Get started

Search in scripts for "2018年4月至8月伦敦金现跌幅+期间贵金属指数表现"

Chiki-Poki BFXLS Longs Shorts Abs Normalized Volume Pro by RRBChiki-Poki BFXLS Longs vs Shorts Absolute Normalized Volume Value Pro by RagingRocketBull 2018 Version 1.0 This indicator displays Longs vs Shorts in a side by side graph, shows volume's absolute price value and normalized volume of Longs/Shorts for the current asset. This allows for more accurate L/S comparisons (like a log scale for volume) since volume on spot exchanges (Bitstamp, Bitfinex, Coinbase etc) is measured in coins traded, not USD traded. Similarly, L/S is usually the amount of coins in open L/S positions, not their total USD value. On Bitmex and other futures exchanges volume is measured in USD traded, so you don't need to apply the Volume Absolute Price Value checkbox to compare L/S. You should always check first whether your source is measured in coins or USD. Chiki-Poki BFXLS primarily uses *SHORTS/LONGS feeds from Bitfinex for the current crypto asset, but you can specify custom L/S source tickers instead. This 2-in-1 works both in the Main Chart and in the indicator pane below. You can switch between Main/Sub Window panes using RMB on the indicator's name and selecting Move To/Pane Above/Below. This indicator doesn't use volume of the current asset. It uses L/S ticker's OHLC as a source for SHORTS/LONGS volumes instead. Essentially L/S => L/S Volume == L/S Features: - Display Longs vs Shorts side by side graph for the current crypto asset, i.e. for BTCUSD - BTCUSDLONGS/BTCUSDSHORTS, for ETHUSD - ETHUSDLONGS/ETHUSDSHORTS etc. - Use custom OHLC ticker sources for Longs/Shorts from different exchanges/crypto assets with/without exchange prefix. - Plot Longs/Shorts as lines or candles - Show/Hide L/S, Diff, MAs, ATH/ATL - Use Longs/Shorts Volume Absolute Price Value (Price * L/S Volume) instead of Coins Traded in open L/S positions to compare total L/S value/capitalization - Normalize L/S Volume using Price / Price MA / L/S Volume MA - Supports any existing type of MA: SMA, EMA, WMA, HMA etc - Volume Absolute Price Value / Normalize also works on candles - Oscillator mode with negative axis (works in both Main Chart/Subwindow panes). - Highlight L/S Volume spikes above L/S MAs in both lines/oscillator. - Change L/S MA color based on a number of last rising/falling L/S bars, colorize candles - Display L/S volume as 1000s, mlns, or blns using alpha multiplier 1. based on BFXLS Longs vs Shorts and Compare Style, uses plot*, security and custom hma functions 2. swma has a fixed length = 4, alma and linreg have additional offset and smoothing params Notes: - Make sure that Left Price Scale shows up with Auto Fit Data enabled. You can reattach indicator to a different scale in Style. - It is not recommended to switch modes multiple times due to TradingView's scale reattachment bugs. You should switch between Main Chart and Sub Window only once. - When the USD price of an asset is lower you can trade more coins but capitalization value won't be as significant as when there are less coins for a higher price. Same goes for Shorts/Longs. Current ATH in shorts doesn't trigger a squeeze because its total value is now far less than before and we are in a bear market where it's normal to have a higher number of shorts. - You should always subtract Hedged L/S from L/S because hedged positions are temporary - used to preserve the value of the main position in the opposite direction and should be disregarded as such. - Low margin rates increase the probability of a move in an underlying direction because it is cheaper. High margin rates => the market is anticipating a move in this direction, thus a more expensive rate. Sudden 5-10x rate raises imply a possible reversal soon. high - 0.1%, avg - 0.01-0.02%, low - 0.001-0.005% You can also check out: - BFXLS Longs/Shorts on BFXData - Bitfinex L/S margin rates and Hedged L/S on datamish - Bitmex L/S on Coinfarm.online
Pine Script® indicator
by RagingRocketBull
3
Spiky Iguana Multi RSI Bands (Reverse RSI for the Price) by RRBSpiky Iguana Multi RSI Bands by RagingRocketBull 2018 Version 1.0 This indicator shows multiple RSI Bands with prices corresponding to specified overbought/oversold RSI levels. It is used to extrapolate the exact price levels currently matching a given set of RSI levels based on prior price/RSI levels action. You can think of it as a reverse RSI where RSI levels are moving dynamically around the price instead of price bouncing between straight lines. Features: - 6+6 = 12 customizable Overbought(R)/Oversold(S) RSI Levels + 6 Mean(M) lines - Multicolor levels/fill ranges - Show/Hide specific S/R/M levels and fill ranges 1. uses plot*, fill and is based on RSIBANDS_LB Good Luck! Feel free to explore and learn from the code
Pine Script® indicator
by RagingRocketBull
9
Balihuntul Normalized Absolute Volume by RRBBalihuntul Normalized Absolute Volume by RagingRocketBull 2018 Version 1.0 This indicator shows absolute and/or normalized volume for an asset, allows for more accurate volume based comparisons (like a log scale for volume). Volume is measured in coins traded, not USD traded, so direct comparisons of different price moves may not be accurate. Professional traders usually compare absolute or normalized volumes of trend moves/spikes/dips/capitulation events instead. When the USD price of an asset is lower you can trade more coins but capitalization won't be as significant as when there are less coins for a higher price. Similarly, you can normalize volume using: - price/price ma (to get a bit of a price-weighted volume) or - volume ma to compare it with its average assuming the total volume is a percentage above or below the MA (100% or 1). - use alpha multiplier to add/lose a few zeroes if necessary Features: - Use Absolute Price Value (Price * Volume) of an asset instead of Coins Traded (Volume) to compare capitalization - Normalize volume using Price / Price MA / Volume MA - Supports any existing type of MA: SMA, EMA, WMA, HMA etc - Oscillator mode with negative axis - Highlight high volume spikes above MA or hide low volume bars below MA - Change color based on prev Close or Volume bars - Change Volume MA color based on a number of last rising/falling bars - Display volume as 1000s, mlns, or blns using alpha multiplier Notes: 1. uses plot* and custom hma functions 2. swma has a fixed length = 4, alma and linreg have additional offset and smoothing params Feel free to use. Good Luck!
Pine Script® indicator
by RagingRocketBull
1
Strategy based on Squeeze Momentum Indicator [LazyBear]This Strategy is based on LazyBear Squeeze Momentum Indicator. I added some custom feature and filters. You can customize a lot of features to get a profitable strategy. Here is a link to original study. Please use comment section for any feedback. Next improvement (only to whom is interested to this script and follows me): study with alerts on multiple tickers all at one. Leave a comment if you want to have access to study. ********************************** IMPORTANT******************************* I have developed an expert advisor for metatrader4 (MT4) and for jforex platform: results of expert advisor form 2015-01-01 to 2018-11-25 are very good with low drawdown and good profit. ********************************************************************************
Pine Script® strategy
by 03.freeman
35
BarstateThe TradingView system has two types of bars. Bars that are historical and bars that are real-time. When programming complex scripts and strategies that use higher timeframe data there can be difficult programming conditions due to these two bar states. Especially in the case of after-hours, end of day, low volume trading and thinly traded stocks the bar state status can sometimes be historical and sometimes be real-time in different timeframes or even the same timeframe. This script displays what state a bar is in by shading the background of the chart. The script is being made publicly available to help my script users know about and understand 'barstate'. The script allows users to see the 'barstate' in order to help report bugs and conduct their own workarounds. My testing has indicated that the 'barstate' status is sometimes spurious especially on thinly traded symbols. Additionally, the Tradingview back-end calls the script only after price changes to reduce system load. As a result, these two characteristics can cause unexpected Pine Script results. Crinkebine November 2018
Pine Script® indicator
by Crinklebine
Katana Gaps Bounty Hunter Pro (Show Gaps of All Types) by RRBKatana Gaps Bounty Hunter Pro (KGB Hunter Pro, Gap Exterminator) by RagingRocketBull 2018 Version 1.0 This indicator shows/counts/filters gaps on a chart. There are several versions: Simple, Pro, Advanced and Zones. This is the Pro version. The Differences are listed below. - Simple: shows/counts gaps, changes color based on gap dir (2 colors), filters out price gaps within session, large gaps, and high volume gaps - Pro: +shows all types of gaps, multi color, pro filters (full/partial/overlapping time, price, large, candle, volume, doji, weekend gaps within delta ranges) - Advanced: +session times mask, show/count gaps only for last N bars, +min/max/filled gaps stats, dark mode - Zones: +shows gaps as dynamic horiz zones KGB Hunter Pro Gap Exterminator focuses on showing you all possible types of gaps in multiple colors. Gap theory states that price tends to return and fill the gaps, so you can use it to collect the bounty. You can apply any combination of complex filters to narrow down search results i.e., find only all: - type 3 gaps up with allowed wick-candle overlapping of up to 10% and - gap size larger than 200 and - with at least one of the candles larger than 100 and - volume change at least 40 and - spanning less than 2 bar periods and - excluding weekend gaps Features: - highlights gaps using barcolor and plotchar chars (8 colors x 2 dirs) - supports all 3 types of gap overlapping: full gap (no overlapping), wick-wick and wick-body overlapping up to a specified % of candle body - finds all types of gaps with pro filters for price, time, large, volume, timerange, candle size, doji gaps - individual show/hide flags for each gap/char based on gap type - can show/hide gaps/chars based on gap dir - changes color of gaps/chars based on gap dir/type, multi color gap type combos - displays chars above/below bar based on gap dir - can show/hide weekend gaps - counts all filtered gaps Colors: Basically There are 2 gap types (Price, Time) x 2 directions (Up, Down) x 2 modifiers (Large, Volume), Volume Gap is a separate class with its own modifiers, so more accurately: - (Price, Time) x 2 directions (Up, Down) x Large modifier - (Price Volume, Time Volume) x 2 directions (Up, Down) x Large modifier using a total of 16+1 colors or 8+1 base colors + transparency modifier depending on settings you can highlight gaps using any multi color combo from just 1 to all 16 colors (+1 gray color for weekends). basic gap = 1 base color with normal transparency price,time = 2 base colors (including basic gap) with normal transparency (+1 color) * up,down dir = +2 new base colors with normal transparency (including 2 base colors), with a total of 2*2 = 4 price/time base colors (+2 colors) * large = same 4 base colors with vivid transparency modifier (+4 colors) * volume = +2 new base colors with normal transparency, a separate class (+2 colors) * volume * up,down dir = +another 2 new base colors with normal transparency (including 2 volume base colors), with a total of 2*2 = 4 volume base colors (+2 colors) * volume * large = 4 volume base colors with vivid transparency modifier (+4 colors) weekend_gap = gray (+1 color) doji gap, candle gap, timerange gap = no special color, inherits color from parent gap type for more details, please see the Gap Color Hierarchy comments in code _________________________________________________________________________ You can find the following gap related terminology in literature: full, partial, extreme, breakaway, runaway/continuation, common, exhaustion gaps. There are no exact rules to distinguish between them, so this can't be implemented. When defining a gap it all boils down to how do you plot a gap, which points between adjacent candles do you consider a gap. Different sources apply different methodology but in practice only 3 types of gap overlapping can exist: - full gap (no overlapping), - partial (wick-wick overlapping) and - extreme partial (wick-body overlapping up to a specified % of a candle body) All these types are supported in this script. The only possible remaining option is candle-candle overlapping which is not a gap by definition. Many other script specific subtypes are also supported. Please see description of each gap type below and comments in code. General display modes - gap has 3 possible overlapping modes: full gap (no overlapping), wick-wick overlapping, wick-candle overlapping up to a specified % of candle body size (for mode 3 only) the remaining candle-candle overlapping implies not a gap by definition full gap mode will find the least amount of gaps, wick-candle - the most - gap can be either price or time, up or down, and shown above or below the candles (gap chars) - by definition, a price gap is a smaller subset of a time gap, a gap within current session with a price gap and zero time lag between bars. Therefore timerange filter is useless for price gaps, but can still be applied. On the other hand, all price gap filters can be applied to time gaps without any distinction. - gap can have multiple modifier subtypes: (price|time) * (up|down) * (large? + volume? + doji? + timerange? + weekend?) i.e. price + large + volume + doji or time + large + volume + timerange + doji + weekend - the gap is always counted only once no matter how many subtype modifiers it has - if the gap does not satisfy any of the applied flags/filters it is not shown/counted (no gap bars/chars are shown) - gap color can depend on a combo of gap type/dir and modifier subtypes or can be shown in a single base color - char color can only depend on gap dir (not type/modifiers) or can be shown in a single base color - char position can also depend on gap dir (above/below) the gap candle. Alternatively you can pin chars to the top/bottom of the screen in UI Styles. - change_by_type = true - uses gap type base colors (2 colors + optional modifiers, up to 8 colors if volume and/or large filters are enabled) - change_by_dir = true - uses gap dir base colors (2 colors + optional modifiers, up to 8 colors if volume and/or large filters are enabled) - both change_by_type and change_by_dir = true - uses both gap type and dir base colors (4 colors + optional modifiers, up to 16 colors if volume and/or large filters are enabled) - both change_by_type and change_by_dir = false - uses a single base gap color (1 color) - don't need that much colors - disable filters - highlight bars has priority over individual gap flags, when it is false all gaps are hidden regardless of their corresponding flag settings (does not affect dim weekend gaps) - show chars has priority over individual gap char flags, when it is false all char flags are hidden regardless of their corresponding flag settings - price gaps are only shown/counted when show_price_gaps flag is true. The large or volume filters can be used to narrow down results further. - time gaps are only shown/counted when show_time_gaps flag is true. The large, volume, and timerange filters can be used to narrow down results further. - doji gaps are only shown/counted when show_doji_gaps flag is true. The doji candle size and other filters can be used to narrow down results further. - show weekend gaps = true and dim weekend gaps = false - shows/counts weekend gaps - show weekend gaps = true and dim weekend gaps = true - dims weekend gaps, doesn't show/count weekwend gaps - show/dim weekend gaps do just that - show the gap if it happens on a weekend, not all weekends - large gaps are only shown/counted when the large filter is enabled != 0. positive values 5 (>= 5), negative -5 (<=5) are used to switch between <> - volume gaps are only shown/counted when the volume filter is enabled != 0. positive values 5 (>= 5), negative -5 (<=5) are used to switch between <> - timerange gaps are only shown/counted when the timerange filter is enabled != 0. positive values 5 (>= 5), negative -5 (<=5) are used to switch between <> - candle size gaps are only shown/counted when the candle size filter is enabled != 0. positive values 5 (>= 5), negative -5 (<=5) are used to switch between <> - candle size filter is the only filter with 2 arguments, use_and_for_delta to enable AND condition for the args (OR is the default) Good Luck! Feel free to explore and learn from the code
Pine Script® indicator
by RagingRocketBull
9
Katana Gaps Bounty Hunter (Show Gaps Counter) by RRBKatana Gaps Bounty Hunter (KGB_Hunter) by RagingRocketBull 2018 Version 1.0 This indicator shows/counts/filters gaps on a chart There are several versions: Simple, Pro and Zones. This is the Simple version. The Differences are listed below. - Simple: shows/counts gaps, changes color based on gap dir (2 colors), filters out price gaps within session, large gaps, and high volume gaps - Pro: +shows all types of gaps, multi color, more filters (time gaps, doji, etc) - Zones: +shows gaps as dynamic horiz zones Features: - highlights gaps using barcolor and plotchar chars (2 colors x 2 dirs) - can show/hide gaps/chars based on gap dir - changes color of gaps/chars based on gap dir - displays chars above/below bar based on gap dir - can filter out price gaps, large gaps, and high volume gaps - counts all filtered gaps Good Luck! Feel free to reuse the code and make it your own
Pine Script® indicator
by RagingRocketBull
5
PpSignal Chandelier StopThere are few indicators for MT4 which draw trailing stop line. I prefer to use Chandelier Stops. I believe that with good money management this is one of the best tools to follow a trend. About ATR trailing stop loss (Chandelier Stops) When you catch trend you can profit from most of the move. The good thing about ATR is that you have a stop loss level in place. When there is a close on the other side of ATR, it is a signal to close. No second guessing. Best time frame for ATR trailing stop loss I strongly recommend time frames such as 30m or larger. On lower time frames like 5m there is too much algo trading. I trade with ATR on 1h or 4h charts. Parameters for trailing stop Depends on pair or instrument. In most cases standard parameters will be fine. If I change anything then it is usually a Kv parameter. Standard is 3.5 and I tend to make it bigger like 3.7 or 4.0. In most cases it is around 3.7. ATR trailing stop loss (Chandelier Exit) – Metatrader download January 1, 2018 by simon in forex indicators In this section you can download ATR trailing stop loss (Chandelier Exit) for MetaTrader: – download ATR trailing stop loss (Chandelier Exit) for MetaTrader 4 – There are few indicators for MT4 which draw trailing stop line. I prefer to use Chandelier Stops. I believe that with good money management this is one of the best tools to follow a trend. About ATR trailing stop loss (Chandelier Stops) When you catch trend you can profit from most of the move. The good thing about ATR is that you have a stop loss level in place. When there is a close on the other side of ATR, it is a signal to close. No second guessing. Over 300 pips in profit thanks to ATR stop Over 300 pips in profit thanks to ATR stop Best time frame for ATR trailing stop loss I strongly recommend time frames such as 30m or larger. On lower time frames like 5m there is too much algo trading. I trade with ATR on 1h or 4h charts. Parameters for trailing stop Depends on pair or instrument. In most cases standard parameters will be fine. If I change anything then it is usually a Kv parameter. Standard is 3.5 and I tend to make it bigger like 3.7 or 4.0. In most cases it is around 3.7. Remember, it depends from pair and current situation in the market. You should experiment with few settings and check it on historical price action if they are ok. Best pairs to trade with ATR trailing stop loss Trailing stop loss works best in trending markets. That is why you should check pair if it tends to move strong or to move in range. It is not the secret that yen pairs line to move strongly. If you are looking for solid trends, you can’t go wrong with GBPJPY or EURJPY.
Pine Script® indicator
by PpSignal01
Random Walk Generator PRNG ///////////////////////////////////////////////////////////////////////////// // // Generates a random walk driven by a pseudo RNG that generates *returns* that are // uniformly distributed between your upper and lower bound. // Please drop me a note if you use the code in original or modified form. // Inspiration and support from 4X4good .... check out his scripts // // Specs: // Implementation of LCG, using "Numerical Recipes" parameter set (m,a,c) // as described in wiki article (09/2018): // en.wikipedia.org // // The "Skew" parameter raises the random return to the specified power // // Disclaimer: // The PRNG is provided "as-is" and this specific implementation has not undergone // any testing. Use at your own risk. // /////////////////////////////////////////////////////////////////////////////
Pine Script® indicator
by gb50k
3
Pseudo RNG_GB_4x4Pseudo random numbers are need to simulate "random walks" and other stochastic/markoc processes. The code is *not* a simulation. It produces a PRNG (using LCG algo) that can drive the rest of your script / simulation Notes: ///////////////////////////////////////////////////////////////////////////// // // Generates a pseudo RNG uniformly distributed between your upper and lower bound. // Please drop me a note if you use the code in original or modified form. // Inspiration and support from 4X4good .... check out his scripts // // Specs: // Implementation of LCG, using "Numerical Recipes" parameter set (m,a,c) // as described in wiki article (09/2018): // en.wikipedia.org // // Disclaimer: // The PRNG is provided "as-is" for educational purposes. The LCG algo passes tests for randomness. // This implementation/script has *not* been tested. Use at your own risk. // /////////////////////////////////////////////////////////////////////////////
Pine Script® indicator
by gb50k
Multi SMA EMA WMA HMA BB (4x3 MAs Bollinger Bands) Pro MTF - RRBMulti SMA EMA WMA HMA 4x3 Moving Averages with Bollinger Bands Pro MTF by RagingRocketBull 2018 Version 1.0 This indicator shows multiple MAs of any type SMA EMA WMA HMA etc with BB and MTF support, can show MAs as dynamically moving levels. There are 4 MA groups + 1 BB group. You can assign any type/timeframe combo to a group, for example: - EMAs 50,100,200 x H1, H4, D1, W1 (4 TFs x 3 MAs x 1 type) - EMAs 8,13,21,55,100,200 x M15, H1 (2 TFs x 6 MAs x 1 type) - D1 EMAs and SMAs 12,26,50,100,200,400 (1 TF x 6 MAs x 2 types) - H1 WMAs 7,77,231; H4 HMAs 50,100,200; D1 EMAs 144,169,233; W1 SMAs 50,100,200 (4 TFs x 3 MAs x 4 types) - +1 extra MA type/timeframe for BB compile time: 25-30 sec full redraw time after parameter change in UI: 3 sec There are several versions: Simple, MTF, Pro MTF, Advanced MTF and Ultimate MTF. This is the Pro MTF version. The Differences are listed below. All versions have BB - Simple: you have 2 groups of MAs that can be assigned any type (5+5) - MTF: +2 custom Timeframes for each group (2x5 MTF) - Pro MTF: +4 custom Timeframes for each group (4x3 MTF), MA levels and show max bars back options - Advanced MTF: +2 extra MAs/group (4x5 MTF), custom Ticker/Symbol, backreferences for type, TF and MA lengths in UI - Ultimate MTF: +individual settings for each MA, custom Ticker/Symbols Features: - 4x3 = 12 MAs of any type including Hull Moving Average (HMA) - 4x MTF groups with step line smoothing - BB +1 extra TF/type for BB MAs - 12 MA levels with adjustable group offsets, indents and shift - show max bars back - you can show/hide both groups of MAs/levels and individual MAs Notes: 1. based on 3EmaBB, uses plot*, barssince and security functions 2. you can't set certain constants from input due to Pinescript limitations - change the code as needed, recompile and use as a private version 3. Levels = trackprice implementation 4. Show Max Bars Back = show_last implementation 5. uses timeframe textbox instead of input resolution to allow for 120 240 and other custom TFs. Also supports TFs in hours: 2H or H2 6. swma has a fixed length = 4, alma and linreg have additional offset and smoothing params 7. Smoothing is applied by default for visual aesthetics on MTF. To use exact ma mtf values (lines with stair stepping) - disable it MTF Notes: - uses simple timeframe textbox instead of input resolution dropdown to allow for 120, 240 and other custom TFs, also supports timeframes in H: 2H, H2 - Groups that are not assigned a Custom TF will use Current Timeframe (0). - MTF will work for any MA type assigned to the group - MTF works both ways: you can display a higher TF MA/BB on a lower TF or a lower TF MA/BB on a higher TF. - MTF MA values are normally aligned at the boundary of their native timeframe. This produces stair stepping when a higher TF MA is viewed on a lower TF. Therefore X Y Point Density/Smoothing is applied by default on MA MTF for visual aesthetics. Set both to 0 to disable and see exact ma mtf values (lines with stair stepping and original mtf alignment). - Smoothing is disabled for BB MTF bands because fill doesn't work with smoothed MAs after duplicate values are replaced with na. - MTF MA Value fluctuation is possible on the current bar due to default security lookahead Smoothing: - X,Y == 0 - X,Y smoothing disabled (stair stepping on high TFs) - X == 0, Y > 0 - X,Y smoothing applied to all TFs - Y == 0, X > 0 - X smoothing applied to all TFs < deltaX_max_tf, Y smoothing disabled - X > 0, Y > 0 - Y smoothing applied to all TFs, then X smoothing applied to all TFs < deltaX_max_tf X Smoothing with Y == 0 - shows only every deltaX-th point starting from the first bar. X Smoothing with Y > 0 - shows only every deltaX-th point starting from the last shown Y point, essentially filling huge gaps remaining after Y Smoothing with points and preserving the curve's general shape X Smoothing on high TFs with already scarce points produces weird curve shapes, it works best only on high density lower TFs Y Smoothing reduces points on all TFs, removes adjacent points with prices within deltaY, while preserving the smaller curve details. A combination of X,Y produces the most accurate smoothing. Higher delta value - larger range, more points removed. Show Max Bars Back: - can't set plot show_last from input -> implemented using a timenow based range check - you can't delete/modify history once plotted, so essentially it just sets a start point for plotting (from num_bars bars back) that works only in realtime mode (not in replay) Levels: You can plot current MA value using plot trackprice=true or by checking Show Price Line in Style. Problem is: - you can only change color (not the dashed line style, width), have both ma + price line (not just the line), and it's full screen wide - you can't set plot trackprice from input => implemented using plotshape/plotchar with fixed text labels serving as levels - there's no other way of creating a dynamic level: hline, plot, offset - nothing else works. - you can't plot a text var - all text strings must be constants, so you can't change the style, width and text labels without recompiling. - from input you can only adjust offset, indent and shift for each level group, and change color - the dot below each level line is the exact MA value. If you want just the line swap plotshape with plotchar, recompile and save as your private version, adjust Y shift. To speed up redraw times: reduce last_bars to ~2000, recompile and use as your own private version Pinescript is a rudimentary language (should be called Painscript instead) that can basically only plot data. You can't do much else. Please see the code for tips and hints. Certain things just can't be done or require shady workarounds and weeks of testing trying to resolve weird node.js compiler errors. Feel free to learn from/reuse/change the code as needed and use as your own private version. See comments in code. Good Luck!
Pine Script® indicator
by RagingRocketBull
7
JSE Wyckoff Wave Volume Code// The Stock Market Institute (SMI) describes an propriety indicator the "SMI Wyckoff Wave" for US Stocks. This code is an attempt to make a Wyckoff Wave for the Johannesburg Stock Exchange (JSE). // The JSE Wyckoff Wave is in a separate code. This is the code for the volume of the wave. Please see code for the JSE Wyckoff Wave which goes with this indicator. // // The Wave presents a normalized price for the 10 selected stocks (An Index for the 10 stocks). // The theory is to select stocks that are widely held, market leaders, actively traded and participate in important market moves. // This is only my attempt to select 10 stocks and a different selection can be made. // I am not certain how SMI determine their weightings but what I have done it to equalize the Rand value of the stock volumne so that moves are of equal magnitude. // The then provides a view of the overall condition of the market and volume flow in the market. // // I have used the September 2018 price to normalize the stock price for the 10 selected stocks based. The stocks and weightings can be changed periodically depending on the performance and leadership. // // Please, let me know if there is a better work around this. The stocks and their weightings are: "JSE:BTI"/0.79 "JSE:SHP"/2.87 "JSE:NPN"/0.18 "JSE:AGL"/1.96 "JSE:SOL"/1.0 "JSE:CFR"/4.42 "JSE:MND"/1.40 "JSE:MTN"/7.63 "JSE:SLM"/7.29 "JSE:FSR"/8.25
Pine Script® indicator
by SteynTrade
1
JSE Wyckoff WaveThe Stock Market Institute (SMI) describes an propriety indicator the "SMI Wyckoff Wave" for US Stocks. This code is an attempt to make a Wyckoff Wave for the Johannesburg Stock Exchange (JSE). Once the wave has been established the volume can also be calculated. Please see code for the JSE Wyckoff Wave Volume which goes with this indicator. The Wave presents a normalized price for the 10 selected stocks (An Index for the 10 stocks). The theory is to select stocks that are widely held, market leaders, actively traded and participate in important market moves. This is only my attempt to select 10 stocks and a different selection can be made. I am not certain how SMI determine their weightings but what I have done it to equalize the Rand value of the stock so that moves are of equal magnitude. The then provides a view of the overall condition of the market and volume flow in the market. I have used the September 2018 price to normalize the stock price for the 10 selected stocks based. The stocks and weightings can be changed periodically depending on the performance and leadership. Most Indecies when constructed assume that all high prices and all low prices happen at the same time and therefor inflate the wicks of the bars. To make the wave more representatives for the SMI Wyckoff Wave the price is determined on the 5 minute timeframe which removes this bias. However, TradingView does not calculate properly when selecting a lower timeframe than in current period. A work around is to call the sma of the highs and add these which provides more realistic tails. Please, let me know if there is a better work around this. The stocks and their weightings are: "JSE:BTI"*0.79 "JSE:SHP"*2.87 "JSE:NPN"*0.18 "JSE:AGL"*1.96 "JSE:SOL"*1.0 "JSE:CFR"*4.42 "JSE:MND"*1.40 "JSE:MTN"*7.63 "JSE:SLM"*7.29 "JSE:FSR"*8.25
Pine Script® indicator
by SteynTrade
BTCSHORT'S secret_ETHHi everyone, I am back. After I published my first script, many people ask me if I can provide a long-short ratio script for other cryptocurrencies,ike for EOS /ETH. SO，I decided to publish a BITshort‘s secret series script. This script for Eth(Bitfinex) What’s that The indicator is BITFINEX Eth total margin positions(longs&shorts) HOW TO USE THAT ? （Similar as Bitcoin） 1·RED line is Eth total shorts.Red line corresponds to the frist number shown above 2·BLUE line is Eth total longs.Blue line corresponds to the second number shown above 3·The histogramis Long-short ratio, orange one represents taht L/S is more than 1,green one represents that L/S is less than 1. Histogram corresponds to the third number shown above. 4·The total longs and shorts has been reduced by 10000 times,Long-short ratio magnified 10 times. For example Frist number(red) is 19.8285 second(blue) is 27.1612 third(orange or green) is 13.6781 This means that total shorts is 198285 Eth total longs is 271612 Eth and L/S ration is 1.36781 I am a beginner in code writing.The script source code created by user BTCshort.Updated by user legofish123(me) 2018-9-8 Sincerely，again，Thank for BTCSHORT help with my code writing. BTCshort (Tradingview,ID is BTCSHORT) ,A Bitcoin ghost,is a man who always able to predict the price of bitcoin.So we always call him 'Raytheon' .
Pine Script® indicator
by legofish123
BTCSHORT'S secret series—— EOSHi everyone, I am back. After I published my first script, many people ask me if I can provide a long-short ratio script for other cryptocurrencies,ike for EOS /ETH. SO，I decided to publish a BTCshort‘s secret series. This script for EOS(Bitfinex) What’s that The indicator is BITFINEX EOS total margin positions(longs&shorts) HOW TO USE THAT ? （Similar as Bitcoin） 1·RED line is EOS total shorts.Red line corresponds to the frist number shown above 2·BLUE line is EOS total longs.Blue line corresponds to the second number shown above 3·The histogramis Long-short ratio, orange one represents taht L/S is more than 1,green one represents that L/S is less than 1. Histogram corresponds to the third number shown above. 4·The total longs and shorts has been reduced by 100000 times,Long-short ratio magnified 10 times. For example Frist number(red) is 99.0956 second(blue) is 111.3089 third(orange or green) is 11.2325 This means that total shorts is 9909560 EOS total longs is 11130890 EOS and L/S ration is 1.12325 I am a beginner in code writing.The script source code created by user BTCshort.Updated by user legofish123(me) 2018-9-8 Sincerely，again，Thank for BTCSHORT help with my code writing. BTCshort (Tradingview,ID is BTCSHORT) ,A Bitcoin ghost,is a man who always able to predict the price of bitcoin.So we always call him 'Raytheon' .
Pine Script® indicator
by legofish123
Multi SMA EMA WMA HMA BB (5+5 MAs + Bollinger Bands) MTF by RRBMulti SMA EMA WMA HMA BB (5+5 Moving Averages of Any Type with Bollinger Bands) MTF by RagingRocketBull 2018 Version 1.0 This indicator shows multiple MAs of any type (SMA EMA WMA HMA etc) with BB and MTF support There are several versions: Simple, MTF, Pro MTF and Ultimate MTF. This is the MTF version. The Differences are listed below. All versions have BB - Simple: you have 2 groups of MAs that can be assigned any type (5+5) - MTF: +assign 1 custom Timeframe to any group combo (5+5 Custom TF) - Pro MTF: +multiple Timeframes for multiple MA groups (4*3 MTF), horizontal levels and show max bars back options - Ultimate MTF: +individual settings for each MA, multiple Timeframes There are 2 groups of MAs, 3rd group is BB. You can: - show/hide all MAs in a group. Use length 0 to hide a particular MA independently or uncheck in Style. - apply any MA type to all MAs in a particular MA group. For example, you can assign all EMAs the HMA type. Groups are called EMAs and SMAs just for reference. - assign Custom Timeframe to a particular MA/BB group combination or all groups. For example, show daily (D) EMAs+SMAs on H1 Timeframe, or only H4 (240) BB on H1. You can use different types of MAs as dynamic S/R levels to trade of off and MA crosses as signals for possible trend change (golden/death bull/bear crosses). Current Timeframe MAs can be used together with Custom Timeframe MAs on a single chart. Higher TF MAs are more important than lower TF MAs. Most common MA types are: SMA, EMA, WMA, HMA. Most common MA lengths are: 12, 20, 26, 30, 50, 100, 200, 400 etc. MTF Notes: - Script UI uses simple timeframe textbox instead of input resolution dropdown to allow for 240 120 and other custom TFs - Groups that are not assigned a Custom TF will use Current Timeframe (0). - MTF will work for any MA type assigned to the group. BB group always uses SMA type. - MTF works both ways: you can display a higher TF MA/BB on a lower TF or a lower TF MA/BB on a higher TF. - MTF MA values are normally aligned at the boundary of their native timeframe. This produces stair stepping when a higher TF MA is viewed on a lower TF. Therefore Point Density/Smoothing is applied by default on MA MTF for visual aesthetics. Set to 0 to disable and see exact ma mtf values (lines with stair stepping and original mtf alignment). - Smoothing is disabled for BB MTF because fill doesn't work with smoothed MAs after duplicate values are replaced with na. - MTF MA Value fluctuation is possible on the current bar due to default security lookahead Features: - 2 groups of custom 5+5 MAs of any type including Hull Moving Average (HMA) - BB - 1x Custom Timeframe with step line smoothing for 3 groups (MAs + BB) 1. based on 3EmaBB, uses plot, fill, security, change, barstate, stdev and custom hma functions 2. you can't set certain constants from input due to Pinescript limitations - change the code as needed, recompile and use as a private script version 3. you can't have plot* inside ?/if/for/function, and implementing condition forks using 2 sets of plots (na vs non-na) doubles indicator params and styles - confusing 4. swma has a fixed length = 4, alma and linreg have additional offset and smoothing params Feel free to use. Good Luck!
Pine Script® indicator
by RagingRocketBull
8
Multi SMA EMA WMA HMA BB (5+5 MAs + Bollinger Bands) by RRB Multi SMA EMA WMA HMA BB (5+5 Moving Averages of Any Type with Bollinger Bands) by RagingRocketBull 2018 Version 1.0 This indicator shows multiple MAs of any type (SMA EMA WMA HMA etc) with BB on a chart at the same time with/without MTF support depending on the version. There are several versions (published later): Simple, MTF, Pro MTF and Ultimate MTF. This is the Simple version. The Differences are listed below. All versions have BB - Simple: you have 2 groups of MAs that can be assigned any type (5+5) - MTF: +assign 1 custom Timeframe to any group combo (5+5 Custom TF) - Pro MTF: +multiple Timeframes for multiple MA groups (4*3 MTF), horizontal levels and show max bars back options - Ultimate MTF: +individual settings for each MA, multiple Timeframes You can use different types of MAs as dynamic S/R levels to trade of off and MA crosses as signals for possible trend change (golden/death bull/bear crosses). Most common MA types are: SMA, EMA, WMA, HMA. Most common MA lengths are: 12, 20, 26, 30, 50, 100, 200, 400 etc. Features: - 2 groups of custom 5+5 MAs of any type including Hull Moving Average (HMA) - BB 1. based on 3EmaBB, uses plot, fill, stdev and custom hma functions 2. swma has a fixed length = 4, alma and linreg have additional offset and smoothing params Feel free to use. Good Luck!
Pine Script® indicator
by RagingRocketBull
12