Get started

Volumeanalysis

Volume Analysis*Sourced code from Volume Flow v3 by oh92 for Bull\Bear volume flow calculations. Thank you so much for your engineering skills! This indicator integrates the Ma-over-MA crossover strategy in oh92's V3 DepthHouse calculation with a volume-over-MA calculation to further narrow down "Areas of Interest" levels for a potential re-test zone to the right of the chart. I added a Moving Average calculation for a multi-level cloud and further broke down more conditions to highlight both volume flow crossover on the High and Extreme High MA's and also high and extreme high volume spikes on set period average without bull\bear conditions. Original Bull/Bear Spikes are still viewable although that was the only plot from oh92's script that was integrated. Session backgrounds set for research purposes. Please note: Setting MA Cloud to "None" will remove all plots calculated with the MA Cloud from the chart entirely. Turn off visuals in the Style tab.
Pine Script™ indicator
by goofoffgoose
40
Point of Control V2 The genesis of this project was to create a POC library that would be available to deliver volume profile information via pine to other scripts of indicators and strategies. This is a republish of an invite only script to open access This is the indicator version of the library function. A few points of significance: - Allows the choice of reset of the study period, day/week or bars. This is simple enough to expand to other conditions - Bar count resets starting from the beginning of the data set (bar index =0) vs bars back from the end of the data set - A 'period' in this context is the time between resets - the start of the POC (eg. start of Day or Week) until it resets (for example at the beginning of a next day or week) - Automates the determination of the increment level rather than the user specifying ticks or price brackets - Does not allow for setting the # of rows and then calculating the implied price increment levels - When a period is complete it is often useful to look back at the POCs of historical periods, or extend them forward. - This script will find the historical POCs around the current price and display them rather than extend all the historical POC lines to the right - This script also looks across all the period POCs and identifies the master POC or what I call the Grand POC, and also the next 3 runner up POCs This indicator is also available as a library. BINANCE:BTCUSDT NSE:NIFTY OANDA:XAUUSD NASDAQ:AAPL TVC:USOIL
Pine Script™ indicator
by JohnBaron
28
PointofControlLibrary "PointofControl" POC_f() The genesis of this project was to create a POC library that would be available to deliver volume profile information via pine to other scripts of indicators and strategies. This is the indicator version of the library function. A few things that would be unique with the built in - it allows you to choose the kind of reset of the period, day/week or bars. This is simple enough to expand to other conditions - it resets on bar count starting from the beginning of the data set (bar index =0) vs bars back from the end of the data set - A 'period' in this context is the time between resets - the start of the POC until it resets (for example at the beginning of a new day or week) - it will calculate an increment level rather than the user specifying ticks or price brackets - it does not allow for setting the # of rows and then calculating the implied price levels - When a period is complete it is often useful to look back at the POCs of historical periods, or extend them forward. - This script will find the historical POCs around the current price and display them rather than extend all the historical POC lines to the right - This script also looks across all the period POCs and identifies the master POC or what I call the Grand POC, and also the next 3 runner up POCs There is a matching indicator to this library
Pine Script™ library
by JohnBaron
7
Banknifty Volume - IN This simple indicator computes the average Relative Strength Index of each Banknifty stock and displays the volume on the chart with color schemes while the average line indicates the average RSI of all Bank Stocks. This indicator works on Banknifty and its stocks. It works on all time frames How You can use this? You can use this indicator for Volume analysis if the average RSI line is above the 0 line, the stock is moving upside and vice versa for Downside .
Pine Script™ indicator
by TradingTail
3
Volume Trend Meter LTFA new take to an already popular indicator of mine, now with lower time frame support for a volume called Volume Trend Meter LTF (VTML). The VTM LTF indicator measures the volume pressure at a specific part of the candle (Start, Middle, or the end of the candle) and displays it as a histogram. This indicator sums up all green candle volumes and red candle volumes over the selected part of the candle (Select in settings - start end or middle) and plots their values by subtracting increasing volume and decreasing volume. Use this indicator to identify increasing volume with the green candles (close bigger than open) and increasing volume of the red candles (close is smaller than open). Can also work on daily charts and higher. ======= Calculation ========== For Green Column: The total Volume of green candles is higher than the total red candle volume. For Red Column: The total Volume of red candles is higher than the total green candle volume. ======= Volume Trend Meter LTF Colors ======= Green: Increasing buying pressure. Red: Increasing selling pressure. My original VTM (not the lower time frame version): Like if you like and Follow me for upcoming indicators/strategies: www.tradingview.com
Pine Script™ indicator
by dman103
18
Intraday predictive High Volume Activity sessions [BEA]Idea: This indicator is designed to know the high traded volume sessions in advance before the day starts. The predictive volume bars will be plotted in advance once a new trading session starts. Logic Used: The basic idea is to store each bar volume / Volume MA data for the selected time. So, the first bar of each data is stored for all selected historical days. Once the data is stored, I am taking average of each bar data for the selected Historical days. How to Use: This gives me an idea of the volume behavior throughout the days based on historical data. So I decide my time of trading for that specific times sessions where the traded volume activity is high. The bars which are more than the Moving average ( Highlighted Volume bars plotted in future ) is the time session to focus. Designed only for intraday timeframes. Here in the image, you can see the session in advance for high traded volume activity. Try it test it , let me know if it can be improved further. Have a happy trading. DISCLAIMER Any and all liability for risks resulting from investment transactions or other asset dispositions carried out by the user based on information received or a market analysis is expressly excluded by me. All the information made available here is generally provided to serve as an example only, without obligation and without specific recommendations for action. It does not constitute and cannot replace investment advice. We therefore recommend that you contact your personal financial advisor before carrying out specific transactions and investments. Do your own research, this is not a financial advice.
Pine Script™ indicator
by TJalam
16
Buying Selling Volume v3Bug fixed from v2. Currently adds up values correctly. Note: To get more accurate readings reduce the time frame. For some reason it isn't counting the last bar and I am not smart enough to figure out why. Builds on Ceyhun's "Buying Selling Volume" indicator. This version allows users to define periods by effortlessly dragging two points or you may define periods by manually entering the start and end times in the settings window. Once the period is defined, both buying and selling volume will be totaled thus displaying the amount of buys and sells in that period. I have found the information provided from the script helps in defining a period of consolidation as either being accumulative or distributive.
Pine Script™ indicator
by ceevee12312
8
Intrabar On Balance VolumeAn experimental modification of TradingView's built-in OBV indicator that calculates its value with intrabar data. This leads to a more accurate OBV trace because it considers the price swings that happen within the time period of each candle, instead of only considering the candle close price. For example: on a 4H timeframe a single candle spans 4 hours. In this indicator the OBV is calculated with 1-minute intrabar data, leading to a resolution of 240 intrabars per 4H candle (that is, it considers the volume and price swings that happened at each minute of those 4 hours).
Pine Script™ indicator
by RNavega
Singular and Cumulative Volume Delta (SVD+CVD)This a Volume Delta indicator with Cumulative Volume Delta. I have been studying Volume Delta and CVD trading strategies and indicator styles. This implementation was developed to test a basic trailing window / oscillator approach. Script has been republished as public and searchable. Changelog from private era follows. Jun 9 (2022) Release Notes: Added option to use EMA/SMA based cumulation. This will not scale well with singular data, so default view is still SUM. Jun 9 (2022) Release Notes: Outdated comment correction. Jun 9 (2022) Release Notes: Added default option to normalilze visual scale of MA cumulation types. The averaging creates a singular value sized results, instead of a range-sums. This multiples that candle result by the range length to get a range-sum sized result. Added option to scale the cumulation size relative to the volume size. 1-to-1 scaling creates singular deltas that can be hard to see with all options on. This allows you to beef them up for visual or weighting purposes. Jun 15 (2022) Release Notes: * Added break even level for current delta. Tells where current delta must land for cumulative delta to stay flat. * Added comparison of historical cumulative levels to current level. The historical levels are the initial values going into current accumulation window. * Changed title of indicator to be more generic, clear, and searchable. Jun 15 (2022) Release Notes: * Added option to have the cumulation cutoff line AFTER or OVER the end of the cumulation window. This change is to ensure the indicator clearly documents it's behavior and avoids confusion on this / last cumulation window semantics. * Bugfix: Initial levels were pulled from cumulation line which was AFTER end of window. This has been changed to the initial values INSIDE the cumulation window. * Code cleanup. June 17th (2022) Release Notes: Marked as beta because TV confirmed they no longer allow private scripts to be changed to public. (Despite lingering documentation that says otherwise. June 17th (2022) Re-published as public.
Pine Script™ indicator
by JollyWizard
26
SuperTrend Trapping Candle StrategyHello traders! How this indicator works? The main functionality of this indicator is to find entry based upon SuperTrend indicator. This indicator helps us to find trapping candle to enter into the market. What is a trapping candle? A trapping candle is a candle that shows strength in opposite direction to SuperTrend. This helps us to enter in a trade before the move start in the current trend's direction. There are two types of trapping candles signals I have added currently: 1. Volume is high than previous candle in the opposite direction. 2. 3 candles of opposite direction with decreasing volume . How to enter in a trade in uptrend market? SuperTrend shows a green signal A green triangle formed below red candle Enter into the trade when price is above red candle high SL could be place below red candle or swing low if it is near How to enter in a trade in downtrend market? SuperTrend shows a red signal A red triangle formed above green candle Enter into the trade when price is below green candle low SL could be place above green candle high or swing high if it is near How to avoid to enter in a trade in sideways market? You can follow price action strategies Or you can follow some indicator to find sideways market Indicator settings and how to change? ATR Length - For SuperTrend, this is default value. Factor - For SuperTrend, changed to 2 to provide fast signals. Candle Height - For trapping candle price, default set to 0.003% of the current price.
Pine Script™ strategy
by thehemantkaushik
2
Volume Profile, Pivot Anchored by DGTVolume Profile (also known as Price by Volume ) is an charting study that displays trading activity over a specified time period at specific price levels. It is plotted as a horizontal histogram on the finacial isntrumnet's chart that highlights the trader's interest at specific price levels. Specified time period with Pivots Anchored Volume Profile is determined by the Pivot Levels, where the Pivot Points High Low indicator is used and presented with this Custom indicator Finally, Volume Weighted Colored Bars indicator is presneted with the study Different perspective of Volume Profile applications; Anchored to Session, Week, Month etc : Anchored-Volume-Profile Custom Range, Interactive : Volume-Profile-Custom-Range Fixed Range with Volume Indicator : Volume-Profile-Fixed-Range Combined with Support and Resistance Indicator : Price-Action-Support-Resistance and Volume-Profile Combined with Supply and Demand Zones, Interactive : Supply-Demand-and-Equilibrium-Zones Disclaimer : Trading success is all about following your trading strategy and the indicators should fit within your trading strategy, and not to be traded upon solely The script is for informational and educational purposes only. Use of the script does not constitutes professional and/or financial advice. You alone the sole responsibility of evaluating the script output and risks associated with the use of the script. In exchange for using the script, you agree not to hold dgtrd TradingView user liable for any possible claim for damages arising from any decision you make based on use of the script
Pine Script™ indicator
by dgtrd
223
Delta Volume by SiddWolfDelta Volume is Difference between Buying Volume and Selling Volume. This indicator gives the Delta Volume based on Lower TimeFrame Candles. It utilizes security_lower_tf() function, a function that provides Lower TF candle data in Higher TF Chart. security_lower_tf() is a new function provided by TradingView yesterday. If you are a PineScript Programmer, I suggest you to read about it, as it is a very powerful function that can extremely improve your trading strategy. How this indicator works: This indicator checks volume data on lower TimeFrame Candles and Shows it's delta in the current Chart Timeframe. For example: If you open 4 hours chart, this indicator checks volume of 1 minute chart and separates Buying-Selling volume. Then it subtracts Candle's Selling volume from Candle's Buying volume, finally calculating the Delta Volume. This indicator also provides a Smooth Delta Volume, which is moving average of Delta Volume. As Delta Volume changes a lot, Smooth Delta Volume can be very helpful for identifying Trends . Goto settings and in "Show" section select "Smooth Delta Volume" to lay it on the chart. Settings is the Key: Settings are key to all of my indicators. Play around with it a bit. You can change what to show on the chart from settings. Smooth Delta Volume moving average length can be changed from the settings. You can also select "Show as Percentage", which shows Delta Volume as Percentage of Overall Candle's Volume. If you use Weekly or Monthly Timeframe, change increase lower timeframe from settings. Read the tooltips to understand what each settings mean. Tooltips are the (i) button in-front of each settings. FAQs: Q. Does the indicator Repaint ? --- No. None of my indicators repaints. What you see now is what's drawn in real time. Q. What TimeFrame is Best for this Indicator ? --- It can be used on timeframes from 5 minutes to higher. But I would prefer to use it from timeframes higher than 30 minutes, as it gathers data from 1 minute TF. Q. Indicator doesn't show anything ? --- This indicator only works on security with Volume data. Also use it from higher timeframe than specified in Settings, because Volume Delta is calculated using Data from Lower TimeFrame. Q. Delta volume is not provided by TradingView, So how exactly does this indicator work? --- This indicator takes advantage of new pinescript function security_lower_tf(), and calculates volume for smaller timeframe data and calculates delta on higher timeframe. Q. Does this indicator give financial advice? --- No. Nope. Nein. Não. नहीं. Conclusion: This indicator is very basic but if used correctly it can be very powerful. If you have any questions or suggestions feel free to comment below. I'd love to connect with you. Thank you. ~ @SiddWolf
Pine Script™ indicator
by SiddWolf
22
Liquidity Heatmap LTF [LuxAlgo]This indicator displays column heatmaps highlighting candle bodies with the highest associated volume from a lower user selected timeframe. Settings LTF Timeframe: Lower timeframe used to retrieve the closing/opening price and volume data. Must be lower than the current chart timeframe. Other settings control the style of the displayed graphical elements. Usage It can be of interest to show which candles from a lower timeframe had the highest associated volume, this allows for the highlighting of areas where a candle body was the most traded by market participants. The area with the highest activity is highlighted in the script with a yellow color (or another user selected color) and additionally by two lines forming an interval. When the candle body with the highest volume is overlapped by a candle body with lower volume this one will be highlighted instead, hence why certain areas of high activity might not be highlighted by the heatmap. It is recommended to hide regular candles or use a more discrete graphical presentation of prices when using this tool. Lines are also displayed to highlight the full candle range as well as if a candle was bullish (in green) or bearish (in red). These lines can be hidden if the user is only interested in the heatmap.
Pine Script™ indicator
by LuxAlgo
30
Volume Impulse & Candlestick Patterns - FontiramisuIndicator showing volume impulse & engulfing candlestick pattern. You can set up multiple parameter for both events. Volume Impulse : Volume Period : Lenght of the average volume calculated. Volume Multiplier : Factor to compare actual volume with average volume. Engulfing Pattern : VS avg body : Let you chose to compare body candle to average body of the last few candles (define with parameter : lenghtSizeAvgBody ), otherwise it will be compared to the last body candle. Engulfing Multiplier : Factor to compare and validate the pattern.
Pine Script™ indicator
by Fontiramisu
7
Volume Spikes & Growing Volume Signals With Alerts & ScannerVOLUME SPIKES & GROWING VOLUME SIGNALS WITH ALERTS & SCANNER This indicator shows arrows when there is a volume spike. It also paints the background when volume is growing. There is also a volume scanner for 8 tickers that will change color in real time when your other favorite tickers see volume growth and spikes. You can customize the length of DMI, the number of bars to calculate the current volume average from, the number of bars back to get the overall volume average from, the multiple that needs to be hit to give a signal, the position of the scanner table and which tickers are used in the scanner. There are detailed directions as tooltips in the indicator settings you can read to understand exactly what each input does. All features are customizable as well as which tickers the screener uses. ***HOW TO USE*** Watch for volume to pick up before placing trades as this will help you stay out of the markets when price is choppy. Volume usually brings volatility so watch for the volume signals to show up on the chart. Typically when price has made a big move one direction or is consolidating and you see the volume indicator start giving signals, the market is ready to reverse or continue its current trend but move faster in that direction. Volume Spikes When there is a volume spike that is larger than the average of volume over the last 100+ bars(depending on your settings) multiplied by the volume amount multiplier(in your settings) then an arrow will show up on the chart. This arrow will be green if DMI is bullish and red if DMI is bearish. Volume Growth A Background color will appear when the average volume over the last 5 bars(depending on your settings) is higher than the average volume over the last 100+ bars(depending on your settings) and is greater than your multiple. It will also paint the background when the volume moving average has increased over the last 3 bars consecutively. The background colors will be red or green depending on buy & sell pressure(DMI). If the background color appears, then you know volume is growing and volatility is near. Volume Scanner The scanner can be customized to have all of your favorite tickers by changing the tickers used in the indicator settings at the bottom. When no volume growth or spikes are detected, the ticker will show as light blue. When volume spikes or growth is detected, the ticker will turn orange to notify you. Alerts You can set up alerts as well when there is volume growth, bullish volume spikes and bearish volume spikes on any chart or timeframe. Indicator Settings Settings will need to be adjusted across different tickers as some have large swings in volume and some stay pretty even, so make sure to set up different chart layouts with settings that work for each ticker and save them individually so you don’t have to reset these values every time you switch charts. ***MARKETS*** This indicator can be used as a signal on all markets, including stocks, crypto, futures and forex as long as Tradingview has volume and DMI data for that ticker. ***TIMEFRAMES*** This volume spike indicator can be used on all timeframes as long as there is enough data for Tradingview to use for calculations. ***TIPS*** Try using numerous indicators of ours on your chart so you can instantly see the bullish or bearish trend of multiple indicators in real time without having to analyze the data. Some of our favorites are our Auto Fibonacci, Volume Profile, Momentum, Auto Support And Resistance and Money Flow Index in combination with this Volume Growth indicator. They all have real time Bullish and Bearish labels as well so you can immediately understand each indicator's trend.
Pine Script™ indicator
by FriendOfTheTrend
12
Hull Volume WavesInspired by the works of David Weis, this indicator is an alternative to his classic Weis Volume Waves. As the name implies, this indicator uses a Hull Moving Average to detect price swings, and calculates the cumulative volume for each of them, separating the up swings from the down swings. The chosen length of the HMA determines the size of each swing, meaning lower lengths will detect microswings while higher lengths will only include the main swings. The length of each swing also determines the color of the upward and downward waves, and you can choose 2 colors each to generate a bullish and bearish gradient. Extreme values are highlighted in the background. The indicator will compare the current up wave to the last N up volumes, or the current down wave to the last N down volumes. The lookback length can be changed in the menu. I hope you find it useful!
Pine Script™ indicator
by FractalTrade_
6
Candle Colored by Volume Z-score [Morty]This indicator colors the candles according to the z-score of the trading volume. You can easily see the imbalance on the chart. You can use it at any timeframe. In statistics, the standard score (Z-score) is the number of standard deviations by which the value of a raw score (i.e., an observed value or data point) is above or below the mean value of what is being observed or measured. Raw scores above the mean have positive standard scores, while those below the mean have negative standard scores. This script uses trading volume as source of z-score by default. Due to the lack of volume data for some index tickers, you can also choose candle body size as source of z-score. features: - custom source of z-score - volume - candle body size - any of above two - all of above two - custom threshold of z-score - custom color chemes - custom chart type - alerts default color schemes: - green -> excheme bullish imbalance - blue -> large bullish imbalance - red -> excheme bearish imbalance - purple -> large bearish imbalance - yellow -> low volume bars, indicates "balance", after which volatility usually increases and tends to continue the previous trend Examples: * Personally, I use dark theme and changed the candle colors to black/white for down/up. Volume as Z-score source Any as Z-score source, more imbalances are showed
Pine Script™ indicator
by M0rty
9
[blackcat] L1 Markos Katsanos Volume Flow IndicatorLevel 1 Background Markos Katsanos’ volume flow indicator (VFI) calculation uses a default period of 130 days for daily charts. As a result, when applying the strategy, you will need to set the maximum number of bars the study will reference in the general tab of properties for all to at least 130. In order to compare the system objectively with the buy & hold results, he specified a trade size as a percent of equity. Function For more information see Markos Katsanos's articles in the June 2004 and July 2004 issues of Technical Analysis of Stocks & Commodities magazine. Period=days for VFI calculation. Default values are 130 for daily and 26 for weekly charts.Coef=coefficient for minimal price cut-of (use 0.2 for daily and 0.1 for intraday 5-15 min data) Vcoef=coefficient for volume cut-off (use 2.5 for daily and 3.5 for intraday charts) Remarks This is a Level 1 free and open source indicator. Feedbacks are appreciated.
Pine Script™ indicator
by blackcat1402
3