Dav1zoN ScalpThis script is a 5-minute scalping setup built around SuperTrend.
Entries are taken on SuperTrend flips on the 5-minute chart
Direction is confirmed with the 15-minute SMA200
Above SMA200 → only BUY trades
Below SMA200 → only SELL trades
This helps avoid sideways markets and low-quality signals
SuperTrend adapts to market volatility, while the higher-timeframe SMA200 keeps trades aligned with the main trend.
Indicators and strategies
ATR Ratio# ATR Ratio Indicator Documentation
## 📊 Indicator Overview
**ATR Ratio** is a technical analysis tool designed to measure the relative strength of market volatility changes. By calculating the ratio between short-term and long-term ATR (Average True Range), traders can quickly identify whether market volatility is accelerating or decelerating.
---
## 🎯 Core Features
This indicator displays two main lines in a separate window:
1. **ATR Ratio Line** (Red): Short-term ATR ÷ Long-term ATR
2. **Trigger Level Line** (Blue): Reference level at default 0.87
3. **1.0 Reference Line** (Gray Dotted): Critical point where volatility is equal
---
## ⚙️ Parameter Settings
| Parameter Name | Default | Description | Suggested Range |
|---------------|---------|-------------|-----------------|
| **Short-term ATR Period** | 7 | Number of bars for short-term volatility | 5-14 |
| **Long-term ATR Period** | 49 | Number of bars for long-term volatility | 30-100 |
| **Trigger Level** | 0.87 | Reference threshold for strategy signals | 0.5-1.0 |
---
## 📈 Interpretation Guide
### Understanding ATR Ratio
- **Ratio > 1.0**: Short-term volatility **exceeds** long-term volatility
- Market volatility is **accelerating**
- May signal trend initiation or breakout
- **Ratio < 1.0**: Short-term volatility **below** long-term volatility
- Market volatility is **decelerating**
- May signal consolidation or trend exhaustion
- **Ratio near Trigger Level (0.87)**:
- Significant volatility contraction
- Potential **quiet period** before breakout
- Good time to prepare entries or set alerts
### Visual Signals
```
┌────────────────────────────────────┐
│ ATR Ratio │
├────────────────────────────────────┤
│ 1.5 ┼ ╱╲ │ ← Volatility Expanding
│ │ ╱ ╲ │
│ 1.0 ┼─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ │ ← Reference Line
│ │ ╱ ╲ │
│ 0.87┼─────────────────────────────│ ← Trigger Level
│ │ ╱ ╲ │
│ 0.5 ┼ │ ← Volatility Contracting
└────────────────────────────────────┘
```
# ATR Ratio 指標說明
## 📊 指標概述
**ATR Ratio**（ATR 比率指標）是一個技術分析工具，用於衡量市場波動性的相對變化強度。透過計算短期與長期 ATR（平均真實波幅）的比率，交易者可以快速識別市場波動性是否在加速或減速。
---
## 🎯 核心功能
此指標在獨立視窗中顯示兩條主要線：
1. **ATR 比率線**（紅色）：短期 ATR ÷ 長期 ATR
2. **觸發水平線**（藍色）：預設為 0.87 的參考水平
3. **1.0 參考線**（灰色虛線）：標示波動性相等的臨界點
---
## ⚙️ 參數設定
| 參數名稱 | 預設值 | 說明 | 建議範圍 |
|---------|-------|------|---------|
| **短期 ATR 週期** | 7 | 計算短期波動性的 K 線數量 | 5-14 |
| **長期 ATR 週期** | 49 | 計算長期波動性的 K 線數量 | 30-100 |
| **觸發水平線** | 0.87 | 策略訊號的參考閾值 | 0.5-1.0 |
---
## 📈 指標解讀
### ATR 比率的意義
- **比率 > 1.0**：短期波動性**大於**長期波動性
- 市場波動正在**加速**
- 可能預示趨勢啟動或突破
- **比率 < 1.0**：短期波動性**小於**長期波動性
- 市場波動正在**減速**
- 可能預示盤整或趨勢衰竭
- **比率接近觸發水平（0.87）**：
- 波動性顯著收斂
- 可能是突破前的**靜默期**
- 適合準備進場或設定警報
### 視覺訊號
```
┌────────────────────────────────────┐
│ ATR Ratio │
├────────────────────────────────────┤
│ 1.5 ┼ ╱╲ │ ← 波動加速
│ │ ╱ ╲ │
│ 1.0 ┼─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ │ ← 參考線
│ │ ╱ ╲ │
│ 0.87┼─────────────────────────────│ ← 觸發水平
│ │ ╱ ╲ │
│ 0.5 ┼ │ ← 波動收斂
└────────────────────────────────────┘
```
---
## 💡 實戰應用
### 1️⃣ 突破前兆識別
當 ATR 比率長時間維持在 **0.6-0.8** 區間，代表市場進入低波動壓縮狀態，通常預示即將發生大幅突破。
**操作策略**：
- 在比率低於 0.87 時設定價格突破警報
- 等待比率快速上升至 1.0 以上時確認突破
- 順勢進場
### 2️⃣ 趨勢強度確認
觀察比率在趨勢中的表現：
- **強勢趨勢**：比率持續維持在 1.0 以上
- **弱勢趨勢**：比率雖大於 1.0 但持續下降
- **趨勢衰竭**：比率跌破 1.0 並持續下滑
### 3️⃣ 風險管理工具
使用 ATR 比率調整部位規模：
- 比率 > 1.2：減少部位（高波動風險）
- 比率 0.8-1.2：正常部位
- 比率 < 0.8：可考慮增加部位（低波動期）
---
## 🔧 使用建議
### 最佳實踐
✅ **結合其他指標**：與價格行為、支撐阻力配合使用
✅ **設定警報**：在觸發水平線處設定警報通知
✅ **多時間框架分析**：同時觀察日線、4 小時線的 ATR 比率
✅ **回測驗證**：根據不同商品調整參數
### 注意事項
⚠️ **不適用於極低波動市場**：如假日或流動性極差時段
⚠️ **需結合價格分析**：單獨使用可能產生假訊號
⚠️ **參數需優化**：不同商品可能需要不同的週期設定
## 🎓 進階應用
### 與其他指標結合
1. **ATR Ratio + 布林通道**
- 布林通道收縮 + ATR 比率 < 0.87 → 高機率突破設定
2. **ATR Ratio + RSI**
- RSI 超買/超賣 + ATR 比率快速上升 → 反轉訊號增強
3. **ATR Ratio + 移動平均**
- 價格突破均線 + ATR 比率 > 1.0 → 趨勢確認
## 📞 常見問題
**Q: 為什麼觸發水平預設是 0.87？**
A: 這是原始指標作者的經驗值，代表波動性顯著收斂的閾值。您可以根據交易商品和策略調整。
**Q: 短期和長期週期應該如何設定？**
A: 預設 7 和 49 適用於日線交易。短線交易者可使用 5/21，波段交易者可使用 14/50。
**Q: 比率可以大於 2.0 嗎？**
A: 可以。極端市場事件（如重大新聞）可能導致比率飆升至 2.0 以上，代表波動性劇烈擴張。
**提示**：建議先在模擬帳戶測試策略，確認參數適合您的交易風格後再實盤使用。
Baby ICT Simple Asia H/L + Sweeps + FVG + Alerts + Do-NothingBaby ICT Simple+ is a lightweight, rules-based TradingView indicator designed to help traders visualize key ICT-style concepts without complexity or signal-chasing. It focuses on Asia session liquidity, after, and fair value gapsto su
This tool is intentionally simple and is meant to be used alongside session timing, price action, and risk management — not as a buy/sell signal generator.
🔍 What This Indicator Displays
But
Automatically tracks and plots the Asia session high and low
Fully customizable line colors and width
These levels often act as liquidity pools before London and New York sessions
Liquidity Sweeps (Post-Asia)
Identifies the first time price takes liquidity above or below the Asia range
Sweep detection can be based on wicks or closes
Optional sweep labels help highlight potential stop-run behavior
Asia Break & Sweep Alerts
Alerts when price breaks the Asia high or low after the Asia session ends
Optional alerts for the first sweep only, helping traders focus on high-quality context
Fair Value Gaps (FVGs)
Detects classic 3-candle price imbalances on the active timeframe
Optional filter to show only FVGs that form after a liquidity sweep
Bullish and bearish FVGs are fully customizable with separate fill and border colors
“Do Nothing” Discipline Labels
Optional warning labels during a user-defined kill zone
Designed to discourage over-trading when:
No liquidity has been taken
Price is stuck mid-range
A sweep occurred but no clean displacement or fresh FVG followed
🧠 Intended Use
This indicator supports a “Baby ICT” approach, emphasizing:
Waiting for liquidity to be taken before looking for entries
Using Fair Value Gaps as entry zones, not signals
Avoiding mid-range and low-probability environments
Trading primarily during active sessions (London / New York)
Best used on:
5-minute charts
Index futures (ES, NQ) or liquid FX pairs
With session-based execution and strict risk control
🚫 What This Indicator Is NOT
❌ Not a buy/sell signal tool
❌ Not an automated trading strategy
❌ Not predictive or guaranteed
All trade decisions remain the responsibility of the trader.
⚠️ Risk Disclaimer
Trading involves risk. This indicator is provided for educational and informational purposes only and does not constitute financial advice. Always manage risk responsibly and test any tool thoroughly before using it in live markets.
✨ Final Notes
If you are looking for a clean, non-hype way to visualize:
Where liquidity is likely taken
Where price may rebalance
When it’s best to stand aside
Baby ICT Simple+ was built for that purpose.
ORB 8:15 ORB XenoDuckyORB 8:15 ORB EST XenoDucky - This is an indicator to help you use the ORB strategy on the 8-815am open candle for NYSE
Apexflow PRO: Anchored Fair Value + Regime Readiness [v6]## Apexflow PRO — Anchored Fair Value Cloud + Regime Readiness (Non-Repaint Signals)
**Apexflow PRO** is an overlay indicator built to answer one core trading question:
**“Is price currently cheap, fair, or expensive — and is the market in a regime where that matters?”**
Instead of throwing random signals at you, Apexflow PRO combines **anchored fair value**, **market regime detection**, **flow participation**, and **optional cross-market confirmation** into a single, easy-to-read system with a **Readiness Score (0–100)** and clean, non-spam alerts.
---
# What you see on the chart
### 1) Anchored Fair Value Cloud (the “tunnel”)
This is the heart of the indicator.
* **Midline = Anchored VWAP fair value**
* Resets by **Day / Week / Month** (you choose).
* **Cloud = 3-layer adaptive tunnel**
* **Core (blue)** = “fair pricing zone”
* **Upper red layers** = increasingly stretched/expensive
* **Lower teal layers** = increasingly stretched/cheap
**Interpretation (beginner-simple):**
* **Inside blue core** → “priced fairly”
* **Below the tunnel** → “cheap / discounted”
* **Above the tunnel** → “expensive / premium”
* **Outer layers** → “extreme stretch” zones (higher snap-back risk)
### 2) Regime label (context filter)
Apexflow labels the market environment as:
* **TRENDING**
* **CHOP/RANGE**
* **VOLATILE**
* **BREAKOUT**
This prevents “using the right tool in the wrong market.”
Example: mean reversion works better in chop; trend continuation works better in trend/breakout regimes.
### 3) Readiness Score (0–100)
This is the **strength of confluence** between the engines.
* Low score = mixed signals / noise
* High score = alignment / higher-quality conditions
### 4) BUY / SELL signals (non-spam)
Signals trigger only when:
* **Readiness crosses above your threshold** (first bar only)
* **Regime filter agrees**
* **Structure agrees** (reclaim midline / lose midline OR location within the tunnel)
* **Cooldown** prevents rapid repeats
---
# What’s behind it (advanced, but readable)
Apexflow PRO uses four engines:
## A) Anchored Fair Value Engine (core)
A true anchored VWAP-style accumulator:
* Aggregates **price × volume** and **volume**
* Resets on your chosen anchor period
* Produces a stable “fair value spine”
### Stable Mode (important)
When **Stable Mode = ON**, Apexflow **does not drift intrabar** on live candles.
The anchored midline and tunnel update on confirmed bar closes to avoid the classic “wiggling anchor” problem.
## B) Regime Engine (Trend/Chop/Breakout/Volatile)
Uses multiple independent measures (not just one):
* **ADX** = trend strength
* **Efficiency Ratio (ER)** = trend efficiency vs chop
* **BB Width %Rank** = compression / squeeze context
* **ATR %Rank** = volatility regime context
This produces both a **regime label** and a **regime confidence score** used in the composite.
## C) Flow Engine (participation + intent proxy)
A blended participation model:
* **Signed candle pressure** (body vs range scaled by volume)
* **Wick rejection bias** (rejection strength)
* **RVOL** (relative volume lift)
This helps distinguish “real moves” from low-quality drifts.
## D) Cross-Market Confirmation (optional)
A light macro filter to reduce false positives:
* **Equities:** VIX (inverse risk)
* **Forex:** DXY (inverse USD pressure)
* **Crypto:** BTC.D (risk tone proxy)
If the cross-market symbol is unavailable, the script **falls back gracefully** and automatically reduces its weight.
---
# How to use (simple rules)
## Trend Following mode (default)
Best when you want to ride directional moves.
**BUY idea:**
* Readiness crosses above threshold
* Regime is **TRENDING** or **BREAKOUT**
* Price is reclaiming the midline OR is occurring from the lower half of tunnel
**SELL idea:**
* Same logic in reverse (lose midline / upper half)
**Practical beginner rule:**
> In Trend mode, treat the midline like “bias.”
> If price is above the midline and score is strong → favor longs.
> If below and score is strong → favor shorts.
## Reversion mode
Best in chop/range markets.
* Signals are biased toward **mean reversion**
* Use tunnel extremes as “stretch zones”
* Targets often gravitate back toward the **midline / inner bands**
---
# Best settings & timeframes (starting points)
These are practical defaults (not magic):
### Crypto
* 15m / 1H / 4H
* Anchor Reset: **Week**
* Threshold: **60–70**
### Equities / Indices
* 5m / 15m / 1H
* Anchor Reset: **Day or Week**
* Threshold: **60–75**
### Forex
* 15m / 1H
* Anchor Reset: **Day**
* Threshold: **60–75**
If signals feel too frequent: raise **Threshold** or increase **Cooldown**.
If signals feel too rare: lower **Threshold** slightly or reduce **Cooldown**.
---
# Alerts
Included:
* **Apexflow PRO Long**
* **Apexflow PRO Short**
These fire only when the indicator triggers a confirmed, threshold-cross event (designed for clean alerting).
---
# Notes & limitations (honest)
* This is not a “predict the future” tool — it’s a **context + fair value + confluence** system.
* Cross-market filters are helpful, but not universal. If you trade niche assets, consider turning cross-market OFF or customizing the reference symbol.
* Always use risk management. A strong score is not a guarantee.
Price HighlightsThis script shows you price highlights that you define. You can choose what price interval and how many to show above and below the current price. I made this to help me choose a strike price quickly when trading options but also found it useful for visualizing price targets for quick futures scalps.
LOTS Zones Maker v1.0LOTS Zones Marker is a TradingView indicator designed to automatically identify Buy Zones and Sell Zones based on price behavior, and visually display them as clear zone boxes on the chart.
The indicator continuously scans the market for potential demand and supply areas, helping traders quickly recognize high-probability price reaction zones without manual drawing.
When multiple Buy Zones or Sell Zones overlap or intersect at the same price area, the indicator classifies this area as a Zing Zone — a proprietary concept from LOTS Academy.
Zing Zones represent concentrated market interest, where repeated zone formation suggests stronger significance and higher attention from market participants.
Key Features
Automatically detects Buy Zones and Sell Zones
Draws zones clearly as price boxes on the chart
Identifies overlapping zones as Zing Zones
Helps highlight areas of strong price reaction potential
Reduces chart clutter and manual analysis time
LOTS Zones Marker is suitable for traders who focus on price action, supply & demand, and zone-based trading, and can be used across multiple timeframes and markets.
PREZ~QT Dividers by TimeframePREZ~QT Dividers by Timeframe is a lightweight chart utility based on Daye's Quarterly Theory that automatically displays the most relevant time-based dividers depending on the timeframe you are viewing. The indicator adapts dynamically, keeping your chart clean while still showing the higher-timeframe structure that matters.
How it works
The script automatically maps dividers to specific timeframes for:
*Micro cycle
* 90-Minute cycle
* Daily cycle
* Weekly cycle
* Monthly cycle
* Yearly cycle
Each divider is drawn as a vertical line at the exact opening of the higher-timeframe period, helping you visually align intraday price action with key market structure shifts.
Why use it
* Keeps charts clean and uncluttered
* Automatically adjusts when you change timeframes
* Helps identify micro, 90 minute, daily, weekly, monthly and yearly quarters
* Ideal for intraday traders, swing traders, and ICT & Daye's Quarterly theory traders
* No manual switching or multiple indicators needed
Best use cases
* Time-based trading
* Time & price confluence
* Market structure analysis
* Gold, FX, indices, and futures trading
Notes
* Best when paired with Daye @joshuuu indicator
* Designed for exact timeframe matching (no interpolation)
* Quarter dividers are configurable via inputs
* Built using Pine Script v5
PW-O Pressure Oscillator (Normalized + Volume Safe)The PW-O Pressure Oscillator is a normalized, volume-safe momentum tool designed to measure true buying and selling pressure, not just price movement.
Instead of reacting late like traditional oscillators, PW-O evaluates candle efficiency, force, and pressure continuity, allowing traders to identify healthy trends, weakening momentum, compression, and exhaustion before price structure breaks.
Built for futures, intraday trading, and volatile markets (NQ / ES / Crypto).
Core Features
Pressure-Based Engine (not price-based)
Volume-Weighted (Safe-Clamped)
Normalized for All Markets
Dynamic Strength Zones
Compression & Exhaustion Detection
Non-Repainting
How It Works
PW-O analyzes each candle by:
Body vs range efficiency
Directional force
Volume participation (safely bounded)
Pressure memory over time
Pressure is accumulated, smoothed, and normalized so readings remain consistent across sessions and volatility regimes.
How to Read the Indicator
Zero Line Bias
Above 0 → Bullish pressure dominance
Below 0 → Bearish pressure dominance
Pressure Histogram
Rising bars → Increasing pressure
Falling bars → Weakening pressure
Flat pressure → Compression / balance
Dynamic Strength Zones
Pressure expanding beyond zones = strong participation
Failure to hold zones = trend vulnerability
Zones adapt automatically to market conditions.
Compression
Compression appears when:
Pressure slope flattens
Pressure decays toward its EMA
Often precedes:
Breakouts
Trend continuation
Reversals
Exhaustion Signals
Bull Exhaustion: Price makes higher highs while pressure weakens above upper zone
Bear Exhaustion: Price makes lower lows while pressure weakens below lower zone
Exhaustion highlights loss of force, not immediate reversal.
Trading Edge
PW-O provides insight into momentum quality, not just direction.
Advantages over traditional oscillators:
Detects weakening moves early
Filters low-quality breakouts
Confirms pullbacks in strong trends
Adapts to volatility automatically
Avoids fixed overbought/oversold traps
Best Use
PW-O is best used as a confirmation and filtering tool, combined with:
EMA / VWAP trend bias
Market structure
Entry timing strategies
It is not intended as a standalone signal generator.
Markets & Timeframes
Optimized for NQ / ES
Works on all timeframes
Compatible with crypto & equities
Author Notes
This indicator is designed to reflect pressure flow and participation, not lagging momentum.
Focus on pressure behavior, not single-bar signals.
Dav1zoN PRO: MACD + RSI + ADXThis indicator is a momentum and trend-strength tool designed to stay clear and readable on all timeframes, especially lower TFs where most indicators become noisy or flat.
It combines MACD Histogram, RSI, and ADX into a single adaptive system, with automatic scaling and smoothing, so values stay proportional without using static horizontal levels.
Momentum RSI PanelRSI Divergence Panel is a multi-timeframe RSI analysis tool designed to help traders understand momentum behavior, divergence conditions, and RSI structure more clearly.
Key Features
Dual RSI waves from different timeframes for better context
Bank Nifty RSI as a reference comparison
Clean single-color cloud to visualize RSI compression and expansion
Custom overbought and oversold zones with background highlights
Simple bullish and bearish divergence visualization
Alert support for RSI zone entries
How to Use: This indicator is intended for momentum confirmation and divergence awareness.
It is not a complete trading system and should be used along with price action and proper risk management.
Disclaimer: This script is for educational and analytical purposes only.
It does not provide financial advice or guaranteed results.
VX-STRUCT by Ikaru-s-VX-STRUCT - Liquidity Levels visualizes market structure–based liquidity zones using confirmed swing pivots.
The indicator automatically tracks bullish and bearish structure, anchors key levels to the originating impulse, and projects high-probability reaction zones.
Designed for clean charts and discretionary traders:
Pivot-based market structure detection.
Dynamic liquidity levels aligned to real price action.
Optional local high reference.
Subtle glow for clear visual separation.
No signals. No repaint. Structure and context only.
Cheers 🍸
HOANO GikaV1❤️ Link indicator : t.me
------------------------------------------
HOANO GikaV1 : is a special, custom-designed indicator. It is a private (invite-only) indicator, created specifically for analysis and testing purposes.
This indicator is not intended for public use and requires the author’s permission before being applied to any chart. There are no guarantees or assurances of profit. The indicator is provided “as is” and is for educational and reference purposes only.
If you wish to be granted access, please contact the author directly.
HOANO ALGO❤️ Link indicator : t.me
-----------------------------------------
HOANO ALGO : is a special, custom-designed indicator. It is a private (invite-only) indicator, created specifically for analysis and testing purposes.
This indicator is not intended for public use and requires the author’s permission before being applied to any chart. There are no guarantees or assurances of profit. The indicator is provided “as is” and is for educational and reference purposes only.
If you wish to be granted access, please contact the author directly.
SPX 0.5% Move + Volume Filter.5%+ move in SPX in 2 minute candle. Usage for creating an alert for web hook trigger or basic alert.
Penny Chart (FX auto + Metals/Indices toggle)Penny Chart Price point lines.
Compatible with both JPY and Non-JPY pairs.
RSI Dav1zoNThe RSI Grid is a multi-timeframe momentum dashboard designed to give a quick, structured view of market bias across several timeframes at once.
Instead of checking RSI on each timeframe manually, the grid shows direction, RSI value, and projected price levels in one place.
Monte Carlo Simulation BandsMonte Carlo Simulation v2.4.2
Plots a one-bar-ahead price distribution band built from many simulated paths. The green band shows empirical percentiles of simulated final prices—these are distribution bounds, not a confidence interval of the mean.
What It Does
Simulates many one-bar price paths using a directional random walk with volatility scaling (uniform shocks, not Gaussian GBM).
Plots Mean Forecast, Median Forecast, and configurable percentile bounds (default 5th/95th).
Optional rolling HTF-days mean line (yellow) for trend context.
Optional labels and forward projection lines.
Alerts when the confirmed close breaks above or below the percentile band.
Non-Repainting & HTF Behavior (Fail-Closed)
All calculations are gated to confirmed bars only via explicit no_repaint_ok gate (barstate.isconfirmed).
If you select an HTF Resolution, the script uses a strict request.security(..., lookahead_off, gaps_off) pipeline.
If HTF data is unavailable, outputs are na—no silent fallback to chart timeframe.
A separate "HTF Alignment (lagged)" plot shows the prior HTF close (htf_price ) as visual proof of no look-ahead.
Volatility Source & Scaling
If "Use Historical Volatility" is enabled, volatility is estimated from log returns on the selected resolution (HTF if set, otherwise chart).
Annualization adapts to session type:
Equities: 6.5 hours/day, 252 trading days/year
Crypto: 24 hours/day, 365 days/year
Substeps increase path smoothness within the same one-bar horizon—they do not extend the forecast to multiple bars.
Key Inputs
• Prob Up / Prob Down — Must satisfy Prob Up + Prob Down ≤ 1.0. If violated, simulation is skipped and table shows "✗ PROB>1".
• # Simulations / # Substeps — Higher = smoother/more stable, but slower. Default 100×100 is a good balance.
• Lower/Upper Percentile — Define the band width (e.g., 5 and 95 for a 90% distribution band).
• Run On Last Bar Only — Performance mode (recommended). Skips historical computation; updates on each new confirmed bar.
• Resolution (HTF) — Leave blank for chart timeframe, or set to Weekly/Monthly for HTF-aligned simulation.
• Crypto 24/7 Session? — Enable for crypto markets to use correct annualization (365d, 24h).
How to Use (Quickstart)
Start with defaults and keep Run On Last Bar Only = true for speed.
Set Prob Up and Prob Down so their sum ≤ 1.0 (e.g., 0.5 + 0.5 = 1.0 for neutral).
Enable "Use Historical Volatility" and set a Volatility Lookback (e.g., 20 bars) for data-driven vol.
Set Resolution (HTF) if you want the model to run on higher timeframe data (e.g., 1W). Expect updates only when a new HTF interval starts.
Choose percentiles (e.g., 5 and 95) to define your distribution band width.
Enable alerts for "Price Above Upper Percentile" or "Price Below Lower Percentile" to get notified of breakouts.
Limitations & Disclosures
Forecast horizon is one bar only. Substeps do not create a multi-bar forecast.
Model uses uniform shocks with direction chosen from Prob Up/Down. This is not Geometric Brownian Motion (GBM) and is not calibrated to any option-implied distribution.
Bounds are percentiles of final simulated prices, not a statistical confidence interval of the mean.
HTF mode updates at the start of a new HTF interval (first chart bar where the HTF timestamp changes), so the band appears "step-like" in realtime.
Historical volatility requires enough bars for the selected lookback; until then, values may be na.
Performance depends on Sims × Substeps; extreme settings (e.g., 500×500) can be slow.
This indicator does not predict direction—it shows a probabilistic range based on your inputs.
The Vector Alignment Matrix (VAM) - Pivot ExitIndicator Description: The Vector Alignment Matrix (VAM) – Pivot Exit Edition
The Vector Alignment Matrix (VAM) is an institutional-grade technical analysis tool designed for TradingView. It operates as a trend-following confluence engine, ensuring that lower-timeframe execution only occurs when supported by the "Weight of the Market"—the high-timeframe trend.
By automating the "Top-Down Analysis" methodology, VAM removes trader subjectivity and provides a clear, mechanical framework for entries and exits based on market structure.
Core Mechanics
1. The Global Matrix (HTF Alignment)
The indicator continuously monitors three critical timeframes: the Weekly (W), Daily (D), and 4-Hour (4H).
It uses a price-relative-to-range calculation to determine if the trend is Bullish or Bearish.
A "Matrix Bias" is established only when at least two of these timeframes agree.
This bias acts as a safety switch: if the Matrix is BULLISH, the indicator will ignore all sell signals, and vice versa.
2. Vector Execution (Break of Structure)
Once a bias is confirmed, the VAM looks for a Break of Structure (BOS) on the chart you are actively viewing.
It identifies significant Pivot Highs and Pivot Lows.
A signal is generated when price closes beyond a pivot in the direction of the Matrix Bias. This represents the moment the market "reveals its hand," confirming that the high-timeframe momentum is being absorbed by the lower timeframe.
3. Dynamic Pivot-Targeting (The Exit)
Unlike standard indicators that use arbitrary math for targets, the VAM uses Organic Exits.
Take Profit (TP): The indicator identifies the previous significant pivot level (resistance for longs, support for shorts) and sets it as the target.
Stop Loss (SL): The protective stop is anchored to the most recent opposing pivot, protecting the trade behind a structural barrier.
Structura Candles Volume 1 v1.0█ OVERVIEW
Structura Candles Volume 1 is an advanced candlestick pattern recognition indicator based on the research methodology of Thomas N. Bulkowski's "Encyclopedia of Candlestick Charts." This indicator identifies 19 statistically-validated candlestick patterns and provides real-time backtesting against your current chart.
█ METHODOLOGY
Unlike traditional candlestick indicators that rely on theoretical pattern behavior, this script implements Bulkowski's empirical approach:
- Trend Detection: 10-period EMA to define short-term trend context
- Tall Candle Filter: 146% of 22-day average height threshold (statistically significant candles)
- Breakout Confirmation: Tracks whether price breaks above pattern high or below pattern low within a user-defined window
- Non-Repainting: Signals only confirm on bar close
█ PATTERNS INCLUDED
LONG Signals (Bullish):
- Three-Line Strike Bearish (84% reversal rate per Bulkowski)
- Engulfing Bullish
- Morning Star / Morning Doji Star
- Belt Hold Bullish
- Abandoned Baby Bullish
- Rising Window
- Three Inside Up
- Three Outside Up
SHORT Signals (Bearish):
- Engulfing Bearish
- Three Black Crows
- Evening Star / Evening Doji Star
- Abandoned Baby Bearish
- Two Black Gapping
- Falling Window
- Belt Hold Bearish
- Three Inside Down
- Three Outside Down
█ FEATURES
- Real-time pattern detection with LONG/SHORT direction
- Dynamic win rate calculation based on YOUR chart's historical performance
- Comparison to Bulkowski's book statistics
- Label colors update based on outcome:
🟡 Yellow = Pending (awaiting breakout)
🟢 Green = WIN (correct breakout direction)
🔴 Red = LOSS (wrong breakout direction)
⚪ Gray = Timeout (excluded from statistics)
- Separated LONG vs SHORT performance dashboard
- Adjustable breakout timeout window
█ HOW TO USE
1. When a pattern appears, the label shows direction (LONG/SHORT) and historical win rate
2. Wait for bar close confirmation (✓ CONFIRMED status)
3. Monitor subsequent bars for breakout above pattern high (bullish) or below pattern low (bearish)
4. Use the dashboard to identify which patterns perform best on your specific instrument
█ IMPORTANT DISCLAIMER
- Past performance does not guarantee future results
- The "Book WR" values are from Bulkowski's historical research on US equities and may differ across instruments, timeframes, and market conditions
- This indicator is for educational and analytical purposes only
- Always use proper risk management and do your own analysis before trading
- The win rates displayed are based on the breakout methodology, not actual trade profitability
█ SETTINGS
- Max Bars to Breakout: How long to wait for pattern confirmation (default: 10)
- Pattern Toggles: Enable/disable individual patterns
- Bulkowski Parameters: Adjust trend EMA, height threshold, and doji tolerance
█ ACCESS
This is an invite-only script. For access, please send a direct message.
MA12 x MA80 Bands Signals - JAMMALMA12 × MA80 Bands Signal – Trend Assistant | Jammal
This script provides a clean and simple entry-timing assistant based on the interaction between MA12 and dynamic bands around MA80.
It helps visualize potential trend-based entry points with clear and non-intrusive signals.
The MA80 bands are fully adjustable, allowing you to customize the sensitivity based on the market and timeframe.
Features:
Trend-based entry assistance
MA12 cross with MA80 dynamic bands
Adjustable MA80 bands (user-controlled offset)
Clear triangles, labels, and short horizontal levels
Works on all markets and all timeframes
Helps visualize trend interaction and entry timing
Designed for traders who want a simple, clean, and supportive trading tool.
Supporting tool only – not a complete trading system.
Enjoy and happy trading!
Jammal
