Get started

Trading

Maddrix_club III (strategy)Maddrix club III (STRATEGY) is an advanced trading algorithm that goes long and short in spite of the market condition. It aims to capture large moves. It is the fruit of over a thousand hours of work, trials, errors, research, etc. The STUDY version is also posted. There are 5 main variables to adjust the indicator: Framework length – Use this to establish the environment. Shorter length = volatile environment. Longer length = steadier. Framework multiplier – Use this to adjust the environment to the asset. Lower value for less volatile price action and higher value for very volatile price action. Search timeframe – Use this to lookback for a fractal . In theory, the longer the lookback the more reliable the fractal recognition. Trigger line – Use this to adjust the trigger level. In theory, the lower the trigger the more signals you get. Threshold – Use this to filter the signals. The higher the threshold, the less signal you get. The best way to go about changing the settings, is to start off the default value. I’d do a monthly check-in playing with few of them and readjusting based on results from the exchange. They are different, as this one can show you the equity curve. It works on many markets as long as there is sufficient activity to create patterns and repetition. You will notice a slight difference between the strategy calculation and the algo calculation (built in the algo) - this is because the exits are not exactly at the same levels. I left this on purpose, so that you can see that even with a little slippage, overall this is positive. Very good results have been observed on the 15 min time frame though it technically works on all timeframe (5 min for example, 1 hour also). On the example above ETHUSDT – 15 min, the back test shows consistency in the results for the last 2 years. The theory behind it is based on probabilities, human emotions, and repetition in market patterns. Results have also shown great adaptability, meaning the total profits don’t change considerably when we play with settings. This is very good because even if you try to fine tune a set of settings to the past, the probability that it keeps working in the future is rather high. Very important note: the calculations DO NOT take into account any fee or slippage that you always experience on the exchanges. The indicators only uses real time data, therefore it can’t repaint. There are absolutely no guarantees about this algorithm and past results are not indicative of future performance. Fees, slippage and API delay: for any algorithm you will use (from me or others), please keep in mind that fees add up, slippage and delay creates differences between algo theory and reality. We can put in place systems to circumvent that, but we will always have them.
Pine Script™ strategy
by Maddrix_club
VMC Oracle This is Oracle. It is a momentum driven indicator with behind-the-scenes filters designed to best indicate the oversold and overbought points on most assets. Oracle partially uses a regression equation displayed in line format with a predetermined spacing to indicate different support and resistance points within the last 100 bars. When used in combination with the smoothed oscillator and moving averages it becomes a powerful tool in your box. It is important to keep in mind that because this indicator is always looking at the last 100 bars the user will need to use the “replay” function on Tradingview for the best manual back-testing to the triggers as possible. It should become clear that when its in the red zone above the ‘zero’ line that the potential for downward movement is greater. The bottom or below ‘zero’ green zone indicates a potential time to buy. In addition to the regression lines, the indicator is supplied with a basic moving average application involving cross analysis. The two lines in cooperation help the user determine when the overall trend is shifting. As an example, when the overall trend may be indicating a bearish market or downtrend it may be beneficial to consider any of Oracle’s triggers that may be opposite more closely. Some of the alerts will trigger in what appears to be opposite trending areas such as a buy trigger when the averages indicate a bearish period. When this happens, it is up to the user utilize other confirmation type tools to assist in the decision of the oracle triggers. The reason for this is that Oracle is designed to predict the change in the market before or during a peak or through area on the graph. The success can be large but this can reduce the automatic trigger’s success in which loss management must be executed. The custom alert function built in is designed to automate the visual comparisons of the two items above. By considering trend, immediate resistance and support lines, and momentum we can help visually indicate the points of possible exhaustion in either direction. When setting up the alert it's as simple as a new alert creation and selecting the VMC Oracle Indicator in the top drop down. After that its as simple as selecting Long Alert or Short alert. As with any tool it is recommended to understand the asset being traded and providing yourself with the best risk management rules to minimize unfavorable movements.
Pine Script™ indicator
by vumanchu
14
Maddrix_club I - Scalper (3commas)Maddrix club I Scalper (3commas version). The code is very different from the ALERTATRON version. It really is not the same! Maddrix Club I is a simple, straightforward trading algorithm that goes long or short, based on user’s choice. It is considered to be a scalper, because it aims to capture small profits that accumulates and compound over time. The theory behind it is based on trend following and DCA . Strategy type one uses momentum to generate signals. Strategy type two uses price action only Very good results have been observed on the 1 min time frame though it technically works on all timeframe (5 min for example, 1 hour also). The most important part of this algorithm is risk management and capital preservation. You can run this with very little capital, and always make sure that in the worst case scenario, meaning when the market goes against you and all your SO (Safety Orders) are filled, you are using less than your account balance. If you are in a trending up phase on the weekly time frame, you can go long. If this is a definite trend down, of course go short. During a bear market, stay long, during a bull market, evidently long as well. For totally new traders, I would recommend to LONG only, and set super low risk settings (cover a 50% drop for example), and see how it runs. Then, as you become a more experienced trader, you can identify trends and short as well, and/or increase your risk. It works on all markets as long as there is volatility . The best way to go about changing the settings, is to start off the default values. I’d run it and see how it fits your risk preferences. There are absolutely no guarantees about this algorithm and past results are not indicative of future performance. Fees, slippage and API delay: for any algorithm you will use (from me or others), please keep in mind that fees add up, slippage and delay creates differences between algo theory and reality. We can put in place systems to circumvent that, but we will always have them. *** This one is SPECIAL 3COMMAS**
Pine Script™ indicator
by Maddrix_club
3SMMA + Fractal Strategy [Kintsugi Trading]What is the 3SMMA + Fractal Strategy? This premium indicator was inspired by my desire to find and place high probability forex trades in any market, direction, or time of day. Why Forex? The Forex markets operate 24 hours, 5.5 days a week Access to meaningful leverage Ability to easily trade long or short High liquidity How to use it! ----- First, start by choosing Breakout Additional PIP Size, Stop Additional PIP Size, and Target Profit (TP) PIP Size. ----- - Breakout Additional PIP Size = Additional PIPs beyond the default strategy entry point. - Stop Additional PIP Size = The default stop is above/below the signal candle, depending on trade direction. This input allows the user to target more or less PIPs as a stopping-out point. - Target Profit (TP) PIP Size = Number of PIPs set at a target profit. ----- Next, we set the Session Filter. ----- Set the Timezone and Trade Session you desire. If no specific session is desired, simply leave the box unchecked. ----- Next, we set the Length of the 3 Smoothed Moving Averages. ----- Enter the Desired Moving Average Length: Length 1 - Source Length 2 - Source Length 3 - Source These inputs will determine whether the strategy looks for Long or Short positions. ----- Next, we set the Fractal Periods. ----- This user input re-programs the strategy to only allow for 'n' number of lower or higher candles on either side of a fractal signal. For example: If the user inputs "5" for the number of Periods, Fractal indicator signals will only appear on candles with "5" candles higher or lower on both sides of the signal candle. In combination with the 3 Smoothed Moving Averages, the Fractal signals help us determine when to take a trade and in what direction. The strategy is essentially looking for trades going with the overall trend and placing potential trades after a low has been reached and is re-tested in the overall trend direction. ----- Finally, we backtest our ideas. ----- After using the 'Strategy Tester' tab on TradingView to thoroughly backtest your predictions you are ready to take it to the next level - Automated Trading! This was my whole reason for creating the script. If you work a full-time job, live in a time zone that is hard to trade, or just don't have the patience, this will be a game-changer for you as it was for me. Auto-Trading When it comes to auto-trading this strategy I have included two options in the script that utilize the alert messages generated by TradingView. *Note: Please trade on a demo account until you feel comfortable enough to use real money, and then please stick to 1%-2% of your total account value in risk per trade.* AutoView PineConnector Good luck with your trading!
Pine Script™ strategy
by KintsugiTrading
Oversold RSI with Tight Stop-Loss Strategy (by Coinrule)KRAKEN:LINKUSD This is one of the best strategies that can be used to get familiar with technical indicators and start to include them in your rules on Coinrule . ENTRY 1. This trading system uses the RSI (Relative Strength Index) to anticipate good points to enter positions. RSI is a technical indicator frequently used in trading. It works by measuring the speed and change of price movements to determine whether a coin is oversold (indicating a good entry point) or overbought (indicating a point of exit/entry for a short position). The RSI oscillates between 0 and 100 and is traditionally considered overbought when over 70 and oversold when below 30. 2. To pick the right moment to buy, the strategy enters a trade when the RSI falls below 30 indicating the coin is oversold and primed for a trend reversal. EXIT The strategy then exits the position when the price appreciates 7% from the point of entry. The position also maintains a tight stop-loss and closes the position if the price depreciates 1% from the entry price. The idea behind this is to cut your losing trades fast and let your winners ride. The best time frame for this strategy based on our back testing data is the daily. Shorter time frames can also work well on certain coins, however in our experience, the daily works best. Feel free to experiment with this script and test it on a variety of your coins! With our back testing data a trading fee of 0.1% is taken into account. The fee is aligned to the base fee applied on Binance, which is the largest cryptocurrency exchange by volume. In the example shown, this strategy made a handsome net profit of 52.6% on Chainlink with 66.67% of trades being profitable. You can execute this strategy on your favorite exchanges with Coinrule .
Pine Script™ strategy
by Coinrule
Bounce Manager TrendlinesThe trendline script is made for manual input of trendlines using point clicks on the chart. The script will then see if price respects these lines by the parameters you input in settings panel. On a respectable bounce it will print buy/sell arrows. The script also has functionality to send alerts, this is helpful if you want to automate trendlines . I created this script and many others under the bounce manager toolkit to expand on the signalling capabilities of popular drawing tools as I find using just a crossover to be lacking especialy for full automation. components: - Line respect: When price moves past this the script will no longer look for entry until a new trend has been established. The line can also be used as a stop loss. - Confirmation: When price touches the line during a trend it will wait to cross over this line to confirm a reaction from the line. - Consolidation filter: A trend filtering system, this is a distance from the line price has to break to confirm trend direction. - Stop loss: This can be set to a percentage distance from the low after bounce. Or it can be set to the line respect line - Take profit: This can be a fixed take profit target or a risk to reward based take profit. With risk to reward it will multiply the stop loss distance by the input and use that to create target (green cross) - ATR based or % based: there are 2 versions of the script, one for strict percentage based logic and another one based on ATR values If you are having problems figuring out which settings to use I recommend you check the Bounce Manager ATR script for reference as this script plots the components: Zignaly automation settings: zignaly integration, you can use the settings panel to decide your risk management. Option to use a fixed take profit % or an automatic risk to reward calculation based on the stop loss. Stop loss can get calculated using the max violation setting as a stop loss (this will put stop loss below line respect level) or when not checked it will use 0.01% below the low of the signal candle as stop loss. Just add your zignaly private key in the settings and use any alert function call as alert. Make sure to use zignaly.com as your webhook url. If 5 trendlines are not enough use the 20 line input version, this script is for the clean strong trendline trader. Part of the Honest Algo indicator suite
Pine Script™ indicator
by Honestcowboy
12
Range Filter + MA Strategy [Kintsugi Trading]What is the Range Filter + MA Strategy? This premium indicator was inspired by my desire to find and place high probability forex trades in any market, direction, or time of day. Why Forex? The Forex markets operate 24 hours, 5.5 days a week Access to meaningful leverage Ability to easily trade long or short High liquidity How to use it! ----- First, start by choosing a Risk/Reward Ratio and Stop PIP Size. ----- - Risk/Reward Ratio = If you have a .5 risk/reward, it means you are risking $100 to make $50. - Stop PIP Size = How many PIPs will be representative of the max risk. i.e. - if you are risking $100 and you set the PIP stop to 10, that means 10 PIPs = $100. ----- Next, we set the Session Filter. ----- Set the Timezone and Trade Session you desire. If no specific session is desired, simply leave the box unchecked. ----- Next, we set the Moving Average Cloud. ----- Enter the Moving Average Type: Simple Moving Average Exponential Moving Average Hull Moving Average Weighted Moving Average Smoothed Moving Average Enter the fast and slow Moving Average Period. These inputs will determine whether the strategy looks for Long or Short positions. ----- Next, we set the Range Filters. ----- In combination with the Moving Average Cloud, the Range Filter will help us determine when to take a trade and in what direction. The strategy is essentially looking for small reversals going against the overall trend and placing a trade once that reversal ends and the price moves back in the direction of the overall trend. The Range filter utilizes confirmation between two entirely separate Range Filter calculations (or set them both equal to use one). Each Range Filter is completely customizable by: Source Calculation (open, high, low, close, hl2, hlc3, ohlc4, hlcc4) Sampling Period Range Multiplier ----- Finally, we backtest our ideas. ----- After using the 'Strategy Tester' tab on TradingView to thoroughly backtest your predictions you are ready to take it to the next level - Automated Trading! This was my whole reason for creating the script. If you work a full-time job, live in a time zone that is hard to trade, or just don't have the patience, this will be a game-changer for you as it was for me. Auto-Trading When it comes to auto-trading this strategy I have included two options in the script that utilize the alert messages generated by TradingView. *Note: Please trade on a demo account until you feel comfortable enough to use real money, and then please stick to 1%-2% of your total account value in risk per trade.* AutoView PineConnector Good luck with your trading!
Pine Script™ strategy
by KintsugiTrading
trading YM based on pair tradingThis is inspired by some online free webinars. Didn't pay for the strategy/ course. I just figured it out myself. So there might be problem with this strategy. Theory: It is based on something called cointegrated. Cointegration means the difference between 2 securities are stable in long term. When the difference is bigger / smaller than normal, then there is space to make profit. You can use some tests to check if they are cointegration. I don't think YM and NQ are strictly cointegrated. I used other platform to test the cointegration. They are not cointegrated. There are multiple ways to do pair trading. I use "Y = A - B * (A /B)" to do this. The back test on tradingview can only trade one security. This is not pair trading in this backtest. But only do long and short based on the theory of pair trading. The max drawdown is huge. You should be careful before doing anything with this strategy. Welcome to give some advice on improvement.
Pine Script™ strategy
by hkorange2007
1
Session Breakout Strategy [Kintsugi Trading]What is Session Breakout Strategy? This premium indicator was inspired by my desire to find and place high probability forex trades in any market, direction, or time of day. Why Forex? The Forex markets operate 24 hours, 5.5 days a week Access to meaningful leverage Ability to easily trade long or short High liquidity How to use it! ----- First, start by choosing a Range Session and Trade Session. ----- - Range Session = Period of time you believe will be predictive of future price action. I like to overlay 'FX Market Sessions' by boitoki to target timeframes in which forex market sessions overlap. This period is indicative of buyers and sellers battling it out in an effort to choose a direction. - Trade Session = Period of time you believe the price will act on the information gathered from the range session. ----- Next, we filter the Range Session by information that will help further predict price movement in the Trade Session. ----- Our tools are: Moving Average Filter Average RSI Filter RSI Decision Level None Each parameter is customizable. ----- Next, we set our risk. ----- Enter the "stop pip size' you desire. Enter the 'target profit pip size' you desire. We can set out ($) dollar risk-per-trade in the inputs. The script does not know your actual account balance, so if you want to risk $100/trade you would enter '$10,000' in the account balance section and '1' in the Risk Per Trade% section. For example, an '8' stop and an '8' tp would indicate a 1:1 risk-reward. *Note - although you may generate a higher win percent with a less favorable RR, it is rarely worth it. ----- Finally, we backtest our ideas. ----- After using the 'Strategy Tester' tab to thoroughly backtest your predictions you are ready to take it to the next level - Automated Trading! This was my whole reason for creating the script. If you work a full-time job, live in a time zone that is hard to trade, or just don't have the patience, this will be a game-changer for you as it was for me. Auto-Trading When it comes to auto-trading this strategy I have included two options in the script that utilize the alert messages generated by TradingView. *Note: Please trade on a demo account until you feel comfortable enough to use real money, and then please stick to 1%-2% of your total account value in risk per trade.* AutoView PineConnector Good luck with your trading!
Pine Script™ strategy
by KintsugiTrading
2
MACD of Aggregated Buy/Sell Pressure - InFinitoModified & Updated script from MARKET VOLUME by Ricardo M Arjona @XeL_Arjona that Includes Aggregated Volume Aggregation code originally from Crypt0rus ***The indicator can be used for any coin/symbol to aggregate volume , but it has to be set up manually*** ***The indicator can be used with specific symbol data only by disabling the aggregation option, which allows for it to be used on any symbol*** - Calculated based on Aggregated Volume instead of by symbol volume . Using aggregated data makes it more accurate and allows to compare volume flow between different kinds of markets (Spot, Futures , Perpetuals, Futures+Perpetuals and All Volume ). - As well, in order to make the data as accurate as possible, the data from each exchange aggregated is normalized to report always in terms of 1 BTC . In case this indicator is used for another symbol, the calculations can be adjusted manually to make it always report data in terms of 1 contract/coin. Buy to Sell Convergence / Divergence by @XeL_Arjona: "It's a simple adaptation of the popular "Price Percentage Oscillator" or MACD but taking Buying Pressure against Selling Pressure Averages, so given a Positive oscillator reading (>0) represents Bullish dominant Trend and a Negative reading (<0) a Bearish dominant Trend. Histogram is the diff between RAW Volume Pressures Convergence/Divergence minus Normalized ones (Signal) which helps as a confirmatory." Things to look for: - Divergences: This indicator can very useful to spot tops and bottoms through divergences
Pine Script™ indicator
by In_Finito_
1
Buy/Sell Aggregated Delta Pressure - InFinitoModified & Updated script from MARKET VOLUME by Ricardo M Arjona @XeL_Arjona that Includes Aggregated Volume , Delta Buy/Sell Pressure Aggregation code originally from Crypt0rus ***The indicator can be used for any coin/symbol to aggregate volume , but it has to be set up manually*** ***The indicator can be used with specific symbol data only by disabling the aggregation option, which allows for it to be used on any symbol*** - Calculated based on Aggregated Volume instead of by symbol volume . Using aggregated data makes it more accurate and allows to compare volume flow between different kinds of markets (Spot, Futures , Perpetuals, Futures+Perpetuals and All Volume ). - As well, in order to make the data as accurate as possible, the data from each exchange aggregated is normalized to report always in terms of 1 BTC . In case this indicator is used for another symbol, the calculations can be adjusted manually to make it always report data in terms of 1 contract/coin. - Buy/Sell Pressure: Smoothens the buy and sell volume into a signal for each. Which makes it easier to identify Buy and Sell Volume Flow. - Buy/Sell Delta Pressure: Calculates the difference between Buy & Sell Pressure and plots a Delta signal that shows who is in control currently. - Buy/Sell + Delta Pressure: Displays both Buy & Sell Pressure and Delta pressure. This can help to visualize who is in control but also how much pressure there is on each side. - A Moving Average can be plotted to the Delta pressure. This, with confluence, can give great entries/exits Things to look for: - Divergences: If price keeps moving in one direction but the pressure to that side decreases it can be inferred that the move might slow down soon or revert. As well if pressure to one side increases but price does not react to it, it signals that the other side is stronger. - MA/Zero Crossovers: Delta Pressure Crossover of its moving average or the 0 Line can indicate direction changes prematurely
Pine Script™ indicator
by In_Finito_
2
Aggregated Volume Based Coloured Bars - InFinitoModified version of Kivanc's Volume Based Colored Bars that colors the bars with Aggregated Volume Data. Aggregation code originally from Crypt0rus ***The indicator can be used for any coin/symbol to aggregate volume , but it has to be set up manually*** ***The indicator can be used with specific symbol data only by disabling the aggregation option, which allows for it to be used on any symbol*** - Calculated based on Aggregated Volume instead of by symbol volume . Using aggregated data makes it more accurate and allows to see if the move was supported (Volume-wise) in all exchanges. - As well, in order to make the data as accurate as possible, the data from each exchange aggregated is normalized to report always in terms of 1 BTC . In case this indicator is used for another symbol, the calculations can be adjusted manually to make it always report data in terms of 1 contract/coin.
Pine Script™ indicator
by In_Finito_
9
MZ Adaptive Ichimoku Cloud (Volume, Volatility, Chikou Filter) This study is a functional enhancement to conventionally used Ichimoku Clouds . It uses particular effective adaptive parameters (Relative Volume Strength Index (MZ RVSI ), Volatility and Chikou Backward Trend Filter) to adapt dynamic lengths for Kijun-sen, Tenkan-sen, Senkou-span and Chikou . This study uses complete available Ichimoku Clouds trading methodology to provide trade confirmations. Its still in experimental phase so will be updated accordingly. ADAPTIVE LENGTH PARAMETERS Relative Volume Strength Index (MZ RVSI ) For adaptive length, I tried using Volume and for this purpose I used my Relative Volume Strength Index " RVSI " indicator. RVSI is the best way to detect if Volume is going for a breakout or not and based on that indication length changes. RVSI breaking above provided value would indicate Volume breakout and hence dynamic length would accordingly make Ichimoku Clouds more over-fitted to better act as support and resistance . Similar case would happen if Volume goes down and dynamic length becomes more under-fit. Original RVSI Library and study can be found here: Volatility Average true range is used as volatility measurement and detection tool. Dual ATR condition would decide over-fitting or under-fitting of curve. Chikou Backward Trend Filter Chikou is basically close value of ticker offset to close and it is a good for indicating if close value has crossed potential Support/Resistance zone from past. Chikou is usually used with 26 period. Chikou filter uses a lookback length calculated from provided lookback percentage and checks if trend was bullish or bearish within that lookback period. Original Chikou Filter library and study can be found here: ADAPTIVE ICHIMOKU CLOUD Tenkan-Sen (Conversion Line) Tenkan-sen is a moving average that is calculated by taking the average of the high and the low for the last nine periods conventionally but in this study its length is dynamically adapted based on Volume, Volatility and Chikou filter. Default adaption range is set to 9-30 which I found universally applicable to almost every market on all time-frames. Kijun-Sen (Base Line) The Kijun-Sen is usually considered a support/resistance line which also acts as an indicator of price movements in the future and takes a longer period into consideration, usually 26 periods compared to Tenkan-Sen’s nine periods is used conventionally. In this study, its length is set to vary in range of 20-60 based on adaptive parameters. Senkou-Span (Leading Span) Senkou-Span A : Senkou Span A is the average of the highs and lows of Tenkan-Sen and Kijun-Sen so it automatically adapts accroding to dynamic lengths of Tenkan and Kijun. Senkou-Span B : Senkou Span B is usually calculated by averaging highs and lows of the past 52 periods and plotting it 26 points to the right but this study uses adaptive parameters to adapt its dynamic length in range of 50-120 which makes Kumo (Ichimoku Cloud) a better area for support and resistance. I don’t consider its necessary to adapt Kumo’s displacement to the right, so I used conventional 26 period as offset. Chikou -Span (Lagging Span) The Chikou Span, also known as the lagging span is formed by taking the price source and offsetting it back 26 periods to the left but I used adaptive length in range 26-50 which makes this tool a better option to check for Chikou -Price cross check in wide range. TRADE SIGNALS & CONFIRMATIONS Volume : RVSI used to detect volume breakout about given point. By default, On Balance Volume based RVSI is selected for all dynamic length adaption and also for trade confirmations. Cross(Tenkan,Kijun) : Easiest way to detect trend as if Tenkan is above Kijun then market is uptrend and vice versa. Volatility : High volatility is a good way to confirm if price is on the move or not. Tenkan = Kijun : Because of a wide range of Tenkan and Kijun length; their value can become equal before reversal. Chikou > Source : A very conventional way to detect price momentum as if Chikou is above price then market is in uptrend and vice versa. Chikou Momentum : Another simpler way to represent Chikou > Source as if momentum of price source is uptrend then price will tend to follow. Source > Kumo : Using the best tool of Ichimoku Clouds i.e. Kumo. If price crosses both Senkou-Span A & B then market has broken potential resistance leading to a good uptrend and vice versa. Source > Tenkan : Better way to detect price trend in short term. Chikou Backward Trend Filter : Different from Chikou >Source in a way that Chikou filter makes sure that price crosses highest/lowest within defined period. CHARTING Bars Coloring : Bars coloring is set as following : src > tenkan-Sen and src > kijun-Sen : Strong uptrend detection and shown by green bars. src < tenkan-Sen and src < kijun-Sen : Strong downtrend detection and shown by green bars. src > tenkan-Sen and src < kijun-Sen : Better way to detect bottom reversals as if price comes above tenkan but remains below kijun; that’s early signs of recovery. Light red bars are used for this by default. src < tenkan-Sen and src > kijun-Sen : Better way to detect top reversals as if price comes below tenkan but remains above kijun; that’s early signs of losing potential in uptrend. Dark Grey bars are used for this by default. Kumo Coloring : Following steps are used to derive Kumo’s dynamic color: Average of Senkou-span A and B is calculated. RSI with 14 period of that average is calculated. Gradient color based on calculated RSI values with 0-100 range is derived which is final Kumo color. Chikou Span Coloring : Dynamic coloring from Chikou Filter is used as Indicator’s Chikou ’s color. Signals Overlay : Red and Green small triangles are used as signals overlay.
Pine Script™ indicator
by MightyZinger
9
Aggregated Money Flow Index - InFinitoModified Version of In-Built Money Flow Index Indicator. Aggregated Volume is used for it's calculation + a couple of other features. Aggregation code originally from Crypt0rus ***The indicator can be used for any coin/symbol to aggregate volume , but it has to be set up manually*** ***The indicator can be used with specific symbol data only by disabling the aggregation option, which allows for it to be used on any symbol*** - Calculated based on Aggregated Volume instead of by symbol volume . Using aggregated data makes it more accurate and allows to compare volume flow between different kinds of markets (Spot, Futures , Perpetuals, Futures+Perpetuals and All Volume ). - As well, in order to make the data as accurate as possible, the data from each exchange aggregated is normalized to report always in terms of 1 BTC . In case this indicator is used for another symbol, the calculations can be adjusted manually to make it always report data in terms of 1 contract/coin. - Added Moving Average ( SMA , EMA , WMA , RMA, VWMA ) that can be plotted to the MFI - Added 10/90 level and 45/55 range level Things to look for: - Divergences: Can be a very good reversal signal - MA crossovers & Oversold/Overbought levels crossover: With proper confluence, entering a position at MA crossover and exiting at oversold/overbought levels can give very good swing setups (Or scalps on LTF) - Center range retests: Once in a trend, retesting the middle range can give very good entries and confirmations of the trend - Confluence of the latter: In combination, if more than one of these occur at the same time it can give more clarity regarding the current state of the market.
Pine Script™ indicator
by In_Finito_
2
Aggregated Chaikin Money Flow - InFinitoModified Version of In-Built Chaikin Money Flow Indicator. Aggregated Volume is used for it's calculation + a couple of other features. Aggregation code originally from Crypt0rus ***The indicator can be used for any coin/symbol to aggregate volume , but it has to be set up manually*** ***The indicator can be used with specific symbol data only by disabling the aggregation option, which allows for it to be used on any symbol*** - Calculated based on Aggregated Volume instead of by symbol volume. Using aggregated data makes it more accurate and allows to compare volume flow between different kinds of markets (Spot, Futures , Perpetuals, Futures+Perpetuals and All Volume ). - As well, in order to make the data as accurate as possible, the data from each exchange aggregated is normalized to report always in terms of 1 BTC. In case this indicator is used for another symbol, the calculations can be adjusted manually to make it always report data in terms of 1 contract/coin. - Added Moving Average ( SMA , EMA , WMA , RMA, VWMA) that can be plotted to the CMF - Changed 0 line to a small range which tends to be more relevant than the 0 line. This range can be manually modified Things to look for: - Divergences: Can be a very good reversal signal - MA crossovers: Can be a very good confluent Buy/Sell signal - Center range retests: CMF is normally defined as bullish above 0 and bearish below 0. In this case it is above or below the middle range. Even if the start of the move was missed. The retest of the middle range can give very good entries. - Confluence of the latter
Pine Script™ indicator
by In_Finito_
1
Aggregated On Balance Volume - InFinitoOn Balance Volume calculated with aggregated and normalized volume data and a few other features: Aggregation code originally from Crypt0rus Candle Plotting code from LonesomeTheBlue ***The indicator can be used for any coin/symbol to aggregate volume, but it has to be set up manually*** As normal OBV, this indicator can be used to find divergences and to have an idea of volume flow. Using aggregated data makes it more accurate and allows to compare volume flow between different kinds of markets (Spot, Futures, Perpetuals, Futures+Perpetuals and All Volume). As well, in order to make the data as accurate as possible, the data from each exchange aggregated is normalized to report always in terms of 1 BTC. In case this indicator is used for another symbol, the calculations can be adjusted manually to make it always report data in terms of 1 contract/coin. Extra features: - Based off LonesomeTheBlue, OBV can be plotted as candles and as Heiken Aishi candles (which give wick information) - A Moving Average (SMA, EMA, WMA, RMA, VWMA) can be plotted to the OBV. This can be used as a confluent signal to enter a trade on a crossover or to know the strength of the current move. - The OBV basis can be reset to 0 periodically, making it more oscillator-like and allowing to focus only on a certain period of time.
Pine Script™ indicator
by In_Finito_
11
DMT TEMPELTON PECKIntroduction Bring your A-game to the market in A-Team style with DMT Templeton Peck – you’ll love it when this plan comes together! Using customized standard deviations between historic price action ranges and volume metrics, DMT Templeton Peck enables traders to never miss a change in trend. In its default state, the DMT Templeton Peck indicator displays key information, such as: • Small trend line • Large trend line • Position entry prices • Take profit levels • Stop levels • Buy and sell trend signals In addition to providing core functionality for the indicator’s strategy signals, traders can use this data to enter or exit trades. When price crosses both trend lines and consolidates there is a high probability that price will continue to move in the same direction. The most profitable results are achieved when trading in the direction of the current large time frame trend. When small and large trend lines cross a trading signal is generated which can be used to automate trades. Please see the ‘TradingView Alerts’ section of this document for further details. The Small & Large trend line’s display can be toggled, and their colors modified in the indicator’s style options as shown below. Basic Strategy In its simplest form, the strategy is to buy when the price crosses and consolidates above both trend lines and sell when the price crosses and consolidates below both trend lines. How to Trade Confident traders may choose to enter a long position at the point #1 when the price passes above both trend lines and begins to consolidate. However, the safer trade is to wait for the trend lines to cross at a point #2 and then look for an entry in the direction of the local trend. One price action begins to reverse to the downside the strategy reverses. Confident traders may choose to enter point #3 when the price passes both trend lines and begins to consolidate once again under the previous price action structure that is now acting as resistance. A sell signal is generated at the point #4 which produced a small profit; however, a new short position could have been opened when the price retraced to resistance at a point #5 and experienced a repeated number of strong rejections. Do not worry if you miss a trade as there is often more than a single opportunity to enter – like at position #5 when price action retests the previous local price structure as resistance. The indicator can be used on smaller time frames to scalp or find an entry after a larger time frame has signaled, however smaller time frames will also be “choppy” and should only be traded with a paper-tested strategy. Traders should take profit on positions at resistance & support levels and look to have fully exited the trade by the time the price crosses back over both trend lines and/or loses a previously established price level. Indicator Tuning In its default state the indicator is tuned for swing trades using 30 minute & 1 hour time frames, however, you are encouraged to experiment with the indicator options. Large & Small Length options define how many historic candles are used for the calculation of the relevant trend line. As a rule of thumb, larger time frames would use smaller values and smaller time frames would use larger values, ie. On a daily chart, a large and small length could be defined as 400 and 100 respectively. Please be aware that there are limits to the amount of historical data for any intraday level based on your TradingView subscription level: • Basic – 5000 bars/candles • Pro & Pro+ - 10000 bars/candles • Premium – 20000 bars/cables TradingView Alerts By utilizing TradingView alerts DMT Templeton Peck's long and short signals can be used to trigger a trading bot. To trigger a long position, set the TradingView Alert Condition to the DMT Templeton Peck indicator and select the ‘Long’ trigger condition with the ‘Once Per Bar Close’ option for best results. To trigger a short position, set the TradingView Alert Condition to the DMT Templeton Peck indicator and select the ‘Short’ trigger condition with the ‘Once Per Bar Close’ option for best results. Take profit options ‘Long_TP_1’ / ‘Short_TP_1’ and Stop options ‘Stop_long’ / ‘Stop_Short’ can also be configured in the same manner to conditionally trigger a trading bot and can be configured in the indicators Input options.
Pine Script™ indicator
by AppTradingRobots
1
TRADING MADE SIMPLEThis indicator shows market structure. The standard method of using Williams Highs and Lows as pivots, is something of an approximation. What's original here is that we follow rules to confirm Local Highs and Local Lows, and strictly enforce that a Low can only follow a confirmed High and vice-versa. -- Highs and Lows To confirm a candle as a Local High, you need a later candle to Close below its Low. To confirm a Local Low, you need a Close above its High. A Low can only follow a High (after it's been confirmed). You can't go e.g High, High, Low, Low, only High, Low, High, Low. When price makes Higher Highs and Higher Lows, market structure is said to be bullish. When price makes Lower Lows and Lower Highs, it's bearish. I've defined the in-between Highs and Lows as "Ranging", meaning, neutral. They could be trend continuation or reversal. -- Bullish/Bearish Breaks A Bullish break in market structure is when the Close of the current candle goes higher than the previous confirmed Local High. A Bearish Break is when the Close of the current candle goes lower than the most recent confirmed Local Low. I chose to use Close rather than High to reduce edge case weirdness. The breaking candle often ends up being a big one, thus the close of that candle can be a poor entry. You can get live warnings by setting the alert to Options: Only Once, because during a candle, the current price is taken as the Close. Breaks are like early warnings of a change in market bias, because you're not waiting for a High or Low to be formed and confirmed. Buy The Dip / Sell The Rally Buy The Dip is a label I gave to the first Higher Low in a bullish market structure. Sell The Rally is the first Lower High in a bearish market structure. These *might* be good buying/selling opportunities, but you still need to do your own analysis to confirm that. == USAGE == The point of knowing market structure is so you don't make bullish bets in a bearish market and vice versa - or if you do at least you're aware that that's what you're doing, and hopefully have some overwhelmingly good reason to do so. These are not signals to be traded on their own. You still need a trade thesis. Use with support & resistance and your other favourite indicators. Works on any market on any timeframe. Be aware that market structure will be different on different timeframes. IMPORTANT: If you're not seeing what you expect, check your settings and re-read this entire description carefully. Confirming Highs and Lows can get deceptively complex.
Pine Script™ indicator
by cashofbne
11
#JJ Trend ----------------- Hey there! The indicator is used for a rough trend assessment. Both superordinate structures and subordinate movements are mapped here. With the help of a calculation via Ema and MACD , different timeframes can be displayed in the same chart. This makes the multi-timeframe analysis extremely easy. On all Asset classes! The indicator is for the m5 / m15 chart. In addition, the display can be adapted using the options and set to any timeframe. Caution: Past results do not guarantee future profits! Follow the link below to get access to this indicator or get us a PM to get access. -------------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------------- ----------------- Willkommen! Der Indikator dient für eine grobe Trendeinschätzung. Hierbei werden sowohl übergeordnete Strukturen als auch untergeordnete Bewegungen abgebildet. Mit Hilfe einer Berechnung über Ema und MACD lassen sich verschiedene Timeframes im gleichen Chart abbilden. Das erleichtert die Multi Timeframe Analyse extrem. Für alle Asset Klassen! Der Indikator ist für den m5 / m15 Chart ausgelegt. Zusätzlich kann die Anzeige über die Optionen angepasst werden und auf jede Timeframe eingestellt werden. Achtung: Vergangene Ergebnisse garantieren keine zukünftigen Gewinne! Verwenden Sie den folgenden Link, um Zugriff auf diesen Indikator zu erhalten oder schreibe uns eine PM um Zugriff zu erhalten.
Pine Script™ indicator
by Speechless-Trading
AltSessionHello World It’s no secret that trading sessions play a massive role in market movement and liquidity. We can clearly see in the image about how important identifying international trading hours are for a trader. The Asian session starts around 1am GMT and often has a bearish bias through this session lasting for a few hours, after which Frankfurt and London traders start to come online and can often reverse the Asian sentiment. The London session is the best session to trade traditionally starting around 7am GMT before the American traders come online and reverse market once again. We have designed this indicator to help identify different trading hours easily with a background shade on the chart and also high/lows of the training session, as these levels can often be revisited. We hope you find this indicator useful and please feel free to drop a comment if you have any updates you wish to be made or any future indicator script ideas, thank you.
Pine Script™ indicator
by Altsignals
16
v1 Swing TradeHello friends I have completed the "Swing Trading" Indicator that I have been working on for a long time. I would like to briefly explain what it does and how it works. Cryptocurrency Markets have high volatility. Of course, money is made by holding, but we are aware that there are more opportunities in the market as the ebb and flow. I must underline that it is "SMALL" by taking small risks to seize this opportunity. This indicator, which will help us to turn these opportunities to our advantage by taking small risks, briefly works as follows. It is a blend of 1 indicator, which is based on fibonacci and pivot points, and supports atr indicator data in the background. I determined the important values ​​of Fibonnaci as entry and exit points. I then completed it with the atr indicator. atr fibonacci automatically pulls the walking graph invisibly. This data is automatically mixed with the atr indicator. When the price candles rise above the atr band, the long entry of the entry price comes. immediately after, the stop loss level is set “SMALL”. Likewise, at the end of 1 Rising Trend, Stuck Prices Will Correct. When the price candles fall below the Atr Band, a short signal comes. and then a "SMALL" Stoploss level is determined together with the entry price. After entering the position, the following stoploss and take profit work. ( Moves with the Trend, Stop Price Does Not Slip In The Opposite Direction After The First Entry. ) If the trade turns into profit after the stop loss level you entered, you should move your stop loss level together with the algorithm and exit the trade with minimum loss and maximum profit. Trailing Stoploss Now it's time to close the position. Price started to shrink. Swing trading Opportunity May Come. What should the user pay attention to ? Signal should be expected as in the first image. When entering the trade, you should definitely put a stoploss. If the Trade Opportunity is Late, the Transaction should not be entered. And most importantly, you should carry your stoploss level with the algorithm. Matters to be Considered in the Settings Tab; Candles to lookback ( Do not reduce the number of past candles below 50.) Reverse Target Point ( Definitely Must Stay Active. Don't turn it off.) Formula a and formula b values ​​increase the signal rate. But Too Many Signals Are Not Healthy. I wish everyone a lot of earnings.
Pine Script™ indicator
by 8aLt4
1