Get started

Trend Analysis

25GN_TrendSqueezeProThe 25GN_TrendSqueezePro is a comprehensive trend-following and momentum-reversal tool. It combines three distinct trading methodologies into one confluence engine: 1. Trend Tracking: A custom CCI/ATR-based trend line. 2. Momentum Squeeze: A Bollinger Band/Keltner Channel volatility detector. 3. MACD Divergence: A price-momentum discrepancy engine powered by the Fontilab library. Adaptive Lookback Automatically adjusts the "Pivot Lookback" based on the timeframe: Weekly: 2-bar right / 5-bar left, Daily: 3-bar right / 8-bar left, Intraday: 5-bar right / 10-bar left. Speed Logic (Adaptive Timeframe) / Smart Divergence: The pivot lookbacks automatically adjust based on whether the user is on a Daily or Weekly chart. Enable Faster Signals: Uses a tfRatio (default 0.66) to calculate signals from a lower timeframe than the chart you are currently viewing. This allows for earlier entries on 1D or Weekly trends. Alert System (The "Umbrella" Logic) The script features a hierarchical alert system managed by the "Enable Umbrella Alert Mode" toggle. Mode 1: Individual Alerts (Toggle OFF) When the Umbrella mode is disabled, you can set specific alerts for every individual event: Buy Signal / Sell Signal Trend Flipped Bullish/Bearish Bullish/Bearish Divergence Mode 2: Umbrella Alerts (Toggle ON) When enabled, the individual alerts above are silenced. Instead, the script only fires the "Bias" alerts: BULL Bias (Umbrella): Fires if any of the following occur: Buy Signal, Trend Flip Green, OR Bullish Divergence. BEAR Bias (Umbrella): Fires if any of the following occur: Sell Signal, Trend Flip Pink, OR Bearish Divergence. Intraday Expansion Icons (< 30m) On lower timeframes, the Trend Line plots specific status dots: Neon Orange Circle: Pre-Expansion (Squeeze ratio is coiling at 0.9). Neon Green/Red Square: Expansion Flash (Squeeze has just broken into volatility). Neon Red/Pink Circle: Squeeze Start (Market has entered a new consolidation phase). Execution Guide Identify Trend: Ensure the Trend Line matches your bias (Green for longs). Wait for Squeeze: Look for the momentum histogram to cross the zero line. Confirm with Divergence: A triangle appearing during a squeeze increases the probability of a successful breakout. Potential Entry: Triggered on the Blue "B" or Black/Red "S" labe. Warning: Trading involves significant risk. This indicator is a tool for technical analysis and should not be used as the sole basis for financial decisions. // This script is provided for educational and entertainment purposes ONLY. The author is not responsible for any trades, losses, or financial decisions in any form resulting from the use of this indicator. Trading involves significant risk; always perform your own due diligence. Use at your own risk.
Pine Script® indicator
by JaiSiaRam
HTF Candle Projection ProHTF Candle Projection Pro is an advanced higher-timeframe visualization and equilibrium analysis tool designed for traders who rely on structure, balance, and multi-timeframe context. It projects higher-timeframe candles directly onto lower-timeframe charts while preserving clarity, allowing you to monitor HTF behavior, mean interaction, and directional bias without switching charts. This tool focuses on context and awareness, not trade signals. Key Features: Select any higher timeframe (intraday or higher) Project up to 30 HTF candles Forward-projected candle layout 50% equilibrium (mean) visualization Real-time HTF candle development HTF mean cross alerts Clean, customizable layout & appearance Feature Breakdown (In Depth): ▶ Multi-Timeframe Candle Projection Select any HTF above your chart timeframe and view its candles as independent projected objects. This allows you to: - Track HTF bias and structure - Observe range expansion or compression - Compare multiple HTF candles at a glance ▶ Equilibrium (50% Mean) Analytics Each HTF candle includes an optional 50% mean level, representing balance within the range. This is useful for: - Mean reversion context - Continuation vs rejection analysis - Identifying acceptance or imbalance - Mean lines automatically adjust based on candle direction. ▶ HTF Mean Cross Alerts Optional alerts trigger when price crosses above or below the current HTF candle’s mean. These alerts are contextual, not signals — they notify you when price transitions between balance regimes relative to HTF structure. ▶ Forward-Projected Layout Candles are drawn ahead of active price action, ensuring: - No obstruction of execution area - Clean separation of context vs price - Easy comparison between historical HTF candles ▶ Live Candle Monitoring The active HTF candle updates in real time, allowing you to monitor: - Wick development - Range expansion - Close location relative to open and mean Settings Overview: HTF Analytics HTF Selection Choose any higher timeframe above your current chart. Candles to Show Display up to 30 HTF candles. Show 50% Mean Threshold Toggle equilibrium visualization. Enable Mean Cross Alerts Receive alerts when price transitions across HTF balance. Best Practices Use on lower timeframes (1m–15m) for execution Align entries with: HTF candle bias HTF highs / lows Mean acceptance or rejection Treat alerts as awareness tools, not trade triggers Combine with: Market structure Liquidity concepts Session context This tool is most effective when used as context, not confirmation. HTF Candle Projection Pro is built for traders who want deeper multi-timeframe awareness without clutter or over-engineering. It does not predict price. It provides structure, balance, and perspective, allowing you to make more informed discretionary decisions. ⚠️ Disclaimer This indicator is for educational and analytical purposes only. Trading carries inherent risks. Past performance does not guarantee future results. By using HTF Candle Projection Pro you acknowledge that all trading decisions are your own. The creators of this indicator are not responsible for any gains or losses resulting from the use of this tool. ✨ Access: If you find this tool useful, consider adding it to your favorites and sharing feedback. Check out our other indicators available at our website. If you'd like access or have any questions, feel free to visit our website or reach out to me directly via DM.
Pine Script® indicator
by largepetrol
Trend Stoplight 10 20 50 EMATrend Stoplight (EMA 10/20/50) — Your Chart’s Traffic Control + Prior Day Levels EMA Stoplight turns messy price action into a clear, real-time decision system. Instead of guessing “is this trend real or just noise?”, it gives you a simple stoplight powered by EMA 10 / EMA 20 / EMA 50—built to help you stay in the right moves longer and get out sooner when conditions break down. 🚦 The Stoplight Rules (No Mystery, No Hidden Filters) GREEN (Go / Long Bias): Price > EMA50 and EMA10 > EMA20 RED (No-Go / Bear Bias): Price < EMA50 and EMA10 < EMA20 YELLOW (Caution / Mixed State): Anything else (transition, chop, or uncertainty) How Traders Use It GREEN: Favor long setups and hold winners while structure stays aligned. YELLOW: Tighten risk, trim, or wait—this is the “conditions are changing” zone. RED: Avoid forcing longs and stop fighting downside structure until it resets. 📍 Prior Day Levels (PDH / PDL / PDC) EMA Stoplight also plots the prior day’s key reference levels: PDH (Prior Day High): A common breakout / resistance trigger. PDL (Prior Day Low): A common breakdown / support trigger. PDC (Prior Day Close): A “line in the sand” reference for bias and mean reversion. These levels are widely watched because they often act like magnets, reaction zones, and decision points—especially on intraday charts. Alerts (Optional, Built-In) PDH Break Alert: Triggers when price crosses above PDH while the stoplight is GREEN. PDL Break Alert: Triggers when price crosses below PDL while the stoplight is RED. This keeps alerts aligned with the trend state—so you’re not getting spammed by random level touches in mixed conditions. Personal trading use only. Not investment advice.
Pine Script® indicator
by TheAITradingDesk
HTF Candle Projection LITEHTF Candle Projection LITE displays higher-timeframe 15-minute candles directly on lower-timeframe charts, allowing you to monitor HTF structure, bias, and candle development without switching timeframes. Rather than compressing price or adding indicators, this tool projects clean HTF candles forward, keeping your active price area unobstructed while preserving context. Core Features: Projects 15-minute HTF candles onto LTF charts Displays: - Candle body - High / low wick Forward-projected layout for clean visibility Live candle updates as the HTF candle forms Built-in timeframe guardrails for accuracy Designed to remain lightweight, stable, and visually minimal. PRO Features (Upgrade Unlock): Multi-timeframe HTF selection: 15m 1H 4H Daily Display up to 10 HTF candles 50% equilibrium (mean) level Precise OHLC price labels Expanded layout flexibility One-time upgrade — no subscriptions. Feature Breakdown (In-Depth): ▶ Higher Timeframe Candle Projection Instead of switching charts or compressing price, HTF candles are drawn as independent objects beside current price action. This allows you to: - Track HTF candle direction and range - See how LTF price interacts with HTF highs/lows - Maintain focus on execution timeframe ▶ Forward-Projected Layout HTF candles are intentionally rendered ahead of price, ensuring: - No obstruction of active trading area - Clear separation between context and execution - Easy comparison between multiple HTF candles ▶ Live Candle Development The most recent HTF candle updates in real time, allowing you to observe: - Range expansion - Wick development - Close location relative to open This is especially useful for HTF bias confirmation. Settings Overview: HTF Candle Settings Candles to Show LITE version is limited to 3 candles for clarity and performance. Margin Gap Controls how far projected candles are offset from current price. Candle Width & Spacing Adjust visual density to suit your chart layout. Best Practices & Usage Tips: Best used on 1m–5m charts for execution Combine with: Market structure Liquidity concepts Session highs/lows Use HTF candle highs/lows as: Contextual targets Reaction zones Bias reference points Avoid using this as a standalone strategy — it is designed to support decision-making, not replace it HTF Candle Projection (15m) is designed for traders who value clarity, structure, and context over complexity. ⚠️ Disclaimer This indicator is for educational and analytical purposes only. Trading carries inherent risks. Past performance does not guarantee future results. By using HTF Candle Projections LITE you acknowledge that all trading decisions are your own. The creators of this indicator are not responsible for any gains or losses resulting from the use of this tool. ✨ Access: If you want full multi-timeframe capability and extended features, consider upgrading to the PRO version via invite.
Pine Script® indicator
by largepetrol
Zig Zag + Breakout Long Signal Description This indicator combines a classic ZigZag with a long-only breakout logic. A buy signal (small upward triangle) is generated when the price closes above the last confirmed swing high. The ZigZag calculation can be based either on closing prices or on high/low prices, depending on the selected input option. This allows the user to adjust the indicator to a more conservative (close-based) or more sensitive (high/low-based) behavior. Each swing high can trigger only one breakout signal, preventing repeated entries on the same level. The indicator is designed to help identify trend continuation setups and breakouts from consolidation phases. An optional confirmed-pivot mode can be used to reduce repainting. Disclaimer This indicator is provided for educational and informational purposes only. It does not constitute financial advice, investment recommendations, or a solicitation to buy or sell any financial instrument. Trading involves risk, and past performance does not guarantee future results. Always conduct your own analysis and use proper risk management before making trading decisions.
Pine Script® indicator
by tk56301
TrendLines + Calendar LevelsIntroduction: This is a powerful charting tool designed to help traders and analysts visualize key support and resistance levels alongside trendlines across multiple timeframes. The indicator automatically identifies trendlines based on recent price action and plots critical highs from multiple periods, including last week, last month, last year, the 52-week high, and all-time high. Key Features: Dynamic Trendlines: Automatically draws rising support and falling resistance trendlines based on user-defined short and long lookback periods. Multi-Timeframe High Levels: Last Week High: Plots the high of the most recently completed week. Last Month High: Plots the high of the most recently completed calendar month. Last Year High: Plots the high of the previous calendar year. 52-Week High: Tracks the highest price over the past 52 weeks. All-Time High (ATH): Highlights the all-time historical high for the symbol. Customizable Appearance: Independent control for each level: show/hide, label visibility, line color, style (solid, dashed, dotted), and width. Trendline colors are adjustable to highlight support (green) and resistance (red). Ease of Use: Simple input options for lookback periods and visual preferences. Ideal for trend analysis, breakout detection, and historical level reference. Inputs & Customization: Short Period and Long Period for trendline calculation. Show/hide options for last week, month, year, 52-week, and all-time highs. Label toggle for all levels. Color, line style (solid/dashed/dotted), and width for each level.
Pine Script® indicator
by UAE_Stock_Pro
ATR Action (Signed) + Signals + ConfidenceATR Action (Signed) — Context-Aware Volatility Signals with Confidence Scoring ATR Action (Signed) is a volatility-normalized indicator designed to answer a simple but often overlooked question: Was today’s move meaningful — or just noise? Instead of measuring raw price change, this indicator compares today’s percent move to the instrument’s typical daily volatility, expressed as a normalized, signed value called ATR Action. What makes this different Most ATR-based tools measure range. This script measures directional impact. ATR Action answers: How large was today’s move relative to normal volatility? Was the move statistically notable or routine? Did it occur with or against the prevailing trend? By combining volatility normalization, trend context, and signal classification, the indicator helps distinguish: Noise vs. meaningful expansion Opportunistic dips vs. structural weakness Momentum continuation vs. exhaustion Core Concepts ATR% (Average Daily Volatility) Calculated as the average absolute daily percent move over a user-defined period. This provides a “daily noise baseline” specific to each instrument. ATR Action (Signed) ATR Action = Today’s % Change ÷ ATR% Positive values = up days Negative values = down days |1.0| ≈ normal daily move |1.5+| = unusually large move |2.5+| = extreme move This allows consistent interpretation across stocks, crypto, and ETFs. Signals (context-aware) Signals are generated only when volatility expansion is meaningful and interpreted through trend context: BUY / ADD Large down day within an uptrend (potential shakeout) MOMENTUM Large up day within an uptrend TRIM / SELL Large up day within a downtrend RISK-OFF Large down day within a downtrend No signals are generated during normal volatility. Confidence Score (0–100) Each signal includes a confidence score, derived from: Magnitude beyond volatility thresholds Alignment with trend direction This is not a probability — it is a relative strength gauge to help compare setups and manage position sizing. On-Chart Table & Explainer The indicator includes: A compact table showing ATR Action, ATR%, today’s move, trend state, signal, and confidence An optional Explainer Panel (toggleable in settings) that documents each metric directly on the chart for transparency and education Intended Use ATR Action is designed for: Swing traders and position traders Scaling in/out rather than binary entries Comparing volatility events across different instruments Filtering emotional reactions during high-volatility periods It does not predict direction and does not repaint. Final Notes This script emphasizes context over prediction. Large moves matter — but only when viewed relative to normal behavior and prevailing trend. Use ATR Action to frame decisions, not replace them.
Pine Script® indicator
by StonkJuicer
BULL-BEAR-WALLDEMPurpose and Overview Designed for minimalistic charting, this indicator computes RSI (default 14-period on close) but hides all visuals—plots, bands, fills, and smoothing—to focus solely on divergence signals. With overlay=true, it integrates labels onto the main price chart, eliminating separate panes and scale issues. Divergences highlight momentum-price mismatches: bullish for potential upturns (e.g., weakening downtrends), bearish for downturns (e.g., fading rallies). The calculateDivergence input (default false) gates the logic, optimizing for user control and performance. Technical Implementation RSI Core: Employs ta.change(), ta.rma() for up/down averages, yielding rsi = 100 - (100 / (1 + up / down)). Divergence Module: Uses ta.pivotlow()/ta.pivothigh() with fixed lookbacks (left/right: 5) and range filter (5-60 bars). Conditions: Bullish (rsiHL && priceLL), Bearish (rsiLH && priceHH), evaluated conditionally. Rendering: plotshape() for labels (" Bull "/ " Bear ") at bar extremes (location.belowbar/abovebar), offset by -lookbackRight. Colors: green bull, red bear. Hiding: color=na for plots/hlines; transparent color.new(..., 100) for fills. Smoothing via switch (SMA/EMA/etc.) but invisible. Alerts: alertcondition() with pivot context messages. The structure prioritizes readability: grouped inputs, modular functions, and no unnecessary visuals. Usage Scenarios and Tips Apply to trending markets—e.g., 4H BTCUSD for crypto reversals or daily TSLA for stock pullbacks. Enable divergence in settings; labels offset to pivots aid quick scans. Pair with volume or trends for confirmation; alerts enable real-time monitoring. For backtesting, adapt to strategy() using conditions as entry signals. Customization Options Inputs: RSI length (min 1), source, divergence toggle (hidden display). Smoothing: Hidden group with MA types, lengths, BB multipliers. Extensions: Expose lookbacks as input.int(); add hidden divergences or MTF via request.security(). Limitations and Considerations Signals rely on data: No divergences mean no labels; adjust parameters for sensitivity. Repainting possible on live bars; best on closed data. Not standalone: Divergences (55-65% historical accuracy per studies) need context to avoid false positives in strong trends. v6-dependent; compatible but feature-limited in v5.
Pine Script® indicator
by walldem
Buddys 4Hr Extended Hours Strat Hunter4H Extended Hours Strat Screener A multi-symbol 4-hour structure screener designed to monitor developing price behavior during extended trading sessions. This script evaluates the previously completed 4H candle and continuously tracks the current developing candle in real time. It identifies structural behavior including: • Inside Bar conditions • Failed 2 Up / Failed 2 Down scenarios • Continuation patterns • Real-time structural shifts during pre-market and after-hours sessions Unlike traditional screeners that only evaluate completed candles, this tool monitors developing structure as it unfolds during extended hours. This script is published as invite-only to manage access. Requirements: Must be used on the 4-hour timeframe with extended hours enabled. Trial access and full access are available upon request.
Pine Script® indicator
by ChrisBuddy317
NTrades[Watchlist Trend Screener]NTrades – Watchlist Trend Screener NTrades Watchlist Trend Screener is a multi-symbol, multi-timeframe market structure scanner designed to help traders quickly identify directional bias and liquidity sweep behavior across selected instruments. The indicator displays a clean, color-coded table overlay showing trend conditions for each symbol across multiple timeframes, allowing traders to perform efficient top-down analysis without switching charts. The screener analyzes up to 8 user-defined symbols and evaluates trend conditions on the following timeframes: • Daily • 4 Hour (H4) • 1 Hour (H1) • 30 Minute (M30) • 15 Minute (M15) The trend classification is based on previous candle structure and liquidity sweep logic. Trend Conditions: Bull Sweep Occurs when the previous candle creates a higher high but closes back below the prior candle high, indicating potential liquidity grab above highs and possible bullish intent. Bear Sweep Occurs when the previous candle creates a lower low but closes back above the prior candle low, indicating potential liquidity grab below lows and possible bearish intent. Bullish Structure Triggered when the previous candle closes higher than the candle before it, suggesting upward momentum. Bearish Structure Triggered when the previous candle closes lower than the candle before it, suggesting downward momentum. Neutral Displayed when the candle range is fully contained within the previous candle range, indicating consolidation or indecision.
Pine Script® indicator
by Nishann
TRharmonic ZigZagTRharmonic Multi-ZigZag — 3-Layer Structure Detector TRharmonic Multi-ZigZag is a professional-grade recursive zigzag indicator that reveals market structure across three hierarchical layers simultaneously. Unlike traditional single-depth zigzag tools, this indicator builds each layer from the structural pivots of the layer below — capturing both micro price action and macro trend direction in a unified view. 🔹 How It Works The indicator operates on three recursive levels: Level 0 (Fast) — Detects base-level swing highs and lows using a configurable lookback window. This layer captures the finest price structure and reacts quickly to new pivots. Level 1 (Medium) — Automatically derived from Level 0's significant pivots (Higher Highs and Lower Lows). Filters out noise and reveals intermediate market structure. Level 2 (Trend) — Built from Level 1's structural breakouts, showing only the dominant trend-level swings. This is the "big picture" layer. Each higher level inherits only the most significant pivots from the level below — HH (Higher High) and LL (Lower Low) pivots propagate upward, while LH (Lower High) and HL (Higher Low) pivots are buffered and only promoted when structurally necessary. 🔹 Pivot Classification Every pivot is automatically classified into one of four categories: HH (Higher High) — Price made a new high above the previous high → Bullish continuation LL (Lower Low) — Price made a new low below the previous low → Bearish continuation LH (Lower High) — Price failed to exceed the previous high → Potential weakness HL (Higher Low) — Price held above the previous low → Potential strength These labels appear directly on the chart with color-coded markers for instant visual recognition. 🔹 Key Features ✅ 3 recursive zigzag layers with independent depth settings ✅ Real-time HH/HL/LH/LL classification on every pivot ✅ Fully customizable colors, line widths, and label visibility per layer ✅ Toggle each layer on/off independently ✅ Professional stats table showing pivot count, last direction, and price per layer ✅ Zero-lag design — no repainting on confirmed bars ✅ Works on all instruments and timeframes (5min+) 🔹 Use Cases Trend Identification: Level 2 shows the dominant trend; consecutive HH+HL = uptrend, LH+LL = downtrend Structure Break Detection: When Level 1 prints an LL after a series of HH = potential trend reversal Multi-Timeframe in Single Chart: Three structural layers eliminate the need to switch between timeframes 🔹 Settings Parameter Default Description Fast Depth 7 Level 0 lookback — more pivots, faster reaction Medium Depth 13 Level 1 — standard market structures Trend Depth 34 Level 2 — major trend waves only Max Pivots 200 Maximum stored pivots per level 🔹 Recommended Approach Start with default settings. Use Level 0 for scalping entries, Level 1 for swing trade structure, and Level 2 for trend direction bias. When all three levels align (e.g., all showing HH), you have strong trend confluence. ⚠️ This indicator is a structural analysis tool. It does not generate buy/sell signals. Always combine with your own analysis and risk management.
Pine Script® indicator
by TRharmonic
ADR/ATR Dashboard & BIH Detector (Breakout & Momentum)Here is the English description, professionally written and formatted with **BBCode** ready for you to copy and paste directly into the TradingView publishing window. ADR/ATR Dashboard & BIH Detector (Breakout & Momentum) This "2-in-1" indicator is designed for momentum traders and breakout players. It combines a precise volatility dashboard with a detection system for "Bullish Impulse Candles" (BIH), a concept popularized by Tamy Kabaj to identify institutional money flow and strong trend initiations. The script consists of two distinct modules: 1. Volatility Dashboard (ADR / ATR) This table displays the normalized volatility over the last 5 periods of the chosen timeframe. It is essential for risk management and understanding if an asset has already exhausted its daily range or if it is compressing before a move. Smart Normalization: Unlike standard calculations, this script normalizes the range before applying the RMA smoothing. ATR Mode: Calculates (True Range / Previous Close) * 100. ADR Mode: Calculates ((High - Low) / Low) * 100. History: Shows values from T-4 to T (Current) to track volatility expansion or contraction. 2. BIH (Bullish Impulse Candle) Detector This module highlights specific candles that meet strict criteria for "Breakouts", "Pocket Pivots", or structural ruptures. It identifies days where buyers are in full control. Adaptive Sizing: You can define a minimum candle size either as a fixed percentage (e.g., 4%) or, more effectively, as a multiple of the ADR/ATR . This allows the indicator to adapt automatically to changing market volatility (e.g., requiring a larger move during volatile periods). Volume Confirmation: The current volume must be higher than the previous candle's volume. Closing Strength (Body Shape): The script checks the "Closing Strength". The candle body must represent a significant portion of the range between the Open and the High, ensuring there is no significant upper wick (rejection). Visual Signals: Blue Bar Color: Indicates a valid BIH (Volume + Size + Strong Close). Blue Circle Above Bar: Indicates a specific high-quality setup where volume resumes after a period of lower volume consolidation (Volume Dry-up). Settings: ADR/ATR: Toggle between modes and set the lookback period (default 21). BIH Mode: Choose between "PCT%" (Fixed) or "ADR/ATR" (Dynamic Multiplier). Candle Body %: Threshold to ensure the close is near the high. This tool is ideal for Swing Trading and filtering out market noise to focus on statistically significant price moves.
Pine Script® indicator
by Sebastien_Llored
Q-Trend + Keltner Squeeze ZonesThe indicator you are using is a **custom combination** of two distinct tools overlaid on the same chart in TradingView: **Q-Trend** (by tarasenko_) and a **Keltner Channel Squeeze** setup (with Bollinger Bands for squeeze detection). The result is a visual system designed to identify trend direction and manage positions with volatility-aware levels. ### 1. Q-Trend Component **Purpose**: Determines the overall trend bias and generates entry/continuation signals. **How it works** (core logic): - It calculates a dynamic **trend line** (often labeled "Q-Trend Line" when visible) as the midpoint between the highest and lowest price over a long lookback period (default 200 bars). - An **ATR-based buffer** (epsilon = ATR × multiplier, default 1.0) is added/subtracted to create upper and lower threshold bands around this trend line. - Signals occur when price crosses or decisively moves beyond these thresholds: - **Buy signal** → price breaks above the upper threshold (trend line + epsilon). - **Sell signal** → price breaks below the lower threshold (trend line – epsilon). - **Strong signals** incorporate additional conditions based on proximity to recent range extremes. - Bar coloring (blue for bullish, red for bearish by default) and optional labels/arrows reinforce the trend direction. **Practical role in your setup**: - Acts as the **primary trend filter**. - You only consider long positions when the chart shows bullish coloring/signals, and short positions when bearish. ### 2. Keltner Channel Squeeze Component **Purpose**: Identifies periods of low volatility (compression) and potential directional breakouts, while providing dynamic support/resistance and trailing levels. **How it works**: - **Center line** → 20-period EMA of close (orange when visible) — serves as your visual midpoint reference. - **Inner bands** → Center ± (ATR × inner multiplier). Default inner = 1.8 ATR. - **Outer bands** → Center ± (ATR × outer multiplier). Default outer = 3.3 ATR. - **Bollinger Bands** (optional, default hidden) → 20-period SMA ± 2 standard deviations — used only internally to detect a **squeeze** (when BB width < inner Keltner width). - **Squeeze breakout arrows**: - Lime up arrow below bar → bullish breakout (close above upper inner band after squeeze). - Red down arrow above bar → bearish breakout (close below lower inner band after squeeze). - **Labels** appear at key events: - "SQUEEZE BREAK UP" / "SQUEEZE BREAK DOWN" on initial breakout. - "REBALANCE UP" / "REBALANCE DOWN" when price returns inside the inner band after a breakout (potential mean-reversion or failure). **Visual zones** (when fills are enabled): - Upper red zone (between inner and outer upper bands) → potential short/rejection area in downtrends. - Lower blue zone (between inner and outer lower bands) → potential long/rejection area in uptrends. ### Your Overall Strategy (as Described) This is a **trend-following system with volatility-based scaling and protection**. It is designed to enter/add to positions in the direction of the prevailing trend while using the Keltner structure for timing and risk management. **Key rules you follow**: 1. **Trend filter first** — Confirm direction with Q-Trend: - Bullish (blue bars, Buy/Strong Buy signals) → only consider long trades. - Bearish (red bars, Sell/Strong Sell signals) → only consider short trades. 2. **Addition (scaling in)**: - In an **uptrend**: Add to longs when price pulls back **below the centerline** (mid Keltner/EMA) or touches/rejects the **inner lower band**. - In a **downtrend**: Add to shorts when price rallies to the **inner upper band**. - Rationale: These are temporary retracements within the trend, not reversals. Scaling here improves average entry price. 3. **Entry trigger**: - Often initiated or confirmed by a Q-Trend Buy/Sell signal. - Keltner breakout arrows (lime/red) can provide additional timing confirmation. 4. **Trailing stop-loss**: - For **long positions**: Trail stop-loss below the **outer lower band** (lower_outer). - For **short positions**: Trail stop-loss above the **outer upper band** (upper_outer). - As price moves favorably, the outer band follows (via the shifting EMA + ATR), automatically locking in gains. - Activate/tighten the trail upon entry (e.g., after a Buy signal or breakout arrow). **Risk considerations**: - Use position sizing appropriate to account risk (e.g., 1–2% per trade). - The outer bands widen in high volatility → more room to breathe but larger potential loss. - Avoid forcing trades in choppy/range-bound markets (Q-Trend signals become less reliable). - Backtest on your specific instrument/timeframe (e.g., futures like ES/NQ) to validate behavior. This setup rewards patience: wait for clear trend alignment (Q-Trend), add on volatility-supported pullbacks (Keltner inner/mid), and let winners run while protecting with adaptive trailing levels (Keltner outer). If you would like clarification on any parameter, visual adjustment, or addition of alerts for your exact rules, please specify.
Pine Script® indicator
by Servantthought
stelaraX - Mass IndexstelaraX – Mass Index stelaraX – Mass Index is a volatility-based indicator designed to identify potential trend reversals by analyzing range expansion and contraction. Instead of focusing on direction, it highlights periods where market dynamics suggest an increased probability of a trend change. This indicator is part of the stelaraX ecosystem, focused on clean technical analysis and AI-supported chart evaluation stelarax.com Core logic The Mass Index evaluates changes in price range by comparing two exponential moving averages of the high–low range and summing their ratio over a defined period. Key principles: * the high–low range reflects daily price expansion * a single EMA smooths short-term range fluctuations * a double EMA further normalizes range behavior * the ratio between both EMAs highlights volatility shifts * summing the ratio emphasizes sustained expansion phases When the Mass Index rises above a predefined trigger level, it signals increased volatility often associated with potential trend reversals. The indicator does not indicate direction and should be combined with other tools for bias confirmation. Visualization The script plots: * the Mass Index line in a separate indicator pane * a dashed trigger level highlighting reversal-risk zones * an additional reference level marking potential setup areas * clean line rendering for clear volatility assessment This visualization helps identify periods of abnormal range expansion at a glance. Use case This indicator is intended for: * identifying potential trend reversal zones * detecting volatility expansion phases * filtering late trend entries during unstable conditions * supporting reversal and mean-reversion strategies * complementing directional indicators with volatility insight It is most effective when combined with trend direction tools, momentum indicators, or AI-assisted chart analysis. Disclaimer This indicator is provided for educational and technical analysis purposes only and does not constitute financial advice or trading recommendations. All trading decisions and risk management remain the responsibility of the user.
Pine Script® indicator
by stelaraX_official
Quant Seasonality ProQuant Seasonality Pro (QuantSeaz) Quant Seasonality Pro is a data-driven seasonal projection tool that extracts historical day-of-year return patterns and transforms them into a forward-looking price curve. Using log returns, cycle filters, and volatility-based scaling (ATR), it generates a dynamically anchored seasonal roadmap directly on your chart. The indicator allows you to switch between Trading Days (stocks/forex) and Calendar Days (crypto), apply U.S. election cycle filters, and analyze precisly historical data. The projected curve is detrended to isolate true seasonal structure and then scaled to current market volatility for realistic visualization. A built-in statistical dashboard provides: Confidence (%) based on historical win rates Expected Alpha (%) over the selected forward window ATR % (noise level) Viability ratio (Alpha adjusted for risk) This tool is designed for contextual edge — not signal automation. It helps traders align positioning with historical seasonal tendencies while maintaining proper risk management and independent confirmation. Hope you enjoy it
Pine Script® indicator
by dinisfranco2006
PSL AI - Analytical Intelligence=== OVERVIEW === PSL AI (Analytical Intelligence) is a comprehensive real-time market analysis assistant that transforms complex technical data into human-readable commentary. Instead of displaying raw numbers, this indicator interprets 19 different analysis modules and presents actionable insights in natural language. Available in three languages: English, Turkish, and Chinese. The indicator displays a dynamic commentary panel that updates with each bar, providing: - Market character assessment (volatile, calm, institutional, panic) - Trend direction with strength analysis - Momentum status with divergence warnings - ICT structures (FVG, MSS, Order Blocks) - Support/Resistance levels with distance percentages - Actionable scenarios with entry, target, and stop levels - Trader psychology warnings (FOMO, panic alerts) === WHAT MAKES THIS INDICATOR ORIGINAL === Traditional indicators show numbers. PSL AI tells you what those numbers mean. 1. AI-Style Commentary Engine The indicator contains 19 specialized analysis functions, each with 8 unique phrase variations. This creates over 50 trillion possible commentary combinations, ensuring the text never feels repetitive. The language adapts to market conditions: urgent during high volatility, calm during consolidation. 2. Multi-Factor Scoring System Rather than relying on a single indicator, PSL AI evaluates 8 independent technical criteria and produces a unified score (0-8) with percentage confidence. This approach reduces false signals by requiring multiple confirmations. 3. Contextual Market Psychology The indicator detects market "character" and warns traders about emotional traps: - High volatility + high volume = "Big players are active, respect the move" - RSI extreme + consecutive candles = "Don't FOMO" or "Don't panic sell" - Score tie = "No clear edge, patience is also a strategy" 4. Actionable Scenario Planning Instead of just showing support/resistance lines, PSL AI provides complete trade scenarios: "If 84,416 breaks -> Target: 97,888 -> Stop: below 84,416" This saves time and helps traders think in terms of risk/reward. === HOW IT WORKS - TECHNICAL DETAILS === SCORING SYSTEM (8 Criteria) Each criterion adds +1 to Long Score or Short Score: - MACD: Long if MACD > Signal | Short if MACD < Signal - RSI: Long if between 50-70 | Short if between 30-50 - Stochastic: Long if %K between 50-80 | Short if %K between 20-50 - Volume: Long if RelVol > 1.2 + bullish bar | Short if RelVol > 1.2 + bearish bar - Delta: Long if Close > Open | Short if Close < Open - Trend: Long if EMA 50 > EMA 169 | Short if EMA 50 < EMA 169 - ADX + DI: Long if ADX > 20 and DI+ > DI- | Short if ADX > 20 and DI- > DI+ - CCI: Long if between 0-150 | Short if between -150-0 Final output examples: - Score 7/8 Long = "BUY (7/8, 87%)" - Score 5/8 Short = "SELL (5/8, 62%)" - Score 3/3 Tie = "NEUTRAL (3/3)" SUPPORT/RESISTANCE ALGORITHM The S/R detection uses: - Pivot High/Low detection with 10-bar lookback - 284-bar historical analysis period - Channel width filtering (10% of range) - Strength requirement: minimum 2 pivot touches - Identifies both nearest and secondary levels for multi-target scenarios ICT STRUCTURES Fair Value Gap (FVG): - Bullish FVG: Current low > 2 bars ago high (gap up) - Bearish FVG: Current high < 2 bars ago low (gap down) - Minimum size filter: 30% of ATR(10) - Auto-invalidation when price fills the gap Market Structure Shift (MSS): - Bullish MSS: Close breaks above last swing high - Bearish MSS: Close breaks below last swing low - Swing detection uses 5-bar pivot lookback Order Blocks (OB): - Bullish OB: Last bearish candle before bullish breakout - Bearish OB: Last bullish candle before bearish breakdown - 10-bar swing detection for OB identification - Auto-invalidation when price breaks OB boundaries ADDITIONAL ANALYSIS MODULES - VWAP Analysis: Position relative to VWAP with distance percentage - Gap Analysis: Detects daily gaps and tracks fill status - Volatility Squeeze: ATR(5) < ATR(20) x 0.75 signals compression - Breakout Confirmation: 20-bar high/low break with volume validation (>1.5x average) - Key Level Rejection: Wick-to-body ratio analysis at S/R zones - Accumulation/Distribution: Detects price/A-D divergence for hidden accumulation or distribution === 19 ANALYSIS MODULES === The commentary panel combines insights from these modules: 1. Market Character - Volatile, calm, institutional, or retail panic 2. Trend Analysis - Direction, strength, EMA distance, consecutive candles 3. Momentum - RSI/Stochastic status with overbought/oversold context 4. Candle Patterns - 21 formations (Doji, Hammer, Engulfing, Morning Star, etc.) 5. Volume Analysis - Relative volume, accumulation signals 6. ICT/FVG/MSS - Smart money concepts with entry levels 7. Order Blocks - OB position and status 8. Volatility - ATR-based risk assessment 9. 50-Bar Range - Distance to recent high/low 10. S/R Distance - Proximity warnings for support/resistance 11. Trader Psychology - FOMO/panic warnings based on conditions 12. VWAP - Intraday bias indicator 13. Gap Analysis - Gap status and fill probability 14. Volatility Squeeze - Pre-breakout compression detection 15. Breakout Confirmation - Real vs fake breakout assessment 16. Key Level Rejection - Wick rejection signals at critical levels 17. Accumulation/Distribution - Hidden buying/selling detection 18. Close Watch - Levels to monitor for confirmed breaks 19. Scenarios - Complete if/then trade plans === HOW TO USE === STEP 1: ADD TO CHART Apply the indicator to any symbol and timeframe. Recommended: 15m, 1H, 4H, Daily. STEP 2: CONFIGURE SETTINGS - Language: Choose Turkish, English, or Chinese - Position: Place panel in any corner or center - Size: Adjust text size for your screen - Color: Select neon accent color (Cyan, Purple, Pink, Green) STEP 3: READ THE PANEL The panel is organized top-to-bottom: - Header: Symbol, timeframe, current price - Analysis: Market commentary organized by topic - Result: Final BUY/SELL/NEUTRAL verdict with score - Close Watch: Key levels to monitor - Scenarios: Conditional trade plans STEP 4: ACT ON SCENARIOS Example panel output: CLOSE WATCH: - 74,466 close BELOW = SELL - 84,416 close ABOVE = BUY SCENARIOS: A) If 84,416 breaks: Target: 97,888 Stop: below 84,416 B) If 74,466 breaks: Target: 70,743 Stop: above 74,466 Wait for a confirmed candle close above/below the level before acting. === SETTINGS EXPLAINED === - Show AI Panel: Toggle the entire commentary panel on/off - Language: Choose between Turkish, English, or Chinese - Panel Position: 6 options available (corners, top-center, bottom-center) - Text Size: Small (compact), Normal, or Large (more readable) - Neon Color: Panel accent color (Cyan, Purple, Pink, or Green) === BEST PRACTICES === Recommended: - Use on higher timeframes (1H+) for more reliable signals - Wait for candle close before acting on breakout scenarios - Combine with price action analysis, do not rely solely on the score - Pay attention to psychology warnings during extreme RSI/consecutive candles - Check volume confirmation for breakouts (indicator will warn if volume is weak) Not Recommended: - Trading every signal. Look for high-score (6+/8) setups - Ignoring the "NEUTRAL" verdict. Sometimes no trade is the best trade - Using on very low timeframes (1m, 5m) for swing trading decisions === LIMITATIONS === - Gap Analysis: Most effective on markets with sessions (stocks, forex). 24/7 crypto markets rarely produce traditional gaps. - Real-time Updates: Commentary updates per bar close. Intra-bar price swings will not change the text until the bar completes. - Language in Inputs: Due to Pine Script limitations, input labels remain in Turkish regardless of selected language. Only the commentary panel text changes. - Not a Trading System: This is a decision-support tool. Always apply your own analysis and risk management. === EXAMPLE INTERPRETATION === When you see this commentary: "Cold winds blowing! Trend down, be careful. 4 red candles in a row! Selling pressure continues. Lower Low formed, decline deepening. RSI at 22.6. For brave ones, opportunity! Stoch in extreme selling zone. ICT ALERT! MSS down + Bear FVG! Smart money says SELL! Entry: 84704 RESULT: SELL (6/8, 75%)" This tells you: 1. Trend is bearish with strong momentum (4 consecutive red candles) 2. RSI is oversold (22.6) - could bounce, but trend still down 3. ICT structure confirms bearish bias (MSS + FVG alignment) 4. 6 out of 8 criteria favor short positions 5. Consider short entries, but watch for oversold bounce === DISCLAIMER === This indicator is for educational and informational purposes only. It does not constitute financial advice, investment recommendations, or trading signals. Past performance of any trading methodology is not indicative of future results. Trading financial instruments involves substantial risk of loss and is not suitable for all investors. Always conduct your own research and consult with a qualified financial advisor before making any investment decisions. Use proper risk management and never trade with money you cannot afford to lose.
Pine Script® indicator
by kriptopusulasi
35
Seasonality (100% reliable for the W)Quant Seasonality Pro (QuantSeaz) Quant Seasonality Pro is a data-driven seasonal projection tool that extracts historical day-of-year return patterns and transforms them into a forward-looking price curve. Using log returns, cycle filters, and volatility-based scaling (ATR), it generates a dynamically anchored seasonal roadmap directly on your chart. The indicator allows you to switch between Trading Days (stocks/forex) and Calendar Days (crypto), apply U.S. election cycle filters, and analyze historical data precisly. The projected curve is detrended to isolate true seasonal structure and then scaled to current market volatility for realistic visualization. A built-in statistical dashboard provides: Confidence (%) based on historical win rates Expected Alpha (%) over the selected forward window ATR % (noise level) Viability ratio (Alpha adjusted for risk) This tool is designed for contextual edge — not signal automation. It helps traders align positioning with historical seasonal tendencies while maintaining proper risk management and independent confirmation.
Pine Script® indicator
by dinisfranco2006
stelaraX - Hull Moving AveragestelaraX – Hull Moving Average stelaraX – Hull Moving Average is a trend-following moving average designed to minimize lag while maintaining a smooth representation of price action. By combining weighted moving averages with a mathematical transformation, it reacts quickly to trend changes without excessive noise. This indicator is part of the stelaraX ecosystem, focused on clean technical analysis and AI-supported chart evaluation stelarax.com Core logic The Hull Moving Average (HMA) is calculated using a combination of weighted moving averages (WMA) with different lengths and a square-root smoothing factor. Key principles: * a shorter WMA increases responsiveness to recent price movement * a longer WMA provides baseline smoothing * the difference between both WMAs accelerates trend reaction * the final WMA with square-root length reduces lag while keeping smoothness * rising HMA values indicate bullish trend momentum * falling HMA values indicate bearish trend momentum This structure allows the HMA to adapt quickly to market changes while avoiding whipsaw behavior common in faster averages. Visualization The script plots: * the Hull Moving Average directly on the price chart * dynamic color changes based on slope direction * green coloring for rising HMA values * red coloring for falling HMA values This clear color logic makes trend direction and momentum shifts immediately visible. Use case This indicator is intended for: * identifying trend direction and early trend changes * acting as dynamic support and resistance * filtering entries in trend-following strategies * confirming momentum during breakouts and pullbacks * replacing traditional moving averages with reduced lag It works especially well in fast-moving markets and integrates smoothly with price action and AI-assisted chart analysis. Disclaimer This indicator is provided for educational and technical analysis purposes only and does not constitute financial advice or trading recommendations. All trading decisions and risk management remain the responsibility of the user.
Pine Script® indicator
by stelaraX_official
PSL UltimateOVERVIEW PSL Ultimate is an all-in-one technical analysis toolkit that combines 15+ professional trading modules into a single, customizable indicator. It provides institutional-grade analysis tools including Support/Resistance detection, Supply/Demand zones, Order Blocks, ICT Concepts (FVG, MSS, OB), Liquidation Heatmap, Auto Fibonacci, and a multi-criteria scoring system. Available in three languages: English, Türkçe (Turkish), and 中文 (Chinese). Designed for traders who want comprehensive market analysis without chart clutter, PSL Ultimate allows you to enable only the features you need while maintaining clean visuals and optimal performance. WHAT MAKES THIS INDICATOR ORIGINAL PSL Ultimate is not a simple mashup—it's a carefully engineered system where each module enhances the others. 𝟭. 𝗨𝗻𝗶𝗳𝗶𝗲𝗱 𝗔𝗿𝗰𝗵𝗶𝘁𝗲𝗰𝘁𝘂𝗿𝗲 All 15+ modules share common calculations (ATR, pivots, volume) to ensure consistency. For example, the same pivot detection algorithm feeds both S/R zones and Order Block identification, ensuring these levels align rather than conflict. 𝟮. 𝗠𝘂𝗹𝘁𝗶-𝗧𝗶𝗺𝗲𝗳𝗿𝗮𝗺𝗲 𝗢𝗿𝗱𝗲𝗿 𝗕𝗹𝗼𝗰𝗸𝘀 Order Blocks from the current timeframe are automatically combined when they overlap, creating "merged" zones with aggregated volume data. This reduces noise while preserving the most significant institutional levels. 𝟯. 𝗩𝗼𝗹𝘂𝗺𝗲𝘁𝗿𝗶𝗰 𝗢𝗿𝗱𝗲𝗿 𝗕𝗹𝗼𝗰𝗸𝘀 Unlike basic OB indicators, PSL Ultimate displays volume breakdown within each Order Block—showing buy vs. sell volume with percentage splits. This helps identify whether an OB is likely to hold or break. 𝟰. 𝗟𝗶𝗾𝘂𝗶𝗱𝗮𝘁𝗶𝗼𝗻 𝗛𝗲𝗮𝘁𝗺𝗮𝗽 A unique feature that estimates liquidation cluster zones based on Open Interest changes. It projects where leveraged positions (25x, 50x, 100x) would be liquidated, helping identify potential "magnet" levels for price. 𝟱. 𝟴-𝗖𝗿𝗶𝘁𝗲𝗿𝗶𝗮 𝗦𝗰𝗼𝗿𝗶𝗻𝗴 𝗦𝘆𝘀𝘁𝗲𝗺 The Summary Table evaluates 8 independent technical factors and produces a unified directional score (0-8) with percentage confidence for both long and short scenarios. 𝟲. 𝟭𝟬-𝗜𝗻𝗱𝗶𝗰𝗮𝘁𝗼𝗿 𝗗𝗶𝘃𝗲𝗿𝗴𝗲𝗻𝗰𝗲 𝗗𝗲𝘁𝗲𝗰𝘁𝗶𝗼𝗻 Scans for divergences across RSI, MACD, MACD Histogram, Momentum, CCI, OBV, Stochastic, DI, VWMACD, and CMF simultaneously. Optional "Simple Mode" requires CCI + OBV confirmation for higher-probability signals. FEATURES LIST 𝗩𝗜𝗦𝗨𝗔𝗟 𝗧𝗢𝗢𝗟𝗦 • EMA Cloud (50/144/169) with crossover signals • Support/Resistance zones with automatic detection • Supply/Demand zones with BOS (Break of Structure) labels • Order Blocks with volumetric breakdown • ICT Concepts: FVG, MSS/BOS, Order Blocks, Liquidity levels • Auto Fibonacci retracement • Fib-based Price Tool with Entry/TP1/TP2/TP3/Stop levels • Bollinger Bands • Automatic Trend Lines • Liquidation Heatmap (OI-based) 𝗔𝗡𝗔𝗟𝗬𝗦𝗜𝗦 𝗧𝗔𝗕𝗟𝗘𝗦 • Summary Table: 8-criteria scoring for Long/Short • MTF Table: Trend direction across 4 timeframes 𝗔𝗟𝗘𝗥𝗧𝗦 (𝟭𝟲 𝗖𝗼𝗻𝗱𝗶𝘁𝗶𝗼𝗻𝘀) • Divergence BUY/SELL • Summary Table BUY/SELL (5/8+) • Trend change (Bullish/Bearish) • EMA Golden Cross / Death Cross • ICT Bull/Bear FVG formation • ICT Bull/Bear MSS signal • Order Block touch (Bull/Bear) • Combined ANY BUY / ANY SELL signal HOW IT WORKS — TECHNICAL DETAILS 𝗦𝗨𝗣𝗣𝗢𝗥𝗧/𝗥𝗘𝗦𝗜𝗦𝗧𝗔𝗡𝗖𝗘 𝗔𝗟𝗚𝗢𝗥𝗜𝗧𝗛𝗠 • Pivot detection: 10-bar lookback for swing highs/lows • Historical scan: 284 bars for level identification • Channel width filter: 10% of price range • Strength requirement: Minimum 2 pivot touches at same level • Dynamic coloring: Support turns resistance when broken (and vice versa) 𝗢𝗥𝗗𝗘𝗥 𝗕𝗟𝗢𝗖𝗞 𝗗𝗘𝗧𝗘𝗖𝗧𝗜𝗢𝗡 • Swing-based identification using 10-bar lookback • ATR-filtered size validation (max 2x ATR) • Volume breakdown: Displays total volume + buy/sell percentage • Auto-invalidation when price breaks through OB • Breaker block conversion when OB fails • Overlap detection: Merges OBs within threshold 𝗜𝗖𝗧 𝗖𝗢𝗡𝗖𝗘𝗣𝗧𝗦 Fair Value Gap (FVG): • Bullish: Low > High with displacement candle • Bearish: High < Low with displacement candle • Minimum size: 30% of ATR(10) • Auto-mitigation tracking Market Structure Shift (MSS): • Bullish: Close breaks above previous swing high • Bearish: Close breaks below previous swing low • Visual labels for MSS and BOS events Order Blocks (ICT style): • Identifies last opposing candle before displacement • Tracks active vs. mitigated status 𝗟𝗜𝗤𝗨𝗜𝗗𝗔𝗧𝗜𝗢𝗡 𝗛𝗘𝗔𝗧𝗠𝗔𝗣 • Uses Open Interest data (automatically detects OI symbol) • Projects liquidation zones for 25x, 50x, 100x leverage • Heat coloring based on OI change intensity (statistical deviation) • Auto-scaling for higher timeframes (Daily/Weekly/Monthly) • Zones removed when price reaches them 𝗦𝗖𝗢𝗥𝗜𝗡𝗚 𝗦𝗬𝗦𝗧𝗘𝗠 Each criterion adds +1 to Long Score or Short Score: • MACD — Long: MACD > Signal | Short: MACD < Signal • RSI — Long: RSI > 50 | Short: RSI < 50 • Stochastic — Long: %K > %D | Short: %K < %D • Volume — Long: RelVol > 1.0 + bullish bar | Short: RelVol > 1.0 + bearish bar • Delta — Long: positive delta + up close | Short: negative delta + down close • Trend — Long: ATR Trend = 1 | Short: ATR Trend = -1 • ADX — Long: ADX > 25 and DI+ > DI- | Short: ADX > 25 and DI- > DI+ • CCI — Long: CCI > 0 | Short: CCI < 0 𝗗𝗜𝗩𝗘𝗥𝗚𝗘𝗡𝗖𝗘 𝗗𝗘𝗧𝗘𝗖𝗧𝗜𝗢𝗡 Scans 10 indicators for divergence: RSI, MACD, MACD Histogram, Momentum, CCI, OBV, Stochastic, DI Oscillator, VWMACD, CMF • Bullish divergence: Price makes lower low, indicator makes higher low • Bearish divergence: Price makes higher high, indicator makes lower high • Simple Mode: Requires both CCI and OBV confirmation HOW TO USE 𝗦𝗧𝗘𝗣 𝟭: 𝗘𝗡𝗔𝗕𝗟𝗘 𝗙𝗘𝗔𝗧𝗨𝗥𝗘𝗦 Open settings and enable only the modules you need in "⚡ Feature Controls": • Support/Resistance, Supply/Demand, Order Blocks, ICT Concepts • Liquidation Heatmap, Bollinger Bands, Auto Trend Lines • Auto Fibonacci, Price Tool, MTF Table, Summary Table 𝗦𝗧𝗘𝗣 𝟮: 𝗖𝗛𝗢𝗢𝗦𝗘 𝗟𝗔𝗡𝗚𝗨𝗔𝗚𝗘 Select your preferred language (English, Türkçe, or 中文) in "⚙ General Settings" 𝗦𝗧𝗘𝗣 𝟯: 𝗖𝗨𝗦𝗧𝗢𝗠𝗜𝗭𝗘 𝗖𝗢𝗟𝗢𝗥𝗦 Each module has dedicated color settings. Adjust transparency and visibility to match your chart style. 𝗦𝗧𝗘𝗣 𝟰: 𝗦𝗘𝗧 𝗔𝗟𝗘𝗥𝗧𝗦 Create alerts using any of the 16 pre-built conditions. Use "ANY BUY/SELL SIGNAL" for combined alerts. 𝗦𝗧𝗘𝗣 𝟱: 𝗨𝗦𝗘 𝗠𝗢𝗕𝗜𝗟𝗘 𝗠𝗢𝗗𝗘 Enable "📱 Mobile Mode" for optimized display on smaller screens—tables and labels automatically resize. SETTINGS OVERVIEW • 🌐 Language — English, Türkçe, or 中文 • ⚡ Feature Controls — Master toggles for all modules • Moving Averages — EMA lengths, cloud colors, crossover labels • Divergence — Simple mode, lines/labels visibility • Support/Resistance — Colors only (algorithm is optimized) • Supply/Demand — Zone colors, BOS label colors • Order Blocks — Bull/Bear colors, zone count • ICT Concepts — Individual toggles for FVG, MSS, OB, Liquidity • Auto Fibonacci — Price labels, extension levels • Price Tool — Entry/TP/Stop colors • Liquidation Heatmap — Resolution, heat colors, OI symbol • Tables — Size, position for Summary and MTF tables BEST PRACTICES ✓ Start with fewer modules enabled, add more as needed ✓ Use Summary Table score 6+/8 for higher-confidence trades ✓ Combine Order Blocks with ICT FVG for confluence ✓ Check MTF Table for trend alignment before trading ✓ Use Mobile Mode when trading on phone/tablet ✓ Set up alerts for hands-free monitoring ✗ Don't enable all features simultaneously—causes visual clutter ✗ Don't trade divergence signals alone—use with trend confirmation ✗ Don't rely solely on Liquidation Heatmap—it's an estimation tool LIMITATIONS • Liquidation Heatmap requires Open Interest data (works best on perpetual futures) • Some features are computationally intensive—disable unused modules for better performance • ICT Concepts work best on liquid markets with clear structure • Auto Fibonacci anchors to recent swing—may reset on new significant moves • Input labels remain in Turkish regardless of language selection (Pine Script limitation) ALERTS REFERENCE Divergence: • 🟢 Divergence BUY — Bullish divergence detected • 🔴 Divergence SELL — Bearish divergence detected Summary Table: • 📊 Summary BUY (5/8+) — Long score reaches 5 or higher • 📊 Summary SELL (5/8+) — Short score reaches 5 or higher Trend: • 🔄 Trend → Bullish — ATR trend turns positive • 🔄 Trend → Bearish — ATR trend turns negative EMA: • 📈 EMA Golden Cross — Fast EMA crosses above slow EMA • 📉 EMA Death Cross — Fast EMA crosses below slow EMA ICT: • 🎯 ICT Bull FVG — Bullish Fair Value Gap forms • 🎯 ICT Bear FVG — Bearish Fair Value Gap forms • ⚡ ICT Bull MSS — Bullish Market Structure Shift • ⚡ ICT Bear MSS — Bearish Market Structure Shift Order Blocks: • 🧱 Bull OB Touch — Price enters bullish Order Block • 🧱 Bear OB Touch — Price enters bearish Order Block Combined: • 🚀 ANY BUY SIGNAL — Any bullish condition triggers • 🔻 ANY SELL SIGNAL — Any bearish condition triggers DISCLAIMER This indicator is for educational and informational purposes only. It does not constitute financial advice, investment recommendations, or trading signals. Trading financial instruments involves substantial risk of loss and is not suitable for all investors. Past performance is not indicative of future results. Always conduct your own research and consult with a qualified financial advisor before making investment decisions. Use proper risk management and never trade with money you cannot afford to lose.
Pine Script® indicator
by kriptopusulasi
37
stelaraX - EMAstelaraX – EMA stelaraX – EMA is a multi-exponential moving average indicator designed to visualize short-, medium-, and long-term trend structure directly on the price chart. By combining multiple EMAs, it provides a clear framework for trend direction, momentum alignment, and dynamic support and resistance. This indicator is part of the stelaraX ecosystem, focused on clean technical analysis and AI-supported chart evaluation stelarax.com Core logic The indicator calculates up to three exponential moving averages (EMAs) with independent lookback periods. EMAs place greater weight on recent price data, making them more responsive to market changes than simple moving averages. Key principles: * the shortest EMA reflects short-term price momentum * the medium EMA represents intermediate trend direction * the longest EMA defines the dominant market trend * EMA alignment indicates trend strength and direction * price interaction with EMAs highlights dynamic support and resistance When shorter EMAs are above longer EMAs, bullish trend conditions dominate. When shorter EMAs are below longer EMAs, bearish trend conditions dominate. Visualization The script plots: * a primary EMA directly on the price chart * optional secondary and tertiary EMAs for extended trend context * individually configurable colors for each EMA * clean line rendering for clear chart readability The ability to toggle EMAs on or off allows flexible adaptation to different trading styles and timeframes. Use case This indicator is intended for: * identifying short-, medium-, and long-term trend direction * confirming trend alignment across multiple time horizons * acting as dynamic support and resistance levels * filtering entries and exits in trend-following strategies * structuring pullback and continuation setups It integrates seamlessly with price action analysis, structure-based systems, and AI-assisted chart evaluation. Disclaimer This indicator is provided for educational and technical analysis purposes only and does not constitute financial advice or trading recommendations. All trading decisions and risk management remain the responsibility of the user.
Pine Script® indicator
by stelaraX_official