Get started

Timeframe

Phoenix085-Strategies==>MTF - Average True Range + MovAvgFIRSTLY, Here are a few who have influenced my pinescripting immensely recently: @JustUncleL @BigBitsIO @TheArtofTrading @QuantNomad @SquigglesNiggles and many many many more. Overview: > This indicator is a simple crossover of Moving Averages. > In addition I am using ATR rising as an indication for Trending Price. > The entry is made once the smaller moving average crosses the bigger moving average, and also the Closes above the Smaller moving average. > but the only twist here is, - the ATR source is One timeframe Higher(In this case same as the session).whereas the source for the Moving averages is one Timeframe Lower. >i.e., if the Session is 1D, the Indicator checks if the ATR is rising in the DAILY TIMEFRAME, *_* the trade entry is made once the MOVING AVERAGE crossover happens on ONE TIME FRAME lower, as per example, ATR --> 1D = MA -->4H. > Moving Average -> - Thick -> Bigger MA, - Thin and Transparent -> Smaller MA, > Also, the Color of the Thicker MOVING AVERAGE Changes as Below: - When LongCondition is satisfied --> Color=Lime - When ShortCondition is satisfied --> Color=Red - When neither condition is satisfied --> Color=Gray NOTE: 1) There is a limitation in using the Securities function for FREE USERS --> Only 500 bars are allowed. So to use the indicators with more data, you need an upgraded TV account. 2) Strategy still needs Fine tuning, but for now, use the Thicker moving average color LIME FOR LONG ENTRIES and RED FOR SHORT ENTRIES. This is Free for Use and share
Pine Script™ strategy
by Phoenix085
2
Triple RSIThis idea behind this indicator was to show an un cluttered view of the RSI on 3 different timeframes. The RSI for the current chart highlights Lime/Red when it crosses the Overbought and Oversold levels, which are editable in the Inputs tab. RSI 2 defaults to the 1h timeframe and prints a lime dot at the top of the indicator when it's above the 50 level and a Red Dot at the bottom of the indicator when it's below the 50 level. It can also be viewed as a plot line that changes color when it's above or below the 50 level. RSI 3 defaults to the 4h timeframe and prints a blue square at the top of the indicator when it's above the 50 level and an orange square at the bottom of the indicator when it's below the 50 level. It also can be viewed as a plot line that changes color when it's above or below the 50 level. I've added the indicator multiple times to show a few of the different viewing options, with the default settings at the very bottom.
Pine Script™ indicator
by DDMyke
2
Joseph Nemeth Heiken Ashi Renko MTF StrategyFor Educational Purposes. Results can differ on different markets and can fail at any time. Profit is not guaranteed. This only works in a few markets and in certain situations. Changing the settings can give better or worse results for other markets. Nemeth is a forex trader that came up with a multi-time frame heiken ashi based strategy that he showed to an older audience crowd on a speaking event video. He seems to boast about his strategy having high success results and makes an astonishing claim that looking at heiken ashi bars instead of regular candlestick bar charts can show the direction of the trend better and simpler than many other slower non-price based indicators. He says pretty much every indicator is about the same and the most important indicator is price itself. He is pessimistic about the markets and seems to think it is rigged and there is a sort of cabal that created rules to favor themselves, such as the inability of traders to hedge in one broker account, and that to win you have to take advantage of the statistics involved in the game. He believes fundamentals, chart patterns such as cup and handle and head and shoulders, and fibonacci numbers don't matter, only price matters. The foundation of his trading strategy is based around heiken ashi bars because they show a statistical pattern that can supposedly be taken advantage of by them repeating around seventy or so percent of the time, and then combines this idea with others based on the lower time frames involved. The first step he uses is to identify the trend direction in the higher time frame(daily or 4 hourly) using the color of the heiken ashi bar itself. If it is green then take only long position after the bar completes, if it is red then take only short position. Next, on a lower time frame(1 hour or 30 minutes) look for the slope of the 20 exponential moving average to be sloping upward if going long or the slope of the ema to be sloping downward if going short(the price being above the moving average can work too if it's too hard to visualize the slope). Then look for the last heiken ashi bar, similarly to the first step, if it is green take long position, if it is red take short position. Finally the entry indicator itself will decide the entry on the lowest time frame. Nemeth recommends using MACD or CCI or possibly combine the two indicators on a 5 min or 15 min or so time frame if one does not have access to renko or range bars. If renko bars are available, then he recommends a 5 or 10 tick bar for the size(although I'm not sure if it's really possible to remove the time frame from renko bars or if 5 or 10 ticks is universal enough for everything). The idea is that renko bars paint a bar when there is price movement and it's important to have movement in the market, plus it's a simple indicator to use visually. The exit strategy is when the renko or the lowest time frame indicator used gives off an exit signal or if the above conditions of the higher time frames are not being met(he was a bit vague on this). Enter trades with only one-fifth of your capital because the other fifths will be used in case the trades go against you by applying a hedging technique he calls "zero zone recovery". He is somewhat vague about the full workings(perhaps because he uses his own software to automate his strategy) but the idea is that the second fifth will be used to hedge a trade that isn't going well after following the above, and the other fifths will be used to enter on another entry condition or if the other hedges fail also. Supposedly this helps the trader always come out with a profit in a sort of bushido-like trading tactic of never accepting defeat. Some critics argue that this is simply a ploy by software automation to boost their trade wins or to sell their product. The other argument against this strategy is that trading while the heiken ashi bar has not completed yet can jack up the backtest results, but when it comes to trading in real time, the strategy can end up repainting, so who knows if Nemeth isn't involving repainting or not, however he does mention the trades are upon completion of the bar(it came from an audience member's question). Lastly, the 3 time frames in ascending or descending fashion seem to be spaced out by about factors of 4 if you want to trade other time frames other than 5/15min,30min/1hour, or 4hour/daily(he mentioned the higher time frame should be atleast a dozen times higher than the lower time frame). Personally I have not had luck getting the seventy+ percent accuracy that he talks about, whether in forex or other things. I made the default on renko bars to an ATR size 1 setting because it looks like the most universal option if the traditional mode box size is too hard to guess, and I made it so that you can switch between ATR and Traditional mode just in case. I don't think the strategy repaints because I think TV set a default on the multi-time frame aspects of their code to not re-paint, but I could be wrong so you might want to watch out for that. The zero zone recovery technique is included in the code but I commented it out and/or remove it because TV does not let you apply hedging properly, as far as I know. If you do use a proper hedging strategy with this, you'll find a very interesting bushido type of trading style involved with the Japanese bars that can boost profits and win rates of around possibly atleast seventy percent on every trade but unfortunately I was not able to test this part out properly because of the limitation on hedging here, and who knows if the hedging part isn't just a plot to sell his product. If his strategy does involve the repainting feature of the heiken ashi bars then it's possible he might have been preaching fools-gold but it's hard to say because he did mention it is upon completion of the bars. If you find out if this strategy works or doesn't work or find out a good setting that I somehow didn't catch, please feel free to let me know, will gladly appreciate it. We are all here to make some money!
Pine Script™ strategy
by SparkyFlary
12
Renko MTF - Traditional and ATRSomehow there aren't too many renko bars that have the traditional setting built-in so I put one up. This one has the option to choose between Traditional and ATR, the size number corresponds to the option that was chosen. And just in case if anyone wanted, I put up a multi-time frame option to choose the time frame the bars take place. D is for day, W is for week, flat numbers are in minutes, and leaving it blank looks at the current time frame the chart is in. The calculation comes from how Tradingview handles renko bars. Renko bars don't paint a color unless the market moves a certain amount based on its settings. When the market moves up it turns green, if it moves down it turns red, simple color changes alone can say a lot. They're a good way to try to find trends somewhat objectively and seem to be a good way to eliminate time and can replace other time-based indicators that can whipsaw or lag. The bars have a tendency to repeat themselves so it's a good way to find trends. There aren't too many settings for the box size, most people either just choose 5, 10, 14, etc where as other indicators have many options that differ on different markets. The numbers can be chosen easily enough to pick a sweet spot with just a single input where other indicators such as MACD have multiple inputs to pick the right number that can make it difficult to choose from(although it won't be as precise as a MACD would sometimes but can be worth the objectiveness and consistency and same setting repeatability in different markets in my opinion). Some example strategies could be to use them as an alternative trailing stop, finding trends, a simple color change for entry and exit on top of other strategies, etc. It can do the job of many in an all in one price action type indicator(although not better all the time, it can come close enough). Despite all this, it does seem to depend on which time-frame it's being looked at, how TV does the calculation for it, and how one can use this with the lack of practical information on it out there.
Pine Script™ indicator
by SparkyFlary
17
Moving Averages - 5 Ribbon MTF HeatmapThis is a 5 Ribbon heatmap moving averages indicator where each represents a different time frame, The RED or GREEN color palette is also affected by asset velocity using ATR. Supports various moving averages including VMA (Default), Zero Lag, TSF (Time Series Forecast). A single ribbon is set to GREEN when fast MA (moving average) is above the slower MA and RED when fast MA is below the slower MA. In the settings you can set the ATR length (Average True Range) which will affect the velocity calculation for the colors, higher ATR length will smooth the coloring more (Less color changes), while lower ATR will show more instant changes. HOW TO USE? The brighter the GREEN is the stronger the up trend. The brighter the RED is the stronger the down trend. A weakening GREEN color can be a sign for a down reversal. A weakening RED color can be a sign for a up reversal . Supports alerts when fast moving average crosses slow moving average from all time frames, either way, up or down. Comments/Suggested/Positive feedbacks are welcome and can make this indicator even better. Follow for upcoming indicators: www.tradingview.com
Pine Script™ indicator
by dman103
11
MTF VWAP + Fibo Incremental deviationsI made a Fibo variant of my first script "VWAPs + devs" : This new indicator give you the possibility to plot multi timeframes VWAP (D, W, M, 3M and 12M ) and Fibo deviations for each one. VWAP is a powerfull indicator which is used by big players to get informations if the price is "overbought" or "oversold". Deviations give the opportunity to have supports and resistances in those "over"-zones. I searched for better results and found those defaults values : Fib 1 level : 0.618 Fib 2 level : 0.786 Fib 3 level : 1.000 Fib 4 level : 1.618 Fib 5 level : 2.618 In the thumbnail, we can see that the 1.618 deviation level made a great support on the last uptrend for BTCUSDT . You can change each values but low ones as 0.382 and 0.5 don't give really interesting supports/resistances. I made this script as clear and simple as possible with only one menu in the parameters. Some examples of what you can do : BTCUSDT (Binance) H4 / D, W, M, 3M ,12M VWAP without devs BTCUSDT (Binance) M5 / Daily VWAP + Fibo devs Hope this will be useful for you !
Pine Script™ indicator
by Mysteriown
1
Parabolic SAR (MTF)This is a multi-timeframe Parabolic SAR indicator which uses 1 and 4 hour charts. Using this indicator is simple, if the LifeTime line is green then buy, if red then sell OR don't trade. So... Green Line - This strategy is in a buy position Red Line - This strategy is in a sell position Any other colour - DON'T TRADE The traders approach is simple, when all indicators are green or red, then take the trade. As soon as one indicator changes, then re-evaluate using your normal process, such as price action, to determine whether to close the trade or continue. If you require any further information or script modifications, please message me. PLEASE CHECK OUT MY OTHER SCRIPTS
Pine Script™ indicator
by ForexResearchLabs
1
Supertrend (MTF) & Parabolic SAROne of my mixed approach strategy indicators which includes: - Parabolic SAR - 1 Hour Supertrend - 4 Hour Supertrend Whilst this script may appear slow due to the 4hr Supertrend, it does a great job of managing breakouts. Using this indicator is simple, if the line labeled Lifetime is green then buy, if red then sell OR don't trade. So... Green Line - This strategy is in a buy position Red Line - This strategy is in a sell position Any other Color - DON'T TRADE The traders approach is simple, when all indicators are green or red, then take the trade. As soon as one indicator changes, then re-evaluate using your normal process, such as price action, to determine whether to close the trade or continue. If you require any further information or script modifications, please message me. PLEASE CHECK OUT MY OTHER SCRIPTS
Pine Script™ indicator
by ForexResearchLabs
11
London Open Range Breakout by KviateqThis script is what I currently use to day trade forex on a 5-minute timeframe. The script features Multi-timeframe EMA20 that uses timeframe multipliers and is smoother by the factor by which you're multiplying your current timeframe. Default settings are set to display EMA20 on the current (M5) timeframe, as well as M15, H1, H4 and D1 timeframes. The background color changes intensity based on how many conditions are met - are all EMAs in the right order, is the current close above/below all the EMAs. Featured is also a range set to 1 hour since the London breakout (can be changed to M15, or however long you'd like - my current setting is 30 minute). Also featured are levels that I find to be of most importance - such as Daily and Weekly Open, Previous Day's and Week's Highs. The idea is to only take trades when all stars align - EMAs, break above/below the Opening Range and not to long/short into an important level.
Pine Script™ indicator
by hundredtoamillion
6
Higher Timeframe Trend Indicator V3.0What is it? An indicator that depicts the trend of up to 5 higher timeframes on the same chart without needing to context-switch between charts. Features - Supports up to 5 timeframes - Trends indicated by 5 colored buttons: one for each timeframe - Varying shades of green: uptrend - Varying shades of red: downtrend - White/silver: sideways/neutral - Configurable length (time period) for each timeframe - Increase length to capture long term trends; decrease it to capture only short term ones - Configurable sensitivity for each timeframe - Sensitivity determines what angle is considered trending and what is not - Increase sensitivity to capture weak trends - Decrease sensitivity to filter out weak trends and capture only strong/steep ones - Sensitivity ranges from 1 (least sensitive) to 3 (most sensitive) - Move the labels around vertically for better visibility by changing the "Location" and "Offset" parameters How should one use it? Use it to quickly browse through charts to understand the context across timeframes, and zero in on only those that have trends aligning on the higher and lower timeframes as per your strategy. For e.g., a chart that is trending up strongly on the 15min and 60min (indicated by dark green colored buttons), and trending down on the 1 and/or 5 min (indicated by red-colored buttons), can be shortlisted for a potential pullback trade. Use your favorite pullback strategy (Supply/Demand, Support/Resistance, Moving Averages, etc.) to hop in on the trend. How are trends determined? The indicator uses normalized %change in price of the linear regression line segment of the chosen price sources (close, high, low, MA, etc.) over a specified length to determine trend direction and intensity Known Issues Will indicate the trend correctly only for timeframes *higher* than the current (visible) resolution/timeframe of the chart. Might not indicate it correctly for lower timeframes ( i.e., lower than the current (visible) resolution/timeframe of the chart). For this reason, all timeframes lower than the current resolution will be hidden in the present release. Future releases - I am still experimenting with various sensitivity levels and the corresponding trend shades to make the tool as accurate and intuitive as possible. These modifications might come in - Sensitivity levels might be increased. - Bug fixes, if any
Pine Script™ indicator
by the_MarketWhisperer
10
Efficient Support & Resistance LevelsThis script is a mixture of my two previous scripts "True Strong Classical Support/Resistance Levels" and "Hidden Supports & Resistances + Round Levels". This combination brings on better identification of the most efficient support/resistance levels. Note that "Hidden SnR Levels" part of the code is only expected to work on Forex charts, but apart from that, the other parts could be applied to any chart. The script may: - Draw classical support/resistance levels which retraced the price previously, aided by multi-timeframe analysis - Draw hidden support/resistance levels based on psychological patterns of the price - Adjust to wicks better than Pine Script built-in pivot functions - Differ the levels color based on chart reactions - Merge nearby classical levels to avoid congestion on the chart Feel free to use it and send me your thoughts.
Pine Script™ indicator
by informanerd
10