Black FridayUp to 80% OFF

Search in scripts for "电力行业+股票+11年涨幅"

Technical Ratings█  OVERVIEW This indicator calculates TradingView's well-known "Strong Buy", "Buy", "Neutral", "Sell" or "Strong Sell" states using the aggregate biases of 26 different technical indicators. █  FEATURES Differences with the built-in version  • You can adjust the weight of the Oscillators and MAs components of the rating here.  • The built-in version produces values matching the states displayed in the "Technicals" ratings gauge; this one does not always, where weighting is used.  • A strategy version is also available as a built-in; this script is an indicator—not a strategy.  • This indicator will show a slightly different vertical scale, as it does not use a fixed scale like the built-in.  • This version allows control over repainting of the signal when you do not use a higher timeframe. Higher timeframe (HTF) information from this version does not repaint.  • You can configure markers on signal breaches of configurable levels, or on advances declines of the signal. The indicator's settings allow you to:  • Choose the timeframe you want calculations to be made on.  • When not using a HTF, you can select a repainting or non-repainting signal.  • When using both MAs and Oscillators groups to calculate the rating, you can vary the weight of each group in the calculation. The default is 50/50.   Because the MAs group uses longer periods for some of its components, its value is not as jumpy as the Oscillators value.   Increasing the weight of the MAs group will thus have a calming effect on the signal.  • Alerts can be created on the indicator using the conditions configured to control the display of markers. Display The calculated rating is displayed as columns, but you can change the style in the inputs. The color of the signal can be one of three colors: bull, bear, or neutral. You can choose from a few presets, or check one and edit its color. The color is determined from the rating's value. Between 0.1 and -0.1 it is in the neutral color. Above/below 0.1/-0.1 it will appear in the bull/bear color. The intensity of the bull/bear color is determined by cumulative advances/declines in the rating. It is capped to 5, so there are five intensities for each of the bull/bear colors. The "Strong Buy", "Buy", "Neutral", "Sell" or "Strong Sell" state of the last calculated value is displayed to the right of the last bar for each of the three groups: All, MAs and Oscillators. The first value always reflects your selection in the "Rating uses" field and is the one used to display the signal. A "Strong Buy" or "Strong Sell" state appears when the signal is above/below the 0.5/-0.5 level. A "Buy" or "Sell" state appears when the signal is above/below the 0.1/-0.1 level. The "Neutral" state appears when the signal is between 0.1 and -0.1 inclusively. Five levels are always displayed: 0.5 and 0.1 in the bull color, zero in the neutral color, and -0.1 and - 0.5 in the bull color. The levels that can be used to determine the breaches displaying long/short markers will only be visible when their respective long/short markers are turned on in the "Direction" input. The levels appear as a bright dotted line in bull/bear colors. You can control both levels separately through the "Longs Level" and "Shorts Level" inputs. If you specify a higher timeframe that is not greater than the chart's timeframe, an error message will appear and the indicator's background will turn red, as it doesn't make sense to use a lower timeframe than the chart's. Markers Markers are small triangles that appear at the bottom and top of the indicator's pane. The marker settings define the conditions that will trigger an alert when you configure an alert on the indicator. You can:  • Choose if you want long, short or both long and short markers.  • Determine the signal level and/or the number of cumulative advances/declines in the signal which must be reached for either a long or short marker to appear.   Reminder: the number of advances/declines is also what controls the brightness of the plotted signal.  • Decide if you want to restrict markers to ones that alternate between longs and shorts, if you are displaying both directions.   This helps to minimize the number of markers, e.g., only the first long marker will be displayed, and then no more long markers will appear until a short comes in, then a long, etc. Alerts When you create an alert from this indicator, that alert will trigger whenever your marker conditions are confirmed. Before creating your alert, configure the makers so they reflect the conditions you want your alert to trigger on. The script uses the alert() function, which entails that you select the "Any alert() function call" condition from the "Create Alert" dialog box when creating alerts on the script. The alert messages can be configured in the inputs. You can safely disregard the warning popup that appears when you create alerts from this script. Alerts will not repaint. Markers will appear, and thus alerts will trigger, at the opening of the bar following the confirmation of the marker condition. Markers will never disappear from the bar once they appear. Repainting This indicator uses a two-pronged approach to control repainting. The repainting of the displayed signal is controlled through the "Repainting" field in the script's inputs. This only applies when you have "Same as chart" selected in the "Timeframe" field, as higher timeframe data never repaints. Regardless of that setting, markers and thus alerts never repaint. When using the chart's timeframe, choosing a non-repainting signal makes the signal one  bar late, so that it only displays a value once the bar it was calculated has elapsed. When using a higher timeframe, new values are only displayed once the higher timeframe completes. Because the markers never repaint, their logic adapts to the repainting setting used for the signal. When the signal repaints, markers will only appear at the close of a realtime bar. When the signal does not repaint (or if you use a higher timeframe), alerts will appear at the beginning of the realtime bar, since they are calculated on values that already do not repaint. █  CALCULATIONS The indicator calculates the aggregate value of two groups of indicators: moving averages and oscillators. The "MAs" group is comprised of 15 different components:  • Six Simple Moving Averages of periods 10, 20, 30, 50, 100 and 200  • Six Exponential Moving Averages of the same periods  • A Hull Moving Average of period 9  • A Volume-weighed Moving Average of period 20  • Ichimoku‎ The "Oscillators" group includes 11 components:  • RSI  • Stochastic  • CCI  • ADX  • Awesome Oscillator  • Momentum  • MACD  • Stochastic RSI  • Wiliams %R  • Bull Bear Power  • Ultimate Oscillator The state of each group's components is evaluated to a +1/0/-1 value corresponding to its bull/neutral/bear bias. The resulting value for each of the two groups are then averaged to produce the overall value for the indicator, which oscillates between +1 and -1. The complete conditions used in the calculations are documented in the Help Center . █  NOTES Accuracy When comparing values to the other versions of the Rating, make sure you are comparing similar timeframes, as the "Technicals" gauge in the chart's right pane, for example, uses a 1D timeframe by default. For coders We use a handy characteristic of array.avg() which, contrary to avg() , does not return na when one  of the averaged values is na . It will average only the array elements which are not na . This is useful in the context where the functions used to calculate the bull/neutral/bear bias for each component used in the rating include special checks to return na whenever the dataset does not yet contain enough data to provide reliable values. This way, components gradually kick in the calculations as the script calculates on more and more historical data. We also use the new `group` and `tooltip` parameters to input() , as well as dynamic color generation of different transparencies from the bull/bear/neutral colors selected by the user. Our script was written using the PineCoders Coding Conventions for Pine . The description was formatted using the techniques explained in the How We Write and Format Script Descriptions PineCoders publication. Bits and pieces were lifted from the PineCoders' MTF Selection Framework . Look first. Then leap.
Pine Script® indicator
by TradingView
49
OptionsMillionaire SPY Moving Averages and Signalsby ColeJustice OptionsMillionaire's SPY Options trading system is based mainly on these indicators: - 8 EMA* - 21 EMA* - 100 SMA* - 200 SMA* - MACD - RSI - Squeeze Momentum (*provided by this indicator) and follows these rules: | | 1) I never fight the trend. If its green, i buy calls. If its red, i buy puts. I will only buy puts on a green day if there is a overall change in market trend. Inversely, calls on a red day | 2) Price action is my #1 indicator. I wait for it to confirm my thesis before i enter a trade | 3) I only trade SPY Options | 4) My baseline is to choose a call/put that has a DTE (Date To Expiration) 6-7 days out, with a strike $2-$3 away. I adjust that to fit my current appetite for volatility. i virtually never play same day DTE's. | 5) I set a 10% stop, but usually exit at 8% before my stop triggers depending on current situation | 6) I utilize about 10-20% of my Portfolio for one trade. Sometimes more. Rarely less. | 7) I never hold overnight in these market conditions. | 8) I shoot for 10-20% for gains. Depending on market conditions. | 9) Always look for confirmations in your indicators. | 10) I never force a trade. No trade is a good trade too if the entry just isn't there. | 11) Patience always pays off. A great set-up can form in minutes or seconds. I never regret being patient to enter. I nearly always regret rushing into a trade. | This indicator combines the moving averages into a single unit to simplify one part of the indicator usage rules: the 8 EMA / 21 EMA Cross. . The 8 crossing over the 21 is a Bullish signal, while the 8 crossing under the 21 is a Bearish signal. This indicator places flags at these crossover/under points, as well as shading the area between the 8 and 21 EMAs to help visualize the strength of the trend; green during a Bullish cross, and red during a Bearish cross. A new addition to this strategy is the Hull Moving Average, or HMA. This script defaults to an HMA of 20 and shows alerts when candles close above or below the plot in the form of green and red candle backgrounds. This alert is best used in conjunction with the main crossovers and should be considered an addition level of confidence rather than providing trade entry/exits directly. This indicator is more flexible and you should feel free to adjust the period if you find a different value works better within your own personal trading style. Each individual element of this indicator can be modified or toggled, providing maximum customization. While you should strive to become comfortable with the default settings, these options are provided in case you feel the need to adjust for your own style (or if testing on tickers other than SPY, for example). Goodluch, and happy trading!
Pine Script® indicator
by colejustice
66
[DS]Entry_Exit_TRADE.V01-StrategyThe proposal of this script is to show the possible trading points of BUY and SELL based on the 15-minute chart of the Nasdaq Future Index. The start point of the strategy was schedule for 2021/01/01 and until the time of this publication (2021/01/31), for 1 index contract the results presented area a Gross Profit of 2.97% with a Net Profit of 1.35%. █ FEATURES The indicator shows on the graph the position of the MACD and TSI indicators that are the places of strength among Buyers and Sellers. It's possible to observe a sharp fall or rise in the price of these positions. On the current candle, a label is displayed containing the value of the William %R Mod indicator, which will display the OverBought position (dark red) and OverSold position (dark green). The other colors like light red and green are the regions where the price makes the decision of which direction to go. There are also other indicators: a) The positions of the BUY (light green) and SELL areas (light red); b) The label with the position of BUY (dark green) and SELL (dark red) with the line that connects these points; c) DEMA 72 (orange); d) EmaOchl4 in the color green for BULL and red for BEAR market; e) Pivots high and low f) Maximum (purple light) and minimum areas (blue light) █ FUNCTIONS AND SETTINGS The indicator uses the following functions: (1) DEMA - Double Exponential Moving Average (08,17,34, 72) (2) ema () - Exponential Moving Averge (72, ohlc4) (3) plot() (4) barcolor() (5) cross() (6) pivots () (7) William R% Md (OverBought = -7, OverSold=-93) (8) Maximum and Minimum Value (9) fill() (10) macd () - Moving Average Convergence Divergence (Fast Lengt=12, Slow Length=26, Source=close, Signal Smoothing=9) (11) tsi() - Trading Strenght Indicator==> Índice de Força Real ( IFR ) (Long Length=72, Short Length=17, Signal Length=17) (12) Buy and Sell TRADE Points █ PERFORMANCE AND ERRORS The positions of BUY and SELL points are defined through the crossing of the Dema 34 candles with the Ema Ohcl4. As it is an indicator, it can present different positions from de market direction. Thus there is a need to observe the direction of the market in order to verify whether the indicate decision is really acceptable. The decision to BUY or SELL an asset must be well studied to avoid financial losses. The indicator will only help you in this decision, is your responsibility the decision of entering or leaving an asset. █ THANKS TO PineCoders for all they do, all the tools and help they provide, and their involvement in making a better community. All the PineCoders, Pine Pros, and Pine Wizards, people who share their work and knowledge for the sake of it and helping others, I'm very happy and grate full indeed. █ NOTE If you have any suggestions for improving the script or need help using it, please send a message in the comments
Pine Script® strategy
by DalmarSantos
20
AlertiTI can't be glued to all charts on all tickers all the time. I have a life you know, lol. So in the spirit of getting fresh air, running errands, working and having fun with family & friends, I setup this AlertiT script. Three indicators: RSI, SMA and Momentum are used in this script alert. The alert will be triggered if any of the indicators crosses a specified input. The message will contain the name of the indicator and its current value. The default is 13 SMA, 9 RSI +75:-25 and 11 Momentum. I provided an input in the dialogue box so the variables can be adjusted to suit your needs. Source is open, high, low, close. Do your own due diligence, your risk is 100% your responsibility. You win some or you learn some. Consider being charitable with some of your profit to help humankind. Small incremental steps work : If you double a penny a day for a month it = $5,368,709. Good luck and happy trading friends... *3x lucky 7s of trading* 7pt Trading compass: Price action, entry/exit Volume average/direction Trend, patterns, momentum Newsworthy current events Revenue Earnings Balance sheet 7 Common mistakes: +5% portfolio trades, risk management Beware of analysts motives Emotions & Opinions FOMO : bad timing Lack of planning & discipline Forgetting restraint Obdurate repetitive errors, no adaptation 7 Important tools: Trading View app!, Brokerage UI Accurate indicators & settings Wide screen monitor/s Trading log (pencil & graph paper) Big organized desk Reading books, playing chess Sorted watch-list Checkout my indicators: Fibonacci VIP - volume Fibonacci MA7 - price pi RSI - trend momentum TTC - trend channel AlertiT - notification www.tradingview.com
Pine Script® indicator
by Options360
4
(FINNIFTY) NIFTY Financial Service FreeFloat VolumeThis indicator is build keeping in mind how the Indian Market is formed - the free-float market capitalization concept 1) Considered new FINNIFTY - Nifty Financial Service index stocks according to NSE 2) Multiplied each stock Volume by its Weightage given in NSE Site every month End - means giving importance to volume by its weightage 3) Green Candle - Considered as +Ve Volume , Red Candle - Considered as -Ve Volume 4) Diff of +Ve Volume & -Ve Volume give clear picture market will go up or down Note:- This Indicator work only for 15 Min time frame Gives better results good Risk Reward used near Supp/Resistance Combine with FINNIFTY Advance-Decline Ratio give confidence on the move Eg:- Bullish Scenario Near Support, Volume Turned -Ve to +Ve, Adv /Dec of Fin Nifty >11/15 or combine any candle patterns( Pin Bar ) at Sup/Res or combine with Chart Pattern(Triangle/ Rectangle ) Bearish Scenario - Vice Versa to above
Pine Script® indicator
by SharemarketRaja
5
Efficient Work [LucF]█  OVERVIEW Efficient Work measures the ratio of price movement from close to close ( resulting work ) over the distance traveled to the high and low before settling down at the close ( total work ). The closer the two values are, the more Efficient Work approaches its maximum value of +1 for an up move or -1 for a down move. When price does not change, Efficient Work is zero. Higher values of Efficient Work indicate more efficient price travel between the close of two successive bars, which I interpret to be more significant, regardless of the move's amplitude. Because it measures the direction and strength of price changes rather than their amplitude, Efficient Work may be thought of as a sentiment indicator. █  CONCEPTS This oscillator's design stems from a few key concepts. Relative Levels Other than the centerline, relative rather than absolute levels are used to identify levels of interest. Accordingly, no fixed levels correspond to overbought/oversold conditions. Relative levels of interest are identified using:  • A Donchian channel (historical highs/lows).  • The oscillator's position relative to higher timeframe values.  • Oscillator levels following points in time where a divergence is identified. Higher timeframes Two progressively higher timeframes are used to calculate larger-context values for the oscillator. The rationale underlying the use of timeframes higher than the chart's is that, while they change less frequently than the values calculated at the chart's resolution, they are more meaningful because more work (trader activity) is required to calculate them. Combining the immediacy of values calculated at the chart's resolution to higher timeframe values achieves a compromise between responsiveness and reliability. Divergences as points of interest rather than directional clues A very simple interpretation of what constitutes a divergence is used. A divergence is defined as a discrepancy between any bar's direction and the direction of the signal line on that same bar. No attempt is made to attribute a directional bias to divergences when they occur. Instead, the oscillator's level is saved and subsequent movement of the oscillator relative to the saved level is what determines the bullish/bearish state of the oscillator. Conservative coloring scheme Several additive coloring conditions allow the bull/bear coloring of the oscillator's main line to be restricted to specific areas meeting all the selected conditions. The concept is built on the premise that most of the time, an oscillator's value should be viewed as mere noise, and that somewhat like price, it only occasionally conveys actionable information. █  FEATURES Plots  • Three lines can be plotted. They are named Main line , Line 2 and Line 3 . You decide which calculation to use for each line:    • The oscillator's value at the chart's resolution.    • The oscillator's value at a medium timeframe higher than the chart's resolution.    • The oscillator's value at the highest timeframe.    • An aggregate line calculated using a weighed average of the three previous lines (see the Aggregate Weights section of Inputs to configure the weights).  • The coloring conditions, divergence levels and the Hi/Lo channel always apply to the Main line, whichever calculation you decide to use for it.  • The color of lines 2 and 3 are fixed but can be set in the "Colors" section of Inputs.  • You can change the thickness of each line.  • When the aggregate line is displayed, higher timeframe values are only used in its calculation when they become available in the chart's history,   otherwise the aggregate line would appear much later on the chart. To indicate when each higher timeframe value becomes available,   a small label appears near the centerline.  • Divergences can be shown as small dots on the centerline.  • Divergence levels can be shown. The level and fill are determined by the oscillator's position relative to the last saved divergence level.  • Bull/bear markers can be displayed. They occur whenever a new bull/bear state is determined by the "Main Line Coloring Conditions".  • The Hi/Lo (Donchian) channel can be displayed, and its period defined.  • The background can display the state of any one of 11 different conditions.  • The resolutions used for the higher timeframes can be displayed to the right of the last bar's value.  • Four key values are always displayed in the Data Window (fourth icon down to the right of your chart):   oscillator values for the chart, medium and highest timeframes, and the oscillator's instant value before it is averaged. Main Line Coloring Conditions  • Nine different conditions can be selected to determine the bull/bear coloring of the main line. All conditions set to "ON" must be met to determine the bull/bear state.  • A volatility state can also be used to filter the conditions.  • When the coloring conditions and the filter do not allow for a bull/bear state to be determined, the neutral color is used. Signal  • Seven different averages can be used to calculate the average of the oscillator's value.  • The average's period can be set. A period of one will show the instant value of the oscillator,   provided you don't use linear regression or the Hull MA as they do not work with a period of one.  • An external signal can be used as the oscillator's instant value. If an already averaged external value is used, set the period to one in this indicator.  • For the cases where an external signal is used, a centerline value can be set. Higher Timeframes  • The two higher timeframes are named Medium timeframe and Highest timeframe . They can be determined using one of three methods:   • Auto-steps: the higher timeframes are determined using the chart's resolution. If the chart uses a seconds resolution, for example,    the medium and highest resolutions will be 15 and 60 minutes.   • Multiples: the timeframes are calculated using a multiple of the chart's resolution, which you can set.   • Fixed: the set timeframes do not change with the chart's resolution. Repainting  • Repainting can be controlled separately for the chart's value and the higher timeframe values.  • The default is a repainting chart value and non-repainting higher timeframe values. The Aggregate line will thus repaint by default,   as it uses the chart's value along with the higher timeframes values. Aggregate Weights  • The weight of each component of the Aggregate line can be set.  • The default is equal weights for the three components, meaning that the chart's value accounts for one third of the weight in the Aggregate. High Volatility  • This provides control over the volatility filter used in the Main line's coloring conditions and the background display.  • Volatility is determined to be high when the short-term ATR is greater than the long-term ATR. Colors  • You can define your own colors for all of the oscillator's plots.  • The default colors will perform well on both white and black chart backgrounds. Alerts  • An alert can be defined for the script. The alert will trigger whenever a bull/bear marker appears in the indicator's display.   The particular combination of coloring conditions and the display of bull/bear markers when you create the alert will thus determine when the alert triggers.   Once the alerts are created, subsequent changes to the conditions controlling the display of markers will not affect the existing alert(s).  • You can create multiple alerts from this script, each triggering on different conditions. Backtesting & Trading Engine Signal Line  • An invisible plot named "BTE Signal" is provided. It can be used as an entry signal when connected to the PineCoders Backtesting & Trading Engine as an external input.   It will generate an entry whenever a marker is displayed. █  NOTES • I do not know for sure if the calculations in Efficient Work are original. I apologize if they are not. • Because this version of Efficient Work only has access to OHLC information, it cannot measure the total distance traveled through all of a bar's ticks, but the indicator nonetheless behaves in a manner consistent with the intentions underlying its design. For Pine coders This code was written using the following standards:  • The PineCoders Coding Conventions for Pine .  • A modified version of the PineCoders MTF Oscillator Framework and MTF Selection Framework .
Pine Script® indicator
by LucF
17
MTF Oscillator Framework [PineCoders]This framework allows Pine coders to quickly build a complete multi-timeframe oscillator from any calculation producing values around a centerline, whether the values are bounded or not. Insert your calculation in the script and you have a ready-to-publish MTF Oscillator offering a plethora of presentation options and features. █  HOW TO USE THE FRAMEWORK 1 — Insert your calculation in the `f_signal()` function at the top of the "Helper Functions" section of the script. 2 — Change the script's name in the `study()` declaration statement and the `alertcondition()` text in the last part of the "Plots" section. 3 — Adapt the default value used to initialize the CENTERLINE constant in the script's "Constants" section. 4 — If you want to publish the script, copy/paste the following description in your new publication's description and replace the "OVERVIEW" section with a description of your calculations. 5 — Voilà! ═════════════════════════════════════════════════════════════════════════ █  OVERVIEW This oscillator calculates a directional value of True Range. When a bar is up, the positive value of True Range is used. A negative value is used when the bar is down. When there is no movement during the bar, a zero value is generated, even if True Range is different than zero. Because the unit of measure of True Range is price, the oscillator is unbounded (it does not have fixed upper/lower bounds). True Range can be used as a metric for volatility, but by using a signed value, this oscillator will show the directional bias of progressively increasing/decreasing volatility, which can make it more useful than an always positive value of True Range. The True Range calculation appeared for the first time in J. Welles Wilder's New Concepts in Technical Trading Systems book published in 1978. Wilder's objective was to provide a reliable measure of the effective movement—or range—between two bars, to measure volatility. True Range is also the building block used to calculate ATR (Average True Range), which calculates the average of True Range values over a given period using the `rma` averaging method—the same used in the calculation of another of Wilder's remarkable creations: RSI. █  CONCEPTS This oscillator's design stems from a few key concepts. Relative Levels Other than the centerline, relative rather than absolute levels are used to identify levels of interest. Accordingly, no fixed levels correspond to overbought/oversold conditions. Relative levels of interest are identified using:  • A Donchian channel (historical highs/lows).  • The oscillator's position relative to higher timeframe values.  • Oscillator levels following points in time where a divergence is identified. Higher timeframes Two progressively higher timeframes are used to calculate larger-context values for the oscillator. The rationale underlying the use of timeframes higher than the chart's is that, while they change less frequently than the values calculated at the chart's resolution, they are more meaningful because more work (trader activity) is required to calculate them. Combining the immediacy of values calculated at the chart's resolution to higher timeframe values achieves a compromise between responsiveness and reliability. Divergences as points of interest rather than directional clues A very simple interpretation of what constitutes a divergence is used. A divergence is defined as a discrepancy between any bar's direction and the direction of the signal line on that same bar. No attempt is made to attribute a directional bias to divergences when they occur. Instead, the oscillator's level is saved and subsequent movement of the oscillator relative to the saved level is what determines the bullish/bearish state of the oscillator. Conservative coloring scheme Several additive coloring conditions allow the bull/bear coloring of the oscillator's main line to be restricted to specific areas meeting all the selected conditions. The concept is built on the premise that most of the time, an oscillator's value should be viewed as mere noise, and that somewhat like price, it only occasionally conveys actionable information. █  FEATURES Plots  • Three lines can be plotted. They are named Main line , Line 2 and Line 3 . You decide which calculation to use for each line:    • The oscillator's value at the chart's resolution.    • The oscillator's value at a medium timeframe higher than the chart's resolution.    • The oscillator's value at the highest timeframe.    • An aggregate line calculated using a weighed average of the three previous lines (see the Aggregate Weights section of Inputs to configure the weights).  • The coloring conditions, divergence levels and the Hi/Lo channel always apply to the Main line, whichever calculation you decide to use for it.  • The color of lines 2 and 3 are fixed but can be set in the "Colors" section of Inputs.  • You can change the thickness of each line.  • When the aggregate line is displayed, higher timeframe values are only used in its calculation when they become available in the chart's history,   otherwise the aggregate line would appear much later on the chart. To indicate when each higher timeframe value becomes available,   a small label appears near the centerline.  • Divergences can be shown as small dots on the centerline.  • Divergence levels can be shown. The level and fill are determined by the oscillator's position relative to the last saved divergence level.  • Bull/bear markers can be displayed. They occur whenever a new bull/bear state is determined by the "Main Line Coloring Conditions".  • The Hi/Lo (Donchian) channel can be displayed, and its period defined.  • The background can display the state of any one of 11 different conditions.  • The resolutions used for the higher timeframes can be displayed to the right of the last bar's value.  • Four key values are always displayed in the Data Window (fourth icon down to the right of your chart):   oscillator values for the chart, medium and highest timeframes, and the oscillator's instant value before it is averaged. Main Line Coloring Conditions  • Nine different conditions can be selected to determine the bull/bear coloring of the main line. All conditions set to "ON" must be met to determine the bull/bear state.  • A volatility state can also be used to filter the conditions.  • When the coloring conditions and the filter do not allow for a bull/bear state to be determined, the neutral color is used. Signal  • Seven different averages can be used to calculate the average of the oscillator's value.  • The average's period can be set. A period of one will show the instant value of the oscillator,   provided you don't use linear regression or the Hull MA as they do not work with a period of one.  • An external signal can be used as the oscillator's instant value. If an already averaged external value is used, set the period to one in this indicator.  • For the cases where an external signal is used, a centerline value can be set. Higher Timeframes  • The two higher timeframes are named Medium timeframe and Highest timeframe . They can be determined using one of three methods:   • Auto-steps: the higher timeframes are determined using the chart's resolution. If the chart uses a seconds resolution, for example,    the medium and highest resolutions will be 15 and 60 minutes.   • Multiples: the timeframes are calculated using a multiple of the chart's resolution, which you can set.   • Fixed: the set timeframes do not change with the chart's resolution. Repainting  • Repainting can be controlled separately for the chart's value and the higher timeframe values.  • The default is a repainting chart value and non-repainting higher timeframe values. The Aggregate line will thus repaint by default,   as it uses the chart's value along with the higher timeframes values. Aggregate Weights  • The weight of each component of the Aggregate line can be set.  • The default is equal weights for the three components, meaning that the chart's value accounts for one third of the weight in the Aggregate. High Volatility  • This provides control over the volatility filter used in the Main line's coloring conditions and the background display.  • Volatility is determined to be high when the short-term ATR is greater than the long-term ATR. Colors  • You can define your own colors for all of the oscillator's plots.  • The default colors will perform well on both white and black chart backgrounds. Alerts  • An alert can be defined for the script. The alert will trigger whenever a bull/bear marker appears in the indicator's display.   The particular combination of coloring conditions and the display of bull/bear markers when you create the alert will thus determine when the alert triggers.   Once the alerts are created, subsequent changes to the conditions controlling the display of markers will not affect the existing alert(s).  • You can create multiple alerts from this script, each triggering on different conditions. Backtesting & Trading Engine Signal Line  • An invisible plot named "BTE Signal" is provided. It can be used as an entry signal when connected to the PineCoders Backtesting & Trading Engine as an external input.   It will generate an entry whenever a marker is displayed. Look first. Then leap.
Pine Script® indicator
by PineCoders
17
NR7 Indicator Based on Thomas Bulkowski's TheoriesThis NR7 indicator was built on the concept by Thomas Bulkowski and his ThePatternSite. NR7 is based on high to low price range (true range) that is the smallest of the prior 6 days (7 days total), when one NR7 shows, it means that today's candle body (low to high) is the narrowest of the past 7 days. Then if the current close is higher than the NR7's high, we call it a bullish breakout; and if the current close is lower than the NR7's low, we call it a bearish breakout. Regardless the direction, once the current close price goes above or below the high or low of the NR7 candle, we call it a "breakout" in this strategy. Bulkowski suggested on his website that only gave 7 calendar days (NOT trading days) for the symbol to breakout after NR7 occurs, and if the underlying asset does not breakout within 7 calendar days after one NR7 occurs, we would abandon this NR7 signal and start recounting again. Since most securities/indexes do not trade on the weekends and have no data available, I switched 7 calendar days breakout limit to 5 trading days breakout limit, which will work on most assets. However, if you are trading cryptocurrencies or forex which have data on the weekends, feel free to add 2 more days to finish the NR7 count, all you have to do is to add "Buy6", "Buy7", "Sell6" and "Sell7" under line 11 and line 17, then add the senarioes under those "if" statements. Every "NR7" will show up on the chart with a cross symbol and text next to it, then green arrowups show bullish signals and red arrowdowns show bearish signals. Bulkowski also added a "CPI" index on his NR7 strategy, this indicator does not include that "CPI equation" for simplicity purposes and other time frame tradings other than just weekly signals. Please like and share this script, let me know if any questions, thanks!
Pine Script® indicator
by BoilderRoomColdCaller
[blackcat] L2 Ehlers Adaptive BandPass FilterLevel: 2 Background John F. Ehlers introduced Adaptive BandPass Filter in his "Cycle Analytics for Traders" chapter 11 on 2013. Function Adaptive band-pass filter was designed. It just makes since to tune that filter to the measured dominant cycle to eliminate all the other frequency components that are of no interest. Here, the adaptive band-pass indicator starts with the computation of the dominant cycle using the autocorrelation periodogram approach. One way to make a band-pass filter have a leading phase capability is to tune the filter to a period shorter than the period of the cycle being measured. In this case, the bandwidth of filter is set to 0.3. That is 30 percent of the tuned center period. Therefore, the half bandwidth is 15 percent. We tune the filter to be 10 percent toward the shorter period from the dominant cycle period to provide the phase lead while still having the data of interest be within the filter bandwidth. This provides a phase lead of the dominant cycle to be something on the order of 60 degrees, or one-sixth of a cycle. If the dominant cycle were 18 bars, for example, then the detuning of the filter would produce a 3-bar lead. This leading function is not huge, but it is significant. A convenient trigger line is included in the adaptive band-pass filter to signal the more highly likely buy and sell points. The trigger is compute as 90 percent of the amplitude of the adaptive band-pass filter line and is delayed by one bar. While the line crossings occur after the peak of the band-pass filter, phase lead provides for the generation of a timely signal. Significant trading signals should also include the criteria that the line crossing occur at greater than the +0.7 and less than the −0.7 reference lines. Key Signal DominantCycle --> Dominant Cycle signal Signal --> Adaptive BandPass Filter signal Trigger --> lag version of Adaptive BandPass Filter sinal LeadSignal --> Adaptive BandPass Filter Lead signal Trigger2 --> lag version of Adaptive BandPass Filter Lead sinal Pros and Cons 100% John F. Ehlers definition translation of original work, even variable names are the same. This help readers who would like to use pine to read his book. If you had read his works, then you will be quite familiar with my code style. Remarks The 54th script for Blackcat1402 John F. Ehlers Week publication. Readme In real life, I am a prolific inventor. I have successfully applied for more than 60 international and regional patents in the past 12 years. But in the past two years or so, I have tried to transfer my creativity to the development of trading strategies. Tradingview is the ideal platform for me. I am selecting and contributing some of the hundreds of scripts to publish in Tradingview community. Welcome everyone to interact with me to discuss these interesting pine scripts. The scripts posted are categorized into 5 levels according to my efforts or manhours put into these works. Level 1 : interesting script snippets or distinctive improvement from classic indicators or strategy. Level 1 scripts can usually appear in more complex indicators as a function module or element. Level 2 : composite indicator/strategy. By selecting or combining several independent or dependent functions or sub indicators in proper way, the composite script exhibits a resonance phenomenon which can filter out noise or fake trading signal to enhance trading confidence level. Level 3 : comprehensive indicator/strategy. They are simple trading systems based on my strategies. They are commonly containing several or all of entry signal, close signal, stop loss, take profit, re-entry, risk management, and position sizing techniques. Even some interesting fundamental and mass psychological aspects are incorporated. Level 4 : script snippets or functions that do not disclose source code. Interesting element that can reveal market laws and work as raw material for indicators and strategies. If you find Level 1~2 scripts are helpful, Level 4 is a private version that took me far more efforts to develop. Level 5 : indicator/strategy that do not disclose source code. private version of Level 3 script with my accumulated script processing skills or a large number of custom functions. I had a private function library built in past two years. Level 5 scripts use many of them to achieve private trading strategy.
Pine Script® indicator
by blackcat1402
[blackcat] L2 Ehlers Adaptive CCI 2013Level: 2 Background John F. Ehlers introduced Adaptive CCI 2013 in his "Cycle Analytics for Traders" chapter 11 on 2013. Function The time length to be used for the channel in the calculations is widely varied in the literature. In all cases, the length is rather arbitrarily established to fit the indicator to some preconceived event. It seems to me that it would be better to use one full period of the dominant cycle as the length of data to be used. The adaptive CCI indicator starts with the computation of the dominant cycle using the autocorrelation periodogram approach. The identification of the indicator itself is noted by the comment near the end following the dominant cycle calculation. Since the objective is to use only those frequency components passed by the roofing filter, the variable Filt is used as a data input rather than the average of the high, low, and close as was done by Donald Lambert (Inventor of CCI). Key Signal DominantCycle --> Dominant Cycle signal MyCCI --> Adaptive CCI signal Trigger --> lag version of Adaptive CCI signal Pros and Cons 100% John F. Ehlers definition translation of original work, even variable names are the same. This help readers who would like to use pine to read his book. If you had read his works, then you will be quite familiar with my code style. Remarks The 53th script for Blackcat1402 John F. Ehlers Week publication. Readme In real life, I am a prolific inventor. I have successfully applied for more than 60 international and regional patents in the past 12 years. But in the past two years or so, I have tried to transfer my creativity to the development of trading strategies. Tradingview is the ideal platform for me. I am selecting and contributing some of the hundreds of scripts to publish in Tradingview community. Welcome everyone to interact with me to discuss these interesting pine scripts. The scripts posted are categorized into 5 levels according to my efforts or manhours put into these works. Level 1 : interesting script snippets or distinctive improvement from classic indicators or strategy. Level 1 scripts can usually appear in more complex indicators as a function module or element. Level 2 : composite indicator/strategy. By selecting or combining several independent or dependent functions or sub indicators in proper way, the composite script exhibits a resonance phenomenon which can filter out noise or fake trading signal to enhance trading confidence level. Level 3 : comprehensive indicator/strategy. They are simple trading systems based on my strategies. They are commonly containing several or all of entry signal, close signal, stop loss, take profit, re-entry, risk management, and position sizing techniques. Even some interesting fundamental and mass psychological aspects are incorporated. Level 4 : script snippets or functions that do not disclose source code. Interesting element that can reveal market laws and work as raw material for indicators and strategies. If you find Level 1~2 scripts are helpful, Level 4 is a private version that took me far more efforts to develop. Level 5 : indicator/strategy that do not disclose source code. private version of Level 3 script with my accumulated script processing skills or a large number of custom functions. I had a private function library built in past two years. Level 5 scripts use many of them to achieve private trading strategy.
Pine Script® indicator
by blackcat1402
[blackcat] L2 Ehlers Adaptive RSI 2013Level: 2 Background John F. Ehlers introduced Adaptive RSI 2013 in his "Cycle Analytics for Traders" chapter 11 on 2013. Function The adaptive RSI starts with the computation of the dominant cycle using the autocorrelation periodogram approach. The identification of the RSI indicator itself following the dominant cycle calculation is noted by the comment near the end. Since the objective is to use only those frequency components passed by the roofing filter, the variable Filt is used as a data input rather than closing prices. Rather than independently taking the averages of the numerator and denominator, Dr. Ehlers chose to perform smoothing on the ratio using the SuperSmoother filter. The coefficients for the SuperSmoother filters have previously been computed in the dominant cycle measurement part of the code. Key Signal DominantCycle --> Dominant Cycle signal MyRSI --> Adaptive RSI signal Trigger --> lag version of Adaptive RSI signal Pros and Cons 100% John F. Ehlers definition translation of original work, even variable names are the same. This help readers who would like to use pine to read his book. If you had read his works, then you will be quite familiar with my code style. Remarks The 52th script for Blackcat1402 John F. Ehlers Week publication. Courtesy of @RicardoSantos for RGB functions. Readme In real life, I am a prolific inventor. I have successfully applied for more than 60 international and regional patents in the past 12 years. But in the past two years or so, I have tried to transfer my creativity to the development of trading strategies. Tradingview is the ideal platform for me. I am selecting and contributing some of the hundreds of scripts to publish in Tradingview community. Welcome everyone to interact with me to discuss these interesting pine scripts. The scripts posted are categorized into 5 levels according to my efforts or manhours put into these works. Level 1 : interesting script snippets or distinctive improvement from classic indicators or strategy. Level 1 scripts can usually appear in more complex indicators as a function module or element. Level 2 : composite indicator/strategy. By selecting or combining several independent or dependent functions or sub indicators in proper way, the composite script exhibits a resonance phenomenon which can filter out noise or fake trading signal to enhance trading confidence level. Level 3 : comprehensive indicator/strategy. They are simple trading systems based on my strategies. They are commonly containing several or all of entry signal, close signal, stop loss, take profit, re-entry, risk management, and position sizing techniques. Even some interesting fundamental and mass psychological aspects are incorporated. Level 4 : script snippets or functions that do not disclose source code. Interesting element that can reveal market laws and work as raw material for indicators and strategies. If you find Level 1~2 scripts are helpful, Level 4 is a private version that took me far more efforts to develop. Level 5 : indicator/strategy that do not disclose source code. private version of Level 3 script with my accumulated script processing skills or a large number of custom functions. I had a private function library built in past two years. Level 5 scripts use many of them to achieve private trading strategy.
Pine Script® indicator
by blackcat1402
Triple EMA Scalper low lag stratHi all, This strategy is based on the Amazing scalper for majors with risk management by SoftKill21 The change is in lines 11-20 where the sma's are replaced with Triple ema's to lower the lag. The original author is SoftKill21. His explanation is repeated below: Best suited for 1M time frame and majors currency pairs. Note that I tried it at 3M time frame. Its made of : Ema ( exponential moving average ) , long period 25 Ema ( exponential moving average ) Predictive, long period 50, Ema ( exponential moving average ) Predictive, long period 100 Risk management , risking % of equity per trade using stop loss and take profits levels. Long Entry: When the Ema 25 cross up through the 50 Ema and 100 EMA . and we are in london or new york session( very important the session, imagine if we have only american or european currencies, its best to test it) Short Entry: When the Ema 25 cross down through the 50 Ema and 100 EMA , and we are in london or new york session( very important the session, imagine if we have only american or european currencies, its best to test it) Exit: TargetPrice: 5-10 pips Stop loss: 9-12 pips
Pine Script® strategy
by capam
3
Ichimoku & Supertrend Combined StrategyOne of my mixed approach strategy indicators which include's: - Ichimoku using much faster settings. (ECC-11) - Supertrend Whilst both Supertrend and Ichimoku are quite reliable, they do sometimes provide false signals. By combining both indicators, trading when both agree, it reduces the number of false alerts. Using this indicator is simple. If the lifetime line is green then buy. If red then sell and when black don't trade. So... Green Line - This strategy is in a buy position Red Line - This strategy is in a sell position Black Line - DON'T TRADE The trader's approach is simple, when all indicators are green or red, then take the trade. As soon as one indicator changes, then re-evaluate using your normal process, such as price action, to determine whether to close the trade or continue. There are also some alerts for opening and closing positions. If you wish to make some changes or discuss, please don't hesitate to message me.
Pine Script® indicator
by ForexResearchLabs
6
LBR 3-10 OscillatorThis is a variation of MACD popularised by Linda Bradford Raschke. Instead of the regular MACD settings, the this indicator uses simple moving averages, not exponential moving averages, and a setting of 3 for the fast MA, 10 for the slow MA and 16 for the signal line. The signal line (red) acts as a trend indicator, with crossings of the zero line indicating trend changes, while the MACD line (blue) acts as a short term momentum indicator. Setups: - First cross: This is basically selling or buying at the first pullback after a trend change. Buy or sell after the signal line has crossed the zero line and the MACD crosses the signal line for the first time after the trend change. Use price action to time the entry after the pullback — you don't need to wait for the MACD to cross the signal line again. - Pullback in a trend: The MACD crosses the signal line in the opposite direction of the trend irregardless of when the trend change occurred. Use price action to time the entry. - Divergence: The MACD line shows a pattern diverging form price (e.g. makes higher lows whereas price makes lower lows). This can be an indication of trend reversal or waning. In the indicator's input panel there is an option for showing standard deviation bands (turned off by default). MACD line crossing the standard deviation bands can indicate oversold and overbought conditions. The indicator comes with the following alerts: - First cross downtrend - First cross uptrend - Pullback in downtrend - Pullback in uptrend - Trend change down - Trend change up Sources: lindaraschke.net www.netpicks.com
Pine Script® indicator
by bonfireAlgorithm
22
Relative Strength 4DimensionIn the S&C September 2020 article “Tracking Relative Strength In Four Dimensions”, James Garofallou presents a metric for evaluating a security’s strength relative to 11 major market sectors and over several time periods. All this information is squeezed into a single value. Maybe at cost of losing other important information? In this article we’ll look into how to program such a beast, and how it fares when we use it for rebalancing a stock portfolio. This is a redesigned version for an european point of view. I used 10 index for the comparison. feel free to tip me ;-)
Pine Script® indicator
by IacopoAlberti
Daytrader strategies for major currenciesHello, This technique is for those who want the most simple method that is almost fool-proof. It must be done only during the busiest trading hours, 3 am to 11 am EST. This method doesn't work in sideways markets, only in volatile trending markets. Indicators: Ema 3 MA 20 Awesome Oscillator. Enter Long: when the red 3 EMA has crossed up through the middle band at the same time, the AO should be approaching or crossing it's zero line, going up. Enter Short: when the red 3 EMA has crossed down through the middle band at the same time, the AO should be approaching or crossing it's zero line, going down. In this strategy, both the entry and exit happen only during the london session.
Pine Script® strategy
by SoftKill21
4
Matrix functions - JD///////////////////////////////////////////////////////////////////////////////////////////////////////////////// // The arrays provided in Pinescript are linear 1D strucures that can be seen either as a large vertical stack or // a horizontal row containing a list of values, colors, bools,.. // // With the FUNCTIONS in this script the 1D ARRAY LIST can be CONVERTED INTO A 2D MATRIX form // // /////////////////////////////////////////// /// BASIC INFO ON THE MATRIX STRUCTURE: /// /////////////////////////////////////////// // // The matrix is set up as an 2D structure and is devided in ROWS and COLUMNS. // following the standard mathematical notation: // // a 3 x 4 matrix = 4 columns // 0 1 2 3 column index // 0 // 3 rows 1 // 2 // row // index // // With the use of some purpose-built functions, values can be placed or retrieved in a specific column of a certain row // this can be done by intuitively using row_nr and column_nr coördinates, // without having to worry on what exact index of the Pine array this value is located (the functions do these conversions for you) // // // the syntax I propose for the 2D Matrix array has the following structure: // // - the array starts with 2 VALUES describing the DIMENSION INFORMATION, (rows, columns) // these are ignored in the actual calculations and serve as a metadata header (similar to the "location, time,... etc." data that is stored in photo files) // so the array always carries it's own info about the nr. of rows and columns and doesn't need is seperate "info" file! // // To stay consistent with the standard Pinescript (array and ) indexing: // - indexes for sheets and columns start from 0 (first) and run up to the (total nr of sheets or columns) - 1 // - indexes for rows also start from 0 (most recent, cfr. ) and run up to the (total nr of rows) - 1 // // - this 2 value metadata header is followed by the actual df data // the actual data array can consist of (100,000 - 2) usable items, // // In a theoretical example, you can have a matrix with almost 20,000 rows with each 5 columns of data (eg. open, high, low, close, volume) in it!!! // // /////////////////////////////////// /// SCHEMATIC OF THE STRUCTURE: /// /////////////////////////////////// // ////// (metadata header with dimensions info) // // (0) (1) (array index) //
Pine Script® indicator
by Duyck
28
The Lazy Trader - Index (ETF) Trend Following Robot50/150 moving average, index (ETF) trend following robot. Coded for people who cannot psychologically handle dollar-cost-averaging through bear markets and extreme drawdowns (although DCA can produce better results eventually), this robot helps you to avoid bear markets. Be a fair-weathered friend of Mr Market, and only take up his offer when the sun is shining! Designed for the lazy trader who really doesn't care... Recommended Chart Settings: Asset Class: ETF Time Frame: Daily Necessary ETF Macro Conditions: a) Country must have healthy demographics, good ratio of young > old b) Country population must be increasing c) Country must be experiencing price-inflation Default Robot Settings: Slow Moving Average: 50 (integer) //adjust to suit your underlying index Fast Moving Average: 150 (integer) //adjust to suit your underlying index Bullish Slope Angle: 5 (degrees) //up angle of moving averages Bearish Slope Angle: -5 (degrees) //down angle of moving averages Average True Range: 14 (integer) //input for slope-angle formula Risk: 100 (%) //100% risk means using all equity per trade ETF Test Results (Default Settings): SPY (1993 to 2020, 27 years), 332% profit, 20 trades, 6.4 profit factor, 7% drawdown EWG (1996 to 2020, 24 years), 310% profit, 18 trades, 3.7 profit factor, 10% drawdown EWH (1996 to 2020, 24 years), 4% loss, 26 trades, 0.9 profit factor, 36% drawdown QQQ (1999 to 2020, 21 years), 232% profit, 17 trades, 3.6 profit factor, 2% drawdown EEM (2003 to 2020, 17 years), 73% profit, 17 trades, 1.1 profit factor, 3% drawdown GXC (2007 to 2020, 13 years), 18% profit, 14 trades, 1.3 profit factor, 26% drawdown BKF (2009 to 2020, 11 years), 11% profit, 13 trades, 1.2 profit factor, 33% drawdown A longer time in the markets is better, with the exception of EWH. 6 out of 7 tested ETFs were profitable, feel free to test on your favourite ETF (default settings) and comment below. Risk Warning: Not tested on commodities nor other financial products like currencies (code will not work), feel free to leave comments below. Moving Average Slope Angle Formula: Reproduced and modified from source:
Pine Script® strategy
by UnknownUnicorn1373033
3
Price breaksThis indicator displays the High/Low/Close of the previous day/week/month as horizontal lines. Of course, everything is configurable but to keep it simple and non-intrusive it only displays: month's H/L/C levels on D time frame (drawn as circles) week's levels on 4h (as crosses) day's levels on 1h (as line) These levels act as support / resistance over and over again, see current (08/24/2020) BTCUSD chart, the previous month's close (blue circles) did act as support and held on 08/11, also prev month's high (red circles) was not broken on 08/21. Once these levels break we might see lower prices but so far both of them act as good support to consider.
Pine Script® indicator
by icostan
4
CustomScreenerTo apply your indicator with screener , please modify the section which i mention "Start your indicator pine script" & "End your indicator pine script" At the pinescript section you will able to change the ticket symbol . I only able to show screener result with 10 item in 1 times . To view more result, please go to setting and change stock list "1-10">"11,20">"21-30"..... Able to screener 100 items with this indicator. Kindly change the exchange and stock in the pinescript according your watchlist. As examples, my indicator is to determine the stock in which trend, i want to find out all stock with aqua color trend The screener result show only 9 of 10 are in aqua color trend.
Pine Script® indicator
by TraderX_Unknown
37
Elder-Keltner-Impulse-MA Study by STTAStudy Name: Elder-Keltner-Impulse-MA Study by STTA English: This indicator shows in a combined way three Keltner Channels with EMA21 and multiplier 1,3,5, the Elder Impulse System and a short EMA 11 to recognize the valuation zone, according to various strategies of Dr. Alexander Elder. This indicator can be applied on all symbols. Inputs: displayed symbol Settings: Elder Force Index (EFI) -EIF MACD Length -EIF MACD Slow Length -EIF MACD Signal Length -EIF EMA Length EMA Short Length Keltner Channels (KC) -KC MA Length -KC Multiplier1-3 -KC Source -KC Type -KC Bands Style Outputs: -EIF Bar Colors -KC Upper1-3 channel upper and lower Lines -MA Short
Pine Script® indicator
by Trading-Software-Consulting
1