Get started
Copper Futures (Apr 2019)Copper Futures (Apr 2019)Copper Futures (Apr 2019)

Copper Futures (Apr 2019)

No trades
See on Supercharts
Overview News
Ideas
Discussions Forward curve Seasonals Contracts

HGJ2019 trade ideas

Copper ### **📉 Copper Futures Trade Setup (15M Chart) 📉** 🔹 **Pattern:** Gartley Harmonic Pattern 🔹 **Entry Zone:** 866.05 – 866.85 🔹 **Stoploss:** 867.85 🔹 **Target 1:** 862.30 🎯 🔹 **Target 2:** 858.00 🎯 💡 **Key Insights:** ✅ **D-Point Reached** – Potential Reversal Zone 📉 ✅ If price breaks below **866.05** (Breaking Range), further downside expected ✅ **Bearish Outlook** towards **selling targets** 📌 **Disclaimer:** This analysis is for **educational purposes only** and not financial advice. Trade responsibly! 🚀
MCX:COPPER1!Short
by BUY_TODAY_Tamil
Copper sell on rise 844-841 downside Target sell on riseHow to take trades using Harmonic pattern projection Trade setup is explained below :- Entry : 1st D point : 0% is recent top or bottom. Trailing SL: 17.5% is work as trailing SL of buy or sell trade if hit then we have to book profit .If price goes below 17.5% then early or risky traders can reversal trade , Targets : Target T1 : 28.3% Target T1 : 37.8 % Target T3 : 48.1% T3: 60.2% to 66.9 % is our 3rd Target since this is reversal zone so must book profit if break then take fresh trade again Next Targets are 77.5 % , 88.1 % 100% , 113.5 % , 127.3% , 141.2% and 160.2 , 177.5. final Target 200% 160.2 to 177.5% if profit booking area so book full profit and wait for reversal. How to take reversal trade : If price going upside/ downside then then buy or sell levels appear on Chart ( Automatically show when price reach any reversal zone of harmonic projection pattern based . After showing reversal levels wait for confirmation until 17.5 % or 28.3 % level not break if break then exit from current buy / sell trade and take fresh reverse trade buy/ sell . Trailing SL: After reach 1st Target trail SL to just above or below cost ( for example we are holding sell trade from 100 1st Target 110 hit then move trailing sl to 104-105 and move SL as price move upside or Downside) Re- Entry : For Re-entry in any pull back Point D ( 9.3% ) is used for re-entry then SL recent high or low Point D ( 0% ) . Target is same as early 17.5 % , 28.3 , 37.8 and so on Blue Line is 1st support/ Resistance Green line is 2nd support/ resistance Red line is 3rd Support/ resistance
MCX:COPPER1!Short
by EquityCommodityForexJaiprakash
Copper sold at 875 , 863 Target hit 857,852 next Target How to take trades using Harmonic pattern projection Trade setup is explained below :- To take fresh trade in Buy/ Sell side we have to check if Price if Above / below 23.6 mentioned as D(23.6%) Then we can take fresh buy or sell trade with SL or recent high/ low mentioned as point D( 0 %). Targets : T1: 35 % to 38.2 % level is our 1st Target ( This is reversal zone so if price taking support and not break zone then book profit. If breaking then hold trade with SL just above or below cost) T2: 50% level is our 2nd Target T3: 61.8% to 65 % is our 3rd Target ( This is also reversal zone so we have to book profit at this area and if break then take fresh entry with SL of 2nd Target 50% .) Next Targets are 78.6 % , 88.9 % 100% , 113.5 % , 127.2% , 138.2% ,150% and 161.8% to 165%. 161.8 to 165% if profit booking area so book full profit and wait for reversal. How to take reversal trade : If price going upside/ downside then then buy or sell levels appear on Chart ( Automatically show when price reach any reversal zone of harmonic projection parlttern based . After showing reversal levels wait for confirmation until 23 .6 % level not break if break then exit from current buy / sell trade and take fresh reverse trade buy/ sell . Trailing SL: After reach 1st Target trail SL to just above or below cost ( for example we are holding sell trade from 100 1st Target 110 hit then move trailing sl to 104-105 and move SL as price move upside or Downside)
MCX:COPPER1!Short
by EquityCommodityForexJaiprakash
Copper bought at 856 booked at 868 , 12 points profit,buy on dipHow to take trades using Harmonic pattern projection Trade setup is explained below :- Entry : 1st D point : 0% is recent top or bottom. Trailing SL: 17.5% is work as trailing SL of buy or sell trade if hit then we have to book profit .If price goes below 17.5% then early or risky traders can reversal trade , Targets : Target T1 : 28.3% Target T1 : 37.8 % Target T3 : 48.1% T3: 60.2% to 66.9 % is our 3rd Target since this is reversal zone so must book profit if break then take fresh trade again Next Targets are 77.5 % , 88.1 % 100% , 113.5 % , 127.3% , 141.2% and 160.2 , 177.5. final Target 200% 160.2 to 177.5% if profit booking area so book full profit and wait for reversal. How to take reversal trade : If price going upside/ downside then then buy or sell levels appear on Chart ( Automatically show when price reach any reversal zone of harmonic projection pattern based . After showing reversal levels wait for confirmation until 17.5 % or 28.3 % level not break if break then exit from current buy / sell trade and take fresh reverse trade buy/ sell . Trailing SL: After reach 1st Target trail SL to just above or below cost ( for example we are holding sell trade from 100 1st Target 110 hit then move trailing sl to 104-105 and move SL as price move upside or Downside) Re- Entry : For Re-entry in any pull back Point D ( 9.3% ) is used for re-entry then SL recent high or low Point D ( 0% ) . Target is same as early 17.5 % , 28.3 , 37.8 and so on Blue Line is 1st support/ Resistance Green line is 2nd support/ resistance Red line is 3rd Support/ resistance
MCX:COPPER1!Long
by EquityCommodityForexJaiprakash
Copper sold at 861 booked at 851 now holding buy 853 , 866 TargtHow to take trades using Harmonic pattern projection Trade setup is explained below :- 1st D point : 0% is recent top or bottom. Trailing SL: 17.5% is work as trailing SL of buy or sell trade if hit then we have to book profit .If price goes below 17.5% then early or risky traders can reversal trade , Targets : Target T1 : 28.3% Target T1 : 37.8 % Target T3 : 48.1% T3: 60.2% to 66.9 % is our 3rd Target since this is reversal zone so must book profit if break then take fresh trade again Next Targets are 77.5 % , 88.1 % 100% , 113.5 % , 127.3% , 141.2% and 160.2 , 177.5. final Target 200% 160.2 to 177.5% if profit booking area so book full profit and wait for reversal. How to take reversal trade : If price going upside/ downside then then buy or sell levels appear on Chart ( Automatically show when price reach any reversal zone of harmonic projection pattern based . After showing reversal levels wait for confirmation until 17.5 % or 28.3 % level not break if break then exit from current buy / sell trade and take fresh reverse trade buy/ sell . Trailing SL: After reach 1st Target trail SL to just above or below cost ( for example we are holding sell trade from 100 1st Target 110 hit then move trailing sl to 104-105 and move SL as price move upside or Downside) Blue Line is 1st support/ Resistance Green line is 2nd support/ resistance Red line is 3rd Support/ resistance
MCX:COPPER1!Long
by EquityCommodityForexJaiprakash
Copper jf break 872 then upmove will come buy on dipHow to take trades using Harmonic pattern projection Trade setup is explained below :- Entry : 1st D point : 0% is recent top or bottom. Trailing SL: 20.2% is work as trailing SL of buy or sell trade if hit then we have to book profit .If price goes below 20.2% then early or risky traders can reversal trade , Targets : Target T1 : 28.3% Target T1 : 37.8 % Target T3 : 48.1% T3: 60.2% to 66.9 % is our 3rd Target since this is reversal zone so must book profit if break then take fresh trade again Next Targets are 77.5 % , 88.1 % 100% , 113.5 % , 127.3% , 141.2% and 160.2 , 177.5. final Target 200% 160.2 to 177.5% if profit booking area so book full profit and wait for reversal. How to take reversal trade : If price going upside/ downside then then buy or sell levels appear on Chart ( Automatically show when price reach any reversal zone of harmonic projection pattern based . After showing reversal levels wait for confirmation until 20.2 % or 28.3 % level not break if break then exit from current buy / sell trade and take fresh reverse trade buy/ sell . Trailing SL: After reach 1st Target trail SL to just above or below cost ( for example we are holding sell trade from 100 1st Target 110 hit then move trailing sl to 104-105 and move SL as price move upside or Downside) Re- Entry : For Re-entry in any pull back Point D ( 10.1% ) is used for re-entry then SL recent high or low Point D ( 0% ) . Target is same as early 20.2% , 28.3 , 37.8 and so on Blue Line is 1st support/ Resistance Green line is 2nd support/ resistance Red line is 3rd Support/ resistance
MCX:COPPER1!Long
by EquityCommodityForexJaiprakash
Copper updated levels, upmove will continue avoid any sell tradeHow to take trades using Harmonic pattern projection Trade setup is explained below :- Entry : 1st D point : 0% is recent top or bottom. Trailing SL: 20.2% is work as trailing SL of buy or sell trade if hit then we have to book profit .If price goes below 20.2% then early or risky traders can reversal trade , Targets : Target T1 : 28.3% Target T1 : 37.8 % Target T3 : 48.1% T3: 60.2% to 66.9 % is our 3rd Target since this is reversal zone so must book profit if break then take fresh trade again Next Targets are 77.5 % , 88.1 % 100% , 113.5 % , 127.3% , 141.2% and 160.2 , 177.5. final Target 200% 160.2 to 177.5% if profit booking area so book full profit and wait for reversal. How to take reversal trade : If price going upside/ downside then then buy or sell levels appear on Chart ( Automatically show when price reach any reversal zone of harmonic projection pattern based . After showing reversal levels wait for confirmation until 20.2 % or 28.3 % level not break if break then exit from current buy / sell trade and take fresh reverse trade buy/ sell . Trailing SL: After reach 1st Target trail SL to just above or below cost ( for example we are holding sell trade from 100 1st Target 110 hit then move trailing sl to 104-105 and move SL as price move upside or Downside) Re- Entry : For Re-entry in any pull back Point D ( 10.1% ) is used for re-entry then SL recent high or low Point D ( 0% ) . Target is same as early 20.2% , 28.3 , 37.8 and so on Blue Line is 1st support/ Resistance Green line is 2nd support/ resistance Red line is 3rd Support/ resistance
MCX:COPPER1!Long
by EquityCommodityForexJaiprakash
Copper sell holding from 874 ,target 858,854 ,845-842 How to take trades using Harmonic pattern projection Trade setup is explained below :- Entry : 1st D point : 0% is recent top or bottom. Trailing SL: 20.2% is work as trailing SL of buy or sell trade if hit then we have to book profit .If price goes below 20.2% then early or risky traders can reversal trade , Targets : Target T1 : 28.3% Target T1 : 37.8 % Target T3 : 48.1% T3: 60.2% to 66.9 % is our 3rd Target since this is reversal zone so must book profit if break then take fresh trade again Next Targets are 77.5 % , 88.1 % 100% , 113.5 % , 127.3% , 141.2% and 160.2 , 177.5. final Target 200% 160.2 to 177.5% if profit booking area so book full profit and wait for reversal. How to take reversal trade : If price going upside/ downside then then buy or sell levels appear on Chart ( Automatically show when price reach any reversal zone of harmonic projection pattern based . After showing reversal levels wait for confirmation until 20.2 % or 28.3 % level not break if break then exit from current buy / sell trade and take fresh reverse trade buy/ sell . Trailing SL: After reach 1st Target trail SL to just above or below cost ( for example we are holding sell trade from 100 1st Target 110 hit then move trailing sl to 104-105 and move SL as price move upside or Downside) Re- Entry : For Re-entry in any pull back Point D ( 10.1% ) is used for re-entry then SL recent high or low Point D ( 0% ) . Target is same as early 20.2% , 28.3 , 37.8 and so on Blue Line is 1st support/ Resistance Green line is 2nd support/ resistance Red line is 3rd Support/ resistance
MCX:COPPER1!
by EquityCommodityForexJaiprakash
Copper sold at 861 ,851 Target hit sell on rise How to take trades using Harmonic pattern projection Trade setup is explained below :- 1st D point : 0% is recent top or bottom. Trailing SL: 17.5% is work as trailing SL of buy or sell trade if hit then we have to book profit .If price goes below 17.5% then early or risky traders can reversal trade , Targets : Target T1 : 28.3% Target T1 : 37.8 % Target T3 : 48.1% T3: 60.2% to 66.9 % is our 3rd Target since this is reversal zone so must book profit if break then take fresh trade again Next Targets are 77.5 % , 89.6 % 100% , 113.5 % , 127.3% , 141.2% and 160.2 , 177.5. final Target 200% 160.2 to 177.5% if profit booking area so book full profit and wait for reversal. How to take reversal trade : If price going upside/ downside then then buy or sell levels appear on Chart ( Automatically show when price reach any reversal zone of harmonic projection pattern based . After showing reversal levels wait for confirmation until 17.5 % or 28.3 % level not break if break then exit from current buy / sell trade and take fresh reverse trade buy/ sell . Trailing SL: After reach 1st Target trail SL to just above or below cost ( for example we are holding sell trade from 100 1st Target 110 hit then move trailing sl to 104-105 and move SL as price move upside or Downside) Blue Line is 1st support/ Resistance Green line is 2nd support/ resistance Red line is 3rd Support/ resistance
MCX:COPPER1!
by EquityCommodityForexJaiprakash
Copper last week premium members booked 28 points profit How to take trades using Harmonic pattern projection Trade setup is explained below :- 1st D point : 0% is recent top or bottom. 2nd D Point : 13.5% is work as trailing SL of buy or sell trade if hit then we have to book profit .If price goes below 13.5% then early or risky traders can reversal trade , Safe traders can wait for 27% levels break Targets : Target T1 is 27.3% if you are taken entry from 13.5% if taken entry from 27.3 then Target T1: 38.2 % level is our 1st Target ( 38.2% if also a reversal zone so if price reverse then we can make fresh entry also). T2: 50% level is our 2nd Target T3: 61.8% to 65 % is our 3rd Target ( This is also reversal zone so we have to book profit at this area and if break then take fresh entry with SL of 2nd Target 50% .) Next Targets are 78.6 % , 88.9 % 100% , 113.5 % , 127.2% , 141.5% and 161.8% to 165%. 161.8 to 165% if profit booking area so book full profit and wait for reversal. How to take reversal trade : If price going upside/ downside then then buy or sell levels appear on Chart ( Automatically show when price reach any reversal zone of harmonic projection pattern based . After showing reversal levels wait for confirmation until 13.5 % or 27 .6 % level not break if break then exit from current buy / sell trade and take fresh reverse trade buy/ sell . Trailing SL: After reach 1st Target trail SL to just above or below cost ( for example we are holding sell trade from 100 1st Target 110 hit then move trailing sl to 104-105 and move SL as price move upside or Downside) Blue Line is 1st support/ Resistance Green line is 2nd support/ resistance Red line is 3rd Support/ resistance
MCX:COPPER1!
by EquityCommodityForexJaiprakash
Copper updated levels, looking weak avoid fresh buy Copper book profit at 853 , since gold and silver recovered so copper may also recover book 2 points profit How to take trades using Harmonic pattern projection Trade setup is explained below :- 1st D point : 0% is recent top or bottom. 2nd D Point : 13.5% is work as trailing SL of buy or sell trade if hit then we have to book profit .If price goes below 13.5% then early or risky traders can reversal trade , Safe traders can wait for 27% levels break Targets : Target T1 is 27.3% if you are taken entry from 13.5% if taken entry from 27.3 then Target T1: 38.2 % level is our 1st Target ( 38.2% if also a reversal zone so if price reverse then we can make fresh entry also). T2: 50% level is our 2nd Target T3: 61.8% to 65 % is our 3rd Target ( This is also reversal zone so we have to book profit at this area and if break then take fresh entry with SL of 2nd Target 50% .) Next Targets are 78.6 % , 88.9 % 100% , 113.5 % , 127.2% , 141.5% and 161.8% to 165%. 161.8 to 165% if profit booking area so book full profit and wait for reversal. How to take reversal trade : If price going upside/ downside then then buy or sell levels appear on Chart ( Automatically show when price reach any reversal zone of harmonic projection pattern based . After showing reversal levels wait for confirmation until 13.5 % or 27 .6 % level not break if break then exit from current buy / sell trade and take fresh reverse trade buy/ sell . Trailing SL: After reach 1st Target trail SL to just above or below cost ( for example we are holding sell trade from 100 1st Target 110 hit then move trailing sl to 104-105 and move SL as price move upside or Downside) Blue Line is 1st support/ Resistance Green line is 2nd support/ resistance Red line is 3rd Support/ resistance
MCX:COPPER1!
by EquityCommodityForexJaiprakash
Copper buy given at 827 , 21 points up , avoid fresh buy at cmpHow to take trades using Harmonic pattern projection Trade setup is explained below :- 1st D point : 0% is recent top or bottom. 2nd D Point : 13.5% is work as trailing SL of buy or sell trade if hit then we have to book profit .If price goes below 13.5% then early or risky traders can reversal trade , Safe traders can wait for 27% levels break Targets : Target T1 is 27.3% if you are taken entry from 13.5% if taken entry from 27.3 then Target T1: 38.2 % level is our 1st Target ( 38.2% if also a reversal zone so if price reverse then we can make fresh entry also). T2: 50% level is our 2nd Target T3: 61.8% to 65 % is our 3rd Target ( This is also reversal zone so we have to book profit at this area and if break then take fresh entry with SL of 2nd Target 50% .) Next Targets are 78.6 % , 88.9 % 100% , 113.5 % , 127.2% , 141.5% and 161.8% to 165%. 161.8 to 165% if profit booking area so book full profit and wait for reversal. How to take reversal trade : If price going upside/ downside then then buy or sell levels appear on Chart ( Automatically show when price reach any reversal zone of harmonic projection pattern based . After showing reversal levels wait for confirmation until 13.5 % or 27 .6 % level not break if break then exit from current buy / sell trade and take fresh reverse trade buy/ sell . Trailing SL: After reach 1st Target trail SL to just above or below cost ( for example we are holding sell trade from 100 1st Target 110 hit then move trailing sl to 104-105 and move SL as price move upside or Downside) Blue Line is 1st support/ Resistance Green line is 2nd support/ resistance Red line is 3rd Support/ resistance
MCX:COPPER1!
by EquityCommodityForexJaiprakash
Copper buy given at 827 , 14 points profit running How to take trades using Harmonic pattern projection Trade setup is explained below :- 1st D point : 0% is recent top or bottom. 2nd D Point : 13.5% is work as trailing SL of buy or sell trade if hit then we have to book profit .If price goes below 13.5% then early or risky traders can reversal trade , Safe traders can wait for 27% levels break Targets : Target T1 is 27.3% if you are taken entry from 13.5% if taken entry from 27.3 then Target T1: 38.2 % level is our 1st Target ( 38.2% if also a reversal zone so if price reverse then we can make fresh entry also). T2: 50% level is our 2nd Target T3: 61.8% to 65 % is our 3rd Target ( This is also reversal zone so we have to book profit at this area and if break then take fresh entry with SL of 2nd Target 50% .) Next Targets are 78.6 % , 88.9 % 100% , 113.5 % , 127.2% , 141.5% and 161.8% to 165%. 161.8 to 165% if profit booking area so book full profit and wait for reversal. How to take reversal trade : If price going upside/ downside then then buy or sell levels appear on Chart ( Automatically show when price reach any reversal zone of harmonic projection pattern based . After showing reversal levels wait for confirmation until 13.5 % or 27 .6 % level not break if break then exit from current buy / sell trade and take fresh reverse trade buy/ sell . Trailing SL: After reach 1st Target trail SL to just above or below cost ( for example we are holding sell trade from 100 1st Target 110 hit then move trailing sl to 104-105 and move SL as price move upside or Downside) Blue Line is 1st support/ Resistance Green line is 2nd support/ resistance Red line is 3rd Support/ resistance
MCX:COPPER1!
by EquityCommodityForexJaiprakash
Copper 821 Target hit sold from 833 ,buy holding buy @827How to take trades using Harmonic pattern projection Trade setup is explained below :- 1st D point : 0% is recent top or bottom. 2nd D Point : 13.5% is work as trailing SL of buy or sell trade if hit then we have to book profit .If price goes below 13.5% then early or risky traders can reversal trade , Safe traders can wait for 27% levels break Targets : Target T1 is 27.3% if you are taken entry from 13.5% if taken entry from 27.3 then Target T1: 38.2 % level is our 1st Target ( 38.2% if also a reversal zone so if price reverse then we can make fresh entry also). T2: 50% level is our 2nd Target T3: 61.8% to 65 % is our 3rd Target ( This is also reversal zone so we have to book profit at this area and if break then take fresh entry with SL of 2nd Target 50% .) Next Targets are 78.6 % , 88.9 % 100% , 113.5 % , 127.2% , 141.5% and 161.8% to 165%. 161.8 to 165% if profit booking area so book full profit and wait for reversal. How to take reversal trade : If price going upside/ downside then then buy or sell levels appear on Chart ( Automatically show when price reach any reversal zone of harmonic projection pattern based . After showing reversal levels wait for confirmation until 13.5 % or 27 .6 % level not break if break then exit from current buy / sell trade and take fresh reverse trade buy/ sell . Trailing SL: After reach 1st Target trail SL to just above or below cost ( for example we are holding sell trade from 100 1st Target 110 hit then move trailing sl to 104-105 and move SL as price move upside or Downside) Blue Line is 1st support/ Resistance Green line is 2nd support/ resistance Red line is 3rd Support/ resistance
MCX:COPPER1!Long
by EquityCommodityForexJaiprakash
1
Us tarrif imposed negative for copper sell ris 824-820,816 targtHow to take trades using Harmonic pattern projection Trade setup is explained below :- 1st D point : 0% is recent top or bottom. 2nd D Point : 13.5% is work as trailing SL of buy or sell trade if hit then we have to book profit .If price goes below 13.5% then early or risky traders can reversal trade , Safe traders can wait for 27% levels break Targets : Target T1 is 27.3% if you are taken entry from 13.5% if taken entry from 27.3 then Target T1: 38.2 % level is our 1st Target ( 38.2% if also a reversal zone so if price reverse then we can make fresh entry also). T2: 50% level is our 2nd Target T3: 61.8% to 65 % is our 3rd Target ( This is also reversal zone so we have to book profit at this area and if break then take fresh entry with SL of 2nd Target 50% .) Next Targets are 78.6 % , 88.9 % 100% , 113.5 % , 127.2% , 141.5% and 161.8% to 165%. 161.8 to 165% if profit booking area so book full profit and wait for reversal. How to take reversal trade : If price going upside/ downside then then buy or sell levels appear on Chart ( Automatically show when price reach any reversal zone of harmonic projection pattern based . After showing reversal levels wait for confirmation until 13.5 % or 27 .6 % level not break if break then exit from current buy / sell trade and take fresh reverse trade buy/ sell . Trailing SL: After reach 1st Target trail SL to just above or below cost ( for example we are holding sell trade from 100 1st Target 110 hit then move trailing sl to 104-105 and move SL as price move upside or Downside) Blue Line is 1st support/ Resistance Green line is 2nd support/ resistance Red line is 3rd Support/ resistance
MCX:COPPER1!
by EquityCommodityForexJaiprakash
1
Copper pattern negative sell on rise 822 1st Target How to take trades using Harmonic pattern projection Trade setup is explained below :- To take Fresh trade : EARLY etry willl be above/ below 13.5% level . Safe traders can enter above or below 27.3% level Targets : Target T1 is 27.3% if you are taken entry from 13.5% if taken entry from 27.3 then Target T1: 38.2 % level is our 1st Target ( 38.2% if also a reversal zone so if price reverse then we can make fresh entry also). T2: 50% level is our 2nd Target T3: 61.8% to 65 % is our 3rd Target ( This is also reversal zone so we have to book profit at this area and if break then take fresh entry with SL of 2nd Target 50% .) Next Targets are 78.6 % , 88.9 % 100% , 113.5 % , 127.2% , 141.5% and 161.8% to 165%. 161.8 to 165% if profit booking area so book full profit and wait for reversal. How to take reversal trade : If price going upside/ downside then then buy or sell levels appear on Chart ( Automatically show when price reach any reversal zone of harmonic projection pattern based . After showing reversal levels wait for confirmation until 13.5 % or 27 .6 % level not break if break then exit from current buy / sell trade and take fresh reverse trade buy/ sell . Trailing SL: After reach 1st Target trail SL to just above or below cost ( for example we are holding sell trade from 100 1st Target 110 hit then move trailing sl to 104-105 and move SL as price move upside or Downside) Blue Line is 1st support/ Resistance Green line is 2nd support/ resistance Red line is 3rd Support/ resistance
MCX:COPPER1!Short
by EquityCommodityForexJaiprakash
Copper avoid any buy trade sell on rise How to take trades using Harmonic pattern projection Trade setup is explained below :- To take Fresh trade : EARLY etry willl be above/ below 13.5% level . Safe traders can enter above or below 27.3% level Targets : Target T1 is 27.3% if you are taken entry from 13.5% if taken entry from 27.3 then Target T1: 38.2 % level is our 1st Target ( 38.2% if also a reversal zone so if price reverse then we can make fresh entry also). T2: 50% level is our 2nd Target T3: 61.8% to 65 % is our 3rd Target ( This is also reversal zone so we have to book profit at this area and if break then take fresh entry with SL of 2nd Target 50% .) Next Targets are 78.6 % , 88.9 % 100% , 113.5 % , 127.2% , 141.5% and 161.8% to 165%. 161.8 to 165% if profit booking area so book full profit and wait for reversal. How to take reversal trade : If price going upside/ downside then then buy or sell levels appear on Chart ( Automatically show when price reach any reversal zone of harmonic projection pattern based . After showing reversal levels wait for confirmation until 13.5 % or 27 .6 % level not break if break then exit from current buy / sell trade and take fresh reverse trade buy/ sell . Trailing SL: After reach 1st Target trail SL to just above or below cost ( for example we are holding sell trade from 100 1st Target 110 hit then move trailing sl to 104-105 and move SL as price move upside or Downside) Blue Line is 1st support/ Resistance Green line is 2nd support/ resistance Red line is 3rd Support/ resistance
MCX:COPPER1!
by EquityCommodityForexJaiprakash