red)
✓ Visual guidance only — no forced entries
✓ Fully adjustable distance rules
✗ No buy/sell buttons
✗ No signal arrows
✗ No execution logic
3. History Control
✓ Display only the most recent zones
✓ Prevents chart clutter
✓ Ideal for multi-timeframe analysis
4. Date-Range Performance Statistics
✓ Built-in stats panel (top right)
✓ Tracks zone performance based on selected date range
Available ranges:
Previous Week
Previous Month
Custom Date (YYYYMMDD → YYYYMMDD)
Stats include:
✓ Total zones formed
✓ Wins vs losses
✓ Win rate (%)
✓ Rules used for evaluation
All statistics follow Malaysia trading day timing (MYT 7AM) for accurate session alignment.
5. Fully Adjustable Settings
✓ Zone extension length
✓ Zone visibility & opacity
✓ Win / loss distance thresholds
✓ Date-range selection
✓ Visual components on/off
Who This Is For
✓ Traders who rely on price reaction zones
✓ Traders who want data-backed confidence
✓ Scalpers, intraday, and swing traders
✓ Traders who want clean charts without indicator noise
What This Is NOT
✗ Not a signal service
✗ Not a guaranteed profit tool
✗ Not an automated trading system
This is a decision-support & performance-tracking indicator.
Subscription
💼 USD250 / month
🔒 Private / Invite-Only Access
📲 WhatsApp: +6017-999-9109
LiquiHunterShort Description:
All-in-one SMC indicator: Liquidity Sweeps, CISD, Fair Value Gaps, Trading Sessions, Multi-Timeframe Bias, HTF Candles &
Liquidity Levels.
Full Description:
LiquiHunter is a comprehensive Smart Money Concepts (SMC) indicator that combines multiple institutional trading tools
into one powerful package.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔍 CORE FEATURES
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
📊 LIQUIDITY SWEEP DETECTION
• Automatically detects when price sweeps above/below swing highs/lows
• Identifies stop-loss hunting by smart money
• Visual lines connect the swept level to the sweep candle
• Tracks up to 20 unswept levels simultaneously
• Configurable lookback and swing length settings
📈 CHANGE IN STATE OF DELIVERY (CISD)
• Detects market structure shifts signaling trend changes
• Bullish CISD: Price closes above previous swing high after forming a swing low
• Bearish CISD: Price closes below previous swing low after forming a swing high
• Clear visual labels mark CISD events on the chart
📐 FIBONACCI PROJECTIONS
• Automatic Fib extensions when CISD occurs
• Projects -2, -2.5, -4, and -4.5 levels
• Helps identify potential take-profit targets
• Can be toggled independently (linked to CISD)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
📅 DAILY FAIR VALUE GAPS (FVG)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
• Detects imbalances from the Daily timeframe
• Shows up to 10 FVGs with dashed midline
• Distinguishes between filled and unfilled gaps
• Customizable colors for bullish/bearish/filled FVGs
• Extends across the chart for easy reference
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
⏰ TRADING SESSIONS
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
• Asian Session (20:00-00:00)
• London Open (02:00-05:00)
• New York Open (07:00-10:00)
• London Close (10:00-12:00)
• NY Close (15:00-16:00)
• Each session has customizable background colors
• Session labels appear centered in each period
• All session times are customizable
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
📊 MULTI-TIMEFRAME BIAS TABLE
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
• Shows market structure bias across 6 timeframes
• 5m, 15m, 1H, 4H, Daily, Weekly
• Visual arrows: ▲ Bullish | ▼ Bearish | — Neutral
• Based on Higher High / Lower Low detection
• Displays sweep count for current session
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🕯️ HIGHER TIMEFRAME CANDLES
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
• Displays last 10 HTF candles on chart right side
• Auto-detects appropriate HTF based on current TF:
- 1m → 15m | 5m → 1H | 15m → 4H
- 1H → Daily | 4H → Weekly | Daily+ → Monthly
• Includes current developing HTF candle
• Clear bullish/bearish body colors
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🎯 HTF LIQUIDITY LEVELS
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
• Shows unswept swing highs/lows from higher timeframe
• Dashed lines extend across chart as liquidity targets
• "HTF Liquidity Area" labels mark key levels
• Automatically removes swept levels
• Separate colors for buy-side and sell-side liquidity
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔔 ALERTS
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
• Liquidity Sweep High/Low
• Bullish/Bearish CISD
• Any Liquidity Sweep
• Any CISD
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
⚙️ CUSTOMIZATION
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
• Bias Filter: Show both, bullish only, or bearish only
• Toggle each feature independently
• Customizable colors for all elements
• Adjustable lookback periods
• Historical setups display count (0-40)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
📈 BEST FOR
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
• Forex pairs (EUR/USD, GBP/USD, etc.)
• Indices (NAS100, US30, SPX)
• Crypto (BTC, ETH)
• Any liquid market
Works on all timeframes from 1-minute to Monthly.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🌐 ACCESS & SUPPORT
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
For access: liquihunter.com/indicator
TK Advanced ATR CalculatorTK Advanced ATR Calculator
What It Does
This tool measures how much your market actually moves each session and tells you if we're in a trending environment or a slow, choppy grind.
Why You Should Care
Stop Getting Your Position Sizing Wrong
While most traders use a static risk or risk based on how they feel, this calculates exactly how much risk makes sense for the current volatility. When markets are calm, you can lean in more with a smaller stop. When they're crazy, it automatically tells you to size down and expand your stop. No more getting stopped out on random spikes or leaving money on the table.
Know What Kind of Game You're Playing
Green line-Markets are stretching, ranges are expanding - trend strategies work
Red line-Things are compressing, getting choppy - maybe sit out or trade ranges
Set Realistic Targets
The estimate tells you what a "normal" day looks like. If we've already moved 80% of the average range, breakout trades are not probable. If we've barely moved, there's probably room to run.
Trade the Right Sessions
You can see which sessions actually deliver movement vs which ones just chop around wasting your time.
Plan Tomorrow Today
At 4 PM every day, you get tomorrow's expected range. So you can actually plan your trades instead of scrambling when the market opens. Game plan with real numbers, not vibes.
## Who Actually Needs This
- Day traders that are tired of getting whipsawed in chop or missing moves in trends
- Anyone who's ever wondered, "Should I be trading smaller here?"
- Traders who want to know if they're late to the party or early
- People who are done guessing and want some actual data
From the creator of TKFlow, happy trading.
Disclaimer
TK Advanced ATR Calculator is provided for educational and informational purposes only and does not constitute financial, investment, or trading advice. Trading and investing involve substantial risk of loss, and you can lose some or all of your invested capital. This indicator calculates historical volatility metrics and does not predict future market movements or guarantee any trading outcomes. Past performance does not indicate future results. You are solely responsible for your own trading decisions, risk management, and capital allocation. By using this tool, you acknowledge that you understand the risks involved in trading and agree not to hold the creator liable for any losses incurred. Always consult with a licensed financial advisor before making investment decisions, and never trade with money you cannot afford to lose.
