Get started

Moving Averages

Breakout Range Signal with Quality Analysis [Dova Lazarus]📌 Breakout Range Signal with Quality Analysis 🎓 Training-focused indicator for breakout logic, SL & TP behavior and signal quality assessment 🔷 PURPOSE This tool identifies breakout candles from a calculated channel range and visually simulates entries, stop losses, and take profits, providing live and historical performance metrics. ⚙️ MAIN SETTINGS 1️⃣ Channel Setup channel_length = 10 → how many candles are averaged to form channel boundaries channel_multiplier = 0.0 → adds expansion above/below the base channel channel_smoothing_type = SMA → smoothing method for high/low averaging 📊 The channel consists of two moving averages: one from highs, the other from lows. When expanded (via multiplier), it creates a buffer range for breakout validation. 2️⃣ Signal Detection Body > Channel % = 50 → a breakout candle's body must exceed 150% of the channel width Signal Mode:  • Weak → every valid breakout candle is highlighted  • Strong → only the first signal in a sequence is shown (helps reduce noise) 🟦 Bullish signals (blue):  • Candle opens inside the channel  • Closes above the channel  • Body is large enough  • Optional: confirms with trend (if enabled) 🟨 Bearish signals (yellow):  • Candle opens inside the channel  • Closes below the channel  • Body is large enough  • Optional: confirms with trend 3️⃣ Trend Filter (optional) Enabled via checkbox Uses a higher timeframe MA to filter signals Bullish signals are allowed only if price is below the trend MA Bearish signals only if price is above it ⏱️ trend_timeframe = 1D (typically set higher than the chart's timeframe) 🟢 Trend line is plotted if enabled 🎯 ENTRY, STOP LOSS & TAKE PROFIT LOGIC SL and TP are based on channel width, not fixed pip/tick size: 📍 Entry Price = close of the breakout candle 🛑 Stop Loss:  • Bullish → below the lower channel border (minus offset)  • Bearish → above the upper channel border (plus offset) 🎯 Take Profit:  • Bullish → entry + channel width × profit multiplier  • Bearish → entry − channel width × profit multiplier You can control: Profit Target Multiplier (e.g., 1.0 → TP = 1×channel width) Stop Loss Target Multiplier (e.g., 0.5 → SL = 0.5×channel width) Signals to Show = how many historical SL/TP setups to display 📈 Lines and labels ("TP", "SL") are drawn on the chart for clarity. 🧪 QUALITY ANALYSIS MODULE If enabled, the indicator will: Track each new signal (entry, SL, TP) Analyze outcomes:  • Win = TP hit before SL  • Loss = SL hit before TP  • Expired = signal unresolved after N bars Display statistics in a table (top-right corner): 📋 Table fields: ✅ Overall win rate 📈 Bullish win rate 📉 Bearish win rate 🔢 Total signals 🕓 Pending (still active trades) Maximum bars to wait for outcome is customizable (max_bars_to_analyze). 📐 VISUALIZATION TOOLS TP / SL lines per signal Labels “TP” and “SL” Optional channel lines and trendline for better context Colored bars for valid signals (blue/yellow) 📌 BEST USE CASES Understand how breakout signals are formed Learn SL/TP logic based on dynamic range Test how volatility affects trade outcomes Use as a visual simulation of trade behavior over time
Pine Script® indicator
by DovaLazarus
EMA+ATR Band MTF Trend EntryThis is a Multi-Timeframe Trend Trading indicator strategy adapted from Sahil Rohmehtra’s Mentorship programme. The trading decision is made by first accessing the trend in higher timeframe (say Monthly) by using TWO EMAs. If the faster EMA (say 20 period) is above Slower EMA (say 50 period) and the price is above slower EMA then the trend is suitable for buyers. Similarly if faster EMA is below slow EMA and the price is below that then trend is suitable for sellers. Once we access the trend in the higher timeframe we move to the lower timeframe (say Weekly) and access the 5-period RSI value. If RSI is below 30 then we can prepare for possible buy entry in lower (Daily) timeframe if entry conditions are met in daily timeframe. Similarly sell bias can be initiated when the higher timeframe EMA trend is down, daily RSI is above 70 and sell entry condition is met in daily timeframe. The RSI thresholds can be changed by the user. Once we identified the RSI bias then wait for the confirmation candle in the lower timeframe (say 1 hour). In the entry timeframe we plot a band of 20 EMA of LOWs ± 1 ATR lines. Here,we wait for a candle to close above the 20 EMA of LOWs + 1 ATR for a buy signal with an increase in On Balance Volume (OBV) value. Similarly for sell signal we should get a candle close below the 20 EMA of LOWs - 1 ATR with corresponding change in OBV. This candle is the signal candle. Once we get a Buy or Sell signal the corresponding stop loss is the nearest LOW - 1 ATR or HIGH + 1 ATR. The ATR scaling may be changed by the user. Now if another candle closes above the high of the buy signal candle then enter on buy. If the low of the buy signal candle is broken then it is a potential short-term sell entry. Similarly if another candle closes below the sell signal candle then enter short and if there is a close above high of the signal candle then it is a potential buy entry.
Pine Script® indicator
by librantrader
Pi Cycle | AlchimistOfCryptoPi Cycle Top Indicator - A Powerful Market Phase Detector Developed by AlchimistOfCrypto 🧪 The Pi Cycle uses mathematical harmony to identify Bitcoin market cycle tops with remarkable precision. Just as elements react at specific temperatures, Bitcoin price behaves predictably when these two moving averages converge! 🧬 ⚗️ The formula measures when the 111-day SMA crosses below the 350-day SMA × 2, creating a perfect alchemical reaction that has successfully identified the major cycle tops in 2013, 2017, and 2021. 🔬 Like the Golden Ratio in nature, this indicator reveals the hidden mathematical structure within Bitcoin's chaotic price movements. 🧮 When the reaction occurs, prepare for molecular breakdown! 🔥
Pine Script® indicator
by AlchimistOfCrypto
3
Keltner Channels MTFKeltner Channels MTF | Adapted 🌌 Navigate the market’s wild waves with these Keltner Channels, a sleek spin on AlchimistOfCrypto’s Bollinger Bands! This Pine Script v6 indicator tracks price action like a radar, highlighting trends with scientific precision. 🧪 Key Features: Customizable Channels: Adjust period and multiplier to map market volatility, signaling potential reversals when prices hit the upper or lower bands. 📈 MA Options: Switch between Exponential or Simple Moving Average for trend clarity. ⚙️ Band Styles: Select Average True Range, True Range, or Range to define volatility edges. 📏 Glow Effect: Illuminate bands with 8 vibrant themes (Neon, Grayscale, etc.) for visual pop. ✨ Trend Signals: Spot bullish/bearish shifts with glowing circles, flagging momentum changes. 💡 Alerts: Catch price breakouts or trend reversals at band edges, warning of potential market U-turns. 🚨 Perfect for traders decoding market trends with a touch of cosmic style! 🌠
Pine Script® indicator
by AlchimistOfCrypto
SMAs Ghost in the Machine v3SMAs Ghost in the Machine v3 Created by: MecarderoAurum Overview The "SMAs Ghost in the Machine" is a powerful multi-timeframe analysis tool designed for traders who want to align their entries and exits with the trend on several different chart periods simultaneously. At its core, the indicator plots the 9-period and 20-period Simple Moving Averages (SMAs) from up to three user-defined timeframes directly onto your active chart. Its most powerful feature is the Combined Crossover Signal, which allows you to create highly specific, custom trading setups by defining conditions that must occur at the same time across any of the enabled timeframes. This eliminates guesswork and helps you visually confirm when your precise market conditions are met. Important Note on Line Drawing This indicator allows you to see trends of other timeframes. A specific design choice was made not to smooth the moving average lines. This is to ensure that the crossover signals appear on the exact candle where the cross occurs in real-time. Smoothing the lines can cause a delay and shift the signal to a later candle. The side effect of this accuracy is that the lines will appear "stepped." As new data comes in on your current chart, you may need to refresh the chart to keep the higher timeframe lines updated. We are working on a solution to this. Capabilities Multi-Timeframe Analysis: Plot the 9 and 20 SMAs from three different timeframes (e.g., 1-minute, 5-minute, and 30-minute) on a single chart. Individual Crossover Signals: Automatically plots a green triangle (▲) for a "Golden Cross" (9 SMA crosses above 20) and a red triangle (▼) for a "Death Cross" (9 SMA crosses below 20) on each individual timeframe. Combined Crossover Engine: Define a custom bullish or bearish signal by combining multiple events. The indicator will plot a green diamond (◆) for your bullish setup and a red diamond (◆) for your bearish setup when all specified conditions are met on the same candle. Customizable Alerts: Create alerts for both the individual 9/20 SMA crosses and your custom Combined Crossover Signal to ensure you never miss a potential setup. How to Use the Indicator Basic Setup Add the "SMAs Ghost in the Machine v3" indicator to your TradingView chart. Open the indicator settings. Under the Timeframe Settings, enable the timeframes you want to monitor and select the desired period for each (e.g., TF1: '1', TF2: '5', TF3: '30'). Configuring the Combined Crossover Signal This is the core feature for defining your specific trading setups. In the settings, go to the "Combined Crossover Signal" group and check the box to "Enable Combined Signal." Decide if you are building a bullish (long) or bearish (short) setup. Under the "Bullish Setup" or "Bearish Setup" sections, check the boxes for every event that must happen at the same time for your signal to trigger. Example Bullish Setup: Let's say your strategy is to go long when: On the 1-minute chart (TF1), the price crosses above the 9 SMA. AND, on the 5-minute chart (TF3), the price also crosses above its 9 SMA. To configure this, you would check the following two boxes under the "Bullish Setup": TF1: Price crosses above 9 SMA TF3: Price crosses above 9 SMA Now, a green diamond (◆) will only appear on your chart when both of those conditions are true on the exact same bar, giving you a precise entry signal. Setting Up Alerts Go to the "Alert Settings" tab in the indicator options. Check the boxes for the alerts you want to enable (e.g., "Alert on TF1 SMA Cross," "Alert on Combined Signal"). Close the settings. Now, right-click on the chart and choose "Add alert." In the "Condition" dropdown, select "SMA Ghosts v3." A second dropdown will appear. Choose the specific event you want an alert for, such as Combined Bullish Signal or TF1 Golden Cross. Configure the alert options as desired and click "Create." Trading Strategies Trend Confirmation: Use the indicator on a 1-minute chart with the 5-minute 9/20 SMA lines enabled to see the 5-minute trend. Only take 1-minute trades that are in the same direction as the 5-minute SMAs. Multi-Flow Alignment: Keep track of bigger timeframes (like the 30-min or 4-hour) to also match your entries with longer-term market flows. Avoid Flat Markets: Avoid taking trades when the SMA lines from multiple timeframes are flat or moving sideways, as this indicates a lack of clear trend.
Pine Script® indicator
by MercaderoAurum
1
Stochastic Ribbon & EMAsHere's a comprehensive description for publishing your indicator: --- # **Stochastic Ribbon & EMAs** A clean and powerful trading indicator that combines **Stochastic Support/Resistance levels** with **Essential Moving Averages** for comprehensive market analysis. ## **📊 What It Does** This indicator provides **7 key reference lines** on your chart: - **3 Stochastic levels** (20%, 50%, 80%) - Dynamic support/resistance zones - **4 Essential EMAs** (20, 50, 100, 200) - Trend direction and momentum ## **🎯 Key Features** ### **Stochastic Ribbon (3 Yellow Lines)** - **80% Line**: Dynamic resistance level - potential selling zone - **50% Line**: Market equilibrium - trend direction reference - **20% Line**: Dynamic support level - potential buying zone - **Default 50-period lookback** for stable, reliable levels - **All lines in yellow** for clean, consistent visualization ### **Essential EMAs (4 Colored Lines)** - **20 EMA** (Purple): Short-term trend and entry timing - **50 EMA** (Dark Cyan): Medium-term trend direction - **100 EMA** (Rosy Brown): Long-term trend confirmation - **200 EMA** (Brown): Major trend and institutional levels ## **📈 How to Use** ### **For Support & Resistance:** - **Above 80% line**: Look for selling opportunities (overbought zone) - **Between 50-80%**: Bullish bias, pullbacks to 50% line for entries - **Around 50% line**: Key equilibrium - watch for direction - **Between 20-50%**: Bearish bias, bounces to 50% line for exits - **Below 20% line**: Look for buying opportunities (oversold zone) ### **For Trend Analysis:** - **EMA Stack Order**: Higher timeframe EMAs above lower = uptrend - **Price above all EMAs**: Strong bullish momentum - **Price below all EMAs**: Strong bearish momentum - **EMA as dynamic support/resistance**: Bounces and rejections ### **For Entry Signals:** - **Confluence zones**: Where Stochastic levels meet EMA levels - **Breakouts**: Price breaking through multiple levels simultaneously - **Reversals**: Price rejection at extreme Stochastic levels with EMA confirmation ## **⚙️ Settings** ### **Stochastic Ribbon** - **Show/Hide**: Toggle the 3 Stochastic lines - **Length**: Period for high/low calculation (default: 50) - **Start**: Multiplier for calculation (default: 1) ### **EMAs** - **Individual toggles**: Show/hide each EMA separately - **Custom periods**: Adjust each EMA length (defaults: 20, 50, 100, 200) - **Custom colors**: Personalize each EMA color ## **🚀 Why This Indicator?** ✅ **Clean & Simple**: No cluttered charts - just essential levels ✅ **Multi-Timeframe**: Works on all timeframes from 1m to 1W ✅ **Versatile**: Suitable for scalping, day trading, and swing trading ✅ **Low Lag**: Dynamic levels that adapt to current market conditions ✅ **Proven Components**: Combines two well-established technical concepts ✅ **Customizable**: Adjust all parameters to fit your trading style ## **💡 Pro Tips** - **Use multiple timeframes**: Check higher timeframe alignment for stronger signals - **Combine with volume**: Look for volume confirmation at key levels - **Watch for confluences**: Best signals occur where multiple levels align - **Respect the 50% line**: Often acts as the most important level for trend direction ## **📋 Technical Details** - **Version**: Pine Script v5 - **Overlay**: Yes (displays on main price chart) - **Plots**: 7 total (well within Pine Script limits) - **Performance**: Optimized for fast loading and smooth operation --- **Perfect for traders who want clear, actionable levels without chart clutter. Whether you're a beginner learning support/resistance or an experienced trader looking for clean reference points, this indicator delivers exactly what you need.**
Pine Script® indicator
by insomniac_vampire
Advanced Swing Breakout + RSI + EMA + Smart Volume SpikeThis indicator is designed to identify high-probability swing trade setups using a confluence of: Swing High/Low Breakouts RSI Trend Strength EMA Directional Bias Smart Volume Spike Confirmation It combines key price action levels with volume and momentum filters to generate clean, actionable breakout alerts. It’s perfect for both intraday and swing traders looking to trade breakouts with confirmation from multiple technical layers. ⚙️ How It Works: ✅ Swing Detection: Plots Swing Highs and Swing Lows based on the past N candles. Highlights breakouts above highs or breakdowns below lows. 💪 RSI Filter: Confirms whether the breakout is supported by RSI momentum. Bullish breakout requires RSI > 50 and price above EMA. Bearish breakdown requires RSI < 50 and price below EMA. 📈 EMA Trend Bias: EMA (default 20-period) shows directional bias. Used as a filter to confirm trade direction. 🔊 Smart Volume Spike: Detects significant volume spikes above a moving average threshold. Color-coded bars show whether volume is bullish, bearish, or neutral. Ensures breakout is not on weak or average volume. 🚨 Alerts Included: ✅ Break Above Swing High: Only triggers when RSI, EMA, and Volume all confirm the move. ⚠️ Break Below Swing Low: Triggered only when bearish conditions are met. 📊 Visual Output: Swing Highs: 🔴 Red Dots Swing Lows: 🟢 Green Dots EMA Line: 🟠 Orange Line Volume Spike Bars: Appears in separate pane with dynamic color logic. 🧠 Best Use Cases: Intraday Scalping (5m–15m timeframes) Swing Trading (1H–4H) Breakout Confirmation Volume-Supported Entry Filtering
Pine Script® indicator
by michaelvalerio0511
Elliott Wave Probability System Pro v2🎯 Major Improvements Made to Elliott Wave Script Key Changes: 1. Advanced Trend Detection (Lines 55-82) Uses 5 different methods to determine trend over last 75 bars: Price position in range Linear regression slope Moving average alignment Higher highs/lows pattern Up vs down bar count Combines all methods into a trendScore for accurate direction 2. Adaptive Target Direction New input: adaptiveTargets (line 28) - can toggle on/off When ON: Targets follow the 75-bar trend regardless of short-term indicators When OFF: Works like original (based on current momentum) 3. Improved Target Calculation Bullish targets use extensions from current price to recent high Bearish targets use retracements from current price to recent low More realistic price levels based on actual market structure 4. Enhanced Status Display Added "Trend (75 bars)" row showing BULLISH/BEARISH/NEUTRAL Helps you see why targets are pointing a certain direction 5. Better Probability Calculation Base probability adjusts with trend strength (70% if strong trend, 50% if not) Gradual probability decay with distance Minimum 15% probability (more realistic than 10%) New Features: Trend-Based Alerts Alerts when 75-bar trend changes from bullish to bearish (or vice versa) Trend Weight in Scoring Added trendWeight to the total score calculation Makes signals more aligned with larger trend Visual Improvements Projection lines now show at 40% probability (was 50%) Better visibility of likely targets How It Works Now: If last 75 bars show a downtrend , targets will be bearish (even if RSI is oversold) If last 75 bars show an uptrend , targets will be bullish (even if RSI is overbought) The probability adjusts based on trend strength This solves the issue where the script was showing bullish targets in a clear downtrend. Now it properly reflects the dominant trend direction while still considering short-term indicators for probability calculations.
Pine Script® indicator
by WhiteHuracan
2
Volume Surge Detector[SpeculationLab]Volume Surge Detector This tool is especially useful for spotting early signs of breakouts, news-driven spikes, or institutional activity that are often preceded by abnormal surges in volume. For better chart readability, the volume bar colors are based on TradingView’s original Volume indicator, while all other code is fully original by Speculation Lab. You can customize both the SMA line and the volume bar colors to fit your style. The logic compares the current volume against its SMA (default length: 14, fully adjustable). The script comes with two surge levels: Surge Level 1 (default = 5) → When volume is more than 5× the SMA, the bar turns aqua. Surge Level 2 (default = 10) → When volume is more than 10× the SMA, the bar turns yellow. It also includes built-in alerts, so you’ll be notified instantly whenever a surge is detected. This makes it easier to spot potential breakout moves or large market participation in real time. Disclaimer: This script is for educational purposes only. It does not provide financial advice. 这是一个用于探测 成交量爆发 的指标。 为了图表美观，成交量柱的颜色借鉴了 TradingView 原始 Volume 指标，其余代码均为 Speculation Lab 原创。 用户可以自由调整成交量柱和其对应的 SMA 均线的颜色。 指标通过对比成交量和其 SMA（默认长度为14，可自定义长度和颜色）的比例来检测放量。 默认设置了两个放量级别： Surge Level 1（默认=5）：当成交量超过均量的 5 倍时，量柱变为水蓝色。 Surge Level 2（默认=10）：当成交量超过均量的 10 倍时，量柱变为黄色。 脚本还设置了 内置警报功能，方便交易者在出现放量时实时收到通知。
Pine Script® indicator
by SpeculationLab
Trading Panel with EMA Crossovers## Trading Panel with EMA Crossovers - Description **What it does:** This indicator creates a comprehensive trading dashboard that monitors 6 key technical indicators and displays them in an easy-to-read table at the bottom right of your chart. It analyzes market conditions in real-time and provides clear buy/sell signals based on multiple confirmation factors. **Key Features:** 1. **EMA Crossover Tracking (7/21 & 50/200)** - Shows whether fast EMAs are above (CROSSOVER/BULL) or below (CROSSUNDER/BEAR) slow EMAs - Helps identify trend direction and potential entry/exit points - The 7/21 catches short-term momentum shifts - The 50/200 confirms longer-term trend strength 2. **Momentum Indicators** - **RSI**: Identifies overbought (>70) and oversold (<30) conditions - **MFI**: Similar to RSI but includes volume, making it more reliable - **MACD**: Confirms trend direction and momentum shifts 3. **Volume Analysis** - **OBV (On Balance Volume)**: Shows whether smart money is accumulating or distributing - Helps confirm if price moves are supported by volume 4. **Overall Signal System** - Counts bullish vs bearish signals from all indicators - Provides clear BUY/SELL/STRONG BUY/STRONG SELL recommendations - When both EMAs align (both bull or both bear), it triggers the strongest signals **Why it's helpful:** 1. **All-in-One View**: Instead of cluttering your chart with multiple indicators, everything is condensed into one clean table 2. **Multiple Confirmation**: Combines trend (EMAs), momentum (RSI/MFI/MACD), and volume (OBV) for more reliable signals 3. **Visual Clarity**: Color-coded signals (green for bullish, red for bearish) make it easy to assess market conditions at a glance 4. **Reduces False Signals**: By requiring multiple indicators to align, it filters out weak trades 5. **Time-Saving**: No need to check multiple indicators manually - the "OVERALL" row gives you an instant market assessment **Best Use Cases:** - Trend following: Enter when overall signal shows BUY/STRONG BUY in an uptrend - Reversal spotting: Watch for divergences between price and indicators - Risk management: Avoid trades when signals are mixed or neutral - Confirmation tool: Use alongside your existing strategy for extra confidence This indicator is particularly effective for swing traders and position traders who want a quick, comprehensive view of market conditions before making trading decisions.
Pine Script® indicator
by jc100233260
Liquidity Grab Detector (Stop Hunt Sniper) v2.2📌 Purpose This indicator detects Stop Hunts (Liquidity Grabs) — false breakouts above/below recent highs or lows — filtered by trend direction, volatility, and volume conditions. It is designed for scalpers and intraday traders who want to identify high-probability reversal zones. 🧠 How It Works 1. Key Logic Detects previous swing high / swing low over the Lookback Bars. Marks a false breakout when price moves beyond the level and closes back inside. Requires a volume spike on the breakout to confirm liquidity sweep. 2. Trend Filter (EMA 50) Bullish signals only if price is above EMA 50. Bearish signals only if price is below EMA 50. This removes most counter-trend stop hunts. 3. ADX Filter Signals appear only when ADX < Max ADX (low-trend conditions). This avoids false signals in strong trending markets. 📈 How to Use Green Arrows: Bullish stop hunt (potential long entry). Red Arrows: Bearish stop hunt (potential short entry). Works best in range conditions, liquidity zones, or near session highs/lows. Combine with order flow, volume profile, or price action for extra confirmation. Recommended Timeframes: 1m–15m for scalping; 30m–1h for intraday. Markets: Crypto, Forex, Indices. ⚙️ Inputs Lookback Bars — swing detection Volume Spike Multiplier EMA Length (trend filter) Min Retrace — how much price must return inside range Max ADX — trend filter sensitivity ⚠️ Disclaimer This script is for educational purposes only and does not constitute financial advice. Always test thoroughly before live trading.
Pine Script® indicator
by artemka3091
Smart Price Divergence (MACD Filter) + EMA📌 Purpose This indicator detects Price Divergences with MACD filtered by a 200 EMA trend condition. It helps identify high-probability reversal zones aligned with market trend context. 🧠 How It Works 1. MACD Divergence Logic Bearish Divergence: Price makes a higher high. MACD makes a lower high. Price is above EMA (indicating possible exhaustion in bullish trend). Bullish Divergence: Price makes a lower low. MACD makes a higher low. Price is below EMA (indicating possible exhaustion in bearish trend). 2. EMA Trend Filter EMA(200) is used as a directional filter: Bearish divergences considered above EMA (extended bullish conditions). Bullish divergences considered below EMA (extended bearish conditions). 3. Visual & Alerts EMA(200) plotted on chart in orange. Red triangles for Bearish Divergence. Green triangles for Bullish Divergence. Alerts fire for both divergence types. 📈 How to Use Look for divergence signals as potential reversal alerts. Combine with support/resistance or price action for confirmation. EMA ensures signals occur in extended zones, increasing reliability. Recommended Timeframes: 1h, 4h, D. Markets: Forex, Crypto, Stocks. ⚙️ Inputs MACD Fast / Slow / Signal Length EMA Length (default 200) ⚠️ Disclaimer This script is for educational purposes only. It does not constitute financial advice. Always test thoroughly before live trading.
Pine Script® indicator
by artemka3091
Smart Deviation Trend Bands PRO + MTF Filter📌 Purpose This indicator combines multi-level Deviation Bands (±1, ±2, ±3 standard deviations from SMA) with a Higher Timeframe (HTF) Trend Filter. It helps traders identify potential bounce and breakout setups aligned with the dominant market trend. 🧠 How It Works 1. Deviation Bands SMA(Length) is calculated as the centerline. Standard deviations (±1, ±2, ±3) define multiple dynamic support and resistance zones. Outer bands (±3) often mark overextended zones; inner bands (±1, ±2) show active trading areas. 2. HTF Trend Filter A higher timeframe SMA (HTF SMA) acts as a trend confirmation tool. Default filter timeframe: 1 Day. Trend Up: Price > HTF SMA Trend Down: Price < HTF SMA 3. Entry Signals Long Signal: Price crosses above lower deviation band (+1) when HTF trend is UP. Short Signal: Price crosses below upper deviation band (−1) when HTF trend is DOWN. 4. Visuals & Alerts Bands plotted in red (upper) and green (lower). Centerline = SMA in blue. HTF SMA in orange. Circles on chart mark entry points; alerts trigger automatically. 📈 How to Use In trending markets: Trade with the HTF direction, using band touches for entries. In mean-reversion setups: Outer bands can be used to spot potential overbought/oversold zones. Combine with volume or price action for confirmation. Recommended Timeframes: 1h, 4h, D. Markets: Forex, Crypto, Stocks. ⚙️ Inputs SMA Length StdDev Multiplier 1 / 2 / 3 HTF Timeframe (default: D1) ⚠️ Disclaimer This script is for educational purposes only. It does not constitute financial advice. Always test thoroughly before live trading.
Pine Script® indicator
by artemka3091
EMA Grid + Martingale Indicator (Long-Only)Title: EMA Grid + Martingale Indicator (Long-Only) Short Summary: A 4-EMA trend filter combined with a grid-based entry system and optional martingale sizing to visualize staged long entries and exits in bullish markets. Full Description: This indicator combines a 4-EMA trend filter with a grid-based entry system and optional martingale-style position sizing to help traders visualize staged long entries and exits in trending markets. How It Works 1. Trend Detection: Uses two sets of EMAs (fast/slow pairs) to confirm bullish momentum. A long signal is generated when both EMA groups align in an uptrend. 2. Grid Entries: After the initial long entry, additional grid levels are triggered every time price drops by the specified grid step (in pips). 3. Martingale Sizing (Optional): Each subsequent entry can increase in size based on the defined martingale factor. 4. Weighted-Average Exit: Calculates the weighted average of all grid entries and signals an exit when the price reaches or surpasses this level plus an optional buffer. Key Features • 4 EMA Trend Filter with fully customizable lengths. • Dynamic grid entries with visual labels (L1, L2, etc.). • Optional martingale position sizing. • Weighted-average exit with adjustable buffer. • Customizable parameters for EMAs, grid steps, max entries, and buffer pips. • Clear chart visualization of EMAs and entry/exit levels. Use Cases • For traders using cost-averaging or grid strategies in bullish markets. • Visualizes multiple entry levels and profit targets. • Useful for backtesting and strategy planning. Note: This indicator is for visualization and planning purposes only. It does not execute trades automatically. It does not guarantee profits and is not financial advice.
Pine Script® indicator
by Dreeco7
OB/OS adaptative v1.1# OB/OS Adaptative v1.1 - Multi-Timeframe Adaptive Overbought/Oversold Indicator ## Overview The `tradingview_indicator_emas.pine` script is a sophisticated multi-timeframe indicator designed to identify dynamic overbought and oversold levels in financial markets. It combines EMA (Exponential Moving Average) crossovers and Bollinger Bands across monthly, weekly, and daily timeframes to create adaptive support and resistance levels that adjust to changing market conditions. ## Core Functionality ### Multi-Timeframe Analysis The indicator analyzes three timeframes simultaneously: - **Monthly (M)**: Long-term trend identification - **Weekly (W)**: Intermediate-term trend identification - **Daily (D)**: Short-term volatility measurement ### Technical Indicators Used - **EMA 9 and EMA 20**: For trend identification and momentum assessment - **Bollinger Bands (20-period)**: For volatility measurement and extreme level identification - **Price action**: For confirmation of level validity and signal generation ## Key Features ### Adaptive Level Calculation The indicator dynamically determines overbought and oversold levels based on market structure and trend bias: #### Monthly Level Logic - **Bullish Bias** (when monthly open > EMA20): - Oversold = lower of EMA9 or EMA20 - Overbought = upper of EMA9 or Bollinger Upper Band - **Bearish/Neutral Bias** (when monthly open ≤ EMA20): - Oversold = Bollinger Lower Band - Overbought = upper of EMA20 or EMA9 #### Weekly Level Logic - **Bullish Bias** (when weekly open > EMA20): - Oversold = lower of EMA9 or EMA20 - Overbought = Bollinger Upper Band - **Bearish/Neutral Bias** (when weekly open ≤ EMA20): - Oversold = Bollinger Lower Band - Overbought = upper of EMA20 or EMA9 #### Daily Level Logic - Simple Bollinger Bands: - Oversold = Bollinger Lower Band - Overbought = Bollinger Upper Band ### Final Level Determination The indicator combines all three timeframes through a weighted averaging process: 1. Calculates initial values as the average of monthly, weekly, and daily levels 2. Ensures mathematical consistency by enforcing overbought_final ≥ oversold_final using min/max functions 3. Calculates a midpoint average level as the center of the range ### Visual Elements - **Dynamic Lines**: Draws horizontal lines for current and previous period overbought, oversold, and average levels - **Labels**: Places clear textual labels at the start of each period - **Color Coding**: - Red for overbought levels (resistance) - Green for oversold levels (support) - Blue for average levels (pivot point) - **Transparency**: Previous period lines use semi-transparent colors to distinguish between current and historical levels ### Update Mechanism - **Calculation Day**: User-defined day of the week (default: Monday) - On the specified calculation day, the indicator: - Updates all levels based on previous bar's data - Draws new lines extending forward for a user-defined number of days - Maintains previous period lines for comparison and trend analysis - Automatically deletes and recreates lines to ensure clean visualization ### Proximity Detection - Alerts when price approaches overbought/oversold levels (configurable distance in percentage) - Helps identify potential reversal zones before actual crossovers occur - Distance thresholds are user-configurable for both overbought and oversold conditions ### Alert Conditions The indicator provides four distinct alert types: 1. **Cross below oversold**: Triggered when price crosses below the oversold level 2. **Cross above overbought**: Triggered when price crosses above the overbought level 3. **Near oversold**: Triggered when price approaches the oversold level within the configured distance 4. **Near overbought**: Triggered when price approaches the overbought level within the configured distance ### Debug Mode When enabled, displays comprehensive debug information including: - Current values for all levels (oversold, overbought, average) - Timeframe-specific calculations and raw data points - System status information (current day, calculation day, etc.) - Lines existence and timing information - Organized in multiple labels at different price levels to avoid overlap ## Configuration Parameters | Parameter | Default Value | Description | |---------|---------------|-------------| | Short EMA (9) | 9 | Length for short-term EMA calculation | | Long EMA (20) | 20 | Length for long-term EMA calculation | | BB Length | 20 | Period for Bollinger Bands calculation | | Std Dev | 2.0 | Standard deviation multiplier for Bollinger Bands | | Distance to overbought (%) | 0.5 | Percentage threshold for "near overbought" alerts | | Distance to oversold (%) | 0.5 | Percentage threshold for "near oversold" alerts | | Calculation day | Monday | Day of week when levels are recalculated | | Lookback days | 7 | Number of days to extend previous period lines backward | | Forward days | 7 | Number of days to extend current period lines forward | | Show Debug Labels | false | Toggle for comprehensive debug information display | ## Trading Applications ### Primary Use Cases 1. **Reversal Trading**: Identify potential reversal zones when price approaches overbought/oversold levels 2. **Trend Confirmation**: Use the adaptive nature of levels to confirm trend strength and direction 3. **Position Sizing**: Adjust position size based on distance from key levels 4. **Stop Placement**: Use opposite levels as dynamic stop-loss references ### Strategic Advantages - **Adaptive Nature**: Levels adjust to changing market volatility and trend structure - **Multi-Timeframe Confirmation**: Signals are validated across multiple timeframes - **Visual Clarity**: Clear color-coded lines and labels enhance decision-making - **Proactive Alerts**: "Near" conditions provide early warnings before crossovers ## Implementation Details ### Data Security Uses `request.security()` function to fetch data from higher timeframes (monthly, weekly) while maintaining proper bar indexing with ` ` offset for open prices. ### Performance Optimization - Uses `var` keyword to declare persistent variables that maintain state across bars - Efficient line and label management with proper deletion before recreation - Conditional execution of debug code to minimize performance impact ### Error Handling - Comprehensive NA (not available) checks throughout the code - Graceful degradation when data is unavailable for higher timeframes - Mathematical safeguards to prevent invalid level calculations ## Conclusion The OB/OS Adaptative v1.1 indicator represents a sophisticated approach to identifying market extremes by combining multiple technical analysis concepts. Its adaptive nature makes it particularly useful in trending markets where static levels may be less effective. The multi-timeframe approach provides a comprehensive view of market structure, while the visual elements and alert system enhance its practical utility for active traders.
Pine Script® indicator
by leandro_padula
Moving Average Exponential (Daily Frozen EMA)This script plots an Exponential Moving Average (EMA) based on the daily timeframe, but with a unique twist: ✅ The EMA value is frozen for the entire current daily session, only updating when a new daily candle begins. 🔍 How it works: The EMA is calculated using the 1-day timeframe, regardless of the chart's current timeframe. This EMA value remains fixed throughout the day — it doesn't fluctuate intrabar. It updates only once the daily candle has closed, providing a stable and reliable reference point during the trading day. The default is the 5 day EMA but can be changed to any EMA timeframe you desire such as 9, 21, 50, 100. 200, etc. ✨ Additional Features: ✅ Optional smoothing with various moving average types (SMA, EMA, WMA, SMMA, VWMA). ✅ Optional Bollinger Bands on top of the smoothed EMA. ✅ Adjustable settings for EMA length, smoothing type, Bollinger Band deviation, and display options. 🛠️ Use Cases: Ideal for traders who want a non-reactive EMA during intraday trading. Helps reduce signal noise by anchoring EMA to higher timeframe structure. Useful for strategy development where EMA should represent confirmed daily bias only. Hope this helps, happy trading!
Pine Script® indicator
by Equanimity_raven