XAU CAPITAL Premium ZonesXAU CAPITAL • Premium Support & Supply Zones is a minimalist yet powerful TradingView indicator designed for traders who prefer clarity over clutter.
This indicator automatically detects key Support and Supply zones based on pivot structure and price behavior, helping traders identify high-probability reaction areas where price is likely to pause, reverse, or continue.
🔍 Key Features:
✔ Automatically plotted Support & Supply zones
✔ Clean, transparent zones for clear price visibility
✔ EMA-based trend structure for directional bias
✔ Works smoothly on XAUUSD (Gold) and other markets
✔ Ideal for SMC, price action & intraday trading
✔ Non-repainting structure logic
🎯 Best Used For:
Gold (XAUUSD) trading
Intraday & swing setups
Entry refinement at key zones
Market structure & trend alignment
⚠️ This indicator is a technical tool and should be used with proper risk management and confirmation.
Trend Analysis
Flexible Moving Average SuiteFlexible Moving Average Suite is a customizable moving average indicator that allows traders to configure up to 4 independent moving average lines with full control over calculation method, period, source, color, and line width.
Key Features:
Dual Calculation Methods: Choose between Simple Moving Average (SMA) or Exponential Moving Average (EMA) for each line independently
Full Customization: Adjust period length (1-∞), data source (close, open, high, low, etc.), color, and line width for each MA
Individual Toggle Controls: Show or hide each moving average line as needed
Default Configuration: Pre-configured with commonly used Fibonacci-based periods (5, 13, 21, 34) for quick start
Clean Visualization: Professional color scheme with distinct colors for easy identification
How to Use:
Add the indicator to your chart
Open Settings → "均线系统设置" (Moving Average Settings)
For each MA line (MA1-MA4):
Toggle visibility on/off
Select calculation type (SMA/EMA)
Choose data source (default: close)
Set period length
Adjust line width
Pick your preferred color
Click "OK" to apply changes
Best Practices:
Use multiple timeframes to identify trend alignment
Shorter periods (5-13) respond quickly to price changes, suitable for entry signals
Longer periods (21-34+) help identify major trend direction
Color-code your MAs consistently across charts for better visual recognition
Combine with price action and volume for confirmation
Technical Details:
Written in Pine Script v6
Overlay indicator (displays on price chart)
Lightweight and efficient
Open source under Mozilla Public License 2.0
No repainting
Default Settings:
MA1: EMA(5) - Yellow (#f6c309)
MA2: EMA(13) - Orange (#fb9800)
MA3: EMA(21) - Deep Orange (#fb6500)
MA4: EMA(34) - Red (#f60c0c)
This indicator is ideal for traders who need a simple, reliable, and highly customizable moving average solution without unnecessary complexity.
中文说明 (Chinese Description)
灵活均线系统 是一个可定制的移动平均线指标，允许交易者配置最多4条独立的移动平均线，并完全控制计算方法、周期、数据源、颜色和线宽。
主要特点：
双重计算方法： 每条线可独立选择简单移动平均线（SMA）或指数移动平均线（EMA）
完全自定义： 为每条MA调整周期长度（1-∞）、数据源（收盘、开盘、最高、最低等）、颜色和线宽
独立开关控制： 根据需要显示或隐藏每条移动平均线
默认配置： 预配置常用的斐波那契周期（5、13、21、34）以便快速开始
清晰可视化： 专业配色方案，不同颜色便于识别
使用方法：
将指标添加到图表
打开设置 → "均线系统设置"
对于每条MA线（MA1-MA4）：
切换显示/隐藏
选择计算类型（SMA/EMA）
选择数据源（默认：收盘价）
设置周期长度
调整线宽
选择您喜欢的颜色
点击"确定"应用更改
最佳实践：
使用多个时间周期识别趋势一致性
较短周期（5-13）快速响应价格变化，适合入场信号
较长周期（21-34+）帮助识别主要趋势方向
在不同图表上一致地为MA配色，以获得更好的视觉识别
结合价格行为和成交量进行确认
技术详情：
使用Pine Script v6编写
覆盖指标（显示在价格图表上）
轻量高效
Mozilla Public License 2.0开源
不会重绘
默认设置：
MA1: EMA(5) - 黄色 (#f6c309)
MA2: EMA(13) - 橙色 (#fb9800)
MA3: EMA(21) - 深橙色 (#fb6500)
MA4: EMA(34) - 红色 (#f60c0c)
该指标非常适合需要简单、可靠且高度可定制的移动平均线解决方案的交易者。
TMT Alpha Trend TrackerFunction: Binary direction engine using a volatility‑weighted baseline.
Objective: Provide an ‘on/off’ directional state for tactics and risk.
Interpretation: Flip to Up enables long‑side plays; Flip to Down enables short‑side plays only. Best used in combination with the Technical Event Model (TEM) to determine whether market conditions are trend-ready or non-trending, helping filter out flip signals during unsuitable volatility regimes.
TMT %C Original IIPercent C (Contraction ) has been part of the TMT toolkit since the 1990s. It was developed to measure how much of a market’s potential range is being used — not in points or direction, but in effort. It reflects volatility utilization, the fuel behind movement. Percent C measures how tightly price is using its available range. When Percent C is high, price action is compressed and efficient — energy is wound up like a spring. The market is trend-ready and capable of sustained movement. When Percent C is low, price has already traveled inefficiently across its range — the move is extended, momentum is spent, and the trend is vulnerable to stalling or reversal. Direction matters: When Percent C is ascending, price behavior is becoming choppier and less directional. When Percent C is descending, price behavior is becoming more directional and trend-dominant.
PK Scalper Pro Neon Cloud Killzone Dashboard 📌 Overview
PK Scalper Pro — Neon Cloud + Killzone Dashboard (JST) combines a Wilders ATR trail,
Fibonacci entry zones, session/killzone context, and a 7-factor environment score
to form a dynamic trend-following scalping strategy.
It adapts in real time to volatility, aiming for higher entry precision and optimized risk.
⚠️ For educational and research purposes only. Past performance does not guarantee future results.
🎯 Strategy Objectives
React quickly to sharp moves and reversals while using hysteresis (bar confirmation)
to suppress noise and deliver stable scalping signals.
✨ Key Features
Neon Cloud visualization (Full / Entry / Premium-Discount / Fib Bands / Upper / Middle / Lower modes)
7-factor scalping score (ATR compression / ADX / Volume / Candle range / Range compression / RSI / BB width)
— quantified 0–10 to measure environment suitability
Stable state machine combining Sensitivity × Stability (confirmation bars)
to determine start/end states reliably
📊 Trading Rules
Long Entry:
Trend = +1 and price <= f2 (78.6%), with is_scalping_time = true
Optimal zone: between f3 (88.6%) and l100 (trail); automatic “Fib Entry (Long)” label
Short Entry:
Trend = −1 and price >= f2 (78.6%), with is_scalping_time = true
Optimal zone: between f3 and l100; automatic “Fib Entry (Short)” label
Exit / Reversal:
Reverse or close on Trend crossover/crossunder
When is_scalping_time = false is confirmed, prioritize taking profit
💰 Risk Management Parameters
Recommended timeframes: 1–15m (FX / Indices / Crypto)
Example: Account $10,000 / Commission 0.02% / Slippage 1.0 pips / Risk 1% per trade
SL = ATR(14) × 1.5, TP = SL × Target R:R (default 2.0)
⚙️ Trading Parameters & Considerations
ATRPeriod = 200 / ATRFactor = 8 / trailType = "modified"
Sensitivity = "Medium" (entry ≈6, exit ≈4) / Stability = "Normal" (confirmation bars = 3)
Fibonacci: ex↔trail range → f1=61.8, f2=78.6, f3=88.6, eq=50, l100=trail
Killzone shown in JST; priority order NY > LDN > TKY, with remaining time countdown
🖼 Visual Support
Highlights optimal zone (f3→100%) and Premium/Discount areas; PRIME conditions shown with purple background
Dashboard displays direction 📈/📉, score, confirmation progress, Killzone (JST), TP/SL guidance, and Session info
🔧 Strategy Improvements & Uniqueness
Introduces a 7-factor score + hysteresis to quantify and stabilize “enter/stop” conditions
Defines precise deep pullback zone (88.6–100%) as optimal entry area
Neon multi-layer cloud + fixed-row dashboard for high visibility and live stability
✅ Summary
PK Scalper Pro integrates momentum (Trend), volatility adjustment (ATR), and multi-factor scoring
into a responsive scalping framework.
Its clear visuals and practical design improve reproducibility and decision confidence.
⚠️ No guarantee of future profits — always apply disciplined position sizing and risk management.
RSI Divergence DetectorThis indicator is designed to pinpoint high-probability reversal zones by identifying RSI Divergences, which occur when the momentum of the Relative Strength Index (RSI) fails to mirror price action. It automatically scans the charts for Bullish Divergences (where price makes a lower low but the RSI forms a higher low) and Bearish Divergences (where price hits a higher high while the RSI settles for a lower high), providing clear visual labels directly on the candles. By filtering for these discrepancies—especially when the RSI is in oversold (<30) or overbought (>70) territory—the tool helps traders filter out market noise and anticipate potential trend shifts before they manifest in price.
Quantum Fib & Liquidity Engine (With DashBoard)Quantum Fib & Liquidity Engine is a structural Fibonacci and liquidity map with an integrated information dashboard, designed for discretionary traders who rely on market structure rather than fixed, manual fibs.
Core Logic
ZigZag Swing Detection
Uses ta.pivothigh/ta.pivotlow with a configurable Structure Lookback to detect meaningful swing highs (resistance) and swing lows (support) on any timeframe.
Dynamic Fibonacci Framework
Automatically anchors 0% and 100% to the most recent swing pair and computes 38.2%, 50.0%, 61.8%, and 78.6% levels. The levels update only when a new structural pivot is confirmed, so the fib stays attached to the current leg rather than jumping on every minor fluctuation.
Golden Zone Highlight
Visually emphasizes the 50–61.8% “Golden Zone” with a translucent box, supporting mean‑reversion and continuation setups.
Support & Resistance Overlay
Plots current swing‑based support and resistance as dashed levels that extend forward, providing a clean structural map above and below price.
Liquidity & Pattern Layer
Optional liquidity pool lines at recent swing highs/lows, with sweep detection when price takes the level.
Double Top / Double Bottom detection around prior pivots for classic reversal structures.
Quantum Dashboard
A compact top‑right panel summarizing the key context from the indicator:
Current trend bias (uptrend / downtrend from swing structure)
Latest Resistance and Support prices
Golden Zone price range (50–61.8%)
Current price location relative to the fib leg (above 0%, below 100%, or inside range)
Status flag indicating whether price is currently inside the Golden Zone (Active / Waiting)
The dashboard is purely informational (no orders) and is intended to support your own entry/exit rules.
Inputs / Configuration
Structure Lookback – controls pivot sensitivity (default 20)
Show Fibs / Golden Zone / Liquidity / Patterns / Dashboard – feature toggles
Glow Strength & Line Transparency – adjusts the neon styling and visual intensity
This tool is best suited for traders who want:
Automatically maintained Fibonacci structure across all timeframes
Clear, swing‑based S/R and liquidity context
A concise on‑chart “summary panel” to keep bias and key levels in view while managing trades.
Quantum Fib & Liquidity EngineQuantum Fib & Liquidity Engine
A dynamic Fibonacci retracement indicator that anchors to swing highs and lows using ZigZag pivot detection. Automatically identifies support/resistance levels and key retracement zones.
Core Functionality:
Dynamic Fibonacci Retracement System — Uses ZigZag pivot detection (ta.pivothigh/ta.pivotlow) to anchor retracement levels to the most recent swing high (resistance) and swing low (support). Updates when new pivots form, keeping levels aligned with market structure.
Golden Zone Identification — Highlights the 50%-61.8% retracement zone, a common reversal area.
Support & Resistance Detection — Displays current S/R levels as horizontal dashed lines, updated from ZigZag pivots.
Liquidity Pool Analysis — Identifies significant liquidity zones and detects sweeps when price crosses these levels.
Pattern Recognition — Detects Double Top and Double Bottom patterns with configurable tolerance.
Multi-Timeframe Compatibility — Functions across 1m, 5m, 15m, 1h, 4h, daily, and higher timeframes using a consistent pivot detection algorithm.
Technical Implementation:
The indicator uses ZigZag pivot analysis to identify swing points. Fibonacci levels are calculated from the most recent swing high and swing low, ensuring alignment with market structure rather than arbitrary price ranges. Drawing objects are updated dynamically to maintain accuracy without excessive object creation.
Configuration Options:
Structure Lookback — Controls swing detection sensitivity (default: 20 bars)
Feature Toggles — Enable/disable Golden Zone, Liquidity Pools, and Pattern Detection
Visual Customization — Adjust glow intensity and line transparency
Use Cases:
Identifying potential reversal zones within retracements
Locating support and resistance levels
Detecting liquidity sweeps and pattern formations
Multi-timeframe analysis
Designed for traders who require dynamic Fibonacci levels that adapt to market structure.
Harmonic Oscillator - Multi-Component Momentum ConsensusHarmonic Oscillator - Multi-Component Momentum Consensus
Harmonic Oscillator is a seven-component momentum analysis system that transforms standard oscillators into a unified consensus framework. The indicator combines RSI, Stochastic RSI, MACD, EMA Trend, Momentum, Volume, and Divergence Zone detection into a single composite oscillator with automatic regime classification and qualified voting.
Rather than monitoring multiple separate indicators, traders can observe how these momentum calculations align or diverge through a single panel displaying vote count (X/7), regime state (TRENDING/BIAS/RANGING), and a normalized composite line.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔶 𝗢𝗩𝗘𝗥𝗩𝗜𝗘𝗪
Traditional momentum analysis often requires monitoring multiple oscillators simultaneously: RSI for momentum strength, Stochastic for extreme zones, MACD for trend-following momentum, and so on. Each indicator has its own scale, its own interpretation rules, and its own blind spots.
Harmonic Oscillator addresses this by implementing a voting system where seven independent components each cast a vote based on their specific criteria. The indicator then:
• Counts votes to show consensus level (displayed as X/7)
• Blends three oscillators into a single normalized composite line (0-100 scale)
• Classifies market regime based on composite position and baseline confirmation
• Detects divergences between price structure and oscillator structure
• Filters signals through optional higher timeframe trend alignment
The result is a unified view of momentum conditions that may help traders identify when multiple factors are agreeing versus conflicting.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔶 𝗛𝗢𝗪 𝗜𝗧 𝗪𝗢𝗥𝗞𝗦
The indicator is built around one core principle: momentum readings are more meaningful when multiple independent calculations agree.
𝗧𝗵𝗲 𝗦𝗲𝘃𝗲𝗻 𝗩𝗼𝘁𝗶𝗻𝗴 𝗖𝗼𝗺𝗽𝗼𝗻𝗲𝗻𝘁𝘀
Each component analyzes a different aspect of momentum and casts a bullish, bearish, or neutral vote:
𝟭. 𝗥𝗦𝗜 (𝗠𝗼𝗺𝗲𝗻𝘁𝘂𝗺-𝗔𝘄𝗮𝗿𝗲)
What it does: RSI is calculated with additional RMA smoothing to reduce noise. The voting logic requires both threshold position AND slope confirmation. RSI must be above 50 with rising slope to vote bullish, or below 50 with falling slope to vote bearish. Special conditions detect potential reversals (RSI below 30 but rising).
How to interpret it: A green RSI arrow in the panel indicates bullish momentum with directional confirmation. A red arrow indicates bearish. Gray dash means RSI is not showing clear directional conviction.
𝟮. 𝗦𝘁𝗼𝗰𝗵𝗮𝘀𝘁𝗶𝗰 𝗥𝗦𝗜 (𝗦𝗹𝗼𝗽𝗲 𝗔𝗻𝗮𝗹𝘆𝘀𝗶𝘀)
What it does: Stochastic RSI uses EMA smoothing on K and D lines for stability. The vote requires K-line momentum alignment: K above D with positive slope for bullish, K below D with negative slope for bearish.
How to interpret it: This component captures turning points in momentum. When SRSI votes while RSI doesn't (or vice versa), it may indicate the oscillators are at different phases of a move.
𝟯. 𝗠𝗔𝗖𝗗 (𝗛𝗶𝘀𝘁𝗼𝗴𝗿𝗮𝗺 𝗔𝗰𝗰𝗲𝗹𝗲𝗿𝗮𝘁𝗶𝗼𝗻)
What it does: Rather than voting on histogram direction alone, MACD votes on histogram acceleration, which is the rate of change of the histogram. This approach aims to identify momentum shifts before the histogram crosses zero.
How to interpret it: MACD acceleration can signal momentum changes early. A bullish vote means histogram is positive and accelerating, OR negative but accelerating upward.
𝟰. 𝗘𝗠𝗔 𝗧𝗿𝗲𝗻𝗱 (𝗣𝗼𝘀𝗶𝘁𝗶𝗼𝗻 + 𝗦𝗹𝗼𝗽𝗲)
What it does: Requires both price position relative to EMA AND slope confirmation. Price above EMA with positive EMA slope = bullish vote. Price below EMA with negative slope = bearish vote.
How to interpret it: This prevents votes in ambiguous situations where price is above a falling EMA or below a rising EMA. The EMA vote indicates clear trend alignment.
𝟱. 𝗠𝗼𝗺𝗲𝗻𝘁𝘂𝗺 (𝗥𝗮𝘁𝗲 𝗼𝗳 𝗖𝗵𝗮𝗻𝗴𝗲)
What it does: Uses smoothed Rate of Change (ROC) with the same qualification requirement: ROC positive AND increasing for bullish, ROC negative AND decreasing for bearish.
How to interpret it: Pure momentum measurement. When MOM agrees with trend components, directional conviction may be higher.
𝟲. 𝗩𝗼𝗹𝘂𝗺𝗲 (𝗖𝗼𝗻𝗳𝗶𝗿𝗺𝗮𝘁𝗶𝗼𝗻)
What it does: Compares current volume to recent average. Votes bullish when volume is elevated (1.2x+ average) on an up candle. Votes bearish when elevated volume accompanies a down candle.
How to interpret it: Volume confirmation adds weight to directional moves. Low volume readings during directional moves may indicate less conviction.
𝟳. 𝗗𝗶𝘃𝗲𝗿𝗴𝗲𝗻𝗰𝗲 𝗭𝗼𝗻𝗲
What it does: Detects when price and oscillator are in extreme zones with structural disagreement. Votes bullish when oscillator is oversold but price is making higher lows. Votes bearish when oscillator is overbought but price is making lower highs.
How to interpret it: This component specifically looks for potential reversal setups where momentum and price structure are disagreeing.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔶 𝗪𝗛𝗬 𝗧𝗛𝗘𝗦𝗘 𝗖𝗢𝗠𝗣𝗢𝗡𝗘𝗡𝗧𝗦 𝗪𝗢𝗥𝗞 𝗧𝗢𝗚𝗘𝗧𝗛𝗘𝗥
The seven components are designed to capture different aspects of momentum:
1. 𝗥𝗦𝗜 + 𝗦𝘁𝗼𝗰𝗵𝗮𝘀𝘁𝗶𝗰 𝗥𝗦𝗜: Two approaches to measuring momentum strength and turning points
2. 𝗠𝗔𝗖𝗗 + 𝗠𝗼𝗺𝗲𝗻𝘁𝘂𝗺: Trend-following momentum and pure rate of change
3. 𝗘𝗠𝗔 𝗧𝗿𝗲𝗻𝗱: Price position relative to moving average with slope confirmation
4. 𝗩𝗼𝗹𝘂𝗺𝗲: Participation confirmation on directional moves
5. 𝗗𝗶𝘃𝗲𝗿𝗴𝗲𝗻𝗰𝗲 𝗭𝗼𝗻𝗲: Structural disagreement detection in extreme zones
When multiple factors align (RSI slope confirms, MACD accelerates, EMA trend agrees, volume confirms), this represents broad momentum agreement. Such conditions may warrant attention, though they do not guarantee any particular outcome.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔶 𝗛𝗢𝗪 𝗧𝗢 𝗨𝗦𝗘
This section provides step-by-step guidance for interpreting the indicator's visual elements.
𝗦𝘁𝗲𝗽 𝟭: 𝗖𝗵𝗲𝗰𝗸 𝘁𝗵𝗲 𝗥𝗲𝗴𝗶𝗺𝗲 𝗖𝗹𝗮𝘀𝘀𝗶𝗳𝗶𝗰𝗮𝘁𝗶𝗼𝗻
The regime label at the top of the status panel provides immediate market context:
• TRENDING ▲ or TRENDING ▼: Composite oscillator at extremes (above 65 or below 35) with 200 EMA baseline confirming direction. This may indicate sustained directional momentum.
• BIAS ▲ or BIAS ▼: Composite showing moderate lean (above 55 or below 45) without extreme readings. Directional tendency without full momentum extension.
• RANGING: Composite near midpoint (45-55 zone). This may indicate consolidation, indecision, or transition between directional moves.
The regime classification helps contextualize other readings. A high vote count during TRENDING may indicate trend continuation. The same vote count during RANGING may indicate an emerging directional move.
𝗦𝘁𝗲𝗽 𝟮: 𝗢𝗯𝘀𝗲𝗿𝘃𝗲 𝘁𝗵𝗲 𝗩𝗼𝘁𝗲 𝗖𝗼𝘂𝗻𝘁
The vote count (displayed as X/7) shows how many components currently agree:
• 6/7 or 7/7: High consensus. Most or all components showing directional agreement through their different calculation methods.
• 4/7 or 5/7: Moderate consensus. Majority agreement with some components neutral or conflicting.
• 1/7 to 3/7: Low consensus. Components are in disagreement or showing mixed readings.
The consensus meter bar at the bottom of the oscillator panel also visualizes this. Brighter colors indicate higher consensus.
𝗦𝘁𝗲𝗽 𝟯: 𝗥𝗲𝗮𝗱 𝘁𝗵𝗲 𝗖𝗼𝗺𝗽𝗼𝘀𝗶𝘁𝗲 𝗢𝘀𝗰𝗶𝗹𝗹𝗮𝘁𝗼𝗿
The main oscillator line blends RSI, Stochastic RSI, and MACD using winsorized normalization:
• Above 75 zone: Extended bullish momentum (overbought region)
• Above 85 zone: Extreme overbought
• Below 25 zone: Extended bearish momentum (oversold region)
• Below 15 zone: Extreme oversold
• 45-55 zone: Neutral/consolidation area
The signal line (thinner line) provides crossover reference. When composite crosses above signal = bullish momentum shift. Below = bearish shift.
Important: Like all oscillators, the composite can remain at extremes during strong directional moves. Overbought does not mean "sell"; it means momentum is extended.
𝗦𝘁𝗲𝗽 𝟰: 𝗖𝗵𝗲𝗰𝗸 𝗜𝗻𝗱𝗶𝘃𝗶𝗱𝘂𝗮𝗹 𝗖𝗼𝗺𝗽𝗼𝗻𝗲𝗻𝘁𝘀
The status panel shows each component's current vote with arrows:
• ▲ (green): Component voting bullish
• ▼ (red): Component voting bearish
• — (gray): Component neutral/no vote
This breakdown helps identify which factors are agreeing and which are diverging. For example, if RSI and SRSI show bullish but MACD shows bearish, momentum may be mixed.
𝗦𝘁𝗲𝗽 𝟱: 𝗪𝗮𝘁𝗰𝗵 𝗳𝗼𝗿 𝗗𝗶𝘃𝗲𝗿𝗴𝗲𝗻𝗰𝗲𝘀
Divergence labels appear when price and oscillator structure disagree:
• ▲ DIV (bullish): Price makes lower low, oscillator makes higher low. Appears only in oversold zone (below 25).
• ▼ DIV (bearish): Price makes higher high, oscillator makes lower high. Appears only in overbought zone (above 75).
Divergences indicate structural disagreement that may precede reversals. However, divergences can persist or resolve without reversal. They are one input for analysis, not standalone signals.
𝗦𝘁𝗲𝗽 𝟲: 𝗖𝗼𝗺𝗯𝗶𝗻𝗲 𝗠𝘂𝗹𝘁𝗶𝗽𝗹𝗲 𝗙𝗮𝗰𝘁𝗼𝗿𝘀
The indicator provides the most context when multiple elements align:
Example Scenario A (Trend Continuation):
Composite holding above 65 for eight bars. Regime reads TRENDING▲, votes at 6/7, no divergence labels. The oscillator hasn't touched the 85 extreme zone yet. Components are aligned with room to extend before reaching overbought conditions.
Example Scenario B (Momentum Fading):
Regime shows BIAS▼ during a two-day selloff. But votes just dropped from 5/7 to 3/7, and the composite crossed above the signal line. The regime label says bearish while components are losing agreement. This type of disconnect often appears before moves stall or reverse.
Example Scenario C (Exhaustion Warning):
After a rally, composite hits 87 in the extreme zone. A ▼ DIV label appears. Votes drop from 7/7 to 4/7 over three bars. None of this guarantees reversal, but multiple warning signs appearing together (extreme reading, divergence, falling consensus) suggest caution.
Example Scenario D (Breakout From Consolidation):
Regime has shown RANGING for two days, composite hovering 48-52, votes stuck at 2/7 to 3/7. Then regime flips to BIAS▲, votes jump to 5/7, composite breaks above 55. When all three shift together after a quiet period, consolidation may be resolving into a directional move.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔶 𝗡𝗔𝗩𝗜𝗚𝗔𝗧𝗜𝗡𝗚 𝗗𝗜𝗙𝗙𝗘𝗥𝗘𝗡𝗧 𝗠𝗔𝗥𝗞𝗘𝗧 𝗖𝗢𝗡𝗗𝗜𝗧𝗜𝗢𝗡𝗦
𝗧𝗿𝗲𝗻𝗱𝗶𝗻𝗴 𝗠𝗮𝗿𝗸𝗲𝘁𝘀
In trending conditions, traders may observe the regime classification showing "TRENDING" with baseline confirmation, composite remaining in the upper or lower half of the range, and high consensus readings (5-7 votes) persisting across multiple bars. The qualification requirements help maintain agreement during trends. A sustained move where RSI stays above 50 with positive slope, MACD histogram accelerates, and EMA slope confirms will show consistent directional votes. Divergences may appear in extreme zones but may not resolve immediately during strong trends.
𝗥𝗮𝗻𝗴𝗶𝗻𝗴 𝗠𝗮𝗿𝗸𝗲𝘁𝘀
In ranging or consolidating conditions, the regime classification will often show "RANGING" or alternate between brief directional readings. The composite typically oscillates around the 50 line without reaching sustained extremes, and vote counts fluctuate without reaching high consensus for extended periods. Divergences appearing at range extremes may be more significant in these conditions, potentially indicating range boundaries.
𝗛𝗶𝗴𝗵 𝗩𝗼𝗹𝗮𝘁𝗶𝗹𝗶𝘁𝘆 𝗘𝘃𝗲𝗻𝘁𝘀
During high volatility events, components may respond rapidly to price changes. Vote counts can swing from high bullish to high bearish consensus quickly. The regime classification helps contextualize whether these swings are occurring within a larger trending structure or representing genuine momentum reversals. The composite may reach extreme zones (85+ or 15-) during volatility spikes.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔶 𝗧𝗘𝗖𝗛𝗡𝗜𝗖𝗔𝗟 𝗗𝗘𝗧𝗔𝗜𝗟𝗦
• Normalization uses winsorized statistics: extreme values are clipped before scaling to prevent outliers from dominating the composite blend
• Qualification logic requires directional confirmation (slope, acceleration) beyond simple threshold positions
• Divergence detection uses pivot comparison with left/right bar lookback, filtered to extreme zones only
• Regime classification combines composite position thresholds with 200 EMA slope direction
• HTF data uses confirmed bars only with request.security() lookahead disabled
• All signals fire on bar close only (non-repainting): historical display matches live behavior
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔶 𝗨𝗡𝗜𝗤𝗨𝗘 𝗙𝗘𝗔𝗧𝗨𝗥𝗘𝗦
• 𝗦𝗲𝘃𝗲𝗻-𝗖𝗼𝗺𝗽𝗼𝗻𝗲𝗻𝘁 𝗩𝗼𝘁𝗶𝗻𝗴: Each component uses qualification criteria beyond simple thresholds, reducing noise from single-indicator false signals
• 𝗤𝘂𝗮𝗹𝗶𝗳𝗶𝗲𝗱 𝗩𝗼𝘁𝗲𝘀: Components only vote when showing directional conviction (slope confirmation, acceleration, etc.), not just static positions
• 𝗖𝗼𝗺𝗽𝗼𝘀𝗶𝘁𝗲 𝗡𝗼𝗿𝗺𝗮𝗹𝗶𝘇𝗮𝘁𝗶𝗼𝗻: Three oscillators blended using winsorized statistics for a smoother, more stable reading than any single oscillator
• 𝗔𝘂𝘁𝗼𝗺𝗮𝘁𝗶𝗰 𝗥𝗲𝗴𝗶𝗺𝗲 𝗗𝗲𝘁𝗲𝗰𝘁𝗶𝗼𝗻: TRENDING/BIAS/RANGING classification provides immediate market context
• 𝗛𝗧𝗙 𝗗𝗶𝘃𝗲𝗿𝗴𝗲𝗻𝗰𝗲 𝗙𝗶𝗹𝘁𝗲𝗿: When enabled, divergence signals are filtered by higher timeframe trend direction to reduce counter-trend noise
• 𝗡𝗼𝗻-𝗥𝗲𝗽𝗮𝗶𝗻𝘁𝗶𝗻𝗴: All calculations use confirmed bar data only. Historical display matches what was shown in real-time.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔶 𝗦𝗘𝗧𝗧𝗜𝗡𝗚𝗦 𝗢𝗩𝗘𝗥𝗩𝗜𝗘𝗪
𝗖𝗼𝗿𝗲 𝗦𝗲𝘁𝘁𝗶𝗻𝗴𝘀
• 𝗦𝗶𝗴𝗻𝗮𝗹 𝗠𝗼𝗱𝗲: Alert threshold only (no visual change). Controls when High Consensus alerts fire:
- Conservative = 6+ votes to trigger alert
- Balanced = 5+ votes (default)
- Aggressive = 4+ votes
• 𝗛𝗧𝗙 𝗙𝗶𝗹𝘁𝗲𝗿: When enabled, divergence signals are filtered by higher timeframe trend. Bullish divergences only appear when HTF is bullish (price above HTF EMA). Bearish divergences only appear when HTF is bearish. Helps avoid counter-trend signals.
• 𝗛𝗧𝗙 𝗧𝗶𝗺𝗲𝗳𝗿𝗮𝗺𝗲: Timeframe used for HTF filter (default 4H). The indicator checks if price is above/below the 50 EMA on this timeframe.
𝗗𝗶𝘀𝗽𝗹𝗮𝘆 𝗦𝗲𝘁𝘁𝗶𝗻𝗴𝘀
• Show Divergences: Toggle divergence labels on/off
• Show Consensus Meter: Toggle vote count bar at bottom of oscillator
• Show Status Panel: Toggle the info table
• Show OB/OS Zone Fills: Toggle colored fill zones for extreme areas
𝗧𝗮𝗯𝗹𝗲 𝗦𝗲𝘁𝘁𝗶𝗻𝗴𝘀
• Table Position: 9 position options (corners, centers, edges)
• Table Font Size: Tiny/Small/Normal
• Table Layout: Horizontal (wide, desktop) or Vertical (compact, mobile-friendly)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔶 𝗔𝗟𝗘𝗥𝗧𝗦
14 alert conditions available:
𝗗𝗶𝘃𝗲𝗿𝗴𝗲𝗻𝗰𝗲 𝗔𝗹𝗲𝗿𝘁𝘀
• Bullish Divergence / Bearish Divergence: Divergence detected in extreme zone
• Any Divergence: Either type detected
𝗖𝗿𝗼𝘀𝘀𝗼𝘃𝗲𝗿 𝗔𝗹𝗲𝗿𝘁𝘀
• Bullish Crossover / Bearish Crossover: Composite crosses signal line
• Any Crossover: Either type detected
𝗘𝘅𝘁𝗿𝗲𝗺𝗲 𝗭𝗼𝗻𝗲 𝗔𝗹𝗲𝗿𝘁𝘀
• Extreme Overbought / Extreme Oversold: Composite enters 85/15 zones
• Exit Overbought / Exit Oversold: Composite exits 85/15 zones
𝗥𝗲𝗴𝗶𝗺𝗲 𝗔𝗹𝗲𝗿𝘁𝘀
• Regime to Bullish / Regime to Bearish: Regime classification changes direction
𝗖𝗼𝗻𝘀𝗲𝗻𝘀𝘂𝘀 𝗔𝗹𝗲𝗿𝘁𝘀
• High Bull Consensus / High Bear Consensus: Vote count reaches Signal Mode threshold (6+/5+/4+ depending on mode). Alert only, no visual change.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔶 𝗟𝗜𝗠𝗜𝗧𝗔𝗧𝗜𝗢𝗡𝗦
• 𝗔𝗻𝗮𝗹𝘆𝘀𝗶𝘀 𝘁𝗼𝗼𝗹, 𝗻𝗼𝘁 𝗮 𝘀𝗶𝗴𝗻𝗮𝗹 𝗴𝗲𝗻𝗲𝗿𝗮𝘁𝗼𝗿: This indicator displays consensus, regime state, and divergences for the trader to interpret. It does not tell you when to buy or sell.
• 𝗖𝗼𝗻𝘀𝗲𝗻𝘀𝘂𝘀 𝗰𝗮𝗻 𝗹𝗮𝗴: By the time all components agree, price movement may have already begun. High consensus readings indicate current agreement, not future direction.
• 𝗘𝘅𝘁𝗿𝗲𝗺𝗲𝘀 𝗰𝗮𝗻 𝗽𝗲𝗿𝘀𝗶𝘀𝘁: Like all oscillators, the composite can remain at extremes during strong directional moves. Overbought does not mean "must reverse."
• 𝗗𝗶𝘃𝗲𝗿𝗴𝗲𝗻𝗰𝗲𝘀 𝗮𝗿𝗲 𝗻𝗼𝘁 𝗴𝘂𝗮𝗿𝗮𝗻𝘁𝗲𝗲𝗱: Divergences indicate structural disagreement. They may precede reversals but can also persist or resolve without reversal.
• 𝗟𝗮𝗴𝗴𝗶𝗻𝗴 𝗶𝗻𝗱𝗶𝗰𝗮𝘁𝗼𝗿: All signals are derived from historical price data and confirm on bar close.
• 𝗣𝗮𝘀𝘁 𝗽𝗮𝘁𝘁𝗲𝗿𝗻𝘀 𝗱𝗼 𝗻𝗼𝘁 𝗴𝘂𝗮𝗿𝗮𝗻𝘁𝗲𝗲 𝗳𝘂𝘁𝘂𝗿𝗲 𝗿𝗲𝘀𝘂𝗹𝘁𝘀.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔶 𝗖𝗢𝗡𝗖𝗟𝗨𝗦𝗜𝗢𝗡
Harmonic Oscillator provides a structured framework for analyzing momentum through seven independent components, a normalized composite oscillator, and automatic regime classification. The indicator is designed to help traders identify when multiple momentum factors are agreeing versus conflicting, which may provide useful context for analysis.
The voting system, qualification requirements, and regime detection work together to present a unified view of momentum conditions that would otherwise require monitoring multiple separate indicators.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔶 𝗗𝗜𝗦𝗖𝗟𝗔𝗜𝗠𝗘𝗥
Trading is risky and most traders lose money. This indicator is provided for informational and educational purposes only. It does not constitute financial advice, and past performance does not guarantee future results. All content, tools, and analysis should not be considered as recommendations to buy or sell any asset. Users are solely responsible for their own trading decisions. Always use proper risk management and consider consulting a qualified financial advisor before making trading decisions.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Built with PineScript v6. Non-repainting. All signals confirmed on bar close.
Professional Bar Market + Footprint OrderFlowBar Market + Order Flow Footprint – See Balance, Rotation, and Real Aggression Inside Each Bar
The Bar Market + Order Flow Footprint Indicator is built for traders who want to see where the auction is balanced, when it’s about to break, and who is actually in control at each step. It combines professional Bar Market detection with real‑time, footprint‑style order flow analysis directly on your TradingView chart.
Core edge: balance + order flow
Bar Market detection and visualization
Automatically identifies balanced, rotational “bar market” environments using overlap, volatility contraction, and structure neutrality.
Visually marks balance zones with boxes, shaded regions, or range boundaries so compression stands out instantly on any chart.
Clearly shows when price enters balance, rotates inside it, and when it finally breaks out or fails and returns to balance.
Embedded footprint‑style data on every candle
Estimates buy vs sell pressure per bar to approximate a professional order flow footprint within Pine Script limits.
Displays bar‑level delta, volume intensity, and imbalance conditions to reveal whether aggressive buyers or sellers are dominating.
Highlights absorption and exhaustion so you can spot trapped traders and fading momentum at key levels.
Focused order flow inside balance
Emphasizes order flow behavior inside Bar Markets, where rotation, absorption, and stop runs set up the next expansion.
Calls out absorption at range extremes, delta divergence before breakouts, and failed breaks that snap back into balance.
Optionally reduce noise outside balance zones, so you only see detailed footprint data where it matters most.
Flexible customization for different traders
Tune Bar Market logic with sensitivity, lookback, and minimum balance duration controls.
Adjust volume smoothing and delta calculation method to match your order flow style.
Toggle footprint visibility, select light vs detailed performance modes, and customize all colors and label sizes for maximum clarity.
Designed for futures, forex, crypto, and indices, this tool helps you read balance, transitions, and aggression in one unified view — ideal for intraday traders who combine auction market theory with modern order flow.
⚠️ Disclaimer: For educational and analytical purposes only and does not constitute financial advice. Always apply proper risk management and confirm signals using additional analysis.
Enigma DaytradingThis indicator contains integrated databases for 3 instruments (GC, 6B, and CL) to be used only in the New York session. These integrated databases enable the visualization of key price levels associated with either the continuation of the current trend or with the mitigation of Internal Range Liquidity within the session (displayed as colored boxes), along with their corresponding liquidity draws (displayed as colored lines).
The basic logic is to consider the colored boxes as potential entry areas and the colored lines as potential exit levels. Which colored line to use as a potential exit level will be determined by which colored box was used in the first place. The colors of both the entry box and the exit line should be the same.
This visualization system and the methodology to structure the integrated databases are the result of proprietary analysis of historical price data and recurring patterns.
Every trade setup presented by the usage of this indicator doesn't constitute investment advice. Past results will never guarantee future performance.
Modular OmniTrendOverview
Modular OmniTrend Pro 2026 is a sophisticated, trend-following trading indicator designed for traders who value precision and multi-layer confirmation. Unlike standard indicators, this system utilizes a "modular confluence" engine, requiring multiple technical conditions—momentum, trend direction, and market participation—to align before issuing a signal.
The core philosophy of this script is to eliminate market noise and capture high-probability swings by filtering out low-liquidity movements.
Key Features
Modular Architecture: Toggle between various trend-detection methods (EMA, WMA, HMA, DEMA) and confirmation layers (MACD, Parabolic SAR, ADX).
Volume-Validated Entries: Built-in volume analysis ensures that every signal is backed by real market interest, protecting you from "fake-outs" during low-volume periods.
Visualization: A clean UI that colors candles based on overall trend health and provides a dynamic "magnetic field" fill for immediate trend identification.
How to Use & Set Up Alerts
Setting Alerts: :
- Long Entry Signal: Triggers when bullish conditions align.
- Short Entry Signal: Triggers when bearish conditions align (if "Both" directions are enabled).
State Logic: The indicator remembers its state. It won't give a new Long signal until the bearish conditions have reset the cycle, ensuring cleaner entries.
Best Performance
Optimized for ETHUSD INDEX, 4H Timeframe to filter out intraday noise.
Volume Required: As this system uses Volume Confirmation, it is strictly intended for pairs with reliable volume data (Exchanges like Binance, Kraken, Coinbase).
Disclaimer: Trading involves significant risk. This indicator is a technical tool and does not constitute financial advice. Past performance is not indicative of future results.
BOS 5m Session (NY Time)BOS (Break of Structure) indicator designed for strict 5-minute intraday trading.
The script identifies valid swing structures using a strict two-candle pattern (bullish → bearish for highs, bearish → bullish for lows) and tracks breaks only by candle close.
Key features:
• Works exclusively on the 5-minute timeframe
• Fixed New York time zone
• Session modes: Asia, London, New York, and ALL
• ALL mode resets at the end of New York main session (17:00 NY)
• Trend-only logic — only one BOS line is displayed at a time
• No repainting, no doji logic, no extra signals
• Visual customization (colors, width, line length)
Custom versions:
If you are interested in a custom version (additional filters, alerts, different logic, or private access), feel free to contact me directly.
Wyckoff Cycle Detection ProWyckoff Market Structure Indicator | Full Cycle Detection
Overview
The Wyckoff Market Structure Indicator automatically detects and visualizes the complete Wyckoff market cycle in real time. It identifies Accumulation, Markup, Distribution, and Markdown, including Re-Accumulation and Re-Distribution, and displays each phase directly on the chart using colored phase boxes, support/resistance lines, and Wyckoff event labels.
Built to reflect how markets actually behave, this indicator uses adaptive, non-rigid logic to capture Wyckoff structures even when price action does not look textbook-perfect.
Key Features
✔ Automatic Wyckoff cycle detection
✔ Accumulation, Markup, Distribution, Markdown
✔ Re-Accumulation & Re-Distribution support
✔ Colored boxes labeling each Wyckoff phase
✔ Dynamic support & resistance lines
✔ Dotted Automatic Rally (AR) extension line
✔ Real-time, non-repainting logic
✔ Optional toggle to show/hide past Wyckoff cycles
✔ Clean chart layout with minimal configuration
Wyckoff Events Detected
Accumulation
PS – Preliminary Support
SC – Selling Climax
AR – Automatic Rally
ST – Secondary Test
Spring / Shakeout (when present)
Test
SOS – Sign of Strength
LPS – Last Point of Support
BU – Back-Up to the Creek
Distribution
PSY – Preliminary Supply
BC – Buying Climax
AR – Automatic Reaction
ST – Secondary Test
UT / UTAD – Upthrust
SOW – Sign of Weakness
LPSY – Last Point of Supply
Labels appear only when market conditions reasonably support the Wyckoff logic, keeping signals contextual and practical.
How It Works
The indicator analyzes:
Price structure (swings and range behavior)
Volume expansion and contraction
Volatility (ATR-based behavior)
Trend context (prior markup or markdown)
This multi-factor approach allows the system to identify true institutional accumulation and distribution, not random consolidation.
Designed for Real Markets
Wyckoff structures are not identical every time. This indicator loosens rigid textbook rules and instead focuses on probability, context, and confirmation, making it effective across:
Forex
Stocks
Crypto
Futures
Any timeframe
How to Use
Add the indicator to your chart
Identify the current Wyckoff phase box
Use event labels for confirmation and context
Align trade decisions with the active phase
Enable past cycles for learning or backtesting (optional)
Who It’s For
Wyckoff Method traders
Market structure & price action traders
Swing & position traders
Traders seeking institutional context
Investors looking for accumulation/distribution zones
Important Notes
No repainting
No future-looking logic
Works out of the box
Designed to keep charts clean and readable
Disclaimer
This indicator is for educational and analytical purposes only and does not constitute financial advice. Always use proper risk management.
[Saga Trading] Order Flow Imbalance# Order Flow Imbalance Finder - Advanced Edition
## Overview
Professional order flow imbalance detector with intelligent auto-adaptation to any asset and timeframe. Identifies supply/demand imbalances (FVG) with precision filtering and real-time retest alerts.
## Key Features
### 🎯 Smart Asset Adaptation
- **Auto ATR Normalization**: Automatically adjusts to asset volatility
- **Dynamic Timeframe Detection**: Adapts analysis period based on chart timeframe
- **Universal Compatibility**: Works on forex, crypto, stocks, indices
### 📊 Volume Analysis
- **Auto Volume Detection**: Intelligent volume threshold based on volatility ratio
- **High Volume Highlights**: Visual markers (🔊) for significant volume imbalances
- **Manual Override**: Optional manual volume multiplier control
### 💪 Imbalance Strength Classification
- **Strong**: Solid border - Major gaps (>50-60% of candle range)
- **Medium**: Dashed border - Moderate gaps (25-35% of candle range)
- **Weak**: Dotted border - Minor gaps (<25% of candle range)
- **Strength Filter**: Display only desired strength levels
### 🚨 Smart Alerts
- Real-time alerts when price retests imbalance zones
- Distinguishes bullish vs bearish retest events
- Once-per-bar alert frequency to avoid spam
### 🎨 Visual Customization
- Bullish imbalances: Green zones
- Bearish imbalances: Red zones
- High volume zones: Enhanced transparency
- Adjustable maximum boxes displayed (default: 50)
## How It Works
Detects 3-candle imbalances where price gaps between candles, leaving unfilled zones. These zones often act as magnets for price action and represent institutional order flow inefficiencies.
## Settings
- **Chart Customization**: Max boxes, bull/bear colors
- **Volume Analysis**: Auto/manual volume detection
- **Alerts**: Enable/disable retest notifications
- **Imbalance Strength**: Filter by All/Weak/Medium/Strong
Perfect for scalpers, day traders, and swing traders seeking high-probability support/resistance zones.
Key Levels - Prop Trader JourneyKey Levels (Compact) is a clean, execution-focused key levels indicator built for intraday futures and price-action traders.
It plots the most important session-based levels in a compact right-side layout so your chart stays clear and decision-ready: RTH High/Low, Premarket High/Low, Opening Range, 1H levels, Session Open, Weekly levels, and averages.
Key Features:
Smart label collision handling: Merge / Stack / Merge+Stack
Compact and Pivot display modes
Fully customizable colors, line styles, widths, and label text
Session-aware logic (RTH vs Premarket vs Session Open)
Built for confluence and reaction-based trading (not prediction)
How to Use:
Treat levels as reaction zones: wait for rejection, hold, or break + retest.
When multiple labels merge/stack tightly, that’s often a stronger support/resistance zone (confluence).
Use Compact mode to stay clean, Pivot mode to see where each level was formed.
ES Gamma LevelsES Gamma Levels - Dynamic Options Flow Visualization
This indicator displays gamma exposure levels from SPY options data, automatically scaled to ES/MES futures prices. Simply copy gamma data from your dashboard and paste it into the indicator to see key support and resistance levels based on dealer positioning.
Features:
- Automatic SPY to ES price conversion using live 1-minute ratios
- Visual strength indicators - thicker/longer lines show stronger gamma concentrations
- Customizable colors for positive and negative gamma levels
- Dotted reference lines extending across the chart for easy price tracking
- Updates every minute to prevent chart clutter and jumping levels
- Filters to show only significant levels above your threshold
- Strongest positive and negative levels are automatically highlighted
The solid colored lines represent gamma strength - longer lines indicate higher concentration at that price level. Dotted lines provide continuous reference points across your chart. Green levels typically act as support (dealers long gamma), while red levels often act as resistance (dealers short gamma).
Best used on 1-5 minute timeframes for intraday trading. Paste fresh data from your options flow dashboard whenever you want updated levels.
Dealing Range Auto-Zone v2.1Dealing Range Auto-Zone v2.1 - Summary
Purpose: Automatically creates zone-based support/resistance levels within a dealing range using percentage-based spacing with ATR-driven recommendations.
How It Works:
Click two points to define dealing range (high and low)
Set step % (e.g., 0.25% = one zone every 0.25% move)
Indicator calculates exact zone count and draws upper/lower zone boundaries
Optional center lines show midpoint of each zone
Key Features:
Zone-based S/R - Upper and lower boundaries instead of single lines (creates "price zones" rather than precise levels)
Auto-calculated spacing - Uses exact % steps with math.round() for optimal coverage (minimizes gaps near boundaries)
Adjustable zone width - Default 50% of step (e.g., 0.25% step = 0.125% zone width on each side)
Ghost zones - Extends zones above/below range for anticipating breakouts
ATR-based recommendations - Calculates Daily ATR and suggests Tight/Balanced/Wide step % based on current volatility
Smart validation - Compares your step % to ATR recommendations and shows if it's appropriate for current market conditions
Use Case:
Converts dealing ranges into tradeable S/R zones for 15s-5m intraday scalping. Makes it clear when price is "in a zone" vs "at a precise line." Ideal for MNQ, MGC, and other liquid futures/crypto.
Version 2.1 Changes:
New Features:
Daily ATR calculation with automatic Tight/Balanced/Wide step % recommendations
Volatility-based auto-recommendations (compares ATR(14) vs ATR(50))
Smart validation system that evaluates your step % choice and provides feedback
Info table shows all three ATR recommendations (Tight/Balanced/Wide)
Improvements:
Changed from math.floor() to math.round() for zone count calculation (eliminates gaps near boundaries)
Streamlined info table (removed redundant rows: Range points, Step %, Total Lines)
Added color-coded validation (green checkmark for appropriate settings, orange warning for extreme values)
Bug Fixes:
Fixed tooltip compilation error (moved dynamic ATR data to info table only)
Corrected validation logic to properly categorize step % ranges
Info Table Now Shows:
Range % (dealing range size as %)
Exact Zones (calculated, including fractional)
Zones Drawn (rounded to nearest whole number)
Zone Width (in price points and % of step)
Daily ATR (value and %)
Auto Rec (all three recommendations: T/B/W)
Your Step (with validation: ✓ Tight/Balanced/Wide or ⚠️ Very Tight/Wide)
Float RotationThis is an indicator that plots the float rotation. Best used on the 5min chart. It is best if settings are set to 1 time period and on the columns graph. I use it with a 20 MA bounce strategy.
Ticker DataTicker Data is a high-efficiency dashboard designed for traders and analysts who need immediate context on a ticker without cluttering their chart.
This script aggregates fundamental data, price performance, and key institutional support levels into a single, customizable table. It allows you to assess the "character" of a stock in seconds by overlaying essential metrics directly onto your chart.
Key Features
1. Institutional Anchors (Auto-VWAPs)
Instead of manually drawing Anchored VWAPs for every ticker, this script automatically calculates and displays the three most important levels for trend management:
VWAP IPO: The volume-weighted average price since the stock's inception.
VWAP YTD: The volume-weighted average price starting from Jan 1st of the current year.
VWAP Earnings: The volume-weighted average price since the most recent earnings report.
Visual Logic: Text turns Green if price is above the VWAP, and Red if below.
2. Trend & Momentum
5-Day MA: Displays the 5-day Simple Moving Average based on Daily data. This serves as a "momentum guardrail"—if the price is above the 5DMA, short-term momentum is bullish.
Timeframe Independence: The 5DMA and performance stats are forced to the Daily timeframe, ensuring consistent data even if you view the chart on 15m or 1H intervals.
3. Fundamental Context
Market Cap: Current market capitalization.
Float & Float %: Displays the number of floating shares and the percentage of total shares they represent. Vital for gauging volatility potential (low float = higher volatility).
4. Price Performance & Range
Performance: % change over the last Week (1W), Month (1M), and Quarter (3M).
52-Week High/Low:
Off 52W High: The % drawdown from the 52-week high.
Above 52W Low: The % extension from the 52-week low.
5. Event & History Awareness
Earnings Countdown: Displays the number of days until the next earnings report. Text turns Red inside the "Danger Zone" (less than 7 days).
IPO Timer: Calculates exactly how many years have passed since the stock's public listing, allowing you to quickly filter for fresh merchandise vs. mature assets.
Settings & Customization
This script is built for "Chart Real Estate" management. You have full control over the visual layout via the inputs tab:
Display Toggles: Every metric (Float %, Dist from High/Low, IPO Timer, VWAPs, etc.) has its own checkbox. Uncheck what you don't need to keep the table compact.
Table Positioning:
Location: Pin the table to any corner (Top/Bottom, Left/Right).
Size: Scale the table from Tiny to Large to fit your resolution.
Push Down: A unique feature that adds empty transparent rows to the top of the table. This pushes the data down so it does not obscure the most recent price candles or the ticker header.
Visual Styling:
Alignment: Independently control the text alignment (Left, Center, Right) for both the Labels and the Data columns.
Colors: Fully customizable Background and Text colors.
Note: The default text color is Black (optimized for Light Mode charts). If you use Dark Mode, simply switch the "Text Color" input to White.
Technical Notes
Data Source: Moving averages and VWAP anchors are calculated using Daily ('D') data to ensure institutional relevance.
ELMEHDI VIP (v4.0)ABO SALTAN //@version=5
indicator(title = 'ELMEHDI VIP (v4.0)', shorttitle = 'EL MEHDI KHEYI(v4.0)', overlay = true, max_boxes_count = 500, max_labels_count = 500, max_lines_count = 500, max_bars_back = 500, max_polylines_count = 100)
bullcolor = #339b44
bearcolor = #af3232
ema150 = ta.ema(close, 150)
ema250 = ta.ema(close, 250)
gr_customalert = "Custom Alerts"
gr_signal = "General Configurations"
gr_PullBacksignal = "Trading Assistants"
gr_RiskManage = "Risk Management"
gr_dash = "Dashboard Configurations"
//symbol info
symInfoCheck = false
symInfo = syminfo.ticker + ' | ' + timeframe.period + (timeframe.isminutes ? 'M' : na)
date = str.tostring(dayofmonth(time_close)) + '/' + str.tostring(month(time_close)) + '/' + str.tostring(year(time_close))
//text positioning
textVPosition = 'middle'
textHPosition = 'center'
//symbol info positioning
symVPosition = 'top'
symHPosition = 'left'
//cell size
width = 0
height1 = 0
//title settings
c_title = #b2b5be80
s_title = 'large'
a_title = 'center'
//subtitle settings
c_subtitle = #b2b5be80
s_subtitle = 'normal'
a_subtitle = 'center'
c_bg = color.new(color.blue, 100)
// Get user input
showSignals = input(true, "Show Signal's", group=gr_signal)
//showSignals = true
sensitivity = input.float(2.4, "Sensitivity", 0.1, step=0.1, group=gr_signal)
STuner = input.int(10, "Signal Tuner(1-25)", minval = 1, maxval = 25, group=gr_signal)
Presets = "All Signals"
//Presets = input.string("All Signals", "Presets", , group=gr_signal)
filterstyle = input.string("Trending Signals ", "Signal Mode / Filters", ["Trending Signals ", "Contrarian Signals ", "High Volume ", "Strong ", "Swing ", "Smooth ", "Scalping ", "Scalping+ "], group=gr_signal)
//TextStyle = input.string("Minimal", "Signal Style", , group=gr_signal)
//periodTrendCloud = input.string("Smooth", "Trend Cloud Style", , group=gr_Other_Settings)
TextStyle = "Minimal"
consSignalsFilter = filterstyle == "Trending Signals " ? true : false
StrongSignalsOnly = filterstyle == "Strong " ? true : false
highVolSignals = filterstyle == "High Volume " ? true : false
signalsTrendCloud = (filterstyle == "Smooth ") ? true : (filterstyle == "Scalping ") ? true : (filterstyle == "Scalping+ ") ? true : (filterstyle == "Swing ") ? true : false
ContrarianOnly = filterstyle == "Contrarian Signals " ? true : false
TrendMap = 'Trend Gradient'
momentumCandles = false
assistantenable = input(true,'', group=gr_PullBacksignal, inline = 'sexyshit')
assistantmode = input.string('Trend Assistant', 'Assistant | Mode', , group = gr_PullBacksignal, inline = 'sexyshit')
Show_PR = input.bool(true, title="", group = gr_PullBacksignal , inline = "Features1")
MSTuner = input.int(8, "Reversal Dot | Tuner(2-30)", minval = 2, maxval = 30, group=gr_PullBacksignal, inline = "Features1")
LongTrendAverage = assistantmode == 'Trend Tracker' and assistantenable == true ? true : false
analyscloud = assistantmode == 'Trend Assistant' and assistantenable == true ? true : false
showTrendCloud = (filterstyle == "Smooth ") ? true : (filterstyle == "Scalping ") ? true : (filterstyle == "Scalping+ ") ? true : (filterstyle == "Swing ") ? true : false
periodTrendCloud = (filterstyle == "Smooth ") ? "Smooth" : (filterstyle == "Scalping ") ? "Scalping" : (filterstyle == "Scalping+ ") ? "Scalping+" : (filterstyle == "Swing ") ? "Swing" : na
//ScalpingPlus = input(false, "Fast trend cloud", group=gr_Other_Settings)
//fastTrendCloudLen = input.int(55, "Fast trend cloud", 2, group=gr_Other_Settings)
fill(plot(showTrendCloud and periodTrendCloud == "Smooth" ? na : assistantenable == true and assistantmode == 'Trend Tracker' ? ema150 : na, "", na, editable=false), plot(showTrendCloud and periodTrendCloud == "Smooth" ? na : assistantenable == true and assistantmode == 'Trend Tracker' ? ema250 : na, "", na, editable=false), ema150 > ema250 ? color.new(bullcolor, 70) : ema150 < ema250 ? color.new(bearcolor, 70) : na)
showDashboard = input(true, "Smart Panel", group = gr_dash , inline = "Features1")
locationDashboard = input.string("Bottom Right", "Dashboard Location", , group = gr_dash , tooltip="Smart Panel")
sizeDashboard = input.string("Small", "Dashboard Size", , group = gr_dash , tooltip="Smart Panel")
tpLabels = input(true, "Dynamic Take Profit Lables", group=gr_RiskManage)
ShowTpSlAreas = input(true, "Show take Profit/Stop-loss Area", group=gr_RiskManage)
ShowTrailingSL = input(false, "Show trailing Stop-loss", group=gr_RiskManage)
usePercSL = input(false, "SL/TRAILING", inline="1", group=gr_RiskManage)
percTrailingSL = input.float(1, "", 0, step=0.1, inline="1", group=gr_RiskManage)
useTP1 = input(true, "", inline="1", group=gr_RiskManage)
multTP1 = input.float(1, "TP 1", 0, inline="1", group=gr_RiskManage)
useTP2 = input(true, "", inline="4", group=gr_RiskManage)
multTP2 = input.float(2, "TP 2", 0, inline="4", group=gr_RiskManage)
useTP3 = input(true, "", inline="4", group=gr_RiskManage)
multTP3 = input.float(3, "TP 3", 0, inline="4", group=gr_RiskManage)
ShowSwings = input(false, "Show Market Structure", inline="3", group=gr_RiskManage)
periodSwings = input.int(10, "", 2, inline="3", group=gr_RiskManage)
//showTS = input(title='Show Trend Shifter', defval=false, group='Contrarian SIGNALS')
// showsignals = input(title='Show Signals', defval=false, group='Contrarian SIGNALS')
// Alerts Managemnt
Normalbuy_alert = input.bool(title='Buy Signal', defval=false, inline = "NB", group=gr_customalert)
Strongbuy_alert = input.bool(title='Strong Buy', defval=true, inline = "NB", group=gr_customalert)
Normalsell_alert = input.bool(title='Sell Signal', defval=false , inline = "NS", group=gr_customalert)
Strongsell_alert = input.bool(title='Strong Sell', defval=true , inline = "NS", group=gr_customalert)
slalert = input.bool(title='Stop-Loss', defval=true , inline = "SLTP1", group=gr_customalert)
tp1alert = input.bool(title='Target 1', defval=true , inline = "SLTP1", group=gr_customalert)
tp2alert = input.bool(title='Target 2', defval=true , inline = "TP2TP3", group=gr_customalert)
tp3alert = input.bool(title='Target 3', defval=true , inline = "TP2TP3", group=gr_customalert)
bullcrosscloud_alert = input.bool(title='Bullish Cloud', defval=false, inline = "CD", group=gr_customalert)
bearcrosscloud_alert = input.bool(title='Bearish Cloud', defval=false, inline = "CD", group=gr_customalert)
showCons = false
paintCons = false
// Signal Text
SimpleBuy = "Buy"
StrongB = "Strong Buy"
SimpleSell = "Sell"
StrongS = "Strong Sell"
if TextStyle == "Normal"
SimpleBuy := "Buy"
StrongB := "BUY"
SimpleSell:= "Sell"
StrongS := "Strong Sell"
if TextStyle == "Minimal"
SimpleBuy := "⬆"
StrongB := "⬆⬆"
SimpleSell:= "⬇"
StrongS := "⬇⬇"
// Signal Text Color
// bullsignalcolor = #ffffff
// bearsignalcolor = color.rgb(255, 255, 255)
// if TextStyle == "Normal"
// bullsignalcolor := color.rgb(255, 255, 255)
// bearsignalcolor := color.rgb(255, 255, 255)
// if TextStyle == "Minimal"
// bullsignalcolor := color.rgb(255, 255, 255)
// bearsignalcolor := color.rgb(255, 255, 255)
src = close
RSII = ta.ema(ta.rsi(src, 50), 30)
TR = math.abs(RSII - RSII )
wwalpha = 1 / 50
WWMA = 0.0
WWMA := wwalpha * TR + (1 - wwalpha) * nz(WWMA )
ATRRSI = 0.0
ATRRSI := wwalpha * WWMA + (1 - wwalpha) * nz(ATRRSI )
TsFast = ta.ema(ta.rsi(src, 50), 30)
TsUP = TsFast + ATRRSI * 4.236
TsDN = TsFast - ATRRSI * 4.236
textWatermark = table.new(textVPosition + '_' + textHPosition, 1, 3)
TsSlow = 0.0
TsSlow := TsUP < nz(TsSlow ) ? TsUP : TsFast > nz(TsSlow ) and TsFast < nz(TsSlow ) ? TsDN : TsDN > nz(TsSlow ) ? TsDN : TsDN < nz(TsSlow ) and TsFast > nz(TsSlow ) ? TsUP : nz(TsSlow )
Colorh = TsFast > 55 ? color.rgb(255, 0, 0) : TsFast < 45 ? color.rgb(0, 255, 8) : #ffffff
//QQF = plot(TsFast, 'TS FAST', color=color.new(color.maroon, 100), linewidth=2, display=display.none, editable = false)
//QQS = plot(TsSlow, 'TS SLOW', color=color.new(color.white, 100), linewidth=2, display=display.none , editable = false)
//plot(TsFast, color=Colorh, linewidth=2, style=plot.style_area, histbase=50)
//BearLimit = hline(60, color=color.gray, linestyle=hline.style_dashed)
//BullLimt = hline(40, color=color.gray, linestyle=hline.style_dashed)
bulllim = 45
bearlim = 55
BullSignalr = ta.crossover(TsFast, TsSlow) and TsFast < bulllim
BearSignallr = ta.crossunder(TsFast, TsSlow) and TsFast > bearlim
/////////////////////////////////////////////////////////
// Trap Detector
////////////////////////////////////////////////////////
// Functions
wavetrend(src, chlLen, avgLen) =>
esa = ta.ema(src, chlLen)
d = ta.ema(math.abs(src - esa), chlLen)
ci = (src - esa) / (0.015 * d)
wt1 = ta.ema(ci, avgLen)
wt2 = ta.sma(wt1, 3)
f_top_fractal(src) => src < src and src < src and src > src and src > src
f_bot_fractal(src) => src > src and src > src and src < src and src < src
f_fractalize (src) => f_top_fractal(src) ? 1 : f_bot_fractal(src) ? -1 : 0
f_findDivs(src, topLimit, botLimit) =>
fractalTop = f_fractalize(src) > 0 and src >= topLimit ? src : na
fractalBot = f_fractalize(src) < 0 and src <= botLimit ? src : na
highPrev = ta.valuewhen(fractalTop, src , 0)
highPrice = ta.valuewhen(fractalTop, high , 0)
lowPrev = ta.valuewhen(fractalBot, src , 0)
lowPrice = ta.valuewhen(fractalBot, low , 0)
bearSignal = fractalTop and high > highPrice and src < highPrev
bullSignal = fractalBot and low < lowPrice and src > lowPrev
// Get components
= wavetrend(close, 5*MSTuner, 10*MSTuner)
= f_findDivs(wt2, 10, -35)
= f_findDivs(wt2, 40, -70)
wtDivBull = wtDivBull1 or wtDivBull2
wtDivBear = wtDivBear1 or wtDivBear2
plotshape(ta.crossover(wt1, wt2) and Show_PR and wt2 <= -60)
plotshape(ta.crossunder(wt1, wt2) and Show_PR and wt2 >= 60)
rsi = ta.rsi(close ,14)
// Functions
f_chartTfInMinutes() =>
float _resInMinutes = timeframe.multiplier * (
timeframe.isseconds ? 1. / 60 :
timeframe.isminutes ? 1. :
timeframe.isdaily ? 60. * 24 :
timeframe.isweekly ? 60. * 24 * 7 :
timeframe.ismonthly ? 60. * 24 * 30.4375 : na)
atr(len) =>
tr = ta.tr
atr = 0.0
atr := nz(atr + (tr - atr ) / len, tr)
supertrend(src, factor, len) =>
atr = ta.atr(len)
upperBand = src + factor * atr
lowerBand = src - factor * atr
prevLowerBand = nz(lowerBand )
prevUpperBand = nz(upperBand )
lowerBand := lowerBand > prevLowerBand or close < prevLowerBand ? lowerBand : prevLowerBand
upperBand := upperBand < prevUpperBand or close > prevUpperBand ? upperBand : prevUpperBand
int direction = na
float superTrend = na
prevSuperTrend = superTrend
if prevSuperTrend == prevUpperBand
direction := close > upperBand ? 1 : -1
else
direction := close < lowerBand ? -1 : 1
superTrend := direction == 1 ? lowerBand : direction == -1 ? upperBand : na
dchannel(len)=>
hh = ta.highest(len)
ll = ta.lowest (len)
trend = 0
trend := close > hh ? 1 : close < ll ? -1 : nz(trend )
trendScalper(show, len1, len2, len3, colorBull, colorBear, colorBarBull, colorBarBear) =>
avgOC = math.avg(open, close)
ha_o = 0.0, ha_o := na(ha_o ) ? avgOC : (ha_o + ohlc4 ) / 2
ema1 = ta.ema(ha_o, len1), ema2 = ta.ema(ha_o, len2), ema3 = ta.ema(ha_o, len3)
ris1 = ema1 > ema1 , ris2 = ema2 > ema2 , ris3 = ema3 > ema3
fal1 = ema1 < ema1 , fal2 = ema2 < ema2 , fal3 = ema3 < ema3
colorEma1 = ris1 ? colorBull : fal1 ? colorBear : na, colorEma2 = ris2 ? colorBull : fal2 ? colorBear : na, colorEma3 = ris3 ? colorBull : fal3 ? colorBear : na
fillEma1 = avgOC > ema1 ? colorBull : avgOC < ema1 ? colorBear : na, fillEma2 = ema1 > ema2 ? colorBull : ema1 < ema2 ? colorBear : na, fillEma3 = ema2 > ema3 ? colorBull : ema2 < ema3 ? colorBear : na
colorBar = close < ema1 and close < ema2 ? colorBarBear : colorBarBull
candlesMom() =>
= ta.macd(close, 2, 4, 3)
(macd > 10 and macd > macd ) or (macd < 10 and macd < macd )
trailingSL(buy, sell, factor, len, usePerc, perc) =>
atr = atr(len)
upperBand = high + (usePerc ? high * (perc / 100) : factor * atr)
lowerBand = low - (usePerc ? low * (perc / 100) : factor * atr)
prevLowerBand = nz(lowerBand )
prevUpperBand = nz(upperBand )
lowerBand := lowerBand > prevLowerBand or buy ? lowerBand : prevLowerBand
upperBand := upperBand < prevUpperBand or sell ? upperBand : prevUpperBand
int direction = na
float stop = na
prevSuperTrend = stop
if prevSuperTrend == prevUpperBand
direction := buy ? 1 : -1
else
direction := sell ? -1 : 1
stop := direction == 1 ? lowerBand : direction == -1 ? upperBand : na
add_to_zz(zz, val, bi) =>
array.unshift(zz, bi)
array.unshift(zz, val)
if array.size(zz) > 12
array.pop(zz)
update_zz(zz, val, bi, dir) =>
if array.size(zz) == 0
add_to_zz(zz, val, bi)
else
if dir == 1 and val > array.get(zz, 0) or dir == -1 and val < array.get(zz, 0)
array.set(zz, 0, val)
array.set(zz, 1, bi)
0
// Get components
vosc = ta.obv - ta.ema(ta.obv, 20)
bs = ta.ema(nz(math.abs((open - close) / (high - low) * 100)), 3)
ema = ta.ema(close, 200)
emaBull = close > ema
equal_tf(res) => str.tonumber(res) == f_chartTfInMinutes()
higher_tf(res) => str.tonumber(res) > f_chartTfInMinutes()
too_small_tf(res) => (timeframe.isweekly and res=="1") or (timeframe.ismonthly and str.tonumber(res) < 10)
securityNoRep(sym, res, src) =>
bool bull = na
bull := equal_tf(res) ? src : bull
bull := higher_tf(res) ? request.security(sym, res, src, barmerge.gaps_off, barmerge.lookahead_off) : bull
bull_array = request.security_lower_tf(syminfo.tickerid, higher_tf(res) ? str.tostring(f_chartTfInMinutes()) : too_small_tf(res) ? (timeframe.isweekly ? "3" : "10") : res, src)
if array.size(bull_array) > 1 and not equal_tf(res) and not higher_tf(res)
bull := array.pop(bull_array)
array.clear(bull_array)
bull
//TF1Bull = securityNoRep(syminfo.tickerid, "1" , emaBull)
//TF3Bull = securityNoRep(syminfo.tickerid, "3" , emaBull)
TF5Bull = securityNoRep(syminfo.tickerid, "5" , emaBull)
//TF10Bull = securityNoRep(syminfo.tickerid, "10" , emaBull)
TF15Bull = securityNoRep(syminfo.tickerid, "15" , emaBull)
TF30Bull = securityNoRep(syminfo.tickerid, "30" , emaBull)
TF60Bull = securityNoRep(syminfo.tickerid, "60" , emaBull)
//TF120Bull = securityNoRep(syminfo.tickerid, "120" , emaBull)
TF240Bull = securityNoRep(syminfo.tickerid, "240" , emaBull)
//TF720Bull = securityNoRep(syminfo.tickerid, "720" , emaBull)
//TFDBull = securityNoRep(syminfo.tickerid, "1440", emaBull)
hma55 = ta.hma(close, 55 )
= ta.macd(close, 12, 26, 9)
supertrend = supertrend(close, sensitivity, STuner)
maintrend = dchannel(30)
confBull = (ta.crossover (close, supertrend) or (ta.crossover (close, supertrend) and maintrend < 0)) and macd > 0 and macd > macd and ema150 > ema250 and hma55 > hma55 and maintrend > 0
confBear = (ta.crossunder(close, supertrend) or (ta.crossunder(close, supertrend) and maintrend > 0)) and macd < 0 and macd < macd and ema150 < ema250 and hma55 < hma55 and maintrend < 0
trendcloud = supertrend(ohlc4, periodTrendCloud == "Swing" ? 7 : 4, 10)
hma = periodTrendCloud == "Scalping+" ? ta.hma(close, 55) : na
none = close > 0
= ta.dmi(14, 14)
consFilter = adx > 20
ContBear = TsFast > 65
ContBull = TsFast < 35
StrongFilter = ta.ema(close, 200)
//volFilter = (ta.ema(volume, 25) - ta.ema(volume, 26)) / ta.ema(volume, 26) > 0
volFilter = (ta.ema(volume, 15) - ta.ema(volume, 20)) / ta.ema(volume, 25) > 0
trendFilter = trendcloud
bull = (Presets == "All Signals" ? ta.crossover (close, supertrend) : confBull and not confBull ) and Presets != "Trend Scalper" and (StrongSignalsOnly ? close > StrongFilter : none) and (ContrarianOnly ? ContBull : none) and (consSignalsFilter ? consFilter : none) and (highVolSignals ? volFilter : none) and (signalsTrendCloud ? (periodTrendCloud == "Smooth" ? ema150 > ema250 : close > trendFilter) : none)
bear = (Presets == "All Signals" ? ta.crossunder(close, supertrend) : confBear and not confBear ) and Presets != "Trend Scalper" and (StrongSignalsOnly ? close < StrongFilter : none) and (ContrarianOnly ? ContBear : none) and (consSignalsFilter ? consFilter : none) and (highVolSignals ? volFilter : none) and (signalsTrendCloud ? (periodTrendCloud == "Smooth" ? ema150 < ema250 : close < trendFilter) : none)
countBull = ta.barssince(bull)
countBear = ta.barssince(bear)
trigger = nz(countBull, bar_index) < nz(countBear, bar_index) ? 1 : 0
= trendScalper(Presets == "Trend Scalper" ? true : false, 5, 9, 21, bullcolor, bearcolor, bullcolor, bearcolor)
trailingStop = trailingSL(bull, bear, 2.2, 14, usePercSL, percTrailingSL)
float _ph = ta.highestbars(high, periodSwings) == 0 ? high : na
float _pl = ta.lowestbars (low, periodSwings) == 0 ? low : na
var _dir = 0, dir_ = _pl and na(_ph) ? -1 : _dir, _dir := _ph and na(_pl) ? 1 : dir_, dirChg = ta.change(_dir)
var zz = array.new_float(0), zzOld = array.copy(zz)
float zzLive = _ph or _pl ? (dirChg ? add_to_zz(zz, _dir == 1 ? _ph : _pl, bar_index) : update_zz(zz, _dir == 1 ? _ph : _pl, bar_index, _dir)) : na
float hb_ = ta.highestbars(10) == 0 ? high : na
float lb_ = ta.lowestbars (10) == 0 ? low : na
var int dir = 0
float zz_ = na
float pp = na
var int consCnt = 0
var float condHi = na
var float condLo = na
float H_ = ta.highest(5)
float L_ = ta.lowest (5)
var line lineUp = na
var line lineDn = na
bool breakUp = false
bool breakDn = false
var float pvh1_price = array.new_float(1000, na)
var int pvh1_time = array.new_int (1000, na)
var float pvl1_price = array.new_float(1000, na)
var int pvl1_time = array.new_int (1000, na)
var float pvh2_price = array.new_float(1000, na)
var int pvh2_time = array.new_int (1000, na)
var float pvl2_price = array.new_float(1000, na)
var int pvl2_time = array.new_int (1000, na)
var float htcmrll_price = na
var int htcmrll_time = na
var float ltcmrhh_price = na
var int ltcmrhh_time = na
var box long_boxes = array.new_box()
var box short_boxes = array.new_box()
var float temp_pv_0 = na
var float temp_pv_1 = na
var float temp_pv_2 = na
bool pvh = high < high and high > high
bool pvl = low > low and low < low
int pv1_time = bar_index
float pv1_high = high
float pv1_low = low
var buyBars = array.new_box(365, na)
for i = 0 to 364
box.delete(array.get(buyBars, i))
var sellBars = array.new_box(365, na)
for i = 0 to 364
box.delete(array.get(sellBars, i))
// Colors
green = bullcolor, green50 = color.new(green, 50), green20 = color.new(green, 80)
red = bearcolor, red50 = color.new(red, 50), red20 = color.new(red, 80)
silver = #B2B5BE, silver50 = color.new(silver, 50), silver20 = color.new(silver, 80)
// Plots
atrBand = usePercSL ? (trigger ? low : high) * (percTrailingSL / 100) : ta.atr(14) * 2.2
atrStop = trigger ? low - atrBand : high + atrBand
lastTrade(src) => ta.valuewhen(bull or bear, src, 0)
entry_y = lastTrade(close)
stop_y = lastTrade(atrStop)
tp1_y = (entry_y-lastTrade(atrStop))*multTP1 + entry_y
tp2_y = (entry_y-lastTrade(atrStop))*multTP2 + entry_y
tp3_y = (entry_y-lastTrade(atrStop))*multTP3 + entry_y
labelTpSl(cond, y, txt, color) =>
label labelTpSl = ShowTpSlAreas and cond ? label.new(bar_index + 1, y, txt, xloc.bar_index, yloc.price, color, label.style_label_left, color.white, size.normal) : na
label.delete(labelTpSl )
labelTpSl(none, entry_y, "Entry : " + str.tostring(math.round_to_mintick(entry_y)), #089981)
labelTpSl(none, stop_y , "Stop loss : " + str.tostring(math.round_to_mintick(atrStop)), bearcolor)
labelTpSl(useTP1 and multTP1 != 0, tp1_y, "TP 1 : " + str.tostring(math.round_to_mintick(tp1_y)), #089981)
labelTpSl(useTP2 and multTP2 != 0, tp2_y, "TP 2 : " + str.tostring(math.round_to_mintick(tp2_y)), #089981)
labelTpSl(useTP3 and multTP3 != 0, tp3_y, "TP 3 : " + str.tostring(math.round_to_mintick(tp3_y)), #089981)
lineTpSl(cond, y, color, style) =>
line lineTpSl = ShowTpSlAreas and cond ? line.new(bar_index - (trigger ? countBull : countBear), y, bar_index + 1, y, xloc.bar_index, extend.none, color, style) : na
line.delete(lineTpSl )
lineTpSl(none, entry_y, #089981, line.style_dashed)
lineTpSl(none, stop_y , bearcolor , line.style_solid )
lineTpSl(useTP1 and multTP1 != 0, tp1_y, bullcolor, line.style_dotted)
lineTpSl(useTP2 and multTP2 != 0, tp2_y, bullcolor, line.style_dotted)
lineTpSl(useTP3 and multTP3 != 0, tp3_y, bullcolor, line.style_dotted)
//buy = showSignals and bull ? label.new(bar_index, low , close > StrongFilter ? StrongB : SimpleBuy , xloc.bar_index, yloc.belowbar, bullcolor, label.style_label_up , color.rgb(255, 255, 255), size.normal) : na
//sell = showSignals and bear ? label.new(bar_index, high, close < StrongFilter ? StrongS : SimpleSell , xloc.bar_index, yloc.abovebar, bearcolor , label.style_label_down, color.rgb(255, 255, 255), size.normal) : na
buy = (showSignals and bull ? label.new(bar_index, low , close > StrongFilter ? StrongB : SimpleBuy , xloc.bar_index, yloc.belowbar, bullcolor, label.style_label_up , color.rgb(255, 255, 255), size.normal) : na)
sell = showSignals and bear ? label.new(bar_index, high, close < StrongFilter ? StrongS : SimpleSell , xloc.bar_index, yloc.abovebar, bearcolor , label.style_label_down, color.rgb(255, 255, 255), size.normal) : na
tpLabels(tp) =>
tp1Bull = ta.crossover (rsi, 70), tp2Bull = ta.crossover (rsi, 75), tp3Bull = ta.crossover (rsi, 80)
tp1Bull := tp1Bull and (nz(ta.barssince(tp1Bull) , 9999) > countBull), tp2Bull := tp2Bull and (ta.barssince(tp1Bull) <= countBull), tp2Bull := tp2Bull and (nz(ta.barssince(tp2Bull) , 9999) > countBull), tp3Bull := tp3Bull and (ta.barssince(tp2Bull) <= countBull), tp3Bull := tp3Bull and (nz(ta.barssince(tp3Bull) , 9999) > countBull)
tp1Bear = ta.crossunder(rsi, 30), tp2Bear = ta.crossunder(rsi, 25), tp3Bear = ta.crossunder(rsi, 20)
tp1Bear := tp1Bear and (nz(ta.barssince(tp1Bear) , 9999) > countBear), tp2Bear := tp2Bear and (ta.barssince(tp1Bear) <= countBear), tp2Bear := tp2Bear and (nz(ta.barssince(tp2Bear) , 9999) > countBear), tp3Bear := tp3Bear and (ta.barssince(tp2Bear) <= countBear), tp3Bear := tp3Bear and (nz(ta.barssince(tp3Bear) , 9999) > countBear)
if Presets != "Trend Scalper" and tpLabels
trigger ? (tp == 1 ? tp1Bull : tp == 2 ? tp2Bull : tp3Bull) : (tp == 1 ? tp1Bear : tp == 2 ? tp2Bear : tp3Bear)
plotshape(tpLabels(1), "", shape.xcross, location.abovebar, trigger ? green : na , 0, "TP 1", trigger ? green : na , true)
plotshape(tpLabels(2), "", shape.xcross, location.abovebar, trigger ? green : na , 0, "TP 2", trigger ? green : na , false)
plotshape(tpLabels(3), "", shape.xcross, location.abovebar, trigger ? green : na , 0, "TP 3", trigger ? green : na , false)
plotshape(tpLabels(1), "", shape.xcross, location.belowbar, trigger ? na : red, 0, "TP 1", trigger ? na : red, true)
plotshape(tpLabels(2), "", shape.xcross, location.belowbar, trigger ? na : red, 0, "TP 2", trigger ? na : red, false)
plotshape(tpLabels(3), "", shape.xcross, location.belowbar, trigger ? na : red, 0, "TP 3", trigger ? na : red, false)
var label zzLabel = na
if array.size(zz) > 12 and ShowSwings
if array.get(zz, 0) != array.get(zzOld, 0) or array.get(zz, 1) != array.get(zzOld, 1)
if array.get(zz, 2) == array.get(zzOld, 2) and array.get(zz, 3) == array.get(zzOld, 3)
label.delete(zzLabel)
zzLabel := label.new(math.round(array.get(zz, 1)), array.get(zz, 0), _dir == 1 ? array.get(zz, 0) > array.get(zz, 4) ? ((array.get(zz, 4) < array.get(zz, 8)) ? "High" : "HH") : "LH" : array.get(zz, 0) < array.get(zz, 4) ? ((array.get(zz, 4) > array.get(zz, 8)) ? "Low" : "LL") : "HL", xloc.bar_index, yloc.price, color.new(color.white, 100), _dir == 1 ? label.style_label_down : label.style_label_up, _dir == 1 ? bullcolor : bearcolor)
if showCons and barstate.isconfirmed
dir := hb_ and na(lb_) ? 1 : lb_ and na(hb_) ? -1 : dir
if hb_ and lb_
if dir == 1
zz_ := hb_
else
zz_ := lb_
else
zz_ := hb_ ? hb_ : lb_ ? lb_ : na
for x = 0 to 1000
if na(close) or dir != dir
break
if zz_
if na(pp)
pp := zz_
else
if dir == 1 and zz_ > pp
pp := zz_
if dir == -1 and zz_ < pp
pp := zz_
if pp != pp
if consCnt > 5
if pp > condHi
breakUp := true
if pp < condLo
breakDn := true
if consCnt > 0 and pp <= condHi and pp >= condLo
consCnt += 1
else
consCnt := 0
else
consCnt += 1
if consCnt >= 5
if consCnt == 5
condHi := H_
condLo := L_
else
line.delete(lineUp)
line.delete(lineDn)
condHi := math.max(condHi, high)
condLo := math.min(condLo, low )
lineUp := line.new(bar_index, condHi , bar_index - consCnt, condHi , color=bearcolor , style=line.style_dashed)
lineDn := line.new(bar_index, condLo , bar_index - consCnt, condLo , color=color.lime, style=line.style_dashed)
fill(plot(condHi, "", na, 1, plot.style_stepline, editable=false), plot(condLo, "", na, 1, plot.style_stepline, editable=false), paintCons and consCnt > 5 ? color.white : na, "", false)
//buy_col = color.new(#0ac20a,0)
//sell_col = color.new(#fd1605,0)
//text_col = color.new(#FFFFFF,0)
// -------- Bearish trend (blue) color selection --------
// getSellColor(count) =>
// if count == 1
// color.new(#11e7f2,0)
// else
// if count == 2
// color.new(#11d9f2,0)
// else
// if count == 3
// color.new(#11cbf2,0)
// else
// if count == 4
// color.new(#11aff2,0)
// else
// if count == 5
// color.new(#1193f2,0)
// else
// if count == 6
// color.new(#1176f2,0)
// else
// if count == 7
// color.new(#105df4,0)
// else
// if count == 8
// color.new(#1051f5,0)
// else
// if count == 9
// color.new(#0f44f5,0)
// else
// if count == 10
// color.new(#0c3de0,0)
// else
// if count == 11
// color.new(#0935ca,0)
// else
// if count == 12
// color.new(#062eb4,0)
// else
// if count == 13
// color.new(#02269e,0)
// -------- Bullish trend (blue) color selection --------
// getBuyColor(count) =>
// if count == 1
// color.new(#eef211,0)
// else
// if count == 2
// color.new(#efdc11,0)
// else
// if count == 3
// color.new(#f0c511,0)
// else
// if count == 4
// color.new(#f1af11,0)
// else
// if count == 5
// color.new(#f29811,0)
// else
// if count == 6
// color.new(#f28811,0)
// else
// if count == 7
// color.new(#f27811,0)
// else
// if count == 8
// color.new(#f26811,0)
// else
// if count == 9
// color.new(#f25811,0)
// else
// if count == 10
// color.new(#ea420d,0)
// else
// if count == 11
// color.new(#e12c09,0)
// else
// if count == 12
// color.new(#d81605,0)
// else
// if count == 13
// color.new(#cf0000,0)
// -------- Calculate bearish trend sequence --------
buySetup = 0
buySetup := close < close ? buySetup == 13 ? 1 : buySetup + 1 : 0
// -------- Calculate bullish trend sequence --------
sellSetup = 0
sellSetup := close > close ? sellSetup == 13 ? 1 : sellSetup + 1 : 0
// -------- Paint bars --------
//barColour = buySetup >= 1 ? getBuyColor(buySetup) : sellSetup >= 1 ? getSellColor(sellSetup) : na
// Candle Coloring
// Input
FastteyLength = 12
SjlowLeyLength = 26
srrrc = close
signalXLength = 9
// Data reference
= ta.macd(srrrc, FastteyLength, SjlowLeyLength, signalXLength)
// 4 level of green
greenHigh = #7bff00
greenMidHigh = #7bff00
greenMidLow = #7bff00
greenLow = #7bff00
// Yellow
yellowLow = #693d8e
// 4 level of red
redHigh = #ff0000
redMidHigh = #ff0000
redMidLow = #ff0000
redLow = #ff0000
// Default color
candleBody = yellowLow
// Ranging trend
if histX > 0
if histX > histX and histX > 0
candleBody := greenLow
if histX < 0
if histX < histX and histX < 0
candleBody := redLow
// Bullish trend
if MacdX > 0 and histX > 0
candleBody := greenMidLow
if histX > histX and MacdX > 0 and histX > 0
candleBody := greenMidHigh
if histX > histX and MacdX > 0 and histX > 0
candleBody := greenHigh
// Bearish trend
if MacdX < 0 and histX < 0
candleBody := redMidLow
if histX < histX and MacdX < 0 and histX < 0
candleBody := redMidHigh
if histX < histX and MacdX < 0 and histX < 0
candleBody := redHigh
barcolor(candleBody)
//barcolor(TrendMap == 'RSI Gradient' ? barColour : na, title='Bar colors (heatmap)',editable=false)
//barcolor(momentumCandles and candlesMom() ? color.rgb(187, 187, 187) : TrendMap == 'Signal Based' ? (Presets == "Trend Scalper" ? colorBar : na(countBull) and na(countBear) ? color.gray : trigger ? bullcolor : bearcolor) : TrendMap == 'RSI Gradient' ? barColour : TrendMap == 'Trend Gradient' ? candleBody : na , editable=false)
//plotcandle(open, high, low, close , color = momentumCandles and candlesMom() ? color.rgb(187, 187, 187) : TrendMap == 'Signal Based' ? (Presets == "Trend Scalper" ? colorBar : na(countBull) and na(countBear) ? color.gray : trigger ? bullcolor : bearcolor) : TrendMap == 'RSI Gradient' ? barColour : TrendMap == 'Trend Gradient' ? candleBody : na , editable=false , wickcolor = momentumCandles and candlesMom() ? color.rgb(187, 187, 187) : TrendMap == 'Signal Based' ? (Presets == "Trend Scalper" ? colorBar : na(countBull) and na(countBear) ? color.gray : trigger ? bullcolor : bearcolor) : TrendMap == 'RSI Gradient' ? barColour : TrendMap == 'Trend Gradient' ? candleBody : na , editable=false , bordercolor = momentumCandles and candlesMom() ? color.rgb(187, 187, 187) : TrendMap == 'Signal Based' ? (Presets == "Trend Scalper" ? colorBar : na(countBull) and na(countBear) ? color.gray : trigger ? bullcolor : bearcolor) : TrendMap == 'RSI Gradient' ? barColour : TrendMap == 'Trend Gradient' ? candleBody : na , editable=false , editable = false)
fill(plot(showTrendCloud and periodTrendCloud == "Smooth" ? ema150 : na, "", na, editable=false), plot(showTrendCloud and periodTrendCloud == "Smooth" ? ema250 : na, "", na, editable=false), ema150 > ema250 ? color.new(bullcolor, 70) : ema150 < ema250 ? color.new(bearcolor, 70) : na)
plot(ShowTrailingSL and trigger and nz(ta.barssince(low < trailingStop), bar_index) > countBull ? trailingStop : na, "", green, 1, plot.style_linebr, editable=false)
plot(ShowTrailingSL and not trigger and nz(ta.barssince(high > trailingStop), bar_index) > countBear ? trailingStop : na, "", red , 1, plot.style_linebr, editable=false)
p0 = plot(avgOC, "", na , editable=false)
p1 = plot(ema5 , "", colorEma5 , editable=false)
p2 = plot(ema9 , "", colorEma9 , editable=false)
p3 = plot(ema21, "", colorEma21, editable=false)
plot(LongTrendAverage ? ta.ema(close, 250) : na, 'Trend Tracer', linewidth=2, color=close > ta.ema(close, 250) ? color.new(bullcolor, 45) : color.new(bearcolor, 45))
fill(p0, p1, fillEma5 )
fill(p1, p2, fillEma9 )
fill(p2, p3, fillEma21)
fill(plot(showTrendCloud and periodTrendCloud != "Smooth" and periodTrendCloud != "Scalping+" and trendcloud != 0 and close > trendcloud ? trendcloud : na, "", bullcolor, 1, plot.style_linebr, editable=false), p0, color.new(bullcolor, 90))
fill(plot(showTrendCloud and periodTrendCloud != "Smooth" and periodTrendCloud != "Scalping+" and trendcloud != 0 and close < trendcloud ? trendcloud : na, "", bearcolor , 1, plot.style_linebr, editable=false), p0, color.new(bearcolor , 90))
//fill(plot(hma, "", hma > hma ? green : hma < hma ? red : na, editable=false), plot(hma , "", hma > hma ? green : hma < hma ? red : na, editable=false), hma > hma ? green : hma < hma ? red : na)
////////////////////////////////////////////////////////////////////////////////////////////////
// Get user input
indicatorTF = "Chart"
// Functions
sqz(bbLen, bbMult, kcLen, kcMult, source) =>
upperBB = ta.sma(source, bbLen) + ta.stdev(source, bbLen) * bbMult
lowerBB = ta.sma(source, bbLen) - ta.stdev(source, bbLen) * bbMult
upperKC = ta.sma(source, kcLen) + ta.sma(ta.tr, kcLen) * kcMult
lowerKC = ta.sma(source, kcLen) - ta.sma(ta.tr, kcLen) * kcMult
sqzOn = lowerBB > lowerKC and upperBB < upperKC
sqzOff = lowerBB < lowerKC and upperBB > upperKC
qqe(rsiLen, rsiSmooth, factor, source, bbLen, bbMult) =>
rsiMa = ta.ema(ta.rsi(source, rsiLen), rsiSmooth)
delta = ta.ema(ta.ema(math.abs(ta.mom(rsiMa, 1)), rsiLen * 2 - 1), rsiLen * 2 - 1) * factor
longBand = 0.0, longBand := rsiMa > longBand and rsiMa > longBand ? math.max(longBand , rsiMa - delta) : rsiMa - delta
shortBand = 0.0, shortBand := rsiMa < shortBand and rsiMa < shortBand ? math.min(shortBand , rsiMa + delta) : rsiMa + delta
cross1 = ta.cross(rsiMa, shortBand )
cross2 = ta.cross(rsiMa, longBand )
trend = 0.0, trend := cross1 ? 1 : cross2 ? -1 : nz(trend , 1)
fastDelta = trend == 1 ? longBand : shortBand
_hist = rsiMa - 50
_line = fastDelta - 50
= ta.bb(_line, bbLen, bbMult)
// Get components
cond(_offset) =>
top = ta.highest(high, 10)
bot = ta.lowest(low, 10)
osc = ta.ema(hlc3, 5) - ta.ema(ohlc4, 20)
oscRis = osc > osc
oscFal = osc < osc
oscA0 = osc > 0
oscB0 = osc < 0
oscTop = oscFal and oscRis
oscBot = oscRis and oscFal
bullR = oscB0 and oscBot and ((osc > ta.valuewhen(oscB0 and oscBot, osc, 1) and bot < ta.valuewhen(oscB0 and oscBot, bot, 1)))
bearR = oscA0 and oscTop and ((osc < ta.valuewhen(oscA0 and oscTop, osc, 1) and top > ta.valuewhen(oscA0 and oscTop, top, 1)))
bullH = oscB0 and oscBot and ((osc < ta.valuewhen(oscB0 and oscBot, osc, 1) and bot > ta.valuewhen(oscB0 and oscBot, bot, 1)))
bearH = oscA0 and oscTop and ((osc > ta.valuewhen(oscA0 and oscTop, osc, 1) and top < ta.valuewhen(oscA0 and oscTop, top, 1)))
= sqz(20, 2, 20, 2, close)
= qqe(6, 6, 3, close, 50, 0.001)
= qqe(6, 5, 1.618, close, 50, 1)
= ta.dmi(14, 14)
[osc , oscRis , oscFal , oscA0 , oscB0 , oscTop , oscBot , bullR , bearR , bullH , bearH , sqzOn , sqzOff , _hist1 , upper1 , lower1 , _hist2 , _line2 , tvr ]
tf = indicatorTF == "Chart" ? timeframe.period : indicatorTF == "1 minute" ? "1" : indicatorTF == "3 minutes" ? "3" : indicatorTF == "5 minutes" ? "5" : indicatorTF == "10 minutes" ? "10" : indicatorTF == "15 minutes" ? "15" : indicatorTF == "30 minutes" ? "30" : indicatorTF == "45 minutes" ? "45" : indicatorTF == "1 hour" ? "60" : indicatorTF == "2 hours" ? "120" : indicatorTF == "3 hours" ? "180" : indicatorTF == "4 hours" ? "240" : indicatorTF == "12 hours" ? "720" : indicatorTF == "1 day" ? "1D" : indicatorTF == "1 week" ? "1W" : indicatorTF == "1 month" ? "1M" : na
= request.security(syminfo.tickerid, tf, cond(indicatorTF != "Chart" and barstate.isrealtime ? 1 : 0))
//colorTVR = tvr < 15 ? #F6525F : tvr > 15 and tvr < 25 ? #B2B5BE : #66BB6A
// Plots
//plot(Presets == "Money Moves TrendVR" ? tvr : na, "", colorTVR, editable=false)
TrendText = "Trending"
if tvr < 15 and tvr < 25
TrendText := "No trend"
if tvr > 15 and tvr < 25
TrendText := "Ranging"
//------------------------------------------------------------------------------------------------------- Volatitiry
//Calculates Volatility for Dashboard
atrr = 3 * ta.atr(10)
stdAtr = 2 * ta.stdev(atrr, 20)
smaAtr = ta.sma(atrr, 20)
topAtrDev = smaAtr + stdAtr
bottomAtrDev = smaAtr - stdAtr
calcDev = (atrr - bottomAtrDev) / (topAtrDev - bottomAtrDev)
percentVol = 40 * calcDev + 30
AvrLength = 21
PercentFilter = 144
xAavrVolume = ta.rma(volume, AvrLength)
nResLess = volume * 100 / xAavrVolume < PercentFilter ? 0 : volume
nRes = nResLess
clr = close < open ? #b2b5be : #00dbff
//plot(nRes, color=clr, style=plot.style_columns, title='Volume Filter', transp=20)
VolitiText = "Inactive"
if nRes
VolitiText := "Active"
//////////////////////////////////////////
ema69 = ta.ema(close, 9)
totalSentTxt = ema69 > ema69 ? 'Bullish' : ema69 < ema69 ? 'Bearish' : 'Flat'
// INputs
//Timezones
tz_incr = 0
use_exchange = false
//------------------------------------------------------------------------------
//Settings
//-----------------------------------------------------------------------------{
//Session A
NYSes = true
NYTxt = 'New York'
NYTime = '1300-2200'
//Session B
LDSes = true
sesb_txt = 'London'
sesb_ses = '0700-1600'
//Session C
show_sesc = true
sesc_txt = 'Tokyo'
sesc_ses = '0000-0900'
//Session D
show_sesd = true
sesd_txt = 'Sydney'
sesd_ses = '2100-0600'
//-----------------------------------------------------------------------------}
//Sessions
//-----------------------------------------------------------------------------{
tff = timeframe.period
var tz = use_exchange ? syminfo.timezone :
str.format('UTC{0}{1}', tz_incr >= 0 ? '+' : '-', math.abs(tz_incr))
is_sesa = math.sign(nz(time(tff, NYTime, tz)))
is_sesb = math.sign(nz(time(tff, sesb_ses, tz)))
is_sesc = math.sign(nz(time(tff, sesc_ses, tz)))
is_sesd = math.sign(nz(time(tff, sesd_ses, tz)))
////////////////////////////////////////////
SessionText = "Default"
if is_sesd
SessionText := sesd_txt
if is_sesc
SessionText := sesc_txt
if is_sesb
SessionText := sesb_txt
if is_sesa
SessionText := NYTxt
if is_sesd and is_sesc
SessionText := "Sydney/Tokyo"
if is_sesb and is_sesc
SessionText := "Tokyo/London"
if is_sesb and is_sesa
SessionText := "London/Newyork"
if is_sesa and is_sesd
SessionText := "Newyork/Sydney"
//-----------------------------------------------------------------------------}
//Overlays color.green : color.red
//
var dashboard_loc = locationDashboard == "Top Right" ? position.top_right : locationDashboard == "Middle Right" ? position.middle_right : locationDashboard == "Bottom Right" ? position.bottom_right : locationDashboard == "Top Center" ? position.top_center : locationDashboard == "Middle Center" ? position.middle_center : locationDashboard == "Bottom Center" ? position.bottom_center : locationDashboard == "Top Left" ? position.top_left : locationDashboard == "Middle Left" ? position.middle_left : position.bottom_left
var dashboard_size = sizeDashboard == "Large" ? size.large : sizeDashboard == "Normal" ? size.normal : sizeDashboard == "Small" ? size.small : size.tiny
var dashboard = showDashboard ? table.new(dashboard_loc, 3, 7, color.rgb(0, 0, 0, 60), #3d384300, 2, color.rgb(30, 34, 45 , 60), 1) : na
dashboard_cell(column, row, txt, signal=false) => table.cell(dashboard, column, row, txt, 0, 0, signal ? #000000 : color.white, text_size=dashboard_size)
dashboard_cell_bg(column, row, col) => table.cell_set_bgcolor(dashboard, column, row, col)
if barstate.islast and showDashboard
// MTF Trend
dashboard_cell(0, 0 , "MTF")
dashboard_cell(0, 2 , "M5") , dashboard_cell_bg(0, 2 , TF5Bull ? color.rgb(70, 153, 67) : #880000)
dashboard_cell(0, 3 , "M15") , dashboard_cell_bg(0, 3 , TF15Bull ? color.rgb(70, 153, 67) : #880000)
dashboard_cell(0, 4 , "M30") , dashboard_cell_bg(0, 4 , TF30Bull ? color.rgb(70, 153, 67) : #880000)
dashboard_cell(0, 5 , "1H") , dashboard_cell_bg(0, 5 , TF60Bull ? color.rgb(70, 153, 67) : #880000)
dashboard_cell(0, 6 , "4H") , dashboard_cell_bg(0, 6 , TF240Bull ? color.rgb(70, 153, 67) : #880000)
// Middel part
dashboard_cell(1, 0 , "PoseidonPips")
dashboard_cell(1, 2 , "Market State")
dashboard_cell(1, 3 , "Volatility")
dashboard_cell(1, 4 , "Institutional Activity")
dashboard_cell(1, 5 , "Current Session (UTC)")
dashboard_cell(1, 6 , "Trend Pressure")
// End part
dashboard_cell(2, 0 , "")
dashboard_cell(2, 2 , TrendText)
dashboard_cell(2, 3 , str.tostring(percentVol, '##.##') + '%')
dashboard_cell(2, 4 , VolitiText)
dashboard_cell(2, 5 , SessionText)
dashboard_cell(2, 6 , totalSentTxt)
// Alerts
// Cross Functions for SL and TP
f_sl_crossed() =>
ret = false
crossBull = low >= ta.lowest(low, 5) and low < ta.lowest(low, 5)
crossBear = high <= ta.highest(high, 5) and high > ta.highest(high, 5)
ret := trigger ? crossBull : crossBear
ret
f_tp_crossed(tp) =>
ret = false
crossBull = high <= tp and high > tp
crossBear = low >= tp and low < tp
ret := trigger ? crossBull : crossBear
ret
// Alert Conditions
alert04 = bull and close <= StrongFilter
alert07 = bull and close > StrongFilter
alert09 = f_sl_crossed()
alert11 = f_tp_crossed(60.0)
alert12 = f_tp_crossed(80.0)
alert13 = f_tp_crossed(100.0)
alert14 = periodTrendCloud == "Smooth" ? ta.crossunder(ema150, ema250) : (close < trendcloud) and (close > trendcloud )
alert15 = periodTrendCloud == "Smooth" ? ta.crossover(ema150, ema250) : (close > trendcloud) and (close < trendcloud )
// Signal Alerts
if alert04 and Normalbuy_alert
alert('Buy Signal Alert !!!', alert.freq_once_per_bar_close)
alert(syminfo.tickerid)
if alert07 and Strongbuy_alert
alert('Strong Buy Signal Alert !!!', alert.freq_once_per_bar_close)
alert(syminfo.tickerid)
if (bear and close >= StrongFilter) and Normalsell_alert
alert('Sell Signal Alert !!!', alert.freq_once_per_bar_close)
alert(syminfo.tickerid)
if (bear and close < StrongFilter) and Strongsell_alert
alert('Strong Sell Signal Alert !!!', alert.freq_once_per_bar_close)
alert(syminfo.tickerid)
// Risk Management Alerts
if alert09 and slalert
alert('SL Alert !!!', alert.freq_once_per_bar_close)
alert(syminfo.tickerid)
if alert11 and tp1alert
alert('Target 1 Alert !!!', alert.freq_once_per_bar_close)
alert(syminfo.tickerid)
if alert12 and tp2alert
alert('Target 2 Alert !!!', alert.freq_once_per_bar_close)
alert(syminfo.tickerid)
if alert13 and tp3alert
alert('Target 3 Alert !!!', alert.freq_once_per_bar_close)
alert(syminfo.tickerid)
// Cloud Alerts
if alert15 and bullcrosscloud_alert
alert('Cloud Turned Bullish !!!', alert.freq_once_per_bar_close)
alert(syminfo.tickerid)
if alert14 and bearcrosscloud_alert
alert('Cloud Turned Bearish !!!', alert.freq_once_per_bar_close)
alert(syminfo.tickerid)
// Alert Conditions for TradingView
alertcondition(alert04, "Normal Buy Alert", "Normal Buy Signal")
alertcondition(alert07, "Strong Buy Alert", "Strong Buy Signal")
alertcondition((bear and close >= StrongFilter), "Normal Sell Alert", "Normal Sell Signal")
alertcondition((bear and close < StrongFilter), "Strong Sell Alert", "Strong Sell Signal")
alertcondition(alert09, "SL Crossed Alert", "Stop Loss Crossed")
alertcondition(alert11, "TP1 Crossed Alert", "Target 1 Crossed")
alertcondition(alert12, "TP2 Crossed Alert", "Target 2 Crossed")
alertcondition(alert13, "TP3 Crossed Alert", "Target 3 Crossed")
// Input
fastLength = 12
slowLength = 26
srcceed = close
signalLength = 9
// Data reference
= ta.macd(srcceed, fastLength, slowLength, signalLength)
// 4 level of green
greenHighh = #7bff00
greenMidHighh = #7bff00
greenMidLowh = #7bff00
greenLowh = #7bff00
// Yellow
yellowLowh = #693d8e
// 4 level of red
redHighh = #ff0000
redMidHighh = #ff0000
redMidLowh = #ff0000
redLowh = #ff0000
// Default color
candleBodyd = yellowLowh
// Ranging trend
if hist > 0
if hist > hist and hist > 0
candleBodyd := greenLowh
if hist < 0
if hist < hist and hist < 0
candleBodyd := redLowh
// Bullish trend
if macdda > 0 and hist > 0
candleBodyd := greenMidLowh
if hist > hist and macd > 0 and hist > 0
candleBodyd := greenMidHighh
if hist > hist and macd > 0 and hist > 0
candleBodyd := greenHighh
// Bearish trend
if macdda < 0 and hist < 0
candleBodyd := redMidLowh
if hist < hist and macd < 0 and hist < 0
candleBodyd := redMidHighh
if hist < hist and macd < 0 and hist < 0
candleBodyd := redHighh
barcolor(candleBodyd) // Include suggestion by Shaheen204
//
tenkan_len = 365
tenkan_mult = 3
kijun_len = 365
kijun_mult = 7
spanB_len = 365
spanB_mult = 10
offset = 1
//------------------------------------------------------------------------------
avg(src,length,mult)=>
atr = ta.atr(50)*mult
up = hl2 + atr
dn = hl2 - atr
upper = 0.,lower = 0.
upper := src < upper ? math.min(up,upper ) : up
lower := src > lower ? math.max(dn,lower ) : dn
os = 0,max = 0.,min = 0.
os := src > upper ? 1 : src < lower ? 0 : os
spt = os == 1 ? lower : upper
max := ta.cross(src,spt) ? math.max(src,max ) : os == 1 ? math.max(src,max ) : spt
min := ta.cross(src,spt) ? math.min(src,min ) : os == 0 ? math.min(src,min ) : spt
math.avg(max,min)
//------------------------------------------------------------------------------
tenkan = avg(close,tenkan_len,tenkan_mult)
kijun = avg(close,kijun_len,kijun_mult)
senkouA = math.avg(kijun,tenkan)
senkouB = avg(close,spanB_len,spanB_mult)
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
//Smart Money Concept
settings = "Settings"
zigzag_len = input.int(9, "ZigZag Length", group=settings)
show_zigzag = input.bool(false, "Show Zigzag", group=settings)
fib_factor = input.float(0.33, "Fib Factor for breakout confirmation", 0, 1, 0.01, group=settings)
text_size = input.string(size.tiny, "Text Size", , group=settings)
delete_boxes = input.bool(true, "Delete Old/Broken Boxes", group=settings)
bu_ob_inline_color = "Bu-OB Colors"
be_ob_inline_color = "Be-OB Colors"
bu_bb_inline_color = "Bu-BB Colors"
be_bb_inline_color = "Be-BB Colors"
bu_ob_display_settings = "Bu-OB Display Settings"
bu_ob_color = input.color(color.new(color.green, 70), "Color", group=bu_ob_display_settings, inline=bu_ob_inline_color)
bu_ob_border_color = input.color(color.green, "Border Color", group=bu_ob_display_settings, inline=bu_ob_inline_color)
bu_ob_text_color = input.color(color.green, "Text Color", group=bu_ob_display_settings, inline=bu_ob_inline_color)
be_ob_display_settings = "Be-OB Display Settings"
be_ob_color = input.color(color.new(color.red, 70), "Color", group=be_ob_display_settings, inline=be_ob_inline_color)
be_ob_border_color = input.color(color.red, "Border Color", group=be_ob_display_settings, inline=be_ob_inline_color)
be_ob_text_color = input.color(color.red, "Text Color", group=be_ob_display_settings, inline=be_ob_inline_color)
bu_bb_display_settings = "Bu-BB & Bu-MB Display Settings"
bu_bb_color = input.color(color.new(color.green, 70), "Color", group=bu_bb_display_settings, inline=bu_bb_inline_color)
bu_bb_border_color = input.color(color.green, "Border Color", group=bu_bb_display_settings, inline=bu_bb_inline_color)
bu_bb_text_color = input.color(color.green, "Text Color", group=bu_bb_display_settings, inline=bu_bb_inline_color)
be_bb_display_settings = "Be-BB & Be-MB Display Settings"
be_bb_color = input.color(color.new(color.red, 70), "Color", group=be_bb_display_settings, inline=be_bb_inline_color)
be_bb_border_color = input.color(color.red, "Border Color", group=be_bb_display_settings, inline=be_bb_inline_color)
be_bb_text_color = input.color(color.red, "Text Color", group=be_bb_display_settings, inline=be_bb_inline_color)
var float high_points_arr = array.new_float(5)
var int high_index_arr = array.new_int(5)
var float low_points_arr = array.new_float(5)
var int low_index_arr = array.new_int(5)
var box bu_ob_boxes = array.new_box(5)
var box be_ob_boxes = array.new_box(5)
var box bu_bb_boxes = array.new_box(5)
var box be_bb_boxes = array.new_box(5)
to_up = high >= ta.highest(zigzag_len)
to_down = low <= ta.lowest(zigzag_len)
trend = 1
trend := nz(trend , 1)
trend := trend == 1 and to_down ? -1 : trend == -1 and to_up ? 1 : trend
last_trend_up_since = ta.barssince(to_up )
low_val = ta.lowest(nz(last_trend_up_since > 0 ? last_trend_up_since : 1, 1))
low_index = bar_index - ta.barssince(low_val == low)
last_trend_down_since = ta.barssince(to_down )
high_val = ta.highest(nz(last_trend_down_since > 0 ? last_trend_down_since : 1, 1))
high_index = bar_index - ta.barssince(high_val == high)
if ta.change(trend) != 0
if trend == 1
array.push(low_points_arr, low_val)
array.push(low_index_arr, low_index)
if trend == -1
array.push(high_points_arr, high_val)
array.push(high_index_arr, high_index)
f_get_high(ind) =>
f_get_low(ind) =>
f_delete_box(box_arr) =>
if delete_boxes
box.delete(array.shift(box_arr))
else
array.shift(box_arr)
0
= f_get_high(0)
= f_get_high(1)
= f_get_low(0)
= f_get_low(1)
if ta.change(trend) != 0 and show_zigzag
if trend == 1
line.new(h0i, h0, l0i, l0)
if trend == -1
line.new(l0i, l0, h0i, h0)
market = 1
market := nz(market , 1)
// market := market == 1 and close < l0 and low < l0 - math.abs(h0 - l0) * fib_factor ? -1 : market == -1 and close > h0 and high > h0 + math.abs(h0 - l0) * fib_factor ? 1 : market
last_l0 = ta.valuewhen(ta.change(market) != 0, l0, 0)
last_h0 = ta.valuewhen(ta.change(market) != 0, h0, 0)
market := last_l0 == l0 or last_h0 == h0 ? market : market == 1 and l0 < l1 and l0 < l1 - math.abs(h0 - l1) * fib_factor ? -1 : market == -1 and h0 > h1 and h0 > h1 + math.abs(h1 - l0) * fib_factor ? 1 : market
bu_ob_index = bar_index
bu_ob_index := nz(bu_ob_index , bar_index)
for i=h1i to l0i
index = bar_index - i
if open > close
bu_ob_index := bar_index
bu_ob_since = bar_index - bu_ob_index
be_ob_index = bar_index
be_ob_index := nz(be_ob_index , bar_index)
for i=l1i to h0i
index = bar_index - i
if open < close
be_ob_index := bar_index
be_ob_since = bar_index - be_ob_index
be_bb_index = bar_index
be_bb_index := nz(be_bb_index , bar_index)
for i=h1i - zigzag_len to l1i
index = bar_index - i
if open > close
be_bb_index := bar_index
be_bb_since = bar_index - be_bb_index
bu_bb_index = bar_index
bu_bb_index := nz(bu_bb_index , bar_index)
for i=l1i - zigzag_len to h1i
index = bar_index - i
if open < close
bu_bb_index := bar_index
bu_bb_since = bar_index - bu_bb_index
if ta.change(market) != 0
if market == 1
line.new(h1i, h1, h0i, h1, color=color.green, width=1)
label.new(int(math.avg(h1i, l0i)), h1, "BoS", color=color.new(color.black, 100), style=label.style_label_down, textcolor=color.green, size=size.small)
bu_ob = box.new(bu_ob_index, high , bar_index + 10, low , bgcolor=bu_ob_color, border_color=bu_ob_border_color, text="Bu-OB", text_color=bu_ob_text_color, text_halign=text.align_right, text_size=text_size)
bu_bb = box.new(bu_bb_index, high , bar_index + 10, low , bgcolor=bu_bb_color, border_color=bu_bb_border_color, text=l0 < l1 ? "Bu-BB" : "Bu-MB", text_color=bu_bb_text_color, text_halign=text.align_right, text_size=text_size)
array.push(bu_ob_boxes, bu_ob)
array.push(bu_bb_boxes, bu_bb)
if market == -1
line.new(l1i, l1, l0i, l1, color=color.red, width=1)
label.new(int(math.avg(l1i, h0i)), l1, "BoS", color=color.new(color.black, 100), style=label.style_label_up, textcolor=color.red, size=size.small)
be_ob = box.new(be_ob_index, high , bar_index + 10, low , bgcolor=be_ob_color, border_color=be_ob_border_color, text="Be-OB", text_color=be_ob_text_color, text_halign=text.align_right, text_size=text_size)
be_bb = box.new(be_bb_index, high , bar_index + 10, low , bgcolor=be_bb_color, border_color=be_bb_border_color, text=h0 > h1 ? "Be-BB" : "Be-MB", text_color=be_bb_text_color, text_halign=text.align_right, text_size=text_size)
array.push(be_ob_boxes, be_ob)
array.push(be_bb_boxes, be_bb)
for bull_ob in bu_ob_boxes
bottom = box.get_bottom(bull_ob)
top = box.get_top(bull_ob)
if close < bottom
f_delete_box(bu_ob_boxes)
else if close < top
alert("Price in the BU-OB zone")
else
box.set_right(bull_ob, bar_index + 10)
for bear_ob in be_ob_boxes
top = box.get_top(bear_ob)
bottom = box.get_bottom((bear_ob))
if close > top
f_delete_box(be_ob_boxes)
if close > bottom
alert("Price in the BE-OB zone")
else
box.set_right(bear_ob, bar_index + 10)
for bear_bb in be_bb_boxes
top = box.get_top(bear_bb)
bottom = box.get_bottom(bear_bb)
if close > top
f_delete_box(be_bb_boxes)
else if close > bottom
alert("Price in the BE-BB zone")
else
box.set_right(bear_bb, bar_index + 10)
for bull_bb in bu_bb_boxes
bottom = box.get_bottom(bull_bb)
top = box.get_top(bull_bb)
if close < bottom
f_delete_box(bu_bb_boxes)
else if close < top
alert("Price in the BU-BB zone")
else
box.set_right(bull_bb, bar_index + 10)
alertcondition(ta.change(market) != 0, "MSB", "MSB")
enableAutoTrend = input(true, "Enable Auto Trendlines", group="AUTO TRENDLINES SETTINGS")
srcTrendChannel = input(close, "Trend channel source", group="AUTO TRENDLINES SETTINGS")
lenTrendChannel = input.int(50, "Trend channel loopback", 2, group="AUTO TRENDLINES SETTINGS")
a = ta.wma(srcTrendChannel, lenTrendChannel), b = ta.sma(srcTrendChannel, lenTrendChannel)
A = 4 * b - 3 * a, B = 3 * a - 2 * b
m = (A - B) / (lenTrendChannel - 1)
d = 0., for i = 0 to lenTrendChannel - 1 by 1
l = B + m * i
d += math.pow(srcTrendChannel - l, 2)
rmse = math.sqrt(d / (lenTrendChannel - 1)) * 2
l(css, k) =>
line lr = enableAutoTrend ? line.new(bar_index - lenTrendChannel + 1, A + k, bar_index, B + k, extend=extend.right, color=css) : na
line.delete(lr )
l(#808080, rmse), l(#808080, 0), l(#808080,-rmse)
// ==========================================================================================
// === Dashboard with Telegram Link ===
var table myTable = table.new(position.top_center, 1, 1, border_width=1, frame_color=color.black, bgcolor=color.white)
table.cell(myTable, 0, 0, "", bgcolor=color.blue, text_color=color.white, text_size=size.normal)
INDIBOT ABO SALTAN
//@version=5
indicator("INDIBOT", shorttitle = "INDIBOT", overlay = true, max_lines_count = 500, max_labels_count = 500, max_boxes_count = 500, max_bars_back = 500, max_polylines_count = 100)
//-----------------------------------------------------------------------------{
//Boolean set
//-----------------------------------------------------------------------------{
s_BOS = 0
s_CHoCH = 1
i_BOS = 2
i_CHoCH = 3
i_pp_CHoCH = 4
green_candle = 5
red_candle = 6
s_CHoCHP = 7
i_CHoCHP = 8
boolean =
array.from(
false
, false
, false
, false
, false
, false
, false
, false
, false
)
//-----------------------------------------------------------------------------{
// User inputs
//-----------------------------------------------------------------------------{
show_swing_ms = input.string ("All" , "Swing " , inline = "1", group = "MARKET STRUCTURE" , options = )
show_internal_ms = input.string ("All" , "Internal " , inline = "2", group = "MARKET STRUCTURE" , options = )
internal_r_lookback = input.int (5 , "" , inline = "2", group = "MARKET STRUCTURE" , minval = 2)
swing_r_lookback = input.int (50 , "" , inline = "1", group = "MARKET STRUCTURE" , minval = 2)
ms_mode = input.string ("Manual" , "Market Structure Mode" , inline = "a", group = "MARKET STRUCTURE" , tooltip = " Use selected lenght Use automatic lenght" ,options = )
show_mtf_str = input.bool (true , "MTF Scanner" , inline = "9", group = "MARKET STRUCTURE" , tooltip = "Display Multi-Timeframe Market Structure Trend Directions. Green = Bullish. Red = Bearish")
show_eql = input.bool (false , "Show EQH/EQL" , inline = "6", group = "MARKET STRUCTURE")
plotcandle_bool = input.bool (false , "Plotcandle" , inline = "3", group = "MARKET STRUCTURE" , tooltip = "Displays a cleaner colored candlestick chart in place of the default candles. (requires hiding the current ticker candles)")
barcolor_bool = input.bool (false , "Bar Color" , inline = "4", group = "MARKET STRUCTURE" , tooltip = "Color the candle bodies according to market strucutre trend")
i_ms_up_BOS = input.color (#089981 , "" , inline = "2", group = "MARKET STRUCTURE")
i_ms_dn_BOS = input.color (#f23645 , "" , inline = "2", group = "MARKET STRUCTURE")
s_ms_up_BOS = input.color (#089981 , "" , inline = "1", group = "MARKET STRUCTURE")
s_ms_dn_BOS = input.color (#f23645 , "" , inline = "1", group = "MARKET STRUCTURE")
lvl_daily = input.bool (false , "Day " , inline = "1", group = "HIGHS & LOWS MTF")
lvl_weekly = input.bool (false , "Week " , inline = "2", group = "HIGHS & LOWS MTF")
lvl_monthly = input.bool (false , "Month" , inline = "3", group = "HIGHS & LOWS MTF")
lvl_yearly = input.bool (false , "Year " , inline = "4", group = "HIGHS & LOWS MTF")
css_d = input.color (color.blue , "" , inline = "1", group = "HIGHS & LOWS MTF")
css_w = input.color (color.blue , "" , inline = "2", group = "HIGHS & LOWS MTF")
css_m = input.color (color.blue , "" , inline = "3", group = "HIGHS & LOWS MTF")
css_y = input.color (color.blue , "" , inline = "4", group = "HIGHS & LOWS MTF")
s_d = input.string ('⎯⎯⎯' , '' , inline = '1', group = 'HIGHS & LOWS MTF' , options = )
s_w = input.string ('⎯⎯⎯' , '' , inline = '2', group = 'HIGHS & LOWS MTF' , options = )
s_m = input.string ('⎯⎯⎯' , '' , inline = '3', group = 'HIGHS & LOWS MTF' , options = )
s_y = input.string ('⎯⎯⎯' , '' , inline = '4', group = 'HIGHS & LOWS MTF' , options = )
ob_show = input.bool (true , "Show Last " , inline = "1", group = "VOLUMETRIC ORDER BLOCKS" , tooltip = "Display volumetric order blocks on the chart Ammount of volumetric order blocks to show")
ob_num = input.int (5 , "" , inline = "1", group = "VOLUMETRIC ORDER BLOCKS" , tooltip = "Orderblocks number", minval = 1, maxval = 10)
ob_metrics_show = input.bool (true , "Internal Buy/Sell Activity" , inline = "2", group = "VOLUMETRIC ORDER BLOCKS" , tooltip = "Display volume metrics that have formed the orderblock")
css_metric_up = input.color (color.new(#089981, 50) , " " , inline = "2", group = "VOLUMETRIC ORDER BLOCKS")
css_metric_dn = input.color (color.new(#f23645 , 50) , "" , inline = "2", group = "VOLUMETRIC ORDER BLOCKS")
ob_swings = input.bool (false , "Swing Order Blocks" , inline = "a", group = "VOLUMETRIC ORDER BLOCKS" , tooltip = "Display swing volumetric order blocks")
css_swing_up = input.color (color.new(color.gray , 90) , " " , inline = "a", group = "VOLUMETRIC ORDER BLOCKS")
css_swing_dn = input.color (color.new(color.silver, 90) , "" , inline = "a", group = "VOLUMETRIC ORDER BLOCKS")
ob_filter = input.string ("None" , "Filtering " , inline = "d", group = "VOLUMETRIC ORDER BLOCKS" , tooltip = "Filter out volumetric order blocks by BOS/CHoCH/CHoCH+", options = )
ob_mitigation = input.string ("Absolute" , "Mitigation " , inline = "4", group = "VOLUMETRIC ORDER BLOCKS" , tooltip = "Trigger to remove volumetric order blocks", options = )
ob_pos = input.string ("Precise" , "Positioning " , inline = "k", group = "VOLUMETRIC ORDER BLOCKS" , tooltip = "Position of the Order Block Cover the whole candle Cover half candle Adjust to volatility Same as Accurate but more precise", options = )
use_grayscale = input.bool (false , "Grayscale" , inline = "6", group = "VOLUMETRIC ORDER BLOCKS" , tooltip = "Use gray as basic order blocks color")
use_show_metric = input.bool (true , "Show Metrics" , inline = "7", group = "VOLUMETRIC ORDER BLOCKS" , tooltip = "Show volume associated with the orderblock and his relevance")
use_middle_line = input.bool (true , "Show Middle-Line" , inline = "8", group = "VOLUMETRIC ORDER BLOCKS" , tooltip = "Show mid-line order blocks")
use_overlap = input.bool (true , "Hide Overlap" , inline = "9", group = "VOLUMETRIC ORDER BLOCKS" , tooltip = "Hide overlapping order blocks")
use_overlap_method = input.string ("Previous" , "Overlap Method " , inline = "Z", group = "VOLUMETRIC ORDER BLOCKS" , tooltip = " Preserve the most recent volumetric order blocks Preserve the previous volumetric order blocks", options = )
ob_bull_css = input.color (color.new(#089981 , 90) , "" , inline = "1", group = "VOLUMETRIC ORDER BLOCKS")
ob_bear_css = input.color (color.new(#f23645 , 90) , "" , inline = "1", group = "VOLUMETRIC ORDER BLOCKS")
show_acc_dist_zone = input.bool (false , "" , inline = "1", group = "Accumulation And Distribution")
zone_mode = input.string ("Fast" , "" , inline = "1", group = "Accumulation And Distribution" , tooltip = " Find small zone pattern formation Find bigger zone pattern formation" ,options = )
acc_css = input.color (color.new(#089981 , 60) , "" , inline = "1", group = "Accumulation And Distribution")
dist_css = input.color (color.new(#f23645 , 60) , "" , inline = "1", group = "Accumulation And Distribution")
show_lbl = input.bool (true , "Show swing point" , inline = "1", group = "High and Low" , tooltip = "Display swing point")
show_mtb = input.bool (true , "Show High/Low/Equilibrium" , inline = "2", group = "High and Low" , tooltip = "Display Strong/Weak High And Low and Equilibrium")
toplvl = input.color (color.red , "Premium Zone " , inline = "3", group = "High and Low")
midlvl = input.color (color.gray , "Equilibrium Zone" , inline = "4", group = "High and Low")
btmlvl = input.color (#089981 , "Discount Zone " , inline = "5", group = "High and Low")
fvg_enable = input.bool (false , " " , inline = "1", group = "FAIR VALUE GAP" , tooltip = "Display fair value gap")
what_fvg = input.string ("FVG" , "" , inline = "1", group = "FAIR VALUE GAP" , tooltip = "Display fair value gap", options = )
fvg_num = input.int (5 , "Show Last " , inline = "1a", group = "FAIR VALUE GAP" , tooltip = "Number of fvg to show")
fvg_upcss = input.color (color.new(#089981, 80) , "" , inline = "1", group = "FAIR VALUE GAP")
fvg_dncss = input.color (color.new(color.red , 80) , "" , inline = "1", group = "FAIR VALUE GAP")
fvg_extend = input.int (10 , "Extend FVG" , inline = "2", group = "FAIR VALUE GAP" , tooltip = "Extend the display of the FVG.")
fvg_src = input.string ("Close" , "Mitigation " , inline = "3", group = "FAIR VALUE GAP" , tooltip = " Use the close of the body as trigger Use the extreme point of the body as trigger", options = )
fvg_tf = input.timeframe ("" , "Timeframe " , inline = "4", group = "FAIR VALUE GAP" , tooltip = "Timeframe of the fair value gap")
t = color.t (ob_bull_css)
invcol = color.new (color.white , 100)
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{ - UDT }
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
type bar
float o = open
float c = close
float h = high
float l = low
float v = volume
int n = bar_index
int t = time
type Zphl
line top
line bottom
label top_label
label bottom_label
bool stopcross
bool sbottomcross
bool itopcross
bool ibottomcross
string txtup
string txtdn
float topy
float bottomy
float topx
float bottomx
float tup
float tdn
int tupx
int tdnx
float itopy
float itopx
float ibottomy
float ibottomx
float uV
float dV
type FVG
box box
line ln
bool bull
float top
float btm
int left
int right
type ms
float p
int n
float l
type msDraw
int n
float p
color css
string txt
bool bull
type obC
float top
float btm
int left
float avg
float dV
float cV
int wM
int blVP
int brVP
int dir
float h
float l
int n
type obD
box ob
box eOB
box blB
box brB
line mL
type zone
chart.point points
float p
int c
int t
type hqlzone
box pbx
box ebx
box lbx
label plb
label elb
label lbl
type ehl
float pt
int t
float pb
int b
type pattern
string found = "None"
bool isfound = false
int period = 0
bool bull = false
type alerts
bool chochswing = false
bool chochplusswing = false
bool swingbos = false
bool chochplus = false
bool choch = false
bool bos = false
bool equal = false
bool ob = false
bool swingob = false
bool zone = false
bool fvg = false
bool obtouch = false
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{ - End }
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{ - General Setup }
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
bar b = bar.new()
var pattern p = pattern.new()
alerts blalert = alerts.new()
alerts bralert = alerts.new()
if p.isfound
p.period += 1
if p.period == 50
p.period := 0
p.found := "None"
p.isfound := false
p.bull := na
switch
b.c > b.o => boolean.set(green_candle, true)
b.c < b.o => boolean.set(red_candle , true)
f_zscore(src, lookback) =>
(src - ta.sma(src, lookback)) / ta.stdev(src, lookback)
var int iLen = internal_r_lookback
var int sLen = swing_r_lookback
vv = f_zscore(((close - close ) / close ) * 100,iLen)
if ms_mode == "Dynamic"
switch
vv >= 1.5 or vv <= -1.5 => iLen := 10
vv >= 1.6 or vv <= -1.6 => iLen := 9
vv >= 1.7 or vv <= -1.7 => iLen := 8
vv >= 1.8 or vv <= -1.8 => iLen := 7
vv >= 1.9 or vv <= -1.9 => iLen := 6
vv >= 2.0 or vv <= -2.0 => iLen := 5
=> iLen
var msline = array.new(0)
iH = ta.pivothigh(high, iLen, iLen)
sH = ta.pivothigh(high, sLen, sLen)
iL = ta.pivotlow (low , iLen, iLen)
sL = ta.pivotlow (low , sLen, sLen)
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{ - End }
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{ - ARRAYS }
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
hl () =>
= request.security(syminfo.tickerid , 'D' , hl() , lookahead = barmerge.lookahead_on)
= request.security(syminfo.tickerid , 'W' , hl() , lookahead = barmerge.lookahead_on)
= request.security(syminfo.tickerid , 'M' , hl() , lookahead = barmerge.lookahead_on)
= request.security(syminfo.tickerid , '12M', hl() , lookahead = barmerge.lookahead_on)
lstyle(style) =>
out = switch style
'⎯⎯⎯' => line.style_solid
'----' => line.style_dashed
'····' => line.style_dotted
mtfphl(h, l ,tf ,css, pdhl_style) =>
var line hl = line.new(
na
, na
, na
, na
, xloc = xloc.bar_time
, color = css
, style = lstyle(pdhl_style)
)
var line ll = line.new(
na
, na
, na
, na
, xloc = xloc.bar_time
, color = css
, style = lstyle(pdhl_style)
)
var label lbl = label.new(
na
, na
, xloc = xloc.bar_time
, text = str.format('P{0}L', tf)
, color = invcol
, textcolor = css
, size = size.small
, style = label.style_label_left
)
var label hlb = label.new(
na
, na
, xloc = xloc.bar_time
, text = str.format('P{0}H', tf)
, color = invcol
, textcolor = css
, size = size.small
, style = label.style_label_left
)
hy = ta.valuewhen(h != h , h , 1)
hx = ta.valuewhen(h == high , time , 1)
ly = ta.valuewhen(l != l , l , 1)
lx = ta.valuewhen(l == low , time , 1)
if barstate.islast
extension = time + (time - time ) * 50
line.set_xy1(hl , hx , hy)
line.set_xy2(hl , extension , hy)
label.set_xy(hlb, extension , hy)
line.set_xy1(ll , lx , ly)
line.set_xy2(ll , extension , ly)
label.set_xy(lbl, extension , ly)
if lvl_daily
mtfphl(pdh , pdl , 'D' , css_d, s_d)
if lvl_weekly
mtfphl(pwh , pwl , 'W' , css_w, s_w)
if lvl_monthly
mtfphl(pmh , pml, 'M' , css_m, s_m)
if lvl_yearly
mtfphl(pyh , pyl , '12M', css_y, s_y)
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{ - End }
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{ - Market Structure }
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
method darkcss(color css, float factor, bool bull) =>
blue = color.b(css) * (1 - factor)
red = color.r(css) * (1 - factor)
green = color.g(css) * (1 - factor)
color.rgb(red, green, blue, 0)
method f_line(msDraw d, size, style) =>
var line id = na
var label lbl = na
id := line.new(
d.n
, d.p
, b.n
, d.p
, color = d.css
, width = 1
, style = style
)
if msline.size() >= 250
line.delete(msline.shift())
msline.push(id)
lbl := label.new(
int(math.avg(d.n, b.n))
, d.p
, d.txt
, color = invcol
, textcolor = d.css
, style = d.bull ? label.style_label_down : label.style_label_up
, size = size
, text_font_family = font.family_monospace
)
structure(bool mtf) =>
msDraw drw = na
bool isdrw = false
bool isdrwS = false
var color css = na
var color icss = na
var int itrend = 0
var int trend = 0
bool bull_ob = false
bool bear_ob = false
bool s_bull_ob = false
bool s_bear_ob = false
n = bar_index
var ms up = ms.new(
array.new()
, array.new< int >()
, array.new()
)
var ms dn = ms.new(
array.new()
, array.new< int >()
, array.new()
)
var ms sup = ms.new(
array.new()
, array.new< int >()
, array.new()
)
var ms sdn = ms.new(
array.new()
, array.new< int >()
, array.new()
)
switch show_swing_ms
"All" => boolean.set(s_BOS , true ), boolean.set(s_CHoCH, true ) , boolean.set(s_CHoCHP, true )
"CHoCH" => boolean.set(s_BOS , false), boolean.set(s_CHoCH, true ) , boolean.set(s_CHoCHP, false )
"CHoCH+" => boolean.set(s_BOS , false), boolean.set(s_CHoCH, false) , boolean.set(s_CHoCHP, true )
"BOS" => boolean.set(s_BOS , true ), boolean.set(s_CHoCH, false) , boolean.set(s_CHoCHP, false )
"None" => boolean.set(s_BOS , false), boolean.set(s_CHoCH, false) , boolean.set(s_CHoCHP, false )
=> na
switch show_internal_ms
"All" => boolean.set(i_BOS, true ), boolean.set(i_CHoCH, true ), boolean.set(i_CHoCHP, true )
"CHoCH" => boolean.set(i_BOS, false), boolean.set(i_CHoCH, true ), boolean.set(i_CHoCHP, false)
"CHoCH+" => boolean.set(i_BOS, false), boolean.set(i_CHoCH, false ), boolean.set(i_CHoCHP, true )
"BOS" => boolean.set(i_BOS, true ), boolean.set(i_CHoCH, false ), boolean.set(i_CHoCHP, false)
"None" => boolean.set(i_BOS, false), boolean.set(i_CHoCH, false ), boolean.set(i_CHoCHP, false)
=> na
switch
iH =>
up.p.unshift(b.h )
up.l.unshift(b.h )
up.n.unshift(n )
iL =>
dn.p.unshift(b.l )
dn.l.unshift(b.l )
dn.n.unshift(n )
sL =>
sdn.p.unshift(b.l )
sdn.l.unshift(b.l )
sdn.n.unshift(n )
sH =>
sup.p.unshift(b.h )
sup.l.unshift(b.h )
sup.n.unshift(n )
// INTERNAL BULLISH STRUCTURE
if up.p.size() > 0 and dn.l.size() > 1
if ta.crossover(b.c, up.p.first())
bool CHoCH = na
string txt = na
if itrend < 0
CHoCH := true
switch
not CHoCH =>
txt := "BOS"
css := i_ms_up_BOS
blalert.bos := true
if boolean.get(i_BOS) and mtf == false and na(drw)
isdrw := true
drw := msDraw.new(
up.n.first()
, up.p.first()
, i_ms_up_BOS
, txt
, true
)
CHoCH =>
dn.l.first() > dn.l.get(1) ? blalert.chochplus : blalert.choch
txt := dn.l.first() > dn.l.get(1) ? "CHoCH+" : "CHoCH"
css := i_ms_up_BOS.darkcss(0.25, true)
if (dn.l.first() > dn.l.get(1) ? boolean.get(i_CHoCHP) : boolean.get(i_CHoCH)) and mtf == false and na(drw)
isdrw := true
drw := msDraw.new(
up.n.first()
, up.p.first()
, i_ms_up_BOS.darkcss(0.25, true)
, txt
, true
)
if mtf == false
switch
ob_filter == "None" => bull_ob := true
ob_filter == "BOS" and txt == "BOS" => bull_ob := true
ob_filter == "CHoCH" and txt == "CHoCH" => bull_ob := true
ob_filter == "CHoCH+" and txt == "CHoCH+" => bull_ob := true
itrend := 1
up.n.clear()
up.p.clear()
// INTERNAL BEARISH STRUCTURE
if dn.p.size() > 0 and up.l.size() > 1
if ta.crossunder(b.c, dn.p.first())
bool CHoCH = na
string txt = na
if itrend > 0
CHoCH := true
switch
not CHoCH =>
bralert.bos := true
txt := "BOS"
css := i_ms_dn_BOS
if boolean.get(i_BOS) and mtf == false and na(drw)
isdrw := true
drw := msDraw.new(
dn.n.first()
, dn.p.first()
, i_ms_dn_BOS
, txt
, false
)
CHoCH =>
if up.l.first() < up.l.get(1)
bralert.chochplus := true
else
bralert.choch := true
txt := up.l.first() < up.l.get(1) ? "CHoCH+" : "CHoCH"
css := i_ms_dn_BOS.darkcss(0.25, false)
if (up.l.first() < up.l.get(1) ? boolean.get(i_CHoCHP) : boolean.get(i_CHoCH)) and mtf == false and na(drw)
isdrw := true
drw := msDraw.new(
dn.n.first()
, dn.p.first()
, i_ms_dn_BOS.darkcss(0.25, false)
, txt
, false
)
if mtf == false
switch
ob_filter == "None" => bear_ob := true
ob_filter == "BOS" and txt == "BOS" => bear_ob := true
ob_filter == "CHoCH" and txt == "CHoCH" => bear_ob := true
ob_filter == "CHoCH+" and txt == "CHoCH+" => bear_ob := true
itrend := -1
dn.n.clear()
dn.p.clear()
// SWING BULLISH STRUCTURE
if sup.p.size() > 0 and sdn.l.size() > 1
if ta.crossover(b.c, sup.p.first())
bool CHoCH = na
string txt = na
if trend < 0
CHoCH := true
switch
not CHoCH =>
blalert.swingbos := true
txt := "BOS"
icss := s_ms_up_BOS
if boolean.get(s_BOS) and mtf == false and na(drw)
isdrwS := true
drw := msDraw.new(
sup.n.first()
, sup.p.first()
, s_ms_up_BOS
, txt
, true
)
CHoCH =>
if sdn.l.first() > sdn.l.get(1)
blalert.chochplusswing := true
else
blalert.chochswing := true
txt := sdn.l.first() > sdn.l.get(1) ? "CHoCH+" : "CHoCH"
icss := s_ms_up_BOS.darkcss(0.25, true)
if (sdn.l.first() > sdn.l.get(1) ? boolean.get(s_CHoCHP) : boolean.get(s_CHoCH)) and mtf == false and na(drw)
isdrwS := true
drw := msDraw.new(
sup.n.first()
, sup.p.first()
, s_ms_up_BOS.darkcss(0.25, true)
, txt
, true
)
if mtf == false
switch
ob_filter == "None" => s_bull_ob := true
ob_filter == "BOS" and txt == "BOS" => s_bull_ob := true
ob_filter == "CHoCH" and txt == "CHoCH" => s_bull_ob := true
ob_filter == "CHoCH+" and txt == "CHoCH+" => s_bull_ob := true
trend := 1
sup.n.clear()
sup.p.clear()
// SWING BEARISH STRUCTURE
if sdn.p.size() > 0 and sup.l.size() > 1
if ta.crossunder(b.c, sdn.p.first())
bool CHoCH = na
string txt = na
if trend > 0
CHoCH := true
switch
not CHoCH =>
bralert.swingbos := true
txt := "BOS"
icss := s_ms_dn_BOS
if boolean.get(s_BOS) and mtf == false and na(drw)
isdrwS := true
drw := msDraw.new(
sdn.n.first()
, sdn.p.first()
, s_ms_dn_BOS
, txt
, false
)
CHoCH =>
if sup.l.first() < sup.l.get(1)
bralert.chochplusswing := true
else
bralert.chochswing := true
txt := sup.l.first() < sup.l.get(1) ? "CHoCH+" : "CHoCH"
icss := s_ms_dn_BOS.darkcss(0.25, false)
if (sup.l.first() < sup.l.get(1) ? boolean.get(s_CHoCHP) : boolean.get(s_CHoCH)) and mtf == false and na(drw)
isdrwS := true
drw := msDraw.new(
sdn.n.first()
, sdn.p.first()
, s_ms_dn_BOS.darkcss(0.25, false)
, txt
, false
)
if mtf == false
switch
ob_filter == "None" => s_bear_ob := true
ob_filter == "BOS" and txt == "BOS" => s_bear_ob := true
ob_filter == "CHoCH" and txt == "CHoCH" => s_bear_ob := true
ob_filter == "CHoCH+" and txt == "CHoCH+" => s_bear_ob := true
trend := -1
sdn.n.clear()
sdn.p.clear()
= structure(false)
if isdrw
f_line(drw, size.small, line.style_dashed)
if isdrwS
f_line(drw, size.small, line.style_solid)
= request.security("", "15" , structure(true))
= request.security("", "60" , structure(true))
= request.security("", "240" , structure(true))
= request.security("", "1440" , structure(true))
if show_mtf_str
var tab = table.new(position = position.top_right, columns = 10, rows = 10, bgcolor = na, frame_color = color.rgb(54, 58, 69, 0), frame_width = 1, border_color = color.rgb(54, 58, 69, 100), border_width = 1)
table.cell(tab, 0, 1, text = "15" , text_color = color.silver, text_halign = text.align_center, text_size = size.normal, bgcolor = chart.bg_color, text_font_family = font.family_monospace, width = 2)
table.cell(tab, 0, 2, text = "1H" , text_color = color.silver, text_halign = text.align_center, text_size = size.normal, bgcolor = chart.bg_color, text_font_family = font.family_monospace, width = 2)
table.cell(tab, 0, 3, text = "4H" , text_color = color.silver, text_halign = text.align_center, text_size = size.normal, bgcolor = chart.bg_color, text_font_family = font.family_monospace, width = 2)
table.cell(tab, 0, 4, text = "1D" , text_color = color.silver, text_halign = text.align_center, text_size = size.normal, bgcolor = chart.bg_color, text_font_family = font.family_monospace, width = 2)
table.cell(tab, 1, 1, text = itrend15 == 1 ? "BULLISH" : itrend15 == -1 ? "BEARISH" : na , text_halign = text.align_center, text_size = size.normal, text_color = itrend15 == 1 ? i_ms_up_BOS.darkcss(-0.25, true) : itrend15 == -1 ? i_ms_dn_BOS.darkcss(0.25, false) : color.gray, bgcolor = chart.bg_color, text_font_family = font.family_monospace)
table.cell(tab, 1, 2, text = itrend1H == 1 ? "BULLISH" : itrend1H == -1 ? "BEARISH" : na , text_halign = text.align_center, text_size = size.normal, text_color = itrend1H == 1 ? i_ms_up_BOS.darkcss(-0.25, true) : itrend1H == -1 ? i_ms_dn_BOS.darkcss(0.25, false) : color.gray, bgcolor = chart.bg_color, text_font_family = font.family_monospace)
table.cell(tab, 1, 3, text = itrend4H == 1 ? "BULLISH" : itrend4H == -1 ? "BEARISH" : na , text_halign = text.align_center, text_size = size.normal, text_color = itrend4H == 1 ? i_ms_up_BOS.darkcss(-0.25, true) : itrend4H == -1 ? i_ms_dn_BOS.darkcss(0.25, false) : color.gray, bgcolor = chart.bg_color, text_font_family = font.family_monospace)
table.cell(tab, 1, 4, text = itrend1D == 1 ? "BULLISH" : itrend1D == -1 ? "BEARISH" : na , text_halign = text.align_center, text_size = size.normal, text_color = itrend1D == 1 ? i_ms_up_BOS.darkcss(-0.25, true) : itrend1D == -1 ? i_ms_dn_BOS.darkcss(0.25, false) : color.gray, bgcolor = chart.bg_color, text_font_family = font.family_monospace)
table.cell(tab, 0, 5, text = "Detected Pattern", text_halign = text.align_center, text_size = size.normal, text_color = color.silver, bgcolor = chart.bg_color, text_font_family = font.family_monospace)
table.cell(tab, 0, 6, text = p.found, text_halign = text.align_center, text_size = size.normal, text_color = na(p.bull) ? color.white : p.bull ? i_ms_up_BOS.darkcss(-0.25, true) : p.bull == false ? i_ms_dn_BOS.darkcss(0.25, false) : na, bgcolor = chart.bg_color, text_font_family = font.family_monospace)
table.merge_cells(tab, 0, 5, 1, 5)
table.merge_cells(tab, 0, 6, 1, 6)
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{ - End }
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{ - Strong/Weak High/Low And Equilibrium }
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
var phl = Zphl.new(
na
, na
, label.new(na , na , color = invcol , textcolor = i_ms_dn_BOS , style = label.style_label_down , size = size.tiny , text = "")
, label.new(na , na , color = invcol , textcolor = i_ms_up_BOS , style = label.style_label_up , size = size.tiny , text = "")
, true
, true
, true
, true
, ""
, ""
, 0
, 0
, 0
, 0
, high
, low
, 0
, 0
, 0
, 0
, 0
, 0
, na
, na
)
zhl(len)=>
upper = ta.highest(len)
lower = ta.lowest(len)
var float out = 0
out := b.h > upper ? 0 : b.l < lower ? 1 : out
top = out == 0 and out != 0 ? b.h : 0
btm = out == 1 and out != 1 ? b.l : 0
= zhl(sLen)
= zhl(iLen)
upphl(trend) =>
var label lbl = label.new(
na
, na
, color = invcol
, textcolor = toplvl
, style = label.style_label_down
, size = size.small
)
if top
phl.stopcross := true
phl.txtup := top > phl.topy ? "HH" : "HL"
if show_lbl
topl = label.new(
b.n - swing_r_lookback
, top
, phl.txtup
, color = invcol
, textcolor = toplvl
, style = label.style_label_down
, size = size.small
)
line.delete(phl.top )
phl.top := line.new(
b.n - sLen
, top
, b.n
, top
, color = toplvl)
phl.topy := top
phl.topx := b.n - sLen
phl.tup := top
phl.tupx := b.n - sLen
if itop
phl.itopcross := true
phl.itopy := itop
phl.itopx := b.n - iLen
phl.tup := math.max(high, phl.tup)
phl.tupx := phl.tup == high ? b.n : phl.tupx
phl.uV := phl.tup != phl.tup ? b.v : phl.uV
if barstate.islast
line.set_xy1(
phl.top
, phl.tupx
, phl.tup
)
line.set_xy2(
phl.top
, b.n + 50
, phl.tup
)
label.set_x(
lbl
, b.n + 50
)
label.set_y(
lbl
, phl.tup
)
dist = math.abs(phl.uV / (phl.uV + phl.dV)) * 100
label.set_text (lbl, trend < 0
? "Strong High | " + str.tostring(phl.uV, format.volume) + " (" + str.tostring(math.round(dist,0)) + "%)"
: "Weak High | " + str.tostring(phl.uV, format.volume) + " (" + str.tostring(math.round(dist,0)) + "%)")
dnphl(trend) =>
var label lbl = label.new(
na
, na
, color = invcol
, textcolor = btmlvl
, style = label.style_label_up
, size = size.small
)
if btm
phl.sbottomcross := true
phl.txtdn := btm > phl.bottomy ? "LH" : "LL"
if show_lbl
btml = label.new(
b.n - swing_r_lookback
, btm, phl.txtdn
, color = invcol
, textcolor = btmlvl
, style = label.style_label_up
, size = size.small
)
line.delete(phl.bottom )
phl.bottom := line.new(
b.n - sLen
, btm
, b.n
, btm
, color = btmlvl
)
phl.bottomy := btm
phl.bottomx := b.n - sLen
phl.tdn := btm
phl.tdnx := b.n - sLen
if ibtm
phl.ibottomcross := true
phl.ibottomy := ibtm
phl.ibottomx := b.n - iLen
phl.tdn := math.min(low, phl.tdn)
phl.tdnx := phl.tdn == low ? b.n : phl.tdnx
phl.dV := phl.tdn != phl.tdn ? b.v : phl.dV
if barstate.islast
line.set_xy1(
phl.bottom
, phl.tdnx
, phl.tdn
)
line.set_xy2(
phl.bottom
, b.n + 50
, phl.tdn
)
label.set_x(
lbl
, b.n + 50
)
label.set_y(
lbl
, phl.tdn
)
dist = math.abs(phl.dV / (phl.uV + phl.dV)) * 100
label.set_text (lbl, trend > 0
? "Strong Low | " + str.tostring(phl.dV, format.volume) + " (" + str.tostring(math.round(dist,0)) + "%)"
: "Weak Low | " + str.tostring(phl.uV, format.volume) + " (" + str.tostring(math.round(dist,0)) + "%)")
midphl() =>
avg = math.avg(phl.bottom.get_y2(), phl.top.get_y2())
var line l = line.new(
y1 = avg
, y2 = avg
, x1 = b.n - sLen
, x2 = b.n + 50
, color = midlvl
, style = line.style_solid
)
var label lbl = label.new(
x = b.n + 50
, y = avg
, text = "Equilibrium"
, style = label.style_label_left
, color = invcol
, textcolor = midlvl
, size = size.small
)
if barstate.islast
more = (phl.bottom.get_x1() + phl.bottom.get_x2()) > (phl.top.get_x1() + phl.top.get_x2()) ? phl.top.get_x1() : phl.bottom.get_x1()
line.set_xy1(l , more , avg)
line.set_xy2(l , b.n + 50, avg)
label.set_x (lbl , b.n + 50 )
label.set_y (lbl , avg )
dist = math.abs((l.get_y2() - close) / close) * 100
label.set_text (lbl, "Equilibrium (" + str.tostring(math.round(dist,0)) + "%)")
hqlzone() =>
if barstate.islast
var hqlzone dZone = hqlzone.new(
box.new(
na
, na
, na
, na
, bgcolor = color.new(toplvl, 70)
, border_color = na
)
, box.new(
na
, na
, na
, na
, bgcolor = color.new(midlvl, 70)
, border_color = na
)
, box.new(
na
, na
, na
, na
, bgcolor = color.new(btmlvl, 70)
, border_color = na
)
, label.new(na, na, text = "Premium" , color = invcol, textcolor = toplvl, style = label.style_label_down, size = size.small)
, label.new(na, na, text = "Equilibrium", color = invcol, textcolor = midlvl, style = label.style_label_left, size = size.small)
, label.new(na, na, text = "Discount" , color = invcol, textcolor = btmlvl, style = label.style_label_up , size = size.small)
)
dZone.pbx.set_lefttop(int(math.max(phl.topx, phl.bottomx)) , phl.tup)
dZone.pbx.set_rightbottom(b.n + 50 , 0.95 * phl.tup + 0.05 * phl.tdn)
dZone.ebx.set_lefttop(int(math.max(phl.topx, phl.bottomx)), 0.525 * phl.tup + 0.475 * phl.tdn)
dZone.ebx.set_rightbottom(b.n + 50 , 0.525 * phl.tdn + 0.475 * phl.tup)
dZone.lbx.set_lefttop(int(math.max(phl.topx, phl.bottomx)), 0.95 * phl.tdn + 0.05 * phl.tup)
dZone.lbx.set_rightbottom(b.n + 50 , phl.tdn)
dZone.plb.set_xy( int(math.avg(math.max(phl.topx, phl.bottomx), int(b.n + 50))) , phl.tup)
dZone.elb.set_xy( int(b.n + 50) , math.avg(phl.tup, phl.tdn))
dZone.lbl.set_xy( int(math.avg(math.max(phl.topx, phl.bottomx), int(b.n + 50))) , phl.tdn)
if show_mtb
upphl (trend)
dnphl (trend)
hqlzone()
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{ - End }
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{ - Volumetric Order Block }
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
method eB(box b, bool ext, color css, bool swing) =>
b.unshift(
box.new(
na
, na
, na
, na
, xloc = xloc.bar_time
, text_font_family = font.family_monospace
, extend = ext ? extend.right : extend.none
, border_color = swing ? color.new(css, 0) : color.new(color.white,100)
, bgcolor = css
, border_width = 1
)
)
method eL(line l, bool ext, bool solid, color css) =>
l.unshift(
line.new(
na
, na
, na
, na
, width = 1
, color = css
, xloc = xloc.bar_time
, extend = ext ? extend.right : extend.none
, style = solid ? line.style_solid : line.style_dashed
)
)
method drawVOB(bool cdn, bool bull, color css, int loc, bool swing) =>
= request.security(
syminfo.tickerid
, ""
,
, lookahead = barmerge.lookahead_off
)
var obC obj = obC.new(
array.new()
, array.new()
, array.new< int >()
, array.new()
, array.new()
, array.new()
, array.new< int >()
, array.new< int >()
, array.new< int >()
, array.new< int >()
, array.new()
, array.new()
, array.new< int >()
)
var obD draw = obD.new(
array.new()
, array.new()
, array.new()
, array.new()
, array.new()
)
if barstate.isfirst
for i = 0 to ob_num - 1
draw.mL .eL(false, false, use_grayscale ? color.new(color.gray, 0) : color.new(css,0))
draw.ob .eB(false, use_grayscale ? color.new(color.gray, 90) : css, swing)
draw.blB.eB(false, css_metric_up , swing)
draw.brB.eB(false, css_metric_dn , swing)
draw.eOB.eB(true , use_grayscale ? color.new(color.gray, 90) : css, swing)
float pos = ob_pos == "Full"
? (bull ? high : low)
: ob_pos == "Middle"
? ohlc4
: ob_pos == "Accurate"
? hl2
: hl2
if cdn
obj.h.clear()
obj.l.clear()
obj.n.clear()
for i = 0 to math.abs((loc - b.n)) - 1
obj.h.push(hH )
obj.l.push(lL )
obj.n.push(b.t )
// obj.h.reverse()
// obj.l.reverse()
int iU = obj.l.indexof(obj.l.min()) + 1
int iD = obj.h.indexof(obj.h.max()) + 1
obj.dir.unshift(
bull
? (b.c > b.o ? 1 : -1)
: (b.c > b.o ? 1 : -1)
)
obj.top.unshift(
bull
? pos
: obj.h.max()
)
obj.btm.unshift(
bull
? obj.l.min()
: pos
)
obj.left.unshift(
bull
? obj.n.get(obj.l.indexof(obj.l.min()))
: obj.n.get(obj.h.indexof(obj.h.max()))
)
obj.avg.unshift(
math.avg(obj.top.first(), obj.btm.first())
)
obj.cV.unshift(
bull
? b.v
: b.v
)
if ob_pos == "Precise"
switch bull
true =>
if obj.avg.get(0) < (b.c < b.o ? b.c : b.o ) and obj.top.get(0) > hlcc4
obj.top.set(0, obj.avg.get(0))
obj.avg.set(0, math.avg(obj.top.first(), obj.btm.first()))
false =>
if obj.avg.get(0) > (b.c < b.o ? b.o : b.c ) and obj.btm.get(0) < hlcc4
obj.btm.set(0, obj.avg.get(0))
obj.avg.set(0, math.avg(obj.top.first(), obj.btm.first()))
obj.blVP.unshift ( 0 )
obj.brVP.unshift ( 0 )
obj.wM .unshift ( 1 )
if use_overlap
int rmP = use_overlap_method == "Recent" ? 1 : 0
if obj.avg.size() > 1
if bull
? obj.btm.first() < obj.top.get(1)
: obj.top.first() > obj.btm.get(1)
obj.wM .remove(rmP)
obj.cV .remove(rmP)
obj.dir .remove(rmP)
obj.top .remove(rmP)
obj.avg .remove(rmP)
obj.btm .remove(rmP)
obj.left .remove(rmP)
obj.blVP .remove(rmP)
obj.brVP .remove(rmP)
if barstate.isconfirmed
for x = 0 to ob_num - 1
tg = switch ob_mitigation
"Middle" => obj.avg
"Absolute" => bull ? obj.btm : obj.top
for in tg
if (bull ? cC < pt : cC > pt)
obj.wM .remove(idx)
obj.cV .remove(idx)
obj.dir .remove(idx)
obj.top .remove(idx)
obj.avg .remove(idx)
obj.btm .remove(idx)
obj.left .remove(idx)
obj.blVP .remove(idx)
obj.brVP .remove(idx)
if barstate.islast
if obj.avg.size() > 0
// Alert
if bull
? ta.crossunder(low , obj.top.get(0))
: ta.crossover (high, obj.btm.get(0))
switch bull
true => blalert.obtouch := true
false => bralert.obtouch := true
float tV = 0
obj.dV.clear()
seq = math.min(ob_num - 1, obj.avg.size() - 1)
for j = 0 to seq
tV += obj.cV.get(j)
if j == seq
for y = 0 to seq
obj.dV.unshift(
math.floor(
(obj.cV.get(y) / tV) * 100)
)
obj.dV.reverse()
for i = 0 to math.min(ob_num - 1, obj.avg.size() - 1)
dmL = draw.mL .get(i)
dOB = draw.ob .get(i)
dblB = draw.blB.get(i)
dbrB = draw.brB.get(i)
deOB = draw.eOB.get(i)
dOB.set_lefttop (obj.left .get(i) , obj.top.get(i))
deOB.set_lefttop (b.t , obj.top.get(i))
dOB.set_rightbottom (b.t , obj.btm.get(i))
deOB.set_rightbottom(b.t + (b.t - b.t ) * 100 , obj.btm.get(i))
if use_middle_line
dmL.set_xy1(obj.left.get(i), obj.avg.get(i))
dmL.set_xy2(b.t , obj.avg.get(i))
if ob_metrics_show
dblB.set_lefttop (obj.left.get(i), obj.top.get(i))
dbrB.set_lefttop (obj.left.get(i), obj.avg.get(i))
dblB.set_rightbottom(obj.left.get(i), obj.avg.get(i))
dbrB.set_rightbottom(obj.left.get(i), obj.btm.get(i))
rpBL = dblB.get_right()
rpBR = dbrB.get_right()
dbrB.set_right(rpBR + (b.t - b.t ) * obj.brVP.get(i))
dblB.set_right(rpBL + (b.t - b.t ) * obj.blVP.get(i))
if use_show_metric
txt = switch
obj.cV.get(i) >= 1000000000 => str.tostring(math.round(obj.cV.get(i) / 1000000000,3)) + "B"
obj.cV.get(i) >= 1000000 => str.tostring(math.round(obj.cV.get(i) / 1000000,3)) + "M"
obj.cV.get(i) >= 1000 => str.tostring(math.round(obj.cV.get(i) / 1000,3)) + "K"
obj.cV.get(i) < 1000 => str.tostring(math.round(obj.cV.get(i)))
deOB.set_text(
str.tostring(
txt + " (" + str.tostring(obj.dV.get(i)) + "%)")
)
deOB.set_text_size (size.auto)
deOB.set_text_halign(text.align_left)
deOB.set_text_color (use_grayscale ? color.silver : color.new(css, 0))
if ob_metrics_show and barstate.isconfirmed
if obj.wM.size() > 0
for i = 0 to obj.avg.size() - 1
switch obj.dir.get(i)
1 =>
switch obj.wM.get(i)
1 => obj.blVP.set(i, obj.blVP.get(i) + 1), obj.wM.set(i, 2)
2 => obj.blVP.set(i, obj.blVP.get(i) + 1), obj.wM.set(i, 3)
3 => obj.brVP.set(i, obj.brVP.get(i) + 1), obj.wM.set(i, 1)
-1 =>
switch obj.wM.get(i)
1 => obj.brVP.set(i, obj.brVP.get(i) + 1), obj.wM.set(i, 2)
2 => obj.brVP.set(i, obj.brVP.get(i) + 1), obj.wM.set(i, 3)
3 => obj.blVP.set(i, obj.blVP.get(i) + 1), obj.wM.set(i, 1)
var hN = array.new(1, b.n)
var lN = array.new(1, b.n)
var hS = array.new(1, b.n)
var lS = array.new(1, b.n)
if iH
hN.pop()
hN.unshift(int(b.n ))
if iL
lN.pop()
lN.unshift(int(b.n ))
if sH
hS.pop()
hS.unshift(int(b.n ))
if sL
lS.pop()
lS.unshift(int(b.n ))
if ob_show
bull_ob.drawVOB(true , ob_bull_css, hN.first(), false)
bear_ob.drawVOB(false, ob_bear_css, lN.first(), false)
if ob_swings
s_bull_ob.drawVOB(true , css_swing_up, hS.first(), true)
s_bear_ob.drawVOB(false, css_swing_dn, lS.first(), true)
if bull_ob
blalert.ob := true
if bear_ob
bralert.ob := true
if s_bull_ob
blalert.swingob := true
if s_bear_ob
blalert.swingob := true
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{ - End }
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{ - FVG | VI | OG }
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
//{----------------------------------------------------------------------------------------------------------------------------------------------}
ghl() => request.security(syminfo.tickerid, fvg_tf, [high , low , close , open ])
tfG() => request.security(syminfo.tickerid, fvg_tf, )
cG(bool bull) =>
= ghl()
= tfG()
var FVG draw = FVG.new(
array.new()
, array.new()
)
var FVG cords = array.new()
float pup = na
float pdn = na
bool cdn = na
int pos = 2
cc = timeframe.change(fvg_tf)
if barstate.isfirst
for i = 0 to fvg_num - 1
draw.box.unshift(box.new (na, na, na, na, border_color = color.new(color.white, 100), xloc = xloc.bar_time))
draw.ln.unshift (line.new(na, na, na, na, xloc = xloc.bar_time, width = 1, style = line.style_solid))
switch what_fvg
"FVG" =>
pup := bull ? gl : l
pdn := bull ? h : gh
cdn := bull ? gl > h and cc : gh < l and cc
pos := 2
"VI" =>
pup := bull
? (gc > go
? go
: gc)
: (gc > go
? go
: gc )
pdn := bull
? (gc > go
? gc
: go )
: (gc > go
? gc
: go)
cdn := bull
? go > gc and gh > gl and gc > gc and go > go and gh < math.min(gc, go) and cc
: go < gc and gl < gh and gc < gc and go < go and gl > math.max(gc, go) and cc
pos := 1
"OG" =>
pup := bull ? b.l : gl
pdn := bull ? gh : gh
cdn := bull ? gl > gh and cc : gh < gl and cc
pos := 1
if not na(cdn ) and cdn
cords.unshift(
FVG.new(
na
, na
, bull
? true
