Get started

Pine utilities

Dual MTF Confirmed Trend Strategy (5m Entry / 15m MACD & RSI) v1That is a detailed Dual Multi-Timeframe (MTF) Confirmed Trend Strategy written in Pine Script for TradingView. The core idea of this strategy is to only take entry signals on a faster timeframe (5-minute) when the trend is strongly confirmed on a slower, higher timeframe (15-minute). This aims to reduce false signals and trade in the direction of the dominant trend. Here is an explanation of how the strategy works, broken down by section: 1. 5-Minute Entry Filters 🚀This section calculates several indicators on the current 5-minute chart to identify potential trade setups. A position is only considered if all 5-minute conditions align. Supertrend: A trend-following indicator based on Average True Range (ATR). Long Condition: The closing price must be above the Supertrend line. Short Condition: The closing price must be below the Supertrend line. Gann Hi-Lo (GHL): A trend indicator using Simple Moving Averages (SMA) of the high and low prices. GHL Line: Switches between the SMA of the Highs and the SMA of the Lows based on price action. Long Condition: The closing price must be above the GHL line. Short Condition: The closing price must be below the GHL line. Exponential Moving Averages (EMAs): It uses a 50-period EMA and a 100-period EMA to confirm the short-term trend direction. Long Condition: The closing price must be above both the 50 EMA and the 100 EMA. Short Condition: The closing price must be below both the 50 EMA and the 100 EMA. 2. 15-Minute MTF Confirmation Filters ⏳This is the crucial step where the strategy verifies the trend on the slower, 15-minute timeframe using the request security function. This step acts as a gatekeeper to ensure the 5-minute trade aligns with the larger trend. MACD Histogram (12, 26, 9): The difference between the MACD Line and the Signal Line. Long Confirmation: The 15m MACD Histogram must be greater than 0 (MACD line is above the Signal line, indicating bullish momentum). Short Confirmation: The 15m MACD Histogram must be less than 0 (MACD line is below the Signal line, indicating bearish momentum). RSI (Relative Strength Index) (14): A momentum oscillator. The 50 level is often used to determine the general market trend. Long Confirmation: The 15m RSI must be greater than 50 (indicating stronger bullish momentum). Short Confirmation: The 15m RSI must be less than 50 (indicating stronger bearish momentum). The Total 15m Confirmation is only true if both the MACD and the RSI confirmation signals align. 3. Trade Orders (Entry Logic) ⚖️ The strategy only executes a trade when the 5-minute entry conditions are met AND the 15-minute confirmation conditions are met. Final Long Condition: 5m Conditions (Supertrend, GHL, EMA alignment) AND 15m Confirmation (MACD Hist > 0 AND RSI > 50) Final Short Condition: 5m Conditions (Supertrend, GHL, EMA alignment) AND 15m Confirmation (MACD Hist < 0 AND RSI < 50) When a trade signal is generated, the strategy: Closes any opposite position (e.g., closes a "Short" trade if a "Long" signal appears). Enters the new position (e.g., enters a "Long" trade). This is designed as a reversal strategy where a new entry automatically closes the previous opposing trade. In Summary The strategy operates on a principle of Trend Alignment: 5-Minute Chart: Is used for Signal Timing (when exactly to enter the market). 15-Minute Chart: Is used for Trend Validation (is the overall market momentum supporting the signal?). It's an attempt to capture short-term moves (5m signals) that are backed by strong medium-term momentum (15m confirmation), thereby aiming for higher probability trades. This is not investment advice; it is recommended to perform optimization and backtesting for the assets intended for implementation.
Pine Script® strategy
by mhakany
EMA Cross Strategy v5 (30 lots) (15 min candle only)- safe flip🚀 EMA Cross Strategy v5 (30 Lots) (15 min candle only)— Safe Flip Edition Fully Automated | Fast | Reliable | Battle-tested Welcome to a clean, powerful, and automation-friendly EMA crossover system. This strategy is built for traders who want consistent trend-based entries without the risk of unwanted pyramiding or doubled positions. 🔥 How It Works This strategy uses a fast EMA (10) crossing a slow EMA (20) to detect trend shifts: Bullish Crossover → LONG (30 lots) Bearish Crossover → SHORT (30 lots) Every opposite signal safely flips the position by first closing the current trade, then opening a fresh position of exactly 30 lots. No doubling. No runaway position size. No surprises. Just clean, mechanical trend-following. 📈 Why This Strategy Stands Out Unlike basic EMA crossbots, this version: ✔ Prevents unintended pyramiding ✔ Never over-allocates capital ✔ Works perfectly with webhook-based automation ✔ Produces stable, systematic entries ✔ Executes directional flips with precision 🔍 Backtest Highlights (1-Year) (Backtests will vary by instrument/timeframe) 1,500+ trades executed Profit factor above 1.27 Strong trend performance Balanced long/short behavior No margin calls Consistent trade execution This strategy thrives in trending markets and maintains strict discipline even in choppy conditions. ⚙️ Automation Ready Designed for automated execution via webhook and API setups on supported platforms. Just connect, run, and let the bot follow the rules without hesitation. No emotions. No overtrading. No fear or greed. Pure logic.
Pine Script® strategy
by kulkarniabhishek38
1
BTC EMA 5-9 Flip Strategy AutobotThis strategy is designed for fast and accurate trend-following trades on Bitcoin. It uses a crossover between EMA 5 and EMA 9 to detect instant trend reversals and automatically flips between Long and Short positions. How the strategy works EMA 5 crossing above EMA 9 → Long EMA 5 crossing below EMA 9 → Short Automatically closes the opposite trade during a flip Executes trades only on candle close Prevents double entries with internal position-state logic Fully compatible with automated trading via webhooks (Delta Exchange) Why this strategy works EMA 5–9 is extremely responsive for BTC’s volatility Captures trend reversals early Works best on 15-minute timeframe Clean, simple logic without over-filtering reduces missed opportunities Performs well in both uptrends and downtrends Automation Ready This strategy includes alert conditions and webhook-ready JSON for automated execution. This is a fast-reacting BTC bot designed for intraday and swing crypto trend trading.
Pine Script® strategy
by kulkarniabhishek38
2
FX Swing — Compact Auto-Sizing (Fixed)A compact Forex swing-trading strategy that combines higher-timeframe EMA trend bias, EMA pullback confirmation, and RSI momentum filtering. It automatically sizes positions using either risk-percentage or fixed-risk, adapts pip values for JPY and non-JPY pairs, and generates clear SL/TP levels with partial take-profit exits. The script also sends structured JSON alerts for webhooks or WhatsApp automation, making it ideal for fast, disciplined, and risk-controlled swing entries.
Pine Script® strategy
by Shrihari78
1
TMB Invest - Smart Money Concept StrategyEnglish: **Quick Overview** The "TMB_SMC_Strategy_v1.1.3" combines a classic trend filter using two EMAs with contrarian RSI entries and simple SMC elements (Fair Value Gaps & Order Blocks). Stop-loss and take-profit orders are volatility-adaptive and controlled via the ATR. An integrated dashboard displays the setup status, stop-loss/take-profit levels, entry reference, and trend, RSI, and ATR values. --- ## Operating Principle 1. **Trend Filter:** A fast EMA (default 50) is compared to a slow EMA (default 200). Trading occurs only in the direction of the trend: long in uptrends, short in downtrends. 2. **Timing via RSI:** Contrarian entries within the trend. Go long when the RSI is below a buy level (default 40); Short when the RSI is above a sell level (standard 60). 3. **Structure Check (SMC Proxy):** An "FVG Touch" serves as additional confirmation that an inefficient price zone has been tested. Order blocks are visualized for guidance but are not a direct entry trigger. 4. **Risk Management via ATR:** Stop-loss and take-profit levels are set as multipliers of the current ATR (e.g., SL = 1×ATR, TP = 2×ATR). This allows target and risk distances to adjust to market volatility. 5. **Simple Position Logic:** Only one position is held at a time (no pyramiding). After entry, stop and limit orders (bracket exit) are automatically placed. --- ## Input Values * **EMA Fast / EMA Slow:** Lengths of the moving averages for the trend filter. * **RSI Length / Levels:** Length of the RSI as well as buy and sell thresholds (contra signals within the trend direction). * **Take Profit (RR) / Stop Loss (RR):** ATR multipliers for TP and SL. * **Show FVGs & Order Blocks:** Toggles the visual SMC elements (zones/boxes) on or off. -- ## Signals & Execution * **Long Setup:** Uptrend (fast EMA above slow EMA) **and** RSI below the buy level **and** a current FVG signal in a bullish direction. * **Short Setup:** Downtrend (fast EMA below slow EMA) **and** RSI above the sell level **and** a current FVG touch in a bearish direction. * **Entry & Exit:** If the setup is met, the market is entered; stop-loss/take-profit orders are placed immediately according to ATR multiples. -- ## Visualization * **EMAs:** The fast and slow EMAs are plotted to illustrate the trend. * **FVGs:** Fair Value Gaps are drawn as semi-transparent boxes in the trend color and projected slightly into the future. * **Order Blocks:** Potential order block zones from the previous candle are visually highlighted (for informational purposes only). --- ## Integrated Dashboard A compact table dashboard (bottom left) displays: * Current **Setup Status** (Long/Short active, Long/Short ready, No Setup), * **Stop-Loss**, **Take-Profit**, and **Entry Reference**, * **Trend Status** (Bull/Bear/Sideways), * **RSI Value**, and **ATR Value**. Active long/short positions are highlighted in color (green/red). -- ## Practical Guide 1. **Place on Chart** and select the desired timeframe. 2. **Calibrate Parameters** (EMA lengths, RSI levels, ATR multipliers) to match the market and timeframe. 3. **Backtest** across different market phases; prioritize robustness over maximum curve fit. 4. **Fine-Tuning:** * Shorter EMAs are often useful intraday (e.g., 20/100 or 34/144). * Adjust RSI levels to market characteristics (45/55 for aggressive trading, 30/70 for conservative trading). * Increase or decrease ATR multipliers depending on volatility/trading style. -- ## Notes, Limitations & Extensions * **FVG Definition:** The FVG detection used here is intentionally simplified. Those who prefer a more rigorous approach can switch to a 3-candle definition and fill levels. * **Order Blocks:** These primarily serve as a guide. Integration into entry/exit logic (e.g., retests) is possible as an extension. * **Backtest Realism:** Fills may differ from the displayed closing price. For greater accuracy, intrabar backtests or an entry indicator based on the average position price are conceivable. * **Alerts:** Currently, no alert conditions are defined; these can be added for long/short setups and status messages. * **Position Management:** By default, no scaling is performed. Partial sales, trailing stops, or multiple entries can be added. --- ## Purpose & Benefits The strategy offers a clear, modular framework: trend filter (direction), RSI contra timing (entry), SMC proxy via FVG Touch (structure), and ATR-based exits (risk adaptation). This makes it robust, easy to understand, and highly extensible—both for discretionary traders who appreciate visual SMC elements and for systematic testers who prefer a clean, parameterizable foundation.
Pine Script® strategy
by TMB_Invest
Strategy with Reference Lines📊 Strategy with Reference Lines Description: This strategy uses a contrarian approach based on the analysis of the previous candle to identify entry and exit points. The strategy draws horizontal reference lines at important levels of the previous candle and generates buy/sell signals based on the candle's direction. Key Features: 🔹 Multi-Timeframe Analysis: Configurable for 1H, 2H, 3H, 4H, 6H, 12H, and 1D 🔹 Reference Lines: High, low, close, and midpoint (50%) of the previous candle 🔹 Visual Signals: Labels with prices and actions (BUY/SELL/TP) 🔹 Optional Trading: Enable/disable automatic order execution 🔹 Complete System: Automatic entry, Take Profit, and Stop Loss 🔹 Alerts: Notifications when a new candle is detected Strategy Logic: When the previous candle is POSITIVE: Signal: 🔴 SELL at the previous candle's close Take Profit: 🎯 Midpoint (50%) of the previous candle Stop Loss: 🔴 High of the previous candle When the previous candle is NEGATIVE: Signal: 🟢 BUY at the previous candle's close Take Profit: 🎯 Midpoint (50%) of the previous candle Stop Loss: 🟢 Low of the previous candle Visual Elements: Green Line: High of the previous candle (when positive) Red Line: Low of the previous candle (when negative) Yellow Line: Close of the previous candle (always present) Blue Line: Midpoint (50%) of the previous candle (always present) Labels: Prices and actions with emojis for easy identification Settings: Timeframe: Default 4H (configurable) Auto Trading: Disabled by default (safety) Alerts: Include entry prices, TP, and SL Recommended Usage: ✅ Visual Analysis: Use with trading disabled for analysis ✅ Backtesting: Enable trading to test historically ✅ Swing Trading: Ideal for 4H or higher timeframes ✅ Risk Management: Automatic SL and TP for protection Risk Disclaimer: This strategy is for educational and analysis purposes only. Always test in a simulation environment before using with real capital. Trading involves significant risks and may result in losses.
Pine Script® strategy
by itasouza
KD The ScalperWe have to take the trade when all three EMAs are pointing in the same direction (no criss-cross, no up/down, sideways). All 3 EMAs should be cleanly separated from each other with strong spacing between them; they are not tangled, sideways, or messy. This is our first filter before entering the trade. Are the EMAs stacked neatly, and is the price outside of the 25 EMA? If price pulls back and closes near or below the 25 or 50 EMA and breaks the 100 EMA, we don't trade. Use the 100 EMA as a safety net and refrain from trading if the price touches or falls below the 100 EMA. 1. Confirm the trend- All 3 EMAs must align, and they must spread 2. Watch price pull back to the 25th or the 50 EMA 3. Wait for the price to bounce - And re-approach the 25 EMA Why is this powerful? Removes 80% of the low-probability Trades It keeps you out of choppy markets Avoids Reversal Traps Anchors us to momentum We take the entry when the price moves up again and touches the 25 EMA from below, and then when it breaks above the 25 EMA, or even better, when a lovely green bullish candle forms. A bullish candle indicates good momentum. When a bullish candle closes in green, it means the momentum has increased significantly. This is when we enter a long trade, with the stop-loss just below the 50 EMA and the profit target being 1.5 times the stop-loss. The same rule applies to the bearish trade.
Pine Script® strategy
by krish16887
1
SMA Cross 5/50 with Trend Filter & Risk Management by JuggiDThe basic SMA (5/50) crossover strategy can be enhanced to improve profitability by adding filters and risk management. For example, a long entry is triggered only when the fast SMA (5) crosses above the slow SMA (50) **and** the price is above the SMA (200), ensuring trades align with the major trend. Similarly, a short entry requires the crossover confirmation plus the price staying below the SMA (200). To reduce false signals and protect capital, stop-loss and take-profit levels can be set automatically (e.g., 2% loss, 5% gain), while additional confirmation tools such as volume spikes, RSI above 50, or MACD momentum can be applied to validate stronger signals. This approach helps avoid whipsaws in sideways markets and allows trades to capture larger moves while minimizing downside risk.
Pine Script® strategy
by MeowTools
RSI-Adaptive T3 [ChartPrime] — Strategy (Long Only, 1D)This trade has been successfully converted from an individual setup to a full strategy, and the results are truly outstanding. I’m currently testing this for Tesla options trading on the 1-day chart, and it appears to be working extremely well. A special thanks to ChartPrime for creating such a beautifully designed indicator — it’s performing impressively in these tests. If anyone would like to try it out, feel free to download and see the results for yourself. Thank you!
Pine Script® strategy
by sheazadjiwani
1
VWAP-RSI Scalper FINAL v1Description This script implements a robust, battle-tested intraday scalping strategy designed for prop firm challenges, funded trader programs, and serious futures scalpers. It combines VWAP, RSI, EMA trend, and ATR-based risk management to capture high-probability mean reversion and momentum moves during the most liquid hours of the trading day. Core Logic RSI (Relative Strength Index): Trades are triggered when the RSI is either oversold or overbought using a short lookback (default: 3). This ensures only the strongest intraday reversals or exhaustion moves are considered. VWAP Filter: Longs are only taken above VWAP, shorts only below VWAP, aligning trades with the session’s dominant bias. EMA Filter: Additional trend quality filter—longs require price above EMA, shorts below EMA. Session Control: Only trades between user-defined session hours (default: US cash session), eliminating overnight/illiquid action. ATR-based Dynamic Stops & Targets: Every trade uses a stop loss at 1x ATR and a take profit at 2x ATR for a positive risk/reward ratio. Max Trades Per Day: Prevents overtrading and controls risk exposure (default: 3). Performance (Sample Backtest) Profit Factor: 1.37+ (prop-firm quality) Drawdown: <1% (very conservative risk) Win Rate: 37–48% (RR > 1, so high edge) Consistency: Smooth, steady equity curve over hundreds of trades. Best For: ES/NQ/CL/GC intraday traders Prop firm evaluation challenges (Tradeify, Topstep, Apex, etc.) Anyone needing robust, no-nonsense systematic edge for futures or indices. How to Use & Tune Apply to 3min, 5min, or 15min charts of liquid futures or indices. Change parameters in the settings panel to suit your asset, volatility, or session hours. Use “Strategy Tester” to validate P&L, win rate, and drawdown. How to Optimize Raise/lower RSI length or bands to make signals more/less frequent. Adjust stop/target multiples for your preferred risk/reward profile. Change session hours to match your broker or market. Disclaimer This is not financial advice. Use on a demo or sim account first. Results will vary by market, slippage, and execution speed. Past performance does not guarantee future results. If you find this useful, please give it a like, follow for more strategies, and comment your results or questions! Good luck and safe trading!
Pine Script® strategy
by michaelriggs
1
Modular Range-Trading Strategy (V9.2)# 模块化震荡行情策略 (V9.2) # Modular Range-Trading Strategy (V9.2) ## 策略简介 | Strategy Overview 该策略基于布林带 (Bollinger Bands)、RSI、MACD、ADX 等经典指标的组合，通过多逻辑模块化结构识别震荡区间的价格反转机会，支持多空双向操作，并在相同逻辑下允许智能加仓，适用于震荡市场的回测和研究。 This strategy combines classic indicators such as Bollinger Bands, RSI, MACD, and ADX to identify price reversal opportunities within ranging markets. It features a modular multi-logic structure, allowing both long and short trades with intelligent pyramiding under the same logic. It is designed for backtesting and research in range-bound conditions. --- ## 功能特点 | Key Features - **多逻辑结构**：支持多套震荡逻辑（动能确认均值回归、布林带极限反转等）。 - **加仓与仓位互斥**：同逻辑下可智能加仓，不同逻辑间自动互斥，避免冲突。 - **回测可调时间范围**：可自定义回测起止时间，精准评估策略表现。 - **指标可视化**：布林带、RSI、MACD 及动态 ATR 止损线实时绘图。 - **K线收盘确认信号**：通过 `barstate.isconfirmed` 控制信号，避免未收盘的虚假信号。 - **Multi-logic structure**: Supports multiple range-trading logics (e.g., momentum-based mean reversion, Bollinger Band reversals). - **Pyramiding with mutual exclusion**: Allows intelligent pyramiding within the same logic while preventing conflicts between different logics. - **Adjustable backtesting range**: Customizable start and end dates for accurate performance evaluation. - **Visual indicators**: Real-time plotting of Bollinger Bands, RSI, MACD, and dynamic ATR stop lines. - **Close-bar confirmation**: Uses `barstate.isconfirmed` to avoid false signals before bar close. --- ## 使用说明 | Usage 1. 将该脚本添加到 TradingView 图表。 2. 在参数中设置回测时间段和指标参数。 3. 仅用于学习与策略研究，请勿直接用于实盘交易。 1. Add this script to your TradingView chart. 2. Configure backtesting dates and indicator parameters as needed. 3. For educational and research purposes only. **Not for live trading.** --- ## ⚠️ 免责声明 | Disclaimer 本策略仅供学习和研究使用，不构成任何形式的投资建议。 作者不参与任何实盘交易、资金管理或收益分成，也不保证策略盈利能力。 严禁将本脚本用于任何非法集资、私募募资或与虚拟货币相关的金融违法活动。 使用本策略即表示您自行承担所有风险与法律责任。 This strategy is for educational and research purposes only and does not constitute investment advice. The author does not participate in live trading, asset management, or profit sharing, nor guarantee profitability. The use of this script in illegal fundraising, private placements, or cryptocurrency-related financial activities is strictly prohibited. By using this strategy, you accept all risks and legal responsibilities. ---
Pine Script® strategy
by FROST_Quant
Trading Report Generator from CSVMany people use the Trading Panel. Unfortunately, it doesn't have a Performance Report. However, TradingView has strategies, and they have a Performance Report :-D What if we combine the first and second? It's easy! This script is a special strategy that parses transactions in csv format from Paper Trading (and it will also work for other brokers) and “plays” them. As a result, we get a Performance Report for a specific instrument based on our real trades in Paper or another broker. How to use it : First, we need to get a CSV file with transactions. To do this, go to the Trading Panel and connect the desired broker. Select the History tab, then the Filled sub-tab, and configure the columns there, leaving only: Side, Qty, Fill Price, Closing Time. After that, open the Export data dialog, select History, and click Export. Open the downloaded CSV file in a regular text editor (Notepad or similar). It will contain a text like this: Symbol,Side,Qty,Fill Price,Closing Time FX:EURUSD,Buy,1000,1.0938700000000001,2023-04-05 14:29:23 COINBASE:ETHUSD,Sell,1,1332.05,2023-01-11 17:41:33 CME_MINI:ESH2023,Sell,1,3961.75,2023-01-11 17:30:40 CME_MINI:ESH2023,Buy,1,3956.75,2023-01-11 17:08:53 Next select all the text (Ctrl+A) and copy it to the clipboard. Now apply the "Trading Report Generator from CSV" strategy to the chart with the desired symbol and TF, open the settings/input dialog, paste the contents of the clipboard into the single text input field of the strategy, and click Ok. That's it. In the Strategy Tester, we see a detailed Performance Report based on our real transactions. P.S. The CSV file may contain transactions for different instruments, for example, you may have transactions for CRYPTO:BTCUSD and NASDAQ:AAPL. To view the report is based on CRYPTO:BTCUSD trades, simply change the symbol on the chart to CRYPTO:BTCUSD. To view the report is based on NASDAQ:AAPL trades, simply change the symbol on the chart to NASDAQ:AAPL. No changes to the strategy are required. How it works : At the beginning of the calculation, we parse the csv once, create trade objects (Trade) and sort them in chronological order. Next, on each bar, we check whether we have trades for the time period of the next bar. If there are, we place a limit order for each trade, with limit price == Fill Price of the trade. Here, we assume that if the trade is real, its execution price will be within the bar range, and the Pine strategy engine will execute this order at the specified limit price.
Pine Script® strategy
by adolgov
4
Kaito Box with RSI Div(Dynamic Adjustment + MA + Long)The script implements a dynamic trading strategy that combines box range detection, RSI divergence signals, and moving average trend analysis. It is designed for use on OKX Signal Bots and includes features for dynamic position scaling and partial position closing. Below is a summary of its key functionalities: Key Features: Box Range Detection: The script identifies price ranges using the highest high and lowest low of a configurable boxLength period. These levels are plotted on the chart to visualize the price range. RSI Divergence Detection: The script calculates RSI using a configurable rsiLength. Detects bullish divergence when price makes a lower low, but RSI makes a higher low. Detects bearish divergence when price makes a higher high, but RSI makes a lower high. Includes separate left and right lookback periods (leftLookback, rightLookback) for precise local extrema detection. Customizable Moving Averages: Supports multiple types of Moving Averages (SMA, EMA, SMMA, WMA, VWMA). Calculates and plots MA20, MA50, MA100, and MA200 on a user-defined timeframe (custom_timeframe). Identifies uptrends and downtrends based on the alignment of the moving averages and price levels. Dynamic Position Scaling: Implements dynamic position sizing for long entries and partial position closing for exits. The percentage of position size added or closed is based on the difference between the current price and the average position price (avgPrice), with configurable minimum thresholds (minEnterPercent, minExitPercent). Signal Integration for OKX Bots: Sends buy/sell signals to OKX Signal Bots using the configured signalToken. Supports market or limit orders with configurable price offsets and investment types. Trend-Based Signal Filtering: Only triggers long signals during downtrends and short signals during uptrends, ensuring trades align with the overall market context. Visual Annotations: Plots bullish and bearish divergence signals on the chart. Displays labels showing dynamic position size adjustments and current average price during trades. How It Works: Long Signals: Triggered when the price breaches the lower box range, and a bullish RSI divergence is detected. Additional filtering ensures long trades are executed only during downtrend conditions. Dynamically adjusts the position size based on the price difference from the average entry price. Short Signals: Triggered when the price breaches the upper box range, and a bearish RSI divergence is detected. Additional filtering ensures short trades are executed only during uptrend conditions. Dynamically closes portions of the position based on price movement relative to the average entry price. Alerts: Generates actionable alerts formatted for OKX bots, including order type, signal token, and dynamically calculated position sizes. Use Case: This strategy is well-suited for automated trading on platforms like OKX, where it can: Exploit price ranges and RSI divergences for precise entries and exits. Dynamically manage position sizes to optimize risk-reward. Adapt to different market conditions using configurable parameters like moving averages, divergence lookbacks, and trend filters. This script provides a robust foundation for traders looking to automate their strategies while maintaining flexibility and control over their trading logic.
Pine Script® strategy
by aws2333
30-70 RSI Strategy with Colored BarThis script colors price bars based on Relative Strength Index (RSI) levels, giving traders a quick and visual way to assess overbought or oversold market conditions directly on the chart. 📈 Key Features: ✅ RSI-Based Bar Coloring: Green bars when RSI is above the upper threshold (default 70) – suggests bullish momentum. Red bars when RSI is below the lower threshold (default 30) – indicates bearish pressure. Bars remain uncolored when RSI is between thresholds – a neutral zone. 🔧 Customizable RSI Settings: Adjustable RSI length (default: 14 periods) Adjustable overbought/oversold levels (default: 70/30) 🧠 Helps traders: Quickly spot potential reversals or trend continuations Visually align price action with momentum 🛠️ Usage: Ideal for trend-following, reversal, and momentum strategies. Works across any timeframe (1m, 5m, 1h, daily, etc.).
Pine Script® strategy
by khetiajay