XAUUSD 15m - Clean Signals (Anti-Spam v3)This **XAUUSD 15m – Clean Signals (Anti-Spam v3)** is a trend-aligned signal indicator built around an **EMA basis + ATR channel**. It aims to produce **fewer but cleaner** long/short prompts. A 7-EMA acts as the basis line, ATR forms inner/outer bands, and a 50-EMA provides a trend filter. By default, it uses **ADX strength filtering** plus a **confirmation candle** rule to avoid choppy conditions and weak breakouts. Signals come in three types: **DR (pullback → reversal back above/below the basis)**, **MR (pierce the inner band then reclaim it)**, and **BO (inner-band breakout, off by default due to over-triggering)**. To control frequency, it adds a **cooldown (minimum bars between signals)** and a strict **arming/reset de-duplication**: after a same-direction signal fires, it won’t fire again until price “resets” by touching the inner band or the basis (user-selectable). A “room to outer band” filter helps prevent chasing near extremes. Overall, it’s designed for disciplined 15-minute momentum-pullback entries, especially during liquid sessions like London.
Indicators and strategies
MA Zone Candle Color 8.0This indicator plots a selected moving average (any type: EMA, VWAP, HMA, ALMA, custom composites, RVWAP, etc.) and creates a symmetrical grid of horizontal levels/bands spaced at precise, predefined increments around it. The spacing between levels can be set in two modes:
Percent (%) of the current MA value
Points (fixed price units)
The available increment sizes follow a specific geometric-like sequence (very similar to Gann square-of-9 derived steps), giving you clean, repeatable distance choices such as 0.61, 1.22, 2.44, 4.88, 9.77 points (or their percentage equivalents).
Core purpose
It visually marks exactly how far price has moved away from your chosen moving average — in multiples of the increment you selected.
Main practical use cases -
1. Measuring distance from key reference level
VWAP or EMA(20–89), Points mode, 1.22–4.88 incr.
"Price is currently 3.5 increments above VWAP" → quick context for context
2. Identifying structured price levels
Points mode + 2.44 or 4.88 increment
Treat every band as potential support/resistance or target zone
3. Comparing extension size across instruments
Percent mode, same increment value across symbols
Makes extensions visually comparable (BTC vs ETH vs SPX vs NQ)
4. Session / intraday structure mapping
RVWAP or session VWAP + Points mode
See how many "steps" price has made since session open / reset
5. Setting objective take-profit / scale-out levels
Any MA + medium increment (4.88–19.53 points)
"I'll take partials at +2×, +4×, +6× increment" — very mechanical
6. Volatility-adjusted grid (crypto/forex)
Points mode with larger increments
Prevents bands from becoming too wide/narrow during huge volatility swings
Most common combo
MA: VWAP or RVWAP (session/day reset)
Mode: Points
Increment: 1.220704 or 2.441408 or 4.8828125
Bands per side: 30–60
→ Creates a clean, evenly-spaced ladder of levels around the daily/intraday average that traders can use purely for distance measurement and objective level marking.
In short:
It's a very precise, repeatable distance ruler built around any moving average you choose — nothing more, nothing less.
Rolling DrawdownRolling Drawdown, trying to make an auto updating drawdown screener and scanner, work in progress, edit in future.
Sector Momentum Dashboard (3-1M / 6-1M / 12-1M, Compact)This indicator provides a compact sector‑momentum dashboard designed for ETF rotation and relative strength analysis. It calculates true daily momentum using three institutional lookback windows (3‑1M, 6‑1M, 12‑1M), allowing traders to evaluate short‑term, medium‑term, and long‑term sector leadership. The table ranks major US sector ETFs by momentum, highlights the strongest and weakest performers, and updates dynamically regardless of the chart timeframe. This tool is intended for traders who want a clear, efficient view of sector rotation trends to support tactical allocation, momentum strategies, and market‑strength assessment.
Levels by EVThis indicator plots a clean set of commonly used reference levels on the chart, including the prior day high and low (PDH/PDL), the current day open (DO), prior week high and low (PWH/PWL), prior month high and low (PMH/PML).
Daily, weekly, and monthly levels are sourced from their respective higher timeframes to keep the values stable and consistent across intraday charts. Session ranges are calculated using a selectable timezone and are updated in a controlled way to avoid unnecessary object creation and chart clutter. An optional setting allows developing session highs and lows to update while the session is active, or you can keep session levels fixed once the session ends.
Use these levels as context for liquidity, support/resistance, and session structure. Labels can be enabled or disabled, and can optionally be kept on the right edge so the chart remains readable on any zoom level.
Multi Asset & Multi Timeframe Trend DashboardOverview
The Multi-Asset & Multi-Timeframe Trend Dashboard is a comprehensive visual data terminal designed to provide a bird's-eye view of market sentiment across five different assets and seven distinct timeframes simultaneously. By consolidating 10 core technical indicators into a single table, it eliminates the need for "chart hopping" and helps traders identify high-probability trend alignment.
How It Works
The dashboard evaluates each asset based on a Scoring System ($-10$ to $+10$). For every timeframe, the script analyzes the following 10 conditions:
Trend: EMA 20 > EMA 50Macro
Trend: EMA 50 > EMA 200
Position: Price > EMA 200
MACD: MACD Line > Signal Line
MACD Momentum: MACD Histogram > 0
RSI Momentum: RSI(14) > RSI SMA(14)
RSI Level: RSI(14) > 50
Stochastics: Stoch K > D
CCI: Commodity Channel Index > 0
Awesome Oscillator: AO > 0
Visual Logic & Features
Indicator Dots (■): Represent the 10 individual technical conditions. Green indicates a bullish state; Red indicates a bearish state.
Trend Arrows (▲/▼): Displays the aggregate directional bias of a timeframe based on the sum of the 10 dots.
Neutral State (✖): If indicators are split 50/50 (Score of 0), a grey cross is displayed to indicate total market indecision.
"ALL" Column: A macro-summary that aggregates scores across all four primary timeframes.
Volatility Marker (•): A dot appearing next to the symbol name indicates that current ATR is higher than the historical average (user-defined threshold).
Market Status Color: The symbol name background turns Green if the market is currently open and active, and Red if it is closed or stagnant.
Technical Implementation
This script utilizes request.security calls to fetch data across timeframes. To ensure performance and prevent repainting issues, all security calls are handled using the barstate.islast flag to only render the dashboard on the most recent bar.
How to Use
Alignment Trading: Look for "Full House" scenarios where all arrows (15m through Daily) are the same color.
Scalping Bias: Use the "Mini Timeframes" (1m, 3m, 5m) to find entries that align with the higher timeframe trend shown in the main table.
Volatility Filter: Only take trades when the volatility marker (•) is active to ensure there is enough "power" in the move.
8:00 to 8:15 ORB BOXNY 8:00–8:15 Opening Box + Midpoint (Today Only)
This indicator highlights the New York 8:00–8:15 AM (ET) opening range by automatically drawing a price box and midpoint for the current trading day only.
During the 8:00–8:15 window, the indicator tracks the highest high and lowest low. Once the window ends, it plots:
A horizontal opening range box extending to the right
A midpoint line representing the equilibrium of the range
At the start of each new New York trading day, the previous day’s box and midpoint are automatically removed, keeping the chart clean and focused on the current session.
Key Features
Fixed New York time (ET) session handling
Automatically updates every trading day
Displays range high, range low, and midpoint
Box and midpoint extend forward for intraday reference
Customizable color and transparency
Designed for intraday trading and market structure analysis
Common Use Cases
Identifying early-session balance and bias
Measuring volatility expansion after the NY open
Acting as support/resistance reference levels
Combining with ORB, liquidity, or momentum strategies
This tool is especially useful for index futures, forex, and metals, where the New York session plays a major role in daily price discovery.
If you want, I can also:
Shorten this for a TradingView publish page
Rewrite it more “technical” or more beginner‑friendly
Add a disclaimer or school‑project version
14SMA13 20/30/50 First Order AppearanceIn white, it's a buy signal, and in orange, it's a sell signal.
The signal is given when the simple moving averages 20+30+50 cross.
To confirm entry, wait for a volume candle that breaks through the 50-period simple moving average of volume, whether for buying or selling.
You set your selling targets according to your own analysis method.
Leotin ScalperThis is a quick scalping indicator. Mostly used on the 1 minute timeframe. It uses the RSI on the 14 period with 30 and 70. When it crosses the 70 line it and a hanging man or shooting star candle forms, it will give a sell indication. when crossing the 30 line and a hammer or inverted hammer is formed it will give a buy indication.
Session Levels by EV EV Session Levels highlights the most important price levels of the main trading sessions in a clear and non-repainting way.
The indicator identifies the High, Low, and 50% equilibrium level of the Asian, London, and New York sessions, helping traders understand where price has previously found balance or liquidity.
Each session is visualized with a subtle range box showing the full price movement during that session.
Session Highs and Lows are extended into future sessions and automatically stop extending once price touches them, keeping the chart clean and relevant.
Only the most recent sessions are displayed to avoid clutter, making this tool especially useful for learning session structure, intraday context, and level interaction without overwhelming the chart.
Keltner-Aroon-EFI FlowKeltner-Aroon-EFI Flow - |K| |A| |E| |F|
KAE Flow is a quantitative trend-aggregation engine designed to determine the dominant market bias by fusing three distinct market dimensions: Volatility, Trend Strength, and Volume.
This script does not rely on a single metric. Instead, it creates a composite "Flow" score derived from the Daily timeframe to act as a high-level bias filter for intraday or swing trading.
1. The Quantitative Logic (The Engine)
The core of this indicator is the KAE Engine, which polls data from the Daily timeframe (by default) to ensure you are always trading in alignment with the macro trend. It aggregates three logical components:
K (Keltner Channels): Measures Volatility Breakouts.
Logic: Returns bullish if price closes above the Upper Channel, bearish if below the Lower Channel. This captures the expansion phase of price action.
A (Aroon): Measures Trend Age & Strength.
Logic: Returns bullish only if the Aroon Up is > 70 and dominating the Aroon Down. This ensures the trend is not just present, but mathematically strong.
E (Elder’s Force Index): Measures Volume-Weighted Momentum.
Logic: Uses volume pressure to confirm price moves. Positive smoothed force indicates bullish accumulation.
2. Signal Processing (ALMA)
Raw data is noisy. The KAE Flow takes the aggregated raw score from the components above and runs it through an ALMA (Arnaud Legoux Moving Average).
Why ALMA? It offers the best balance between smoothness and responsiveness, removing "false flips" in the trend bias while reacting quickly to genuine reversals.
The Color (The Bias):
Deep Blue: Strong Bullish Flow (KAE Score > 0.1). Look for Long entries .
White: Strong Bearish Flow (KAE Score < -0.1). Look for Short entries.
Gray: Neutral/Transition. Volatility is contracting or the trend is conflicting.
5. Settings & Configuration
Keltner/Aroon/EFI Lengths: Fully customizable to fit different asset classes (Crypto vs. Forex).
Active Smoothing: Toggle ALMA on/off.
Active Components: You can toggle specific engines (K, A, or E) on or off. Default uses Keltner + Aroon for a pure Price/Time analysis.
Risk Warning: This indicator pulls higher-timeframe data (Daily) to color lower-timeframes. While this provides a powerful macro view, be aware that closed candle data is used to prevent repainting issues in real-time.
D_Quant --- Trade With Discipline
ICT/SMC HUDOverview
This indicator is an ICT/SMC-inspired market structure tool that detects:
Swing Structure (pivot-based)
BOS (Break of Structure) and CHoCH (Change of Character)
Liquidity Sweeps (buy-side & sell-side)
Premium/Discount filter using a simple equilibrium (EQ) midpoint
A Hold Score (0–5) system calculated from a higher timeframe (HTF)
Optional TP/SL visualization box (with TP2 expansion when Hold Score is strong)
⚠️ This is an educational tool, not a guaranteed trading system.
Core Logic (Where signals come from)
This script builds a simplified ICT/SMC framework using 3 layers:
1) Market Structure via Swings (Pivot High/Low)
The script finds swing highs/lows using:
ta.pivothigh(high, swingLen, swingLen)
ta.pivotlow(low, swingLen, swingLen)
These swings become the reference points for structure breaks.
2) BOS / CHoCH Detection
BOS Up = price closes above the last swing high
BOS Down = price closes below the last swing low
trend updates to 1 (bullish) or -1 (bearish) based on BOS
CHoCH triggers when BOS occurs against the current trend
CHoCH Up = trend was bearish, then BOS Up happens
CHoCH Down = trend was bullish, then BOS Down happens
3) Liquidity Sweep + Premium/Discount Filter
Sell-side sweep: low breaks below last swing low, but closes back above it
Buy-side sweep: high breaks above last swing high, but closes back below it
Equilibrium (EQ) midpoint is:
(lastSwingHigh + lastSwingLow) / 2
Discount = price below EQ
Premium = price above EQ
Signal Rules (Buy / Sell)
Buy Signal
Sell-side sweep + (CHoCH Up or BOS Up)
OR
BOS Up while price is in Discount
Sell Signal
Buy-side sweep + (CHoCH Down or BOS Down)
OR
BOS Down while price is in Premium
Hold Score System (0–5) — HTF confirmation
The script calculates a Hold Score from HTF using 5 checks:
HTF EMA Bias
Bullish hold bias: EMA Fast > EMA Mid
Bearish hold bias: EMA Fast < EMA Mid
Volatility Expansion
Uses HTF Bollinger Band width; if width is increasing, expansion is “OK”
Mid Acceptance
HTF close relative to HTF BB basis (SMA)
Follow-through after Entry
Requires N consecutive bars closing in favor of the entry direction
No Opposite Break
Avoid holding if opposite BOS/CHoCH appears
Hold Score = sum of the 5 checks (0–5)
TP/SL Box (Optional)
When a new Buy/Sell signal occurs:
Entry is set at current close
SL uses:
Swing-based stop (lowest/ highest of last N bars)
optional ATR buffer
TP1 and TP2 are set using Risk:Reward ratios
TP2 Expansion (Optional)
If Hold Score ≥ threshold:
TP2 RR increases by extraRRonHold
Can be set to expand only (never shrink)
Auto-hide TP/SL Drawings (Optional)
If enabled, the TP/SL box/lines/labels will automatically disappear after N bars.
This is useful for clean charts while still keeping Hold Score logic running.
Best Use Cases
✅ Works best during liquidity sessions:
London Killzone
New York Killzone
✅ Recommended timeframes:
Structure: 15m / 1h
Entry refinement: 5m / 1m
Hold Score HTF: 1h or 4h
Inputs Guide (Quick)
Swing length (Structure): controls swing sensitivity (higher = fewer swings)
Hold Score HTF: HTF used for Hold Score confirmation
TP/SL Box: visualization tool, not order execution
Auto-hide: removes drawings after N bars for clean charts
TP2 Expand: increases TP2 target when Hold Score is strong
Disclaimer
This indicator does not place trades and does not guarantee profits. Always manage risk, backtest, and validate with your own strategy.
Options Confluence Overlay - Stocks (1D) The Options Confluence Overlay — Stocks is a daily timeframe indicator designed for equities and ETFs, with a focus on timing, structure, and risk clarity rather than frequent signals.
This tool combines price structure, volatility, and momentum timing into a single visual framework that helps traders decide when to trade, when to stand aside, and where risk and exits are clearly defined.
Unlike fast-signal indicators, this script emphasizes trade quality over trade quantity.
🔍 What the indicator does
The indicator evaluates four core components on the daily chart, with an optional weekly trend filter:
• Mean + Deviation Band (Band 1) to define structure
• ATR-based targets to project realistic price expansion
• Momentum timing using Stochastic RSI (cross or approach)
• Confluence scoring to allow or block trades
Only when these elements align does the indicator permit a CALL, PUT, or display NO-TRADE.
🟩 Preferred Entry Zone (PEZ)
When a CALL or PUT is allowed, the indicator highlights a Preferred Entry Zone (PEZ):
• CALL PEZ: Mean → Lower Band
• PUT PEZ: Mean → Upper Band
This zone represents areas where risk is better defined and entries are typically more favorable.
🎯 Primary Exit (Partial ATR)
Instead of encouraging traders to chase full volatility expansion, the indicator includes a Primary Exit level:
• A configurable percentage of ATR
• Designed to capture early, high-probability movement
• Especially useful for shorter-term trades or profit protection
Full ATR targets are still shown, but the Primary Exit is intended as the first decision point, not a promise of full extension.
🧠 Entry Quality (Informational)
When enabled, the dashboard displays an Entry Quality hint:
• PEZ Deep — price is deeper into the zone (higher potential, higher patience required)
• PEZ Shallow — price is closer to the mean (faster, but less extended setups)
This is informational only and does not block trades.
🚦 Trade states
The dashboard clearly communicates one of three states:
• CALL allowed
• PUT allowed
• NO-TRADE (conditions are mixed or incomplete)
The indicator is intentionally conservative during NO-TRADE periods.
⚠️ Important notes
• Designed for stocks and ETFs, not crypto
• Intended for daily timeframe analysis
• Not financial advice
• Always combine with proper risk management
📘 Model Trade Example (CALL)
The dashboard shows CALL allowed
Price pulls back into the green PEZ
Weekly filter confirms bullish direction
Enter near the PEZ (no chasing breakouts)
Risk: below Band 1 low
Primary Exit: at the yellow Primary Exit level
Optional: hold partial size toward full ATR target if momentum remains strong
If the dashboard changes to NO-TRADE, no new entries are taken.
📕 Model Trade Example (PUT)
The dashboard shows PUT allowed
Price rallies into the red PEZ
Weekly filter confirms bearish direction
Enter near resistance inside PEZ
Risk: above Band 1 high
Primary Exit: at the yellow Primary Exit level
Avoid holding through momentum exhaustion
PK VEDIC LEVELS📐 VEDIC LEVELS – PRICE & TIME STRUCTURE INDICATOR
VEDIC Levels is a technical analysis indicator based on INDIAN RISHIS price geometry, designed to identify key support, resistance, balance, and reaction levels in the market.
This indicator helps traders understand where price is likely to react, pause, reverse, or accelerate.
🔹 Key Features
Automatically plots VEDIC -based price levels
Identifies major support & resistance zones
Helps spot reversal areas and breakout zones
Useful for swing, and positional trading
Works on stocks, indices, crypto, and forex
Compatible with all timeframes
🔹 How to Use
Price near lower VEDIC levels → Potential support / buying interest (DOJI CANDLE IN 15MIN)
Price near upper VEDIC levels → Potential resistance / selling pressure (DOJI CANDLE IN 15MIN)
Strong breakout above a level → Trend continuation
Rejection from a level → Possible reversal or pullback
Best used along with:
🔹 Volume / CVD
🔹 Price action
Trading Style
✔ Trend Confirmation
✔ Reversal Identification
Sanjay SwingsSanjay Swings is Pullback Tool, Which is useful for Swings Marking.
This indicator Can helpful in ICT concept for Trade Confirmation
Market Structure Break + RSI ExitSignal Architect™ — Developer Note
This indicator includes a limited visual preview of a proprietary power signal I have personally developed and refined across futures, algorithmic systems, options, and equity trading.
Every tool I release is built with one principle in mind:
clarity of direction without over-promising or under-delivering.
That is why all Signal Architect™ tools emphasize:
Market structure first
High-probability directional context
Clear, visual risk framing
No predictive claims, no curve-fit illusions
What you are seeing here is only a small glimpse of a much broader internal framework I actively use in live environments.
🧠 Background & Scope
Over the years, I have personally developed 800+ programs spanning:
Equities
Futures
Options
Dividend & income systems
Portfolio construction and allocation logic
This includes 40+ Nasdaq-100 trading bots, several of which operate under extremely strict rule-sets and controlled deployment conditions.
Nothing shared publicly represents my full system—only educational and analytical previews designed to demonstrate how structure and probability can be aligned visually.
🤝 Support & Collaboration
If you find value in what I share:
Please subscribe, boost, and share my scripts, Ideas, and MINDS posts
You are always welcome to message me directly with questions or if you need something built or adapted
Constructive feedback and collaboration are encouraged
For traders looking to go deeper, I offer optional memberships that include:
Access to additional signals
Early previews
Occasional free tools and upgrades to support your trading journey
🔗 Membership & Signals:
trianchor.gumroad.com
⚠️ Final Note
Everything published publicly is for educational and analytical purposes only.
Markets carry risk. Discipline and risk management always come first.
— Signal Architect™
You can Find my personally developed GBT below
chatgpt.com
chatgpt.com
chatgpt.com
********************************************************************************************************************WHAT THIS INDICATOR DOES
This indicator is a structure-first breakout engine designed around how price actually transitions between balance and expansion.
It does not predict reversals.
It waits for confirmed market structure breaks, then:
Anchors risk using recent wave extremes
Projects deterministic TP/SL zones
Tracks outcomes visually and statistically
Optionally exits early when momentum exhausts (RSI fade)
This makes it ideal for:
Directional traders
Swing continuation setups
Expansion phases after compression
🧠 CORE SIGNAL ARCHITECT LOGIC
1️⃣ Market Structure Identification
The system uses pivot highs and pivot lows to define true structural levels:
Pivot High break → Long bias
Pivot Low break → Short bias
This avoids:
Random candle breakouts
Intrabar noise
False momentum spikes
Only confirmed structural levels are traded.
2️⃣ Entry Trigger (Structure Break)
A trade is triggered only when price closes through structure:
Direction Requirement
Long Close breaks above last confirmed pivot high
Short Close breaks below last confirmed pivot low
📌 Important:
No signal fires if you are already in a trade — one position at a time, clean sequencing.
3️⃣ Stop-Loss Logic (Wave-Anchored Risk)
Stops are not arbitrary.
They are anchored to:
Recent wave low (for longs)
Recent wave high (for shorts)
This ensures:
Stops sit beyond real market structure
Risk reflects actual auction failure, not candle noise
4️⃣ Take-Profit Logic (Risk × Reward)
Take-profit is mechanically derived:
TP = Risk × Risk:Reward Ratio
Examples:
RR = 1.0 → TP = same distance as SL
RR = 1.5 → TP = 1.5× SL distance
RR = 2.0 → TP = expansion-focused swings
This keeps results comparable, repeatable, and testable.
5️⃣ Optional RSI Exit (Momentum Fade)
RSI is not used for entries.
It is used only as an optional early-exit filter:
Trade RSI Condition
Long RSI crosses down from Overbought
Short RSI crosses up from Oversold
This is designed for:
Reducing give-back during exhaustion
Tight markets where expansion stalls
Volatility contraction environments
🔕 You can disable this entirely for pure structure trading.
📦 VISUAL OUTPUTS
🔲 Risk Boxes (Core Feature)
Every trade plots:
Green box = profit zone
Red box = loss zone
Boxes:
Extend forward bar-by-bar
Stop updating once trade resolves
Allow instant visual expectancy review
🔺 Signal Arrows
Green ▲ = Structure Break Long
Red ▼ = Structure Break Short
No repainting.
No intrabar guessing.
🧮 Performance Stats Table
Tracks:
Total trades
Wins
Losses
Win rate %
📌 This is contextual feedback, not a promise of future results.
🎯 RECOMMENDED TIMEFRAMES (VERY IMPORTANT)
This indicator performs best when structure matters.
⭐ PRIMARY TIMEFRAMES (Recommended)
Timeframe Use Case
15-Minute Intraday structure breaks, clean expansions
30-Minute Session-level continuation
1-Hour Swing structure, reduced noise
2-Hour Institutional rhythm, fewer false breaks
4-Hour Macro structure legs
✔ These timeframes allow pivots to form properly
✔ Stops remain structurally meaningful
✔ RR math stays realistic
⚠️ SECONDARY / CONDITIONAL
Timeframe Notes
5-Minute Use only during trend days
Daily Works well, but slower signal frequency
🚫 NOT RECOMMENDED
Timeframe Why
1–3 Minute Too much pivot distortion
Tick / Seconds Breaks structure logic entirely
This is not a scalping indicator.
🟩 BACKGROUND BIAS SHADING
Green tint → Active long bias
Red tint → Active short bias
No tint → Neutral / flat
This helps:
Avoid over-trading
Stay aligned with active structure
Recognize when the system is waiting
🧠 HOW TO USE THIS CORRECTLY
Best Practices
✔ Trade only in expansion environments
✔ Let pivots form before expecting signals
✔ Respect the stop — it is structurally valid
✔ Journal results per timeframe
Avoid
✘ Forcing trades in chop
✘ Using this as a reversal indicator
✘ Lowering timeframe to “get more signals”
⚠️ IMPORTANT DISCLAIMER
This indicator is for educational and analytical purposes only.
It does not:
Predict markets
Guarantee profits
Replace risk management
Trading involves substantial risk and can result in loss of capital.
Past performance does not guarantee future results.
MINI Lead Osc v2_ CCI_ Impulse_ REG🔹 MINI Lead Osc v2 — Momentum, Impulse & Early Reversal Tool
MINI Lead Osc v2 is a leading momentum oscillator designed to detect early shifts in market strength, impulse exhaustion, and potential reversals before they become obvious on price.
This indicator is part of the ICT Suite ecosystem and is engineered to work in confluence with:
Regression SuperTrend (WAIT)
Liquidity Oscillator (Structure & Bias)
Used together, they form a complete top-down trading framework.
⚙️ Core Logic
MINI Lead Osc v2 blends multiple engines into a single clean signal:
• CCI + RSI slope momentum
• ATR volatility shift
• Pivot-based divergence detection
• Adaptive Sensitivity+ engine
• Regression channel (linreg + RMSE bands)
The output is a normalized lead line that reacts before classic lagging indicators.
🚀 What This Indicator Is Best For
✔ Early trend continuation signals
✔ Detecting impulse starts, weakness, and distribution
✔ Filtering noise during ranges
✔ Momentum confirmation for pullback entries
✔ Spotting divergence without repainting
This is not a standalone “buy/sell spam” indicator — it is a decision-quality tool.
🔁 How to Use (Recommended Setup)
For best results, use MINI Lead Osc v2 together with:
1️⃣ Regression SuperTrend (WAIT)
→ Defines dominant trend & market regime
→ Filters counter-trend signals
2️⃣ Liquidity Oscillator (Structure)
→ Confirms break → pullback → continuation logic
→ Adds HTF bias & session context
3️⃣ MINI Lead Osc v2 (this script)
→ Times entries
→ Detects early momentum shifts
→ Confirms impulse quality
📌 Trade only when all three align.
🧠 Important Notes
• Signals are non-repainting (bar-close confirmed)
• Designed for discretionary trading, not automation
• Works best on 5m – 15m – 1h timeframes
• Crypto, Futures, and FX friendly
⚠️ Disclaimer
This indicator is for educational and analytical purposes only.
It does not constitute financial advice.
Always manage risk and confirm with price action.
Triple Stochastic RSI [XYZ-Trades]Triple Stochastic RSI (original work from XYZ-Trades) with some minor additions to allow user to move table.
Yetty Trades ORB Strat With Key Levels NQ RTHMust Have Confirmation of ORB on 5 and 15 Min chart. Follow Retracement.
Key Daily & HTF Levels
Track intraday, daily, weekly, and monthly H/L - RTH daily levels ignore pre-market
Current Day H/L (RTH Only)
Previous Day H/L (RTH Only)
2 Days Previous H/L
Pre-Market H/L (Separate)
Weekly H/L
Monthly H/L
NEW
Open Price Levels
Previous period opening prices - key mean reversion and magnet levels
Previous Day Open (PDO)
Previous Week Open (PWO)
Previous Month Open (PMO)
NY Open Line
London Open Line
Session Levels
Monitor Asian and London session highs, lows, and opens
Asian Session H/L
London Session H/L
NY Open Price
London Open Price
Customizable Times
15-Min Opening Range + Signals
Current day only OR box - resets daily + breakout signals with pullback & volume confirmation
Current Day Only
No Historical Clutter
ORB Midpoint Line
Breakout/Pullback Signals
Volume Confirmation
Adjustable Signal Size
NEW
VWAP + SD Bands
VWAP with Standard Deviation bands for institutional-grade analysis
Intraday VWAP
±1 SD Band (Green)
±2 SD Band (Orange)
±3 SD Band (Red)
Dynamic S/R
NEW
Pivot Points
Classic daily pivot points with support and resistance levels
Daily Pivot (P)
R1 & R2 Resistance
S1 & S2 Support
Based on Prior Day
NEW
Fair Value Gaps (FVG)
Smart Money / ICT concept - highlight price imbalances that tend to fill
Bullish FVGs (Green)
Bearish FVGs (Red)
Adjustable Lookback
Min Gap Size Filter
Moving Averages + Strategy
EMAs with built-in Double EMA Pullback buy/sell signal strategy
9 EMA
21 EMA
200 EMA
EMA Pullback Signals
HTF EMA Filter
NEW
200 EMA Bounce Signals
Detect when price uses 200 EMA as dynamic support or resistance
Support Bounce (Green)
Resistance Bounce (Red)
Touch Distance Filter
Confirmation Bars
NEW
Signal Filters
Filter signals by higher timeframe trend and high-volume trading hours
HTF EMA Trend Filter
Time-Based Filter
Power Hour 1 (9:30-11:30)
Power Hour 2 (2:00-4:00)
NEW
ATR-Based Stop Levels
Automatic stop loss suggestions based on ATR when signals fire
14-Period ATR
1.5x ATR Multiplier
Visual Stop Markers
Risk Management
NEW
Statistics Table
On-chart performance dashboard with customizable metrics
Win Rate Display
Total Signal Count
Buy/Sell Breakdown
Position Options
Reversal Patterns
Automatically detect bullish and bearish hammer candlestick patterns
Bullish Hammers
Bearish Hammers
Visual Labels
Fully Customizable - All New Features OFF by Default
Every level has individual controls. New features are disabled by default to keep your chart clean - enable what you need!
Toggle Any Level On/Off
Line Style Per Level
Line Width Per Level
4 Label Display Types
Custom Colors
Solid / Dashed / Dotted
VWAP Band Multipliers
FVG Size Filters
ATR Multiplier
Stats Display Options
HTF Timeframe Choice
Power Hour Times
Trading Strategy Guide
How to use this indicator for breakout trading with pullback entries
Phase 1
Identify Setup
Look for price consolidating near key levels (previous day H/L, session H/L)
Check if price is respecting EMAs (9, 21, or 200)
Note the opening range box boundaries
Watch for price approaching VWAP
Phase 2
Wait for Breakout
Wait for price to break above/below opening range
Look for breakout beyond session highs/lows
Confirm with volume and momentum
Watch for bullish/bearish hammer patterns at key levels
Phase 3
Enter on Pullback
After breakout, wait for price to pull back to EMAs
Look for price to retest the opening range boundary
Enter when price finds support/resistance at key levels
Use hammer patterns as entry confirmation signals
Grizzology-Style Clean Layout
• Daily Reset: All levels automatically reset each day - no historical clutter
• Current Day Only: Opening Range box only shows for today's session
• Clean Lines: Levels use lines instead of extending plots for cleaner charts
• Labels: CDH, CDL, PDH, PDL, PMH, PML labels for easy identification
• Pre-Market: Track pre-market high/low levels (04:00-09:30)
Trading Tips
• Risk Management: Always use stop losses below/above key levels
• Confirmation: Wait for multiple indicators to align before entering
• Time of Day: Breakouts during London/New York open tend to be more reliable
• Volume: Higher volume on breakouts increases probability of success
• False Breakouts: Opening range helps filter out early false moves
Example Trade Setup
1. Market Opens: Opening range box forms in first 15 minutes (9:30-9:45 AM)
2. Consolidation: Price trades within the OR box, respecting boundaries
3. Breakout: Price breaks above OR high with strong momentum, confirmed by volume
4. Pullback: Price pulls back to test the OR high (now support) and 21 EMA
5. Entry: Bullish hammer forms at the pullback level → Enter long
6. Target: Previous day high or session high
7. Stop Loss: Below the pullback low or below OR box
Heikin Ashi SMA 9 / 20 / 50 (MTF + Selectable Source)This is simple Heikin ashi value three moving average as 9 / 20 / 50 for clear trend identification . use it wisely with other confirmation .
