Get started

Timeframe

Intelligent Support & Resistance Lines (MTF)This script automatically detects and updates key Support & Resistance (S/R) levels using a higher timeframe (MTF) approach. By leveraging volume confirmation, levels are only identified when significant volume (relative to the SMA of volume) appears. Each level is drawn horizontally in real time, and whenever the market breaks above a resistance level (and retests it), the script automatically converts that resistance into support. The opposite occurs if the market breaks below a support level. Key Features: Multi-Timeframe (MTF) Data Select a higher timeframe for more robust S/R calculations. The script fetches High, Low, Volume, and SMA of Volume from the chosen timeframe. Automatic Role Reversal Resistance becomes Support if a breakout retest occurs. Support becomes Resistance if a breakdown retest occurs. Dynamic Line Width & Labeling Each S/R line’s thickness increases with additional touches, making frequently tested levels easier to spot. Labels automatically display the number of touches (e.g., “R 3” or “S 2”) and can have adjustable text size. Volume Threshold Only significant pivots (where volume exceeds a specified multiplier of average volume) are plotted, reducing noise. Horizontal Offset for Clarity Lines are drawn with timestamps instead of bar_index, ensuring that old levels remain visible without chart limitations. Adjustable Maximum Levels Maintain a clean chart by limiting how many S/R lines remain at once. How It Works: Pivot Detection: The script identifies swing highs and lows from the higher timeframe (timeframeSR). Volume Check: Only pivots with volume ≥ (SMA Volume * volumeThreshold) qualify. Line Creation & Updates: New lines are drawn at these pivots, labeled “R #” or “S #,” indicating how many times they’ve been touched. Role Reversal: If price breaks above a resistance and retests it from above, that line is removed from the resistance array and re-created in the support array (and vice versa). Inputs: Timeframe for S/R: Choose the higher timeframe for S/R calculations. Swing Length: Number of bars to consider in a pivot calculation. Minimum Touches: Minimum required touches before drawing or updating a level. Volume Threshold (Multiplier): Determines how much volume (relative to SMA) is needed to confirm a pivot. Maximum Number of Levels: Caps how many S/R lines can be shown at once. Color for Resistance & Color for Support: Customize your preferred colors for lines and labels. Label Size: Select from "tiny", "small", "normal", "large", or "huge" to resize the labels. Disclaimer: This script is intended for educational purposes and should not be interpreted as financial or investment advice. Always conduct your own research or consult a qualified professional before making trading decisions.
Pine Script™ indicator
by Jonny86FXPro
2
High/Mid/Low of the Previous Month, Week and Day + MAIntroducing the Ultimate Price Action Indicator Take your trading to the next level with this feature-packed indicators. Designed to provide key price insights, this tool offers: - Monthly, Weekly, and Daily Levels : Displays the High, Midpoint, and Low of the previous month, week, and day. - Logarithmic Price Lines : Option to plot price levels logarithmically for enhanced accuracy. - Customizable Labels : Display labels on price lines for better clarity. (This feature is optional.) - Dual Moving Averages : Add two customizable Moving Averages (Simple, Exponential, or Weighted) directly on the price chart. (This feature is optional.) This code combines features from the Moving Average Exponential and Daily Weekly Monthly Highs & Lows (sbtnc) indicators, with custom modifications to implement unique personal ideas. Perfect for traders who want to combine precision with simplicity. Whether you're analyzing historical levels or integrating moving averages into your strategy, this indicator provides everything you need for informed decision-making. To prevent change chart scale, right click on Price Scale and enable "Scale price chart only"
Pine Script™ indicator
by soltanifx
2
Multi-Timeframe Stochastic Alert [tradeviZion]# Multi-Timeframe Stochastic Alert : Complete User Guide ## 1. Introduction ### What is the Multi-Timeframe Stochastic Alert? The Multi-Timeframe Stochastic Alert is an advanced technical analysis tool that helps traders identify potential trading opportunities by analyzing momentum across multiple timeframes. It combines the power of the stochastic oscillator with multi-timeframe analysis to provide more reliable trading signals. ### Key Features and Benefits - Simultaneous analysis of 6 different timeframes - Advanced alert system with customizable conditions - Real-time visual feedback with color-coded signals - Comprehensive data table with instant market insights - Motivational trading messages for psychological support - Flexible theme support for comfortable viewing ### How it Can Help Your Trading - Identify stronger trends by confirming momentum across multiple timeframes - Reduce false signals through multi-timeframe confirmation - Stay informed of market changes with customizable alerts - Make more informed decisions with comprehensive market data - Maintain trading discipline with clear visual signals ## 2. Understanding the Display ### The Stochastic Chart The main chart displays three key components: 1. ** K-Line (Fast) **: The primary stochastic line (default color: green) 2. ** D-Line (Slow) **: The signal line (default color: red) 3. ** Reference Lines **: - Overbought Level (80): Upper dashed line - Middle Line (50): Center dashed line - Oversold Level (20): Lower dashed line ### The Information Table The table provides a comprehensive view of stochastic readings across all timeframes. Here's what each column means: #### Column Explanations: 1. ** Timeframe ** - Shows the time period for each row - Example: "5" = 5 minutes, "15" = 15 minutes, etc. 2. ** K Value ** - The fast stochastic line value (0-100) - Higher values indicate stronger upward momentum - Lower values indicate stronger downward momentum 3. ** D Value ** - The slow stochastic line value (0-100) - Helps confirm momentum direction - Crossovers with K-line can signal potential trades 4. ** Status ** - Shows current momentum with symbols: - ▲ = Increasing (bullish) - ▼ = Decreasing (bearish) - Color matches the trend direction 5. ** Trend ** - Shows the current market condition: - "Overbought" (above 80) - "Bullish" (above 50) - "Bearish" (below 50) - "Oversold" (below 20) #### Row Explanations: 1. ** Title Row ** - Shows "🎯 Multi-Timeframe Stochastic" - Indicates the indicator is active 2. ** Header Row ** - Contains column titles - Dark blue background for easy reading 3. ** Timeframe Rows ** - Six rows showing different timeframe analyses - Each row updates independently - Color-coded for easy trend identification 4. **Message Row** - Shows rotating motivational messages - Updates every 5 bars - Helps maintain trading discipline ### Visual Indicators and Colors - ** Green Background **: Indicates bullish conditions - ** Red Background **: Indicates bearish conditions - ** Color Intensity **: Shows strength of the signal - ** Background Highlights **: Appear when alert conditions are met ## 3. Core Settings Groups ### Stochastic Settings These settings control the core calculation of the stochastic oscillator. 1. ** Length (Default: 14) ** - What it does: Determines the lookback period for calculations - Higher values (e.g., 21): More stable, fewer signals - Lower values (e.g., 8): More sensitive, more signals - Recommended: * Day Trading: 8-14 * Swing Trading: 14-21 * Position Trading: 21-30 2. ** Smooth K (Default: 3) ** - What it does: Smooths the main stochastic line - Higher values: Smoother line, fewer false signals - Lower values: More responsive, but more noise - Recommended: * Day Trading: 2-3 * Swing Trading: 3-5 * Position Trading: 5-7 3. ** Smooth D (Default: 3) ** - What it does: Smooths the signal line - Works in conjunction with Smooth K - Usually kept equal to or slightly higher than Smooth K - Recommended: Keep same as Smooth K for consistency 4. ** Source (Default: Close) ** - What it does: Determines price data for calculations - Options: Close, Open, High, Low, HL2, HLC3, OHLC4 - Recommended: Stick with Close for most reliable signals ### Timeframe Settings Controls the multiple timeframes analyzed by the indicator. 1. ** Main Timeframes (TF1-TF6) ** - TF1 (Default: 10): Shortest timeframe for quick signals - TF2 (Default: 15): Short-term trend confirmation - TF3 (Default: 30): Medium-term trend analysis - TF4 (Default: 30): Additional medium-term confirmation - TF5 (Default: 60): Longer-term trend analysis - TF6 (Default: 240): Major trend confirmation Recommended Combinations: * Scalping: 1, 3, 5, 15, 30, 60 * Day Trading: 5, 15, 30, 60, 240, D * Swing Trading: 15, 60, 240, D, W, M 2. ** Wait for Bar Close (Default: true) ** - What it does: Controls when calculations update - True: More reliable but slightly delayed signals - False: Faster signals but may change before bar closes - Recommended: Keep True for more reliable signals ### Alert Settings #### Main Alert Settings 1. ** Enable Alerts (Default: true) ** - Master switch for all alert notifications - Toggle this off when you don't want any alerts - Useful during testing or when you want to focus on visual signals only 2. ** Alert Condition (Options) ** - "Above Middle": Bullish momentum alerts only - "Below Middle": Bearish momentum alerts only - "Both": Alerts for both directions - Recommended: * Trending Markets: Choose direction matching the trend * Ranging Markets: Use "Both" to catch reversals * New Traders: Start with "Both" until you develop a specific strategy 3. ** Alert Frequency ** - "Once Per Bar": Immediate alerts during the bar - "Once Per Bar Close": Alerts only after bar closes - Recommended: * Day Trading: "Once Per Bar" for quick reactions * Swing Trading: "Once Per Bar Close" for confirmed signals * Beginners: "Once Per Bar Close" to reduce false signals #### Timeframe Check Settings 1. ** First Check (TF1) ** - Purpose: Confirms basic trend direction - Alert Triggers When: * For Bullish: Stochastic is above middle line (50) * For Bearish: Stochastic is below middle line (50) * For Both: Triggers in either direction based on position relative to middle line - Settings: * Enable/Disable: Turn first check on/off * Timeframe: Default 5 minutes - Best Used For: * Quick trend confirmation * Entry timing * Scalping setups 2. ** Second Check (TF2) ** - Purpose: Confirms both position and momentum - Alert Triggers When: * For Bullish: Stochastic is above middle line AND both K&D lines are increasing * For Bearish: Stochastic is below middle line AND both K&D lines are decreasing * For Both: Triggers based on position and direction matching current condition - Settings: * Enable/Disable: Turn second check on/off * Timeframe: Default 15 minutes - Best Used For: * Trend strength confirmation * Avoiding false breakouts * Day trading setups 3. ** Third Check (TF3) ** - Purpose: Confirms overall momentum direction - Alert Triggers When: * For Bullish: Both K&D lines are increasing (momentum confirmation) * For Bearish: Both K&D lines are decreasing (momentum confirmation) * For Both: Triggers based on matching momentum direction - Settings: * Enable/Disable: Turn third check on/off * Timeframe: Default 30 minutes - Best Used For: * Major trend confirmation * Swing trading setups * Avoiding trades against the main trend Note: All three conditions must be met simultaneously for the alert to trigger. This multi-timeframe confirmation helps reduce false signals and provides stronger trade setups. #### Alert Combinations Examples 1. ** Conservative Setup ** - Enable all three checks - Use "Once Per Bar Close" - Timeframe Selection Example: * First Check: 15 minutes * Second Check: 1 hour (60 minutes) * Third Check: 4 hours (240 minutes) - Wider gaps between timeframes reduce noise and false signals - Best for: Swing trading, beginners 2. ** Aggressive Setup ** - Enable first two checks only - Use "Once Per Bar" - Timeframe Selection Example: * First Check: 5 minutes * Second Check: 15 minutes - Closer timeframes for quicker signals - Best for: Day trading, experienced traders 3. ** Balanced Setup ** - Enable all checks - Use "Once Per Bar" - Timeframe Selection Example: * First Check: 5 minutes * Second Check: 15 minutes * Third Check: 1 hour (60 minutes) - Balanced spacing between timeframes - Best for: All-around trading ### Visual Settings #### Alert Visual Settings 1. ** Show Background Color (Default: true) ** - What it does: Highlights chart background when alerts trigger - Benefits: * Makes signals more visible * Helps spot opportunities quickly * Provides visual confirmation of alerts - When to disable: * If using multiple indicators * When preferring a cleaner chart * During manual backtesting 2. ** Background Transparency (Default: 90) ** - Range: 0 (solid) to 100 (invisible) - Recommended Settings: * Clean Charts: 90-95 * Multiple Indicators: 85-90 * Single Indicator: 80-85 - Tip: Adjust based on your chart's overall visibility 3. ** Background Colors ** - Bullish Background: * Default: Green * Indicates upward momentum * Customizable to match your theme - Bearish Background: * Default: Red * Indicates downward momentum * Customizable to match your theme #### Level Settings 1. ** Oversold Level (Default: 20) ** - Traditional Setting: 20 - Adjustable Range: 0-100 - Usage: * Lower values (e.g., 10): More conservative * Higher values (e.g., 30): More aggressive - Trading Applications: * Potential bullish reversal zone * Support level in uptrends * Entry point for long positions 2. ** Overbought Level (Default: 80) ** - Traditional Setting: 80 - Adjustable Range: 0-100 - Usage: * Lower values (e.g., 70): More aggressive * Higher values (e.g., 90): More conservative - Trading Applications: * Potential bearish reversal zone * Resistance level in downtrends * Exit point for long positions 3. ** Middle Line (Default: 50) ** - Purpose: Trend direction separator - Applications: * Above 50: Bullish territory * Below 50: Bearish territory * Crossing 50: Potential trend change - Trading Uses: * Trend confirmation * Entry/exit trigger * Risk management level #### Color Settings 1. ** Bullish Color (Default: Green) ** - Used for: * K-Line (Main stochastic line) * Status symbols when trending up * Trend labels for bullish conditions - Customization: * Choose colors that stand out * Match your trading platform theme * Consider color blindness accessibility 2. ** Bearish Color (Default: Red) ** - Used for: * D-Line (Signal line) * Status symbols when trending down * Trend labels for bearish conditions - Customization: * Choose contrasting colors * Ensure visibility on your chart * Consider monitor settings 3. ** Neutral Color (Default: Gray) ** - Used for: * Middle line (50 level) - Customization: * Should be less prominent * Easy on the eyes * Good background contrast ### Theme Settings 1. **Color Theme Options** - Dark Theme (Default): * Dark background with white text * Optimized for dark chart backgrounds * Reduces eye strain in low light - Light Theme: * Light background with black text * Better visibility in bright conditions - Custom Theme: * Use your own color preferences 2. ** Available Theme Colors ** - Table Background - Table Text - Table Headers Note: The theme affects only the table display colors. The stochastic lines and alert backgrounds use their own color settings. ### Table Settings #### Position and Size 1. ** Table Position ** - Options: * Top Right (Default) * Middle Right * Bottom Right * Top Left * Middle Left * Bottom Left - Considerations: * Chart space utilization * Personal preference * Multiple monitor setups 2. ** Text Sizes ** - Title Size Options: * Tiny: Minimal space usage * Small: Compact but readable * Normal (Default): Standard visibility * Large: Enhanced readability * Huge: Maximum visibility - Data Size Options: * Recommended: One size smaller than title * Adjust based on screen resolution * Consider viewing distance 3. ** Empowering Messages ** - Purpose: * Maintain trading discipline * Provide psychological support * Remind of best practices - Rotation: * Changes every 5 bars * Categories include: - Market Wisdom - Strategy & Discipline - Mindset & Growth - Technical Mastery - Market Philosophy ## 4. Setting Up for Different Trading Styles ### Day Trading Setup 1. **Timeframes** - Primary: 5, 15, 30 minutes - Secondary: 1H, 4H - Alert Settings: "Once Per Bar" 2. ** Stochastic Settings ** - Length: 8-14 - Smooth K/D: 2-3 - Alert Condition: Match market trend 3. ** Visual Settings ** - Background: Enabled - Transparency: 85-90 - Theme: Based on trading hours ### Swing Trading Setup 1. ** Timeframes ** - Primary: 1H, 4H, Daily - Secondary: Weekly - Alert Settings: "Once Per Bar Close" 2. ** Stochastic Settings ** - Length: 14-21 - Smooth K/D: 3-5 - Alert Condition: "Both" 3. ** Visual Settings ** - Background: Optional - Transparency: 90-95 - Theme: Personal preference ### Position Trading Setup 1. ** Timeframes ** - Primary: Daily, Weekly - Secondary: Monthly - Alert Settings: "Once Per Bar Close" 2. ** Stochastic Settings ** - Length: 21-30 - Smooth K/D: 5-7 - Alert Condition: "Both" 3. ** Visual Settings ** - Background: Disabled - Focus on table data - Theme: High contrast ## 5. Troubleshooting Guide ### Common Issues and Solutions 1. ** Too Many Alerts ** - Cause: Settings too sensitive - Solutions: * Increase timeframe intervals * Use "Once Per Bar Close" * Enable fewer timeframe checks * Adjust stochastic length higher 2. ** Missed Signals ** - Cause: Settings too conservative - Solutions: * Decrease timeframe intervals * Use "Once Per Bar" * Enable more timeframe checks * Adjust stochastic length lower 3. ** False Signals ** - Cause: Insufficient confirmation - Solutions: * Enable all three timeframe checks * Use larger timeframe gaps * Wait for bar close * Confirm with price action 4. ** Visual Clarity Issues ** - Cause: Poor contrast or overlap - Solutions: * Adjust transparency * Change theme settings * Reposition table * Modify color scheme ### Best Practices 1. ** Getting Started ** - Start with default settings - Use "Both" alert condition - Enable all timeframe checks - Wait for bar close - Monitor for a few days 2. ** Fine-Tuning ** - Adjust one setting at a time - Document changes and results - Test in different market conditions - Find your optimal timeframe combination - Balance sensitivity with reliability 3. ** Risk Management ** - Don't trade against major trends - Confirm signals with price action - Use appropriate position sizing - Set clear stop losses - Follow your trading plan 4. ** Regular Maintenance ** - Review settings weekly - Adjust for market conditions - Update color scheme for visibility - Clean up chart regularly - Maintain trading journal ## 6. Tips for Success 1. ** Entry Strategies ** - Wait for all timeframes to align - Confirm with price action - Use proper position sizing - Consider market conditions 2. ** Exit Strategies ** - Trail stops using indicator levels - Take partial profits at targets - Honor your stop losses - Don't fight the trend 3. ** Psychology ** - Stay disciplined with settings - Don't override system signals - Keep emotions in check - Learn from each trade 4. ** Continuous Improvement ** - Record your trades - Review performance regularly - Adjust settings gradually - Stay educated on markets
Pine Script™ indicator
by TradeVizion
4
Harmonic Pattern Detector (75 patterns)Harmonic Pattern Detector offers a record amount of "Harmonic Patterns" in one script, with 75 different patterns detected, together with up to 99 different swing lengths. 🔶 USAGE Harmonic Patterns are detected from several different ZigZag lines, derived from Swings with different lengths (shorter - longer term) Depending on the settings ' Minimum/Maximum Swing Length ', the user will see more or less patterns from shorter and/or longer-term swing points. 🔹 Fibonacci Ratio Certain patterns have only one ratio for a specific retrace/extension instead of one upper and one lower limit. In this case, we add a ' Tolerance ', which adds a percentage tolerance below/above the ratio, creating two limits. A higher number may show more patterns but may become less valid. Hoovering over points B, C, and D will show a tooltip with the concerning limits; adjusted limits will be seen if applicable. Tooltips in settings will also show which patterns the Fibonacci Ratio applies to. 🔹 Triangle Area Ratio Using Heron's formula , the triangle area is calculated after the X-Y axis is normalized. Users can filter patterns based on the ratio of the smallest triangle to the largest triangle. A lower Triangle Area Ratio number leads to more symmetrical patterns but may appear less frequently. 🔶 DETAILS Harmonic patterns are based on geometric patterns, where the retracement/extension of a swing point must be located between specific Fibonacci ratios of the previous swing/leg. Different Harmonic Patterns require unique ratios to become valid patterns. In the above example there is a valid 'Max Butterfly' pattern where: Point B is located between 0.618 - 0.886 retracement level of the X-A leg Point C is located between 0.382 - 0.886 retracement level of the A-B leg Point D is located between 1.272 - 2.618 extension level of the B-C leg Point D is located between 1.272 - 1.618 extension level of the X-A leg Harmonic Pattern Detector uses ZigZag lines, where swing highs and swing lows alternate. Each ZigZag line is checked for valid Harmonic Patterns . When multiple types of Harmonic Patterns are valid for the same sequence, the pattern will be named after the first one found. Different swing lengths form different ZigZag lines. By evaluating different ZigZag lines (up to 99!), shorter—and longer-term patterns can be drawn on the same chart. 🔹 Blocks The patterns are organized into blocks that can be toggled on or off with a single click. When a block is enabled, the user can still select which specific patterns within that block are enabled or disabled. 🔹 Visuals Besides color settings, labels can show pattern names or arrows at point D of the pattern. Note this will happen 1 bar after validation because one extra bar is needed for confirmation. An option is included to show only arrows without the patterns. 🔹 Updated Patterns When a Swing Low is followed by a lower low or a Swing High followed by a higher high , triggering a pattern identical to a previous one except with a different point D, the pattern will be updated. The previous C-D line will be visible as a dashed line to highlight the event. Only the last dashed line is shown when this happens more than once. 🔹 Optimization The script only verifies the last leg in the initial phase, significantly reducing the time spent on pattern validation. If this leg doesn't align with a potential  Harmonic Pattern , the pattern is immediately disregarded. In the subsequent phase, the remaining patterns are quickly scrutinized to ensure the next leg is valid. This efficient process continues, with only valid patterns progressing to the next phase until all sequences have been thoroughly examined. This process can check up to 99 ZigZag lines for 75 different Harmonic Patterns , showcasing its high capacity and versatility. 🔹 Ratios The following table shows the different ratios used for each Harmonic Pattern . ' min ' and ' max ' are used when only one limit is provided instead of 2. This limit is given a percentage tolerance above and below, customizable by the setting ' Tolerance - Fibonacci Ratio '. For example a ratio of 0.618 with a tolerance of 1% would result in: an upper limit of 0.624 a lower limit of 0.612 |-------------------|------------------------|------------------------|-----------------------|-----------------------| | NAME PATTERN | BCD (BD) | ABC (AC) | XAB (XB) | XAD (XD) | | | min max | min max | min max | min max | |-------------------|------------------------|------------------------|-----------------------|-----------------------| | 'ABCD' | 1.272 - 1.618 | 0.618 - 0.786 | | | | '5-0' | 0.5 *min - 0.5 *max | 1.618 - 2.24 | 1.13 - 1.618 | | | 'Max Gartley' | 1.128 - 2.236 | 0.382 - 0.886 | 0.382 - 0.618 | 0.618 - 0.786 | | 'Gartley' | 1.272 - 1.618 | 0.382 - 0.886 | 0.618*min - 0.618*max | 0.786*min - 0.786*max | | 'A Gartley' | 1.618*min - 1.618*max | 1.128 - 2.618 | 0.618 - 0.786 | 1.272*min - 1.272*max | | 'NN Gartley' | 1.128 - 1.618 | 0.382 - 0.886 | 0.618*min - 0.618*max | 0.786*min - 0.786*max | | 'NN A Gartley' | 1.618*min - 1.618*max | 1.128 - 2.618 | 0.618 - 0.786 | 1.272*min - 1.272*max | | 'Bat' | 1.618 - 2.618 | 0.382 - 0.886 | 0.382 - 0.5 | 0.886*min - 0.886*max | | 'Alt Bat' | 2.0 - 3.618 | 0.382 - 0.886 | 0.382*min - 0.382*max | 1.128*min - 1.128*max | | 'A Bat' | 2.0 - 2.618 | 1.128 - 2.618 | 0.382 - 0.618 | 1.128*min - 1.128*max | | 'Max Bat' | 1.272 - 2.618 | 0.382 - 0.886 | 0.382 - 0.618 | 0.886*min - 0.886*max | | 'NN Bat' | 1.618 - 2.618 | 0.382 - 0.886 | 0.382 - 0.5 | 0.886*min - 0.886*max | | 'NN Alt Bat' | 2.0 - 4.236 | 0.382 - 0.886 | 0.382*min - 0.382*max | 1.128*min - 1.128*max | | 'NN A Bat' | 2.0 - 2.618 | 1.128 - 2.618 | 0.382 - 0.618 | 1.128*min - 1.128*max | | 'NN A Alt Bat' | 2.618*min - 2.618*max | 1.128 - 2.618 | 0.236 - 0.5 | 0.886*min - 0.886*max | | 'Butterfly' | 1.618 - 2.618 | 0.382 - 0.886 | 0.786*min - 0.786*max | 1.272 - 1.618 | | 'Max Butterfly' | 1.272 - 2.618 | 0.382 - 0.886 | 0.618 - 0.886 | 1.272 - 1.618 | | 'Butterfly 113' | 1.128 - 1.618 | 0.618 - 1.0 | 0.786 - 1.0 | 1.128*min - 1.128*max | | 'A Butterfly' | 1.272*min - 1.272*max | 1.128 - 2.618 | 0.382 - 0.618 | 0.618 - 0.786 | | 'Crab' | 2.24 - 3.618 | 0.382 - 0.886 | 0.382 - 0.618 | 1.618*min - 1.618*max | | 'Deep Crab' | 2.618 - 3.618 | 0.382 - 0.886 | 0.886*min - 0.886*max | 1.618*min - 1.618*max | | 'A Crab' | 1.618 - 2.618 | 1.128 - 2.618 | 0.276 - 0.446 | 0.618*min - 0.618*max | | 'NN Crab' | 2.236 - 4.236 | 0.382 - 0.886 | 0.382 - 0.618 | 1.618*min - 1.618*max | | 'NN Deep Crab' | 2.618 - 4.236 | 0.382 - 0.886 | 0.886*min - 0.886*max | 1.618*min - 1.618*max | | 'NN A Crab' | 1.128 - 2.618 | 1.128 - 2.618 | 0.236 - 0.447 | 0.618*min - 0.618*max | | 'NN A Deep Crab' | 1.128*min - 1.128*max | 1.128 - 2.618 | 0.236 - 0.382 | 0.618*min - 0.618*max | | 'Cypher' | 1.272 - 2.00 | 1.13 - 1.414 | 0.382 - 0.618 | 0.786*min - 0.786*max | | 'New Cypher' | 1.272 - 2.00 | 1.414 - 2.14 | 0.382 - 0.618 | 0.786*min - 0.786*max | | 'Anti New Cypher' | 1.618 - 2.618 | 0.467 - 0.707 | 0.5 - 0.786 | 1.272*min - 1.272*max | | 'Shark 1' | 1.618 - 2.236 | 1.128 - 1.618 | 0.382 - 0.618 | 0.886*min - 0.886*max | | 'Shark 1 Alt' | 1.618 - 2.618 | 0.618 - 0.886 | 0.446 - 0.618 | 1.128*min - 1.128*max | | 'Shark 2' | 1.618 - 2.236 | 1.128 - 1.618 | 0.382 - 0.618 | 1.128*min - 1.128*max | | 'Shark 2 Alt' | 1.618 - 2.618 | 0.618 - 0.886 | 0.446 - 0.618 | 0.886*min - 0.886*max | | 'Leonardo' | 1.128 - 2.618 | 0.382 - 0.886 | 0.5*min - 0.5*max | 0.786*min - 0.786*max | | 'NN A Leonardo' | 2.0*min - 2.0*max | 1.128 - 2.618 | 0.382 - 0.886 | 1.272*min - 1.272*max | | 'Nen Star' | 1.272 - 2.0 | 1.414 - 2.14 | 0.382 - 0.618 | 1.272*min - 1.272*max | | 'Anti Nen Star' | 1.618 - 2.618 | 0.467 - 0.707 | 0.5 - 0.786 | 0.786*min - 0.786*max | | '3 Drives' | 1.272 - 1.618 | 0.618 - 0.786 | 1.272 - 1.618 | 1.618 - 2.618 | | 'A 3 Drives' | 0.618 - 0.786 | 1.272 - 1.618 | 0.618 - 0.786 | 0.13 - 0.886 | | '121' | 0.382 - 0.786 | 1.128 - 3.618 | 0.5 - 0.786 | 0.382 - 0.786 | | 'A 121' | 1.272 - 2.0 | 0.5 - 0.786 | 1.272 - 2.0 | 1.272 - 2.618 | | '121 BG' | 0.618 - 0.707 | 1.128 - 1.733 | 0.5 - 0.577 | 0.447 - 0.786 | | 'Black Swan' | 1.128 - 2.0 | 0.236 - 0.5 | 1.382 - 2.618 | 1.128 - 2.618 | | 'White Swan' | 0.5 - 0.886 | 2.0 - 4.237 | 0.382 - 0.786 | 0.238 - 0.886 | | 'NN White Swan' | 0.5 - 0.886 | 2.0 - 4.236 | 0.382 - 0.724 | 0.382 - 0.886 | | 'Sea Pony' | 1.618 - 2.618 | 0.382 - 0.5 | 0.128 - 3.618 | 0.618 - 3.618 | | 'Navarro 200' | 0.886 - 3.618 | 0.886 - 1.128 | 0.382 - 0.786 | 0.886 - 1.128 | | 'May-00' | 0.5 - 0.618 | 1.618 - 2.236 | 1.128 - 1.618 | 0.5 - 0.618 | | 'SNORM' | 0.9 - 1.1 | 0.9 - 1.1 | 0.9 - 1.1 | 0.618 - 1.618 | | 'COL Poruchik' | 1.0 *min - 1.0 *max | 0.382 - 2.618 | 0.128 - 3.618 | 0.618 - 3.618 | | 'Henry – David' | 0.618 - 0.886 | 0.44 - 0.618 | 0.128 - 2.0 | 0.618 - 1.618 | | 'DAVID VM 1' | 1.618 - 1.618 | 0.382*min - 0.382*max | 0.128 - 1.618 | 0.618 - 3.618 | | 'DAVID VM 2' | 1.618 - 1.618 | 0.382*min - 0.382*max | 1.618 - 3.618 | 0.618 - 7.618 | | 'Partizan' | 1.618*min - 1.618*max | 0.382*min - 0.382*max | 0.128 - 3.618 | 0.618 - 3.618 | | 'Partizan 2' | 1.618 - 2.236 | 1.128 - 1.618 | 0.128 - 3.618 | 1.618 - 3.618 | | 'Partizan 2.1' | 1.618*min - 1.618*max | 1.128*min - 1.128*max | 0.128 - 3.618 | 0.618 - 3.618 | | 'Partizan 2.2' | 2.236*min - 2.236*max | 1.128*min - 1.128*max | 0.128 - 3.618 | 0.618 - 3.618 | | 'Partizan 2.3' | 1.618*min - 1.618*max | 0.618 - 1.618 | 0.128 - 3.618 | 0.618 - 3.618 | | 'Partizan 2.4' | 2.236*min - 2.236*max | 1.618*min - 1.618*max | 0.128 - 3.618 | 0.618 - 3.618 | | 'TOTAL' | 1.272 - 3.618 | 0.382 - 2.618 | 0.276 - 0.786 | 0.618 - 1.618 | | 'TOTAL NN' | 1.272 - 4.236 | 0.382 - 2.618 | 0.236 - 0.786 | 0.618 - 1.618 | | 'TOTAL 1' | 1.272 - 2.618 | 0.382 - 0.886 | 0.382 - 0.786 | 0.786 - 0.886 | | 'TOTAL 2' | 1.618 - 3.618 | 0.382 - 0.886 | 0.382 - 0.786 | 1.128 - 1.618 | | 'TOTNN 2NN' | 1.618 - 4.236 | 0.382 - 0.886 | 0.382 - 0.786 | 1.128 - 1.618 | | 'TOTAL 3' | 1.272 - 2.618 | 1.128 - 2.618 | 0.276 - 0.618 | 0.618 - 0.886 | | 'TOTNN 3NN' | 1.272 - 2.618 | 1.128 - 2.618 | 0.236 - 0.618 | 0.618 - 0.886 | | 'TOTAL 4' | 1.618 - 2.618 | 1.128 - 2.618 | 0.382 - 0.786 | 1.128 - 1.272 | | 'BG 1' | 2.618*min - 2.618*max | 0.382*min - 0.382*max | 0.128 - 0.886 | 1.0 *min - 1.0 *max | | 'BG 2' | 2.237*min - 2.237*max | 0.447*min - 0.447*max | 0.128 - 0.886 | 1.0 *min - 1.0 *max | | 'BG 3' | 2.0 *min - 2.0 *max | 0.5 *min - 0.5 *max | 0.128 - 0.886 | 1.0 *min - 1.0 *max | | 'BG 4' | 1.618*min - 1.618*max | 0.618*min - 0.618*max | 0.128 - 0.886 | 1.0 *min - 1.0 *max | | 'BG 5' | 1.414*min - 1.414*max | 0.707*min - 0.707*max | 0.128 - 0.886 | 1.0 *min - 1.0 *max | | 'BG 6' | 1.272*min - 1.272*max | 0.786*min - 0.786*max | 0.128 - 0.886 | 1.0 *min - 1.0 *max | | 'BG 7' | 1.171*min - 1.171*max | 0.854*min - 0.854*max | 0.128 - 0.886 | 1.0 *min - 1.0 *max | | 'BG 8' | 1.128*min - 1.128*max | 0.886*min - 0.886*max | 0.128 - 0.886 | 1.0 *min - 1.0 *max | |-------------------|------------------------|------------------------|-----------------------|-----------------------| 🔶 SETTINGS 🔹 Swings Minimum Swing Length: Minimum length used for the swing detection. Maximum Swing Length: Maximum length used for the swing detection. 🔹 Patterns Toggle Pattern Block Toggle separate pattern in each Pattern Block 🔹 Tolerance Fibonacci Ratio: Adds a percentage tolerance below/above the ratio when only one ratio applies, creating two limits. Triangle Area Ratio: Filters patterns based on the ratio of the smallest triangle to the largest triangle. 🔹 Display Labels: Display Pattern Names, Arrows or nothing Patterns: Display or not Last Line: Display previous C-D line when updated 🔹 Style Colors: Pattern Lines/Names/Arrows - background color of patterns Text Size: Text Size of Pattern Names/Arrows 🔹 Calculation Calculated Bars: Allows the usage of fewer bars for performance/speed improvement
Pine Script™ indicator
by fikira
20
libTFLibrary "libTF" libTF: Find higher/lower TF automatically This library to find higher/lower TF from current timeframe(timeframe.period) for Pine Script version6(or higher). Basic Algorithm Using a timeframe scale Array and timeframe.in_seconds() function to find higher/lower timeframe. Return value is na if could not find TF in the timeframe scale. The timeframe scale could be changed by the parameter 'scale'(CSV). How to use 1. Set higher/lower TF higher()/lower() function returns higher/lower TF. Default timeframe scale is "1, 5, 15, 60, 240, 1D, 1M, 3M, 12M". example: htf1 = higher() htf2 = higher(htf1) ltf1 = lower() ltf2 = lower(ltf1) 2. Set higher/lower TF using your timeframe scale The timeframe scale could be changed by the parameter. example: myscale="1,60,1D,1M,12M" htf1 = higher(timeframe.period,myscale) htf2 = higher(htf1,myscale) ltf1 = lower(timeframe.period,myscale) ltf2 = lower(ltf1,myscale) 3. How to use with request.*() function na value is set if no higher/lower TF in timeframe scale. It returns current timeframe's value, when na value as timeframe parameter in request.*(). As bellow, if it should be na when timeframe is na. example: return_value_request_htf1 = na(htf1)?na:request.security(syminfo.tickerid,htf1,timeframe.period) return_value_request_ltf1 = na(ltf1)?na:request.security(syminfo.tickerid,ltf1,timeframe.period) higher(tf, scale)   higher: find higher TF from TF string.   Parameters:      tf (string) : default value is timeframe.period.      scale (string) : TF scale in CSV. default is "1,5,15,60,240,1D,1W,1M,3M,12M".   Returns: higher TF string. lower(tf, scale)   lower: find lower TF from TF string.   Parameters:      tf (string) : default value is timeframe.period.      scale (string) : TF scale in CSV. defalut is "1,5,15,60,240,1D,1W,1M,3M,12M".   Returns: lower TF string.
Pine Script™ library
by nazomobile
GP - SRSI ChannelGP - SRSI Channel Indicator The GP - SRSI Channel is a channel indicator derived from the Stochastic RSI (SRSI) oscillator. It combines SRSI data from multiple timeframes to analyze minimum, maximum, and closing values, forming a channel based on these calculations. The goal is to identify overbought and oversold zones with color coding and highlight potential trading opportunities by indicating trend reversal points. How It Works SRSI Calculation: The indicator calculates the Stochastic RSI values using open, high, low, and close prices from the selected timeframes. Channel Creation: Minimum and maximum values derived from these calculations are combined across multiple timeframes. The midpoint is calculated as the average of these values. Color Coding: Zones within the channel are color-coded with a gradient from red to green based on the ratios. Green zones typically indicate selling opportunities, while red zones suggest buying opportunities. Visual Elements: The channel boundaries (min/max) are displayed as lines. Overbought/oversold regions (95-100 and 0-5) are highlighted with shaded areas. Additional explanatory labels are placed on key levels to guide users. How to Use Trading Strategy: This indicator can be used for both trend following and identifying reversal points. Selling opportunities can be evaluated when the channel reaches the upper green zone, while buying opportunities can be considered in the lower red zone. Timeframe Selection: Users can analyze multiple timeframes simultaneously to gain a broader perspective. Customization: RSI and Stochastic RSI parameters are adjustable, allowing users to tailor the indicator to their trading strategies. Important Note This indicator is for informational purposes only and should not be used as a sole basis for trading decisions. Please validate the results of the indicator with your own analysis.
Pine Script™ indicator
by gokhanpirnal
Dynamic Time Period CandlesThis indicator gives the dynamic history of the current price over various time frames as a series of candles on the right of the display, with optional lines on the chart, so that you can assess the current trend more easily. In the library I found lots of indicators that looked at the previous xx time period candle, but they then immediately switched to the new xx time candle when it started to be formed. This indicator looks back at the rolling previous time period. With this indicator, you can clearly see how price has been behaving over time. IMPORTANT SETUP INFO: Initially, you must go into the settings and select the timeframe (in minutes) that your chart is displaying. If you don't do this then the indicator will look back the wrong number of candles and give you totally wrong results. You can then setup how high you want the candle labels to be on the chart. Then you can select settings for each candle that you want displayed. Anywhere between 1 and 5 different timeframes can be displayed on the chart at once. I initially published an indicator called 'Dynamic 4-Hour Candle (Accurate Highs and Lows)', but this new indicator is so different that it needs to be forked and published as a separate indicator. The reasons for this are below: The original indicator only looked at the previous 4 hour time period. This indicator allows the user to select any time period that they choose. The original indicator only looked at one time period. This indicator allows to select between one and five time periods on the chart at once. The original indicator did not put lines on the chart to show the lookback period and the highs and lows of that time period. This indicator does both those things. The name of the original indicator in no way now describes what this new indicator is capable of, and would be very misleading to anyone who came across it. This new indicator has a name that much more accurately reflects what its' purpose and functionality is.
Pine Script™ indicator
by bobamour
Higher Time Frame Support/Resistance [BigBeluga]The Higher Time Frame Support/Resistance indicator is a tool designed to display pivot points derived from higher timeframes on your current chart. These pivot points are calculated based on the highs and lows of price action in different timeframes, and the indicator draws horizontal lines to represent these levels. These lines act as potential support and resistance zones, giving traders key market levels that may influence future price movement. Each pivot line is color-coded and labeled with its price value and the timeframe it originates from. This allows traders to clearly differentiate between the significance of the levels based on their timeframe. For example, weekly pivot levels may represent stronger, more long-term support and resistance, while hourly pivots offer more immediate, short-term levels to watch. 🔵 IDEA The Higher Time Frame Support/Resistance indicator is designed to simplify the process of tracking key support and resistance levels across multiple timeframes. Pivot points, which represent turning points in the market, are essential for identifying areas where price might reverse or break out. By displaying these levels from higher timeframes directly on the current chart, traders can quickly identify and react to critical areas in the market without needing to switch between different timeframe charts. The indicator labels each pivot point with the specific timeframe it comes from (e.g., 4H, 1D, 1W), making it easy for traders to assess the relative strength of each level. Stronger levels from higher timeframes are likely to act as more significant barriers or support zones, while lower timeframe levels can be used for more precise entries and exits. 🔵 KEY FEATURES Pivot Levels from Multiple Timeframes: The indicator calculates pivot highs and lows from various higher timeframes (e.g., 4H, 1D, 1W) and plots these levels on the current chart. These pivot points are represented by horizontal lines that extend across the chart, serving as potential support and resistance zones. Color-Coded Support and Resistance Lines: Each pivot level is color-coded based on its timeframe, helping traders quickly differentiate between short-term and long-term support and resistance. This visual aid simplifies the analysis and allows for a clearer understanding of key market levels. Price Labels and Timeframe Information: In addition to the pivot lines, the indicator displays labels at each level with the corresponding price and timeframe. For example, a label may show "D Pivot High" followed by the exact price. This helps traders understand the origin and significance of each line, allowing for more informed trading decisions. Labels up and down mark highs and lows from higher timeframes: Pivot Shadows for Enhanced Clarity: The indicator can also draw shadow lines that represent the pivot points but with increased transparency. These shadows allow traders to keep track of previous pivots without cluttering the chart with too many solid lines. The width and transparency of these shadows can be customized in the settings. 🔵 HOW TO USE 🔵 CUSTOMIZATION Timeframes and Pivot Length: Customize which higher timeframes (e.g., 4H, 1D, 1W) you want to display pivot levels from. Adjust the pivot length to control how sensitive the indicator is in detecting market highs and lows. Line Style and Colors: Adjust the line style (solid, dashed, dotted) and colors for each timeframe to match your personal preference or chart theme. This customization helps in maintaining a clear and visually appealing chart. Shadow Line Width and Transparency: Control the width and transparency of the shadow pivot lines to reduce chart clutter while still keeping track of key historical levels.
Pine Script™ indicator
by BigBeluga
11
Enhanced Pressure MTF ScreenerEnhanced Pressure Multi-Timeframe (MTF) Screener Indicator Overview The Enhanced Pressure MTF Screener is an add-on that extends the capabilities of the Enhanced Buy/Sell Pressure, Volume, and Trend Bar Analysis . It provides a clear and consolidated view of buy/sell pressure across multiple timeframes. This indicator allows traders to determine when different timeframes are synchronized in the same trend direction, which is particularly useful for making high-confidence trading decisions. Image below: is the Enhanced Buy/Sell Pressure, Volume, and Trend Bar Analysis with the Enhanced Pressure MTF Screener indicator both active together. Key Features 1.Multi-Timeframe Analysis The indicator screens various predefined timeframes (from 1 week down to 10 minutes). It offers a table view that shows buy or sell ratings for each timeframe, making it easy to see which timeframes are aligned. Traders can choose which timeframes to include based on their trading strategies (e.g., higher timeframes for position trading, lower timeframes for scalping). 2.Pressure and Trend Calculation Uses Buy and Sell Pressure calculations from the Enhanced Buy/Sell Pressure indicator to determine whether buying or selling is dominant in each timeframe. By analyzing pressures on multiple timeframes, the indicator gives a comprehensive perspective of the current market sentiment. The indicator calculates whether a move is strong based on user-defined thresholds, which are displayed in the form of additional signals. 3.Heikin Ashi Option The Heikin Ashi candle type can be toggled on or off. Using Heikin Ashi helps smooth out market noise and provides a clearer indication of trend direction. This is particularly helpful for traders who want to filter out market noise and focus on the primary trend. 4.Table Customization Table Positioning: The table showing timeframe data can be positioned at different locations on the chart—top, middle, or bottom. Text and Alignment: The alignment and text size of the table can be customized for better visual clarity. Color Settings: Users can choose specific colors to indicate buying and selling pressure across timeframes, making it easy to interpret. 5.Strong Movement Indicators The screener provides an additional visual cue (🔥) for timeframes where the movement is deemed strong, based on a user-defined threshold. This helps highlight timeframes where significant buying or selling pressure is present, which could signal potential trading opportunities. How the Screener Works 1.Pressure Calculation For each selected timeframe, the indicator retrieves the Open, High, Low, and Close (OHLC) values. It calculates buy pressure (the range between high and low when the closing price is higher than the opening) and sell pressure (the range between high and low when the closing price is equal to or lower than the opening). The screener computes the pressure ratio, which represents the difference between buying and selling pressure, to determine which side is dominant. 2.Trend Rating and Signal Generation Based on the calculated pressure, the screener determines a trend rating for each timeframe: "Buy," "Sell," or "Neutral." (▲ ,▼ or •) Additionally, it generates a signal (▲ or ▼) to indicate the current trend direction and whether the move is strong (based on the user-defined threshold). If the movement is strong, a fire icon (🔥) is added to indicate that there is significant pressure on that timeframe, signaling a higher confidence in the trend. 3.Customizable Strong Move Thresholds Strong Move Threshold: The screener uses this value to decide whether a trend is significantly strong. A higher value makes it more selective in determining strong moves. Strong Movement Threshold: Helps determine when an additional strong signal should be displayed, offering further insight into the strength of market movement. Inputs and Customization The Enhanced Pressure MTF Screener is highly customizable to fit the needs of individual traders: General Settings: Use Heikin Ashi: Toggle this setting to use Heikin Ashi for a smoother trend representation. Strong Move Threshold: Defines how strong a move should be to be considered significant. Strong Movement Threshold: Specifies the level of pressure required to highlight a move with the fire icon. Table Settings: Position: Choose the vertical position of the screener table (top, middle, or bottom of the chart). Alignment: Align the table (left, center, or right) to best suit your chart layout. Text Size: Adjust the text size in the table for better readability. Table Color Settings: Users can set different colors to represent buying and selling signals for better visual clarity, particularly when scanning multiple timeframes. Timeframe Settings: The screener provides options to include up to ten different timeframes. Traders can select and customize each timeframe to match their strategy. Examples of available timeframes include 1 Week, 1 Day, 12 Hours, down to 10 Minutes, allowing for both broad and detailed analysis. Practical Use Case Identifying Trend Alignment Across Timeframes: Imagine you are about to take a long trade but want to make sure that the trend direction is aligned across multiple timeframes. The screener displays "Buy" ratings across the 4H, 1H, 30M, and 10M timeframes, while higher timeframes (like 1W and 1D) also show "Buy" with strong signals (🔥). This indicates that buying pressure is strong across the board, adding confidence to your trade. Spotting Reversal Opportunities: If a downtrend is evident across most timeframes but suddenly a higher timeframe, such as 12H, changes to "Buy" while showing a strong move (🔥), this could indicate a potential reversal. The screener allows you to spot these discrepancies and consider taking early action. Benefits for Traders 1.Synchronization Across Timeframes: One of the main strengths of this screener is its ability to show synchronized buy/sell signals across different timeframes. This makes it easy to confirm the strength and consistency of a trend. For example, if you see that all the selected timeframes display "Buy," this implies that both short-term and long-term traders are favoring the upside, giving additional confidence to go long. 2.Quick and Visual Trend Overview: The table offers an at-a-glance summary, reducing the time required to manually inspect each timeframe. This makes it particularly useful for traders who want to make quick decisions, such as day traders or scalpers. 3.Strong Move Indicator: The use of fire icons (🔥) provides an easy way to identify significant movements. This is particularly helpful for traders looking for breakouts or strong market conditions that could lead to high probability trades. To put it short or to summarize The Enhanced Pressure MTF Screener is a powerful add-on for traders looking to understand how buy and sell pressure aligns across multiple timeframes. It offers: A clear summary of buying or selling pressure across different timeframes. Heikin Ashi smoothing, providing an option to reduce market noise. Strong movement signals to highlight significant trading opportunities. Customizable settings to fit any trading strategy or style. The screener and the main indicator are best used together, as the screener provides the multi-timeframe overview, while the main indicator provides an in-depth look at each individual bar and trend. I hope my indicator helps with your trading, if you guys have any ideas or questions there is the comment section :D
Pine Script™ indicator
by Debis03
6
Custom Time Frame BackgroundThis indicator allows you to highlight custom time frames on your chart with alternating background colors. It's particularly useful for visualizing specific intervals that are not standard on TradingView, such as 4-hour, 6-hour, or any other custom duration you choose. Features: Customizable time frames: Set any combination of minutes, hours, and days Fallback to daily/weekly coloring if no custom time frame is set User-defined colors for alternating backgrounds How to use: Add the indicator to your chart In the settings, input your desired custom time frame: Set 'Custom Minutes' for intervals less than an hour Use 'Custom Hours' for hourly intervals Use 'Custom Days' for daily intervals Adjust 'Color 1' and 'Color 2' to your preferred background colors Examples: For a 4-hour time frame: Set Custom Hours to 4 For a 6-hour time frame: Set Custom Hours to 6 For a 2-day time frame: Set Custom Days to 2 If all inputs are set to 0, the indicator will default to daily coloring for intraday charts and weekly coloring for higher timeframes. This indicator helps traders visually segment their charts into custom intervals, making it easier to identify patterns and trends over specific time periods.
Pine Script™ indicator
by foreseersfx
Dynamic Score SMA [QuantAlgo]Dynamic Score SMA 📈🌊 The Dynamic Score SMA by QuantAlgo offers a powerful trend-following approach that combines the simplicity of the Simple Moving Average (SMA) with an innovative dynamic trend scoring technique . By continuously evaluating price movement relative to the SMA over a customizable window, this indicator adapts to varying market conditions, providing traders and investors with clearer, more adaptable trend signals. With this dynamic scoring approach, the Dynamic Score SMA helps identify trend shifts, allowing for more strategic decision-making. 🌟 Conceptual Foundation and Innovation At the core of the Dynamic Score SMA is its dynamic trend score system , which assesses price movements by comparing them to the SMA over a series of historical data points. This technique goes beyond traditional SMA indicators by offering a dynamic, probabilistic evaluation of trend strength, delivering a more responsive and nuanced view of market direction. The integration of this scoring system enables traders and investors to navigate both trending and sideway markets with greater confidence and precision. ⚙️ Technical Composition and Calculation The Dynamic Score SMA leverages the Simple Moving Average to establish a baseline trend, with customizable SMA length to control the indicator’s sensitivity. The dynamic trend scoring technique then evaluates price behavior relative to the SMA over a specified window, generating a trend score that reflects the current market bias. When the score crosses the designated uptrend or downtrend thresholds, the indicator signals a potential trend shift. By adjusting the SMA length, window duration, and thresholds, users can refine the indicator’s responsiveness to match their preferred trading or investing strategy, making it suitable for both volatile and steady markets. 📈 Features and Practical Applications Customizable SMA Length: Set the length of the SMA to control how sensitive the trend is to price changes. Longer lengths produce smoother trends, while shorter lengths increase responsiveness. Window Length for Dynamic Scoring: Adjust the window length to determine how many data points are considered in the dynamic trend score calculation, allowing for more tailored analysis of recent versus long-term trends. Uptrend/Downtrend Thresholds: Define thresholds for triggering trend signals. Higher thresholds reduce sensitivity, providing clearer signals in volatile markets, while lower thresholds capture shorter-term movements. Bar and Background Coloring: Visual cues, including bar coloring and background fills, provide a quick reference for current trend direction, making it easier to monitor market conditions. Trend Confirmation: The dynamic trend scoring system verifies trend strength, offering more reliable entry and exit points by filtering out potential false signals. ⚡️ How to Use ✅ Add the Indicator: Add the Dynamic Score SMA to your favourites, then apply it to your chart. Customize the SMA length, window size, and thresholds to match your trading or investing preferences. 👀 Monitor Trend Shifts: Observe the trend in relation to the SMA and watch for signals when the score crosses key thresholds. Bar and/or background coloring will help identify the current trend direction and any shifts in momentum. 🔔 Set Alerts: Configure alerts for significant trend crossovers and reversals, enabling you to act on market changes in real-time without needing constant chart observation. 💫 Summary and Usage Tips The Dynamic Score SMA by QuantAlgo is a sophisticated trend-following indicator that combines the familiarity of the SMA with a dynamic trend scoring system, providing a more adaptable and probabilistic approach to trend analysis. By tailoring the SMA length, scoring window, and thresholds, traders and investors can fine-tune the indicator for both short-term adjustments and long-term trend following. For optimal use, adjust sensitivity based on market volatility, and rely on the visual cues for clear trend confirmation. Whether you’re navigating choppy markets or stable trends, the Dynamic Score SMA offers a refined approach to capturing market direction with enhanced precision.
Pine Script™ indicator
by QuantAlgo
7
CPR by NKDCentral Pivot Range (CPR) Trading Strategy: The Central Pivot Range (CPR) is a widely-used tool in technical analysis, helping traders pinpoint potential support and resistance levels in the market. By using the CPR effectively, traders can better gauge market trends and determine favorable entry and exit points. This guide explores how the CPR works, outlines its calculation, and describes how traders can enhance their strategies using an extended 10-line version of CPR. What Really Central Pivot Range (CPR) is? At its core, the CPR consists of three key lines: Pivot Point (PP) – The central line, calculated as the average of the previous day’s high, low, and closing prices. Upper Range (R1) – Positioned above the Pivot Point, acting as a potential ceiling where price may face resistance. Lower Range (S1) – Found below the Pivot Point, serving as a potential floor where price might find support. Advanced traders often expand on the traditional three-line CPR by adding extra levels above and below the pivot, creating up to a 10-line system. This extended CPR allows for a more nuanced understanding of the market and helps identify more detailed trading opportunities. Applying CPR for Trading Success 1. How CPR is Calculation The CPR relies on the previous day's high (H), low (L), and close (C) prices to create its structure: Pivot Point (PP) = (H + L + C) / 3 First Resistance (R1) = (2 * PP) - L First Support (S1) = (2 * PP) - H Additional resistance levels (R2, R3) and support levels (S2, S3) are calculated by adding or subtracting multiples of the previous day’s price range (H - L) from the Pivot Point. 2. Recognizing the Market Trend To effectively trade using CPR, it’s essential to first determine whether the market is trending up (bullish) or down (bearish). In an upward-trending market, traders focus on buying at support levels, while in a downward market, they look to sell near resistance. 3. Finding Ideal Entry Points Traders often look to enter trades when price approaches key levels within the CPR range. Support levels (S1, S2) offer buying opportunities, while resistance levels (R1, R2) provide selling opportunities. These points are considered potential reversal zones, where price may bounce or reverse direction. 4. Managing Risk with Stop-Loss Orders Proper risk management is crucial in any trading strategy. A stop-loss should be set slightly beyond the support level for buy positions and above the resistance level for sell positions, ensuring that losses are contained if the market moves against the trader’s position. 5. Determining Profit Targets Profit targets are typically set based on the distance between entry points and the next support or resistance level. Many traders apply a risk-reward ratio, aiming for larger potential profits compared to the potential losses. However, if the next resistance and support level is far then middle levels are used for targets (i.e. 50% of R1 and R2) 6. Confirmation Through Other Indicators While CPR provides strong support and resistance levels, traders often use additional indicators to confirm potential trade setups. Indicators such as moving averages can help validate the signals provided by the CPR. 7. Monitoring Price Action At CPR Levels Constantly monitoring price movement near CPR levels is essential. If the price fails to break through a resistance level (R1) or holds firm at support (S1), it can offer cues on when to exit or adjust a trade. However, a strong price break past these levels often signals a continued trend. 8. Trading Breakouts with CPR When the price breaks above resistance or below support with strong momentum, it may signal a potential breakout. Traders can capitalize on these movements by entering positions in the direction of the breakout, ideally confirmed by volume or other technical indicators. 9. Adapting to Changing Market Conditions CPR should be used in the context of broader market influences, such as economic reports, news events, or geopolitical shifts. These factors can dramatically affect market direction and how price reacts to CPR levels, making it important to stay informed about external market conditions. 10. Practice and Backtesting for Improvements Like any trading tool, the CPR requires practice. Traders are encouraged to backtest their strategies on historical price data to get a better sense of how CPR works in different market environments. Continuous analysis and practice help improve decision-making and strategy refinement. The Advantages of Using a 10-Line CPR System An extended 10-line CPR system—comprising up to five resistance and five support levels—provides more granular control and insight into market movements. This expanded view helps traders better gauge trends and identify more opportunities for entry and exit. Key benefits include: R2, S2 Levels: These act as secondary resistance or support zones, giving traders additional opportunities to refine their trade entries and exits. R3, S3 Levels: Provide an even wider range for identifying reversals or trend continuations in more volatile markets. Flexibility: The broader range of levels allows traders to adapt to changing market conditions and make more precise decisions based on market momentum. So in Essential: The Central Pivot Range is a valuable tool for traders looking to identify critical price levels in the market. By providing a clear framework for identifying potential support and resistance zones, it helps traders make informed decisions about entering and exiting trades. However, it’s important to combine CPR with sound risk management and additional confirmation through other technical indicators for the best results. Although no trading tool guarantees success, the CPR, when used effectively and combined with practice, can significantly enhance a trader’s ability to navigate market fluctuations.
Pine Script™ indicator
by nikhilkdwivedi
4
Options Series - MTF_Parabolic_SAR ⭐ Purpose of the Script This script, titled "Options Series - MTF_Parabolic_SAR," is designed for analyzing price trends using the Parabolic SAR (Stop and Reverse) indicator across multiple timeframes (MTF). It dynamically highlights bullish and bearish conditions, helping traders identify trends with improved accuracy. The script uses the Parabolic SAR across three customizable timeframes (default: 5, 15, and 60 minutes) to gauge the market sentiment. ⭐ Key Features and Insights: Multi-Timeframe Parabolic SAR: The script calculates the Parabolic SAR for three different timeframes ( input_tf_1 , input_tf_2 , and input_tf_3 ). Traders can configure these timeframes to match their trading style (e.g., intraday, swing). The SAR plots adapt to the selected timeframe, helping traders see different perspectives of price movement, such as short-term and long-term trends. Bullish and Bearish Conditions: The script determines bullish and bearish conditions by comparing the close price against the Parabolic SAR in each timeframe. If at least one timeframe indicates a bullish condition (close price above SAR), the bars are colored green . Conversely, if one timeframe signals bearish conditions (close below SAR), the bars turn red . This provides an at-a-glance view of the price trend across multiple timeframes, offering insights into the market's strength and direction. Visual Enhancements: Bar Coloring: Bars are visually enhanced with a color scheme: green for bullish , red for bearish , and gray for neutral conditions. This makes it easy to spot market trends and reversals directly on the chart. Candle Plotting: The current candle is plotted with the corresponding color and labeled with the SAR values for each timeframe. This aids traders in tracking real-time price action. Labeling of SAR Values: The script displays SAR values for each timeframe as floating labels next to the chart. These labels contain the timeframe and the exact SAR value, making it easier to reference without cluttering the chart. ⭐ Trading Advantages: Customizable and Adaptive: The customizable timeframes and SAR settings allow traders to adapt the script to various market conditions and their specific trading strategies. This flexibility provides a powerful tool for identifying entry and exit points. Multi-Timeframe Insights: By considering multiple timeframes, the script offers a comprehensive market view, making it easier to confirm strong trends and avoid false signals. ⭐ How It Helps Traders: Trend Identification: By visualizing Parabolic SAR across multiple timeframes, traders can quickly assess trend strength and direction. Reversal Detection: The script's color changes (green to red or vice versa) signal potential trend reversals, offering critical information for managing trades and reducing risk. 🚀 Conclusion: This script provides traders with a multi-timeframe analysis tool for identifying trends and potential reversals using the Parabolic SAR. By offering customizable timeframes, clear visual cues, and SAR value labeling, it simplifies decision-making and enhances market insights.
Pine Script™ indicator
by Options_Series
MENTFX AVERAGES MULTI TIMEFRAMEThe MENTFX AVERAGES MULTIME TIMEFRAME indicator is designed to provide traders with the ability to visualize multiple moving averages (MAs) from higher timeframes on their current chart, regardless of the chart's timeframe. It combines the power of exponential moving averages (EMAs) to help traders identify trends, spot potential reversal points, and make more informed trading decisions. Key Features: Multi-Timeframe Moving Averages: This indicator plots moving averages from daily timeframes directly on your chart, helping you keep track of higher timeframe trends while trading in any timeframe. Customizable Moving Averages: You can adjust the length and visibility of up to three EMAs (default settings are 5, 10, and 20-period EMAs) to suit your trading style. Overlay on Price: The indicator is designed to be overlaid on your price chart, seamlessly integrating with your existing analysis. Simple but Effective: By offering a clear visual guide to where price is trading relative to important higher timeframe levels, this indicator helps traders avoid trading against major trends. Why It’s Unique: Validation Timeframe Flexibility: Unlike traditional moving average indicators that only work within the same chart's timeframe, the MENTFX AVERAGES M indicator allows you to pull moving averages from higher timeframes (default: Daily) and overlay them on any chart you're currently viewing, whether it's intraday (minutes) or even weekly. This cross-timeframe visibility is critical in determining the true market trend, adding context to your trades. Customizability: Although the default settings focus on daily EMAs (5, 10, and 20 periods), traders can modify the parameters, including the type of moving average (Simple, Weighted, etc.), making it adaptable for any strategy. Whether you want shorter-term or longer-term averages, this indicator covers your needs. Trend Confirmation Tool: The use of multiple EMAs helps traders confirm trend direction and potential price breakouts or reversals. For example, when the shorter-term 5 EMA crosses above the 20 EMA, it can signal a potential bullish trend, while the opposite could indicate bearish pressure. How This Indicator Helps: Identify Key Support and Resistance Levels: Higher timeframe moving averages often act as dynamic support and resistance. This indicator helps you stay aware of those critical levels, even when trading lower timeframes. Trend Identification: Knowing where the market is relative to the 5, 10, and 20 EMAs from a higher timeframe gives you a clearer picture of whether you're trading with or against the prevailing trend. Improved Decision Making: By aligning your trades with the direction of higher timeframe trends, you can increase your confidence in trade entries and exits, avoiding low-probability setups. Multi-Market Use: This indicator works well across various asset classes—stocks, forex, crypto, and commodities—making it versatile for any trader. How to Use: Intraday Trading: Use the daily EMAs as a guide to see if intraday price movements align with longer-term trends. Swing Trading: Plot daily EMAs to track the strength of a larger trend, using pullbacks to the moving averages as potential entry points. Trend Trading: Monitor crossovers between the moving averages to signal potential changes in trend direction. Default Settings: 5 EMA (Daily) – Blue Line 10 EMA (Daily) – Black Line 20 EMA (Daily) – Red Line These lines will plot on your chart with a subtle opacity (33%) to ensure they don’t obstruct price action, while still providing crucial visual guidance on market trends. This indicator is perfect for traders who want to blend technical analysis with multi-timeframe insights, helping you stay in sync with broader market movements while executing trades on any timeframe.
Pine Script™ indicator
by mentfx50
Custom Time Range HighlighterCustom Time Range Highlighter This versatile indicator allows traders to highlight specific time ranges on their charts, accommodating users worldwide by supporting customizable UTC offsets. Traders can define two distinct time ranges, setting start and end hours in their local time zone. A toggle option enables the display of highlights for today only , ensuring focus on current trading conditions. Ideal for day traders and those following specific market sessions, this tool enhances visibility of active trading periods and aids in effective trade management.
Pine Script™ indicator
by eliasjan01
H-Infinity Volatility Filter [QuantAlgo]Introducing the H-Infinity Volatility Filter by QuantAlgo 📈💫 Enhance your trading/investing strategy with the H-Infinity Volatility Filter , a powerful tool designed to filter out market noise and identify clear trend signals in volatile conditions. By applying an advanced H∞ filtering process, this indicator assists traders and investors in navigating uncertain market conditions with improved clarity and precision. 🌟 Key Features: 🛠 Customizable Noise Parameters: Adjust worst-case noise and disturbance settings to tailor the filter to various market conditions. This flexibility helps you adapt the indicator to handle different levels of market volatility and disruptions. ⚡️ Dynamic Trend Detection: The filter identifies uptrends and downtrends based on the filtered price data, allowing you to quickly spot potential shifts in the market direction. 🎨 Color-Coded Visuals: Easily differentiate between bullish and bearish trends with customizable color settings. The indicator colors the chart’s candles according to the detected trend for immediate clarity. 🔔 Custom Alerts: Set alerts for trend changes, so you’re instantly informed when the market transitions from bullish to bearish or vice versa. Stay updated without constantly monitoring the charts. 📈 How to Use: ✅ Add the Indicator: Add the H-Infinity Volatility Filter to your favourites and apply it to your chart. Customize the noise and disturbance parameters to match the volatility of the asset you are trading/investing. This allows you to optimize the filter for your specific strategy. 👀 Monitor Trend Shifts: Watch for clear visual signals as the filter detects uptrends or downtrends. The color-coded candles and line plots help you quickly assess market conditions and potential reversals. 🔔 Set Alerts: Configure alerts to notify you when the trend changes, allowing you to react quickly to potential market shifts without needing to manually track price movements. 🌟 How It Works and Academic Background: The H-Infinity Volatility Filter is built on the foundations of H∞ (H-infinity) control theory , a mathematical framework originating from the field of engineering and control systems. Developed in the 1980s by notable engineers such as George Zames and John C. Doyle , this theory was designed to help systems perform optimally under uncertain and noisy conditions. H∞ control focuses on minimizing the worst-case effects of disturbances and noise, making it a powerful tool for managing uncertainty in complex environments. In financial markets, where unpredictable price fluctuations and noise often obscure meaningful trends, this same concept can be applied to price data to filter out short-term volatility. The H-Infinity Volatility Filter adopts this approach, allowing traders and investors to better identify potential trends by reducing the impact of random price movements. Instead of focusing on precise market predictions, the filter increases the probability of highlighting significant trends by smoothing out market noise. This indicator works by processing historical price data through an H∞ filter that continuously adjusts based on worst-case noise levels and disturbances. By considering several past states, it estimates the current price trend while accounting for potential external disruptions that might influence price behavior. Parameters like "worst-case noise" and "disturbance" are user-configurable, allowing traders to adapt the filter to different market conditions. For example, in highly volatile markets, these parameters can be adjusted to manage larger price swings, while in more stable markets, they can be fine-tuned for smoother trend detection. The H-Infinity Volatility Filter also incorporates a dynamic trend detection system that classifies price movements as bullish or bearish. It uses color-coded candles and plots—green for bullish trends and red for bearish trends—to provide clear visual cues for market direction. This helps traders and investors quickly interpret the trend and act on potential signals. While the indicator doesn’t guarantee accuracy in trend prediction, it significantly reduces the likelihood of false signals by focusing on meaningful price changes rather than random fluctuations. How It Can Be Applied to Trading/Investing: By applying the principles of H∞ control theory to financial markets, the H-Infinity Volatility Filter provides traders and investors with a sophisticated tool that manages uncertainty more effectively. Its design makes it suitable for use in a wide range of markets—whether in fast-moving, volatile environments or calmer conditions. The indicator is versatile and can be used in both short-term trading and medium to long-term investing strategies. Traders can tune the filter to align with their specific risk tolerance, asset class, and market conditions, making it an ideal tool for reducing the effects of market noise while increasing the probability of detecting reliable trend signals. For investors, the filter can help in identifying medium to long-term trends by filtering out short-term price swings and focusing on the broader market direction. Whether applied to stocks, forex, commodities, or cryptocurrencies, the H-Infinity Volatility Filter helps traders and investors interpret market behavior with more confidence by offering a more refined view of price movements through its noise reduction techniques. Disclaimer: The H-Infinity Volatility Filter is designed to assist in market analysis by filtering out noise and volatility. It should not be used as the sole tool for making trading or investment decisions. Always incorporate other forms of analysis and risk management strategies. No statements or signals from this indicator or us should be considered financial advice. Past performance is not indicative of future results.
Pine Script™ indicator
by QuantAlgo
Multi-Asset Cross Timeframe Divergence Ind. (MACDI) // AlgoFyreThe Multi-Asset Cross Timeframe Divergence Indicator (MACDI) identifies divergences in momentum like RSI across multiple assets and timeframes. It visually highlights lagging correlated asset momentum divergences, helping traders spot inefficiencies and potential trade opportunities in the following asset. 🔶 KEY FEATURES 🔸Average Momentum Trendline for Each Timeframe The Average Momentum Trendline feature calculates the average momentum of multiple assets over specified timeframes. It uses smoothed values to determine the momentum trend for each timeframe on the average aggregated momentum of both assets. This trendline helps traders identify the overall direction of the market momentum, providing a clearer picture of potential price movements. 🔸Real-time Divergence Indication and Alert Table The Real-time Divergence Indications and Alert Table feature visualizes detected divergences between the momentum values of the two assets across different timeframes. It identifies both bullish and bearish divergences, signaling lagging reversals in the the following asset and potential trading opportunities. When a divergence is detected, the system generates real-time visual indications on the chart and in an overview table for traders to act promptly. The alert table provides a comprehensive overview of all detected divergences, making it easier for traders to monitor and respond to market changes. 🔸Color and Size Based Labels on Price Chart based on Divergence Type The Color and Size Based Labels feature visually represents divergences directly on the price chart. Bullish and bearish divergences are marked with distinct colors and sizes, making them easily identifiable at a glance. Larger labels indicate higher timeframes and thus generally more significance. 🔶 INSTRUCTION GUIDELINES 🔸Identify Divergence Clusters The more divergences align, the higher the probability of a potential trend reversal in the asset. When multiple multi-timeframe divergences occur in both lower and higher timeframes within a local cluster, the probability of a reversal increases. This is valid for both for bullish and bearish divergences. 🔸Spot Low Probability Divergences To further increase the probability, analyze the current state of the average momentum trendline. For a bullish reversal, a relatively low level of the average momentum trendline is preferred, whereas for a bearish reversal, a relatively high level is preferred. 🔶 INDIVIDUAL CONFIGURATION 🔸Leading Asset This input allows the user to select the leading asset for the divergence analysis. 🔸Following Asset This input allows the user to select the following asset for the divergence analysis. 🔸Higher Timeframe This input sets the higher timeframe for the analysis. 🔸Lower Timeframe This input sets the lower timeframe for the analysis. 🔸Show RSI Divergence This input enables or disables the display of RSI divergence signals. 🔸RSI Length This input sets the length of the RSI calculation. 🔸RSI Source This input sets the source data for the RSI calculation (e.g., close price). 🔸RSI Smoothing Length This input sets the length of the smoothing applied to the RSI values. 🔸Smoothing Method This input sets the method used for smoothing the RSI values. 🔶 CONCLUSION The Multi-Asset Cross Timeframe Divergence Indicator (MACDI) is a powerful tool for identifying momentum divergences across multiple assets and timeframes. Its visual cues and customizable table make it easy to use and interpret, providing valuable insights for trading decisions.
Pine Script™ indicator
by AlgoFyre
Horizontal Lines 0.5, BY ROSHAN SINGHThis indicator identify support and resistance to trade in 1min time frame, based of fib 0.5 level, on 15 min time frame find major high and low means major swing, low will be our start level and high will be our end level input in setting, substract high and end level and now divide answer with 2 till the daily volatility of a index or stock, if saying about nifty suppose nifty daily travel minimum for 65 pts then interval will be 65 input in settings, now all horizontals lines means support and level will be plotted on chart, buy on support, sell on resistance
Pine Script™ indicator
by Roshan_A_Singh
2
Custom EMA Multi-Timeframe Indicator [Pineify] This innovative indicator combines Exponential Moving Averages (EMAs) across multiple timeframes to provide traders with a comprehensive view of market trends and potential trading opportunities. By analyzing short, medium, and long-term EMAs simultaneously, this indicator offers valuable insights into market dynamics and helps identify high-probability entry and exit points. Key Features Multi-timeframe analysis using customizable EMAs Visual representation of trend alignment across different timeframes Customizable EMA lengths and sources for each timeframe Buy and sell signals based on EMA crossovers Alert functionality for real-time trade notifications How It Works The Custom EMA Multi-Timeframe Indicator calculates three separate EMAs: 1. Short-term EMA: Represents immediate market sentiment 2. Medium-term EMA: Captures intermediate trend direction 3. Long-term EMA: Reflects the overall market trend These EMAs are plotted on the chart using different colors for easy identification. The indicator generates buy and sell signals based on the relative positions of these EMAs, providing traders with clear visual cues for potential trade entries and exits. Trading Ideas and Insights This indicator offers several powerful trading concepts: Trend Alignment: When all three EMAs are aligned (short above medium above long), it indicates a strong trend. Traders can look for pullbacks to enter in the direction of the trend. Trend Reversal: When the short-term EMA crosses above or below both the medium and long-term EMAs, it may signal a potential trend reversal. This can be used to exit existing positions or enter new trades in the opposite direction. Range-bound Markets: When the EMAs are tightly grouped together, it suggests a consolidation phase. Traders can wait for a breakout or use range-trading strategies. Momentum Confirmation: The speed at which the short-term EMA diverges from or converges with the longer-term EMAs can indicate the strength of the current move. Unique Aspects What sets this indicator apart is its ability to synthesize information from multiple timeframes into a single, easy-to-interpret visual display. Unlike traditional single-timeframe EMAs, this indicator provides a more holistic view of market trends, reducing false signals and improving trade timing. The customizable nature of the indicator allows traders to adapt it to various trading styles and market conditions. By adjusting the EMA lengths and sources, traders can fine-tune the indicator to their specific needs and preferences. How to Use 1. Apply the indicator to your chart 2. Customize the timeframes and EMA settings as desired 3. Look for buy signals when the short and medium EMAs cross above the long EMA 4. Look for sell signals when the short and medium EMAs cross below the long EMA 5. Use the relative positions of the EMAs to gauge overall trend strength and direction 6. Combine with other technical analysis tools for confirmation Customization The indicator offers extensive customization options: Short, medium, and long timeframes can be adjusted EMA lengths for each timeframe are customizable EMA source (close, open, high, low, etc.) can be selected for each timeframe Colors and line styles can be modified to suit personal preferences Alert settings can be configured for automated trade notifications Conclusion The Custom EMA Multi-Timeframe Indicator is a powerful tool for traders seeking to gain a comprehensive understanding of market trends across different time horizons. By combining multiple EMAs and timeframes, it provides a unique perspective on market dynamics, helping traders make more informed decisions and potentially improve their trading results. Whether you're a day trader looking for short-term opportunities or a swing trader focusing on longer-term trends, this indicator offers valuable insights that can enhance your trading strategy. Its flexibility and customization options make it suitable for a wide range of trading styles and market conditions. Remember: While this indicator can be a valuable tool in your trading arsenal, it should not be used in isolation. Always combine it with other forms
Pine Script™ indicator
by Pineify
2
Multi-Timeframe EMA Distance & % Change TableDescription of Multi-Timeframe EMA Distance & % Change Table The Multi-Timeframe EMA Distance & % Change Table indicator is designed to display the distance and percentage change between the current price and the Exponential Moving Averages (EMAs) on multiple timeframes. It creates a table to show these values, with customizable options for decimal precision . Key Features: Inputs: - Timeframes (tf1, tf2, tf3, tf4): User-defined timeframes for EMA calculations (e.g., 1 minute, 15 minutes, daily, etc.). - EMA Levels (emaLevel, emaLevel2, emaLevel3): User-defined periods for three different EMAs. EMA Calculations: - Computes EMAs for the specified levels (50, 100, 200) on each of the user-selected timeframes. Plotting: - Plots the EMAs on the chart with distinct colors: Orange, Teal, and Green for different EMAs. Display Options: - Checkbox (displayAsPercentage): Allows the user to toggle between displaying distances or percentage changes. - Decimal Precision: - decimalPlacesDistance: Specifies the number of decimal places for rounded distance values. - decimalPlacesPercentage: Specifies the number of decimal places for rounded percentage values. Table Creation: - Location: Table is placed in the top-right corner of the chart. - Headers: Includes columns for each timeframe and EMA distance/percentage. Distance and Percentage Calculations: - Distances: Calculated as the difference between the current price and the EMA values for each timeframe. - Percentages: Calculated as the distance divided by the EMA value, converted to a percentage. Decimal Rounding: - Custom Rounding Function: Ensures that distance and percentage values are displayed with the user-specified number of decimal places. Color Coding: - Distance Values: Colored green if positive, red if negative. - Table Entries: Display either the rounded distance or percentage, based on user selection. Table Update: - The table is dynamically updated with either distance or percentage values based on the user's choice and rounded to the specified number of decimal places. This indicator provides a comprehensive overview of EMA distances and percentage changes across multiple timeframes, with detailed control over the precision of the displayed values.
Pine Script™ indicator
by Kokoabe
Higher Time Frame(HTF)The Higher Time Frame (HTF) will be displayed in a box. You can choose HTF periods from: 15min, 30min, 1hour, 2hour, 3hour, 4hour, 6hour, 8hour, 12hour, 1day, 1week, 2week, 4week, 1month, 2month, 3month, 4month, 6month, and 1year. An error will occur if you set a period longer than the current candlestick period being displayed. The HTF Box can display a maximum of 500 boxes. There is no guarantee that all combinations of periods will work correctly. ---- 上位足(Higher Time Frame, HTF) をボックスで表示します。 上位足の期間は、15分 30分 1時間 2時間 3時間 4時間 6時間 8時間 12時間 1日 1週 2週 4週 1月 2月 3月 4月 6月 1年から選べます。 表示しているローソク足の期間より長い期間を設定しないとエラーとなります。 上位足ボックスは最大500個表示することができます。 全ての期間の組み合わせで正しく動くことを保証するものではありません。
Pine Script™ indicator
by Aki_Pine1024
4
Custom Supertrend Multi-Timeframe Indicator [Pineify]Supertrend Multi-Timeframe Indicator Introduction The Supertrend Multi-Timeframe Indicator is an advanced trading tool designed to help traders identify trend directions and potential buy/sell signals by combining Supertrend indicators from multiple timeframes. This script is original in its approach to integrating Supertrend calculations across different timeframes, providing a more comprehensive view of market trends. Concepts and Calculations The indicator utilizes the Supertrend algorithm, which is based on the Average True Range (ATR). The Supertrend is a popular tool for trend-following strategies, and this script enhances its capabilities by incorporating data from a larger timeframe. Supertrend Factor: Determines the sensitivity of the Supertrend line. ATR Length: Defines the period for calculating the Average True Range. Larger Supertrend Factor and ATR Length: Applied to the larger timeframe for a broader trend perspective. Larger Timeframe: The higher timeframe from which the secondary Supertrend data is sourced. How It Works The script calculates the Supertrend for the current timeframe using the specified factor and ATR length. Simultaneously, it requests Supertrend data from a larger timeframe. Buy and sell signals are generated based on crossovers and crossunders of the Supertrend lines from both timeframes. Visual cues (up and down arrows) are plotted on the chart to indicate buy and sell signals. Background colors change to reflect the trend direction: green for an uptrend and red for a downtrend. Usage Add the indicator to your TradingView chart. Customize the Supertrend factors, ATR lengths, and larger timeframe according to your trading strategy. Enable or disable buy and sell alerts as needed. Monitor the chart for visual signals and background color changes to make informed trading decisions. Note: The indicator is best used in conjunction with other technical analysis tools and should not be relied upon as the sole basis for trading decisions. Conclusion The Supertrend Multi-Timeframe Indicator offers a unique and powerful way to analyze market trends by leveraging the strengths of the Supertrend algorithm across multiple timeframes. Its customizable settings and clear visual signals make it a valuable addition to any trader's toolkit.
Pine Script™ indicator
by Pineify
3