Cyber MondayUp to 80% OFF

Trend Analysis

Multi-Confluence Signal System📊 OPTIMIZED MULTI-CONFLUENCE SIGNAL SYSTEM A professional-grade trading indicator that combines multiple technical analysis methods to generate high-probability buy and sell signals. Designed for daily timeframe Bitcoin/crypto trading with optimized parameters based on real market backtesting. 🎯 KEY FEATURES: - Multi-Confluence Scoring (8 components) - Each signal shows strength rating - Smart Top & Bottom Detection - Catches reversals using price action patterns - Ichimoku Cloud Integration - Dynamic support/resistance visualization - Dual EMA System (20/50) - Clear trend identification - RSI + MACD + Volume Confirmation - Multi-indicator validation - Signal Alternation - Only shows directional changes (no repeated signals) - Minimal Bar Spacing - Prevents signal clustering and overtrading ✅ OPTIMIZED FOR: - Catching parabolic tops with rejection wicks - Identifying capitulation bottoms in downtrends - Avoiding false signals during consolidation - 4-8 quality signals per 4-month period on daily charts - Works in both trending and volatile markets 🔧 TECHNICAL COMPONENTS: - EMA 20/50 trend system - RSI (14) with adjusted overbought/oversold levels (68/32) - MACD for momentum confirmation - Ichimoku Cloud for trend context - Volume analysis (1.3x threshold) - Candlestick pattern recognition (engulfing, hammers, shooting stars) - Capitulation detection for extreme moves - Price extension filters (±5-10% from EMAs) ⚠️ BEST PRACTICES: - Optimized for Daily timeframe - Combine with your own risk management - Higher scores = higher probability trades - Wait for signal confirmation on candle close - Use in conjunction with key support/resistance levels 💡 SIGNAL LOGIC: BUY signals trigger on: Capitulation candles, extreme oversold + reversal patterns, MACD turnarounds in downtrends, or high confluence scores with bullish patterns SELL signals trigger on: Rejection wicks at tops, bearish engulfings with overbought RSI, parabolic extensions, MACD reversals, or high confluence scores with bearish patterns 📈 Created through iterative backtesting and optimization on Bitcoin price action from 2024-2025. ⭐ Free to use • Leave feedback • Happy trading!
Pine Script® indicator
by r6ra4
1
Buy Sell Entry Filter SYS (SMC IDM LIT)BUY SELL Entry FILTER An advanced market analysis tool. It provides visual Buy/Sell signals in the form of triangles (▲▼), as well as analytical elements such as Entry/Stop Loss lines, a delta table, overbought and oversold zones, structural market elements with breakouts, displays information from higher time frames, and most importantly, liquidity blocks that trigger reactions. The indicator has a number of built-in filters that help remove unnecessary Buy/Sell signals from the chart. This allows you to create several profitable strategies. You don't need to sit in front of the charts; the alert system (ALERTS) will tell you when to pay attention to the chart and quickly enter a trade. There are many signals, and the ▲▼ lines themselves are not an entry point. You need to filter them using other tools, such as liquidity blocks (LB and HTF LB), trend, OS/OB, Delta, and Pullback breakout. If the ▲▼ appears in the right place, for example, in the liquidity block with the correct trend and the correct delta, then you can enter a trade! Ideally, take short trades of 1/3 – 1/5 RR on a 1-minute timeframe and be sure to set a stop loss. Remember! You are solely responsible for your deposit! Buy/Sell, Entry/SL, OS/OB, Filter, EMA, Delta This main group of settings is responsible for generating buy and sell signals, setting filters, and displaying moving averages. 1. Buy/Sell Main: Enables/disables the display of the main Buy/Sell signal as a ▲▼. This is a specific pattern that identifies potential trend reversals or continuations. Buy/Sell Simple: Toggles the display of a simplified Buy/Sell signal in the ▲▼ pattern. This pattern is less powerful than the main one, but works well in certain contexts. 2. Trend Delta Table: Displays a table on the chart showing the cumulative volume delta for the current trend, as well as the percentage. Useful for assessing the strength of a trend. 3. Entry/SL: When enabled, draws horizontal lines on the chart for Entry and Stop Loss. 4. Filters (Delta, Trend, OS/OB, HTF OS/OB): These filters help filter out false signals. A Buy/Sell signal is displayed only if it passes all enabled filters: Delta Filter: A signal is generated if the volume percentage delta (set by the user) matches the signal direction (positive for Buy, negative for Sell). Trend Filter (EMA): A signal is generated if it matches the trend direction. OS/OB Filter (RSI): A signal is generated if the price where the signal formed is in the desired zone (below Oversold for Buy, above Overbought for Sell). HTF OS/OB Filter (RSI): Same as OS/OB, but uses the RSI on a higher timeframe (HTF). EMA 1 & EMA 2: Displays two exponential moving averages on the chart (default 50 and 100). The line color changes (e.g., green if EMA1 is above EMA2). Overbought/oversold zone This group configures overbought/oversold levels and zones, both on the current and higher timeframes. 1. OS/OB zone: Enables/disables the display of dynamic overbought (Oversold) and oversold (Overbought) levels. These levels "float," adapting to the current price. 2. Period: Period for calculating zones (default 50) OS: Level below which the Oversold zone is defined (default 40). OB: Level above which the Overbought zone is defined (default 60). Labels: Toggles the display of text labels (--- OB, --- OS) next to the corresponding levels. Mid: Toggles the display of the center level and its color. HTF Zones & Labels: Same as for OS/OB, but for levels on a higher timeframe (HTF). Smooth: Enables smoothing for calculated price levels of zones, making the lines less sharp. Structure / Breakout line This setting adds structural analysis elements and breakout lines to the chart. 1. BO Lines (Breakout Lines): Displays horizontal lines on the chart when the price breaks through the external pullback against the trend, thus showing ChoCh. 2. HH/LL: Displays markers (HH - LL - HL - LH) on the chart to indicate key market structural points.________________________________________ Pullbacks EXT/INT This setting is responsible for the visualization of pullback lines (Pullback) at external (EXT) and internal (INT) levels. 1. Ext (External): Displays lines connecting external extremes (Pullback), showing potential pullback levels. 2. Int (Internal): Displays lines connecting internal extremes (Pullback). 3. Pending Ext/Int: Displays potential pullback lines that may form if the price reaches the next extreme. Liquidity blocks Adds visual rectangles (blocks) to the chart, representing potential liquidity zones (where large orders were placed). 1. LB tune: Parameter determining how many candles are used to determine the pattern for a block. 2. High zone: Color of the line inside the block, indicating the strongest part of the block. 3. Show deleted: Shows deleted (broken) blocks in a different color. 4. Volume LB: Enables/disables the display of the volume value in the block. Quick liquidity blocks Similar to main blocks, but creates quick blocks. If a quick block is confirmed, it becomes the main LB; if not, it disappears. 1. Quick LB: Enables/disables quick blocks. 2. QLB tune: Pattern length parameter for quick blocks. HTF liquidity blocks Displays LB from a higher timeframe (HTF), using the same principles as main blocks. 1. HTF: Enable/disable HTF blocks. 2. Select a timeframe for calculation. Alerts A system for alerting you to important indicator actions. Alerts are triggered by certain events. 1. Bull PB Breakout / Bear PB Breakout: Alert when the external pullback is broken and a ChoCh is formed. 2. Trend Change: Alert when a trend changes. 3. New Block: Alert when a new main liquidity block is formed. 4. New HTF Block: Alert when a new HTF liquidity block is formed. 5. Touch Block: Alert when the price of the main liquidity block is touched. 6. Touch HTF Block: Alert when the price of the HTF liquidity block is touched. 7. Touch mode / Touch mode HTF: Select the alert frequency (before or after the bar closes). This indicator provides a powerful and flexible tool for market analysis, combining several approaches in a single interface.
Pine Script® indicator
by ysorokin85
10
Hellenic EMA Matrix - PremiumHellenic EMA Matrix - Alpha Omega Premium Complete User Guide Table of Contents Introduction Indicator Philosophy Mathematical Constants EMA Types Settings Trading Signals Visualization Usage Strategies FAQ Introduction Hellenic EMA Matrix is a premium indicator based on mathematical constants of nature: Phi (Phi - Golden Ratio), Pi (Pi), e (Euler's number). The indicator uses these universal constants to create dynamic EMAs that adapt to the natural rhythms of the market. Key Features: 6 EMA types based on mathematical constants Premium visualization with Neon Glow and Gradient Clouds Automatic Fast/Mid/Slow EMA sorting STRONG signals for powerful trends Pulsing Ribbon Bar for instant trend assessment Works on all timeframes (M1 - MN) Indicator Philosophy Why Mathematical Constants? Traditional EMAs use arbitrary periods (9, 21, 50, 200). Hellenic Matrix goes further, using universal mathematical constants found in nature: Phi (1.618) - Golden Ratio: galaxy spirals, seashells, human body proportions Pi (3.14159) - Pi: circles, waves, cycles e (2.71828) - Natural logarithm base: exponential growth, radioactive decay Markets are also a natural system composed of millions of participants. Using mathematical constants allows tuning into the natural rhythms of market cycles. Mathematical Constants Phi (Phi) - Golden Ratio Phi = 1.618033988749895 Properties: Phi² = Phi + 1 = 2.618 Phi³ = 4.236 Phi⁴ = 6.854 Application: Ideal for trending movements and Fibonacci corrections Pi (Pi) - Pi Number Pi = 3.141592653589793 Properties: 2Pi = 6.283 (full circle) 3Pi = 9.425 4Pi = 12.566 Application: Excellent for cyclical markets and wave structures e (Euler) - Euler's Number e = 2.718281828459045 Properties: e² = 7.389 e³ = 20.085 e⁴ = 54.598 Application: Suitable for exponential movements and volatile markets EMA Types 1. Phi (Phi) - Golden Ratio EMA Description: EMA based on the golden ratio Period Formula: Period = Phi^n × Base Multiplier Parameters: Phi Power Level (1-8): Power of Phi Phi¹ = 1.618 → ~16 period (with Base=10) Phi² = 2.618 → ~26 period Phi³ = 4.236 → ~42 period (recommended) Phi⁴ = 6.854 → ~69 period Recommendations: Phi² or Phi³ for day trading Phi⁴ or Phi⁵ for swing trading Works excellently as Fast EMA 2. Pi (Pi) - Circular EMA Description: EMA based on Pi for cyclical movements Period Formula: Period = Pi × Multiple × Base Multiplier Parameters: Pi Multiple (1-10): Pi multiplier 1Pi = 3.14 → ~31 period (with Base=10) 2Pi = 6.28 → ~63 period (recommended) 3Pi = 9.42 → ~94 period Recommendations: 2Pi ideal as Mid or Slow EMA Excellently identifies cycles and waves Use on volatile markets (crypto, forex) 3. e (Euler) - Natural EMA Description: EMA based on natural logarithm Period Formula: Period = e^n × Base Multiplier Parameters: e Power Level (1-6): Power of e e¹ = 2.718 → ~27 period (with Base=10) e² = 7.389 → ~74 period (recommended) e³ = 20.085 → ~201 period Recommendations: e² works excellently as Slow EMA Ideal for stocks and indices Filters noise well on lower timeframes 4. Delta (Delta) - Adaptive EMA Description: Adaptive EMA that changes period based on volatility Period Formula: Period = Base Period × (1 + (Volatility - 1) × Factor) Parameters: Delta Base Period (5-200): Base period (default 20) Delta Volatility Sensitivity (0.5-5.0): Volatility sensitivity (default 2.0) How it works: During low volatility → period decreases → EMA reacts faster During high volatility → period increases → EMA smooths noise Recommendations: Works excellently on news and sharp movements Use as Fast EMA for quick adaptation Sensitivity 2.0-3.0 for crypto, 1.0-2.0 for stocks 5. Sigma (Sigma) - Composite EMA Description: Composite EMA combining multiple active EMAs Composition Methods: Weighted Average (default): Sigma = (Phi + Pi + e + Delta) / 4 Simple average of all active EMAs Geometric Mean: Sigma = fourth_root(Phi × Pi × e × Delta) Geometric mean (more conservative) Harmonic Mean: Sigma = 4 / (1/Phi + 1/Pi + 1/e + 1/Delta) Harmonic mean (more weight to smaller values) Recommendations: Enable for additional confirmation Use as Mid EMA Weighted Average - most universal method 6. Lambda (Lambda) - Wave EMA Description: Wave EMA with sinusoidal period modulation Period Formula: Period = Base Period × (1 + Amplitude × sin(2Pi × bar / Frequency)) Parameters: Lambda Base Period (10-200): Base period Lambda Wave Amplitude (0.1-2.0): Wave amplitude Lambda Wave Frequency (10-200): Wave frequency in bars How it works: Period pulsates sinusoidally Creates wave effect following market cycles Recommendations: Experimental EMA for advanced users Works well on cyclical markets Frequency = 50 for day trading, 100+ for swing Settings Matrix Core Settings Base Multiplier (1-100) Multiplies all EMA periods Base = 1: Very fast EMAs (Phi³ = 4, 2Pi = 6, e² = 7) Base = 10: Standard (Phi³ = 42, 2Pi = 63, e² = 74) Base = 20: Slow EMAs (Phi³ = 85, 2Pi = 126, e² = 148) Recommendations by timeframe: M1-M5: Base = 5-10 M15-H1: Base = 10-15 (recommended) H4-D1: Base = 15-25 W1-MN: Base = 25-50 Matrix Source Data source selection for EMA calculation: close - closing price (standard) open - opening price high - high low - low hl2 - (high + low) / 2 hlc3 - (high + low + close) / 3 ohlc4 - (open + high + low + close) / 4 When to change: hlc3 or ohlc4 for smoother signals high for aggressive longs low for aggressive shorts Manual EMA Selection Critically important setting! Determines which EMAs are used for signal generation. Use Manual Fast/Slow/Mid Selection Enabled (default): You select EMAs manually Disabled: Automatic selection by periods Fast EMA Fast EMA - reacts first to price changes Recommendations: Phi Golden (recommended) - universal choice Delta Adaptive - for volatile markets Must be fastest (smallest period) Slow EMA Slow EMA - determines main trend Recommendations: Pi Circular (recommended) - excellent trend filter e Natural - for smoother trend Must be slowest (largest period) Mid EMA Mid EMA - additional signal filter Recommendations: e Natural (recommended) - excellent middle level Pi Circular - alternative None - for more frequent signals (only 2 EMAs) IMPORTANT: The indicator automatically sorts selected EMAs by their actual periods: Fast = EMA with smallest period Mid = EMA with middle period Slow = EMA with largest period Therefore, you can select any combination - the indicator will arrange them correctly! Premium Visualization Neon Glow Enable Neon Glow for EMAs - adds glowing effect around EMA lines Glow Strength: Light - subtle glow Medium (recommended) - optimal balance Strong - bright glow (may be too bright) Effect: 2 glow layers around each EMA for 3D effect Gradient Clouds Enable Gradient Clouds - fills space between EMAs with gradient Parameters: Cloud Transparency (85-98): Cloud transparency 95-97 (recommended) Higher = more transparent Dynamic Cloud Intensity - automatically changes transparency based on EMA distance Cloud Colors: Phi-Pi Cloud: Blue - when Pi above Phi (bullish) Gold - when Phi above Pi (bearish) Pi-e Cloud: Green - when e above Pi (bullish) Blue - when Pi above e (bearish) 2 layers for volumetric effect Pulsing Ribbon Bar Enable Pulsing Indicator Bar - pulsing strip at bottom/top of chart Parameters: Ribbon Position: Top / Bottom (recommended) Pulse Speed: Slow / Medium (recommended) / Fast Symbols and colors: Green filled square - STRONG BULLISH Pink filled square - STRONG BEARISH Blue hollow square - Bullish (regular) Red hollow square - Bearish (regular) Purple rectangle - Neutral Effect: Pulsation with sinusoid for living market feel Signal Bar Highlights Enable Signal Bar Highlights - highlights bars with signals Parameters: Highlight Transparency (88-96): Highlight transparency Highlight Style: Light Fill (recommended) - bar background fill Thin Line - bar outline only Highlights: Golden Cross - green Death Cross - pink STRONG BUY - green STRONG SELL - pink Show Greek Labels Shows Greek alphabet letters on last bar: Phi - Phi EMA (gold) Pi - Pi EMA (blue) e - Euler EMA (green) Delta - Delta EMA (purple) Sigma - Sigma EMA (pink) When to use: For education or presentations Show Old Background Old background style (not recommended): Green background - STRONG BULLISH Pink background - STRONG BEARISH Blue background - Bullish Red background - Bearish Not recommended - use new Gradient Clouds and Pulsing Bar Info Table Show Info Table - table with indicator information Parameters: Position: Top Left / Top Right (recommended) / Bottom Left / Bottom Right Size: Tiny / Small (recommended) / Normal / Large Table contents: EMA list - periods and current values of all active EMAs Effects - active visual effects TREND - current trend state: STRONG UP - strong bullish STRONG DOWN - strong bearish Bullish - regular bullish Bearish - regular bearish Neutral - neutral Momentum % - percentage deviation of price from Fast EMA Setup - current Fast/Slow/Mid configuration Trading Signals Show Golden/Death Cross Golden Cross - Fast EMA crosses Slow EMA from below (bullish signal) Death Cross - Fast EMA crosses Slow EMA from above (bearish signal) Symbols: Yellow dot "GC" below - Golden Cross Dark red dot "DC" above - Death Cross Show STRONG Signals STRONG BUY and STRONG SELL - the most powerful indicator signals Conditions for STRONG BULLISH: EMA Alignment: Fast > Mid > Slow (all EMAs aligned) Trend: Fast > Slow (clear uptrend) Distance: EMAs separated by minimum 0.15% Price Position: Price above Fast EMA Fast Slope: Fast EMA rising Slow Slope: Slow EMA rising Mid Trending: Mid EMA also rising (if enabled) Conditions for STRONG BEARISH: Same but in reverse Visual display: Green label "STRONG BUY" below bar Pink label "STRONG SELL" above bar Difference from Golden/Death Cross: Golden/Death Cross = crossing moment (1 bar) STRONG signal = sustained trend (lasts several bars) IMPORTANT: After fixes, STRONG signals now: Work on all timeframes (M1 to MN) Don't break on small retracements Work with any Fast/Mid/Slow combination Automatically adapt thanks to EMA sorting Show Stop Loss/Take Profit Automatic SL/TP level calculation on STRONG signal Parameters: Stop Loss (ATR) (0.5-5.0): ATR multiplier for stop loss 1.5 (recommended) - standard 1.0 - tight stop 2.0-3.0 - wide stop Take Profit R:R (1.0-5.0): Risk/reward ratio 2.0 (recommended) - standard (risk 1.5 ATR, profit 3.0 ATR) 1.5 - conservative 3.0-5.0 - aggressive Formulas: LONG: Stop Loss = Entry - (ATR × Stop Loss ATR) Take Profit = Entry + (ATR × Stop Loss ATR × Take Profit R:R) SHORT: Stop Loss = Entry + (ATR × Stop Loss ATR) Take Profit = Entry - (ATR × Stop Loss ATR × Take Profit R:R) Visualization: Red X - Stop Loss Green X - Take Profit Levels remain active while STRONG signal persists Trading Signals Signal Types 1. Golden Cross Description: Fast EMA crosses Slow EMA from below Signal: Beginning of bullish trend How to trade: ENTRY: On bar close with Golden Cross STOP: Below local low or below Slow EMA TARGET: Next resistance level or 2:1 R:R Strengths: Simple and clear Works well on trending markets Clear entry point Weaknesses: Lags (signal after movement starts) Many false signals in ranging markets May be late on fast moves Optimal timeframes: H1, H4, D1 2. Death Cross Description: Fast EMA crosses Slow EMA from above Signal: Beginning of bearish trend How to trade: ENTRY: On bar close with Death Cross STOP: Above local high or above Slow EMA TARGET: Next support level or 2:1 R:R Application: Mirror of Golden Cross 3. STRONG BUY Description: All EMAs aligned + trend + all EMAs rising Signal: Powerful bullish trend How to trade: ENTRY: On bar close with STRONG BUY or on pullback to Fast EMA STOP: Below Fast EMA or automatic SL (if enabled) TARGET: Automatic TP (if enabled) or by levels TRAILING: Follow Fast EMA Entry strategies: Aggressive: Enter immediately on signal Conservative: Wait for pullback to Fast EMA, then enter on bounce Pyramiding: Add positions on pullbacks to Mid EMA Position management: Hold while STRONG signal active Exit on STRONG SELL or Death Cross appearance Move stop behind Fast EMA Strengths: Most reliable indicator signal Doesn't break on pullbacks Catches large moves Works on all timeframes Weaknesses: Appears less frequently than other signals Requires confirmation (multiple conditions) Optimal timeframes: All (M5 - D1) 4. STRONG SELL Description: All EMAs aligned down + downtrend + all EMAs falling Signal: Powerful bearish trend How to trade: Mirror of STRONG BUY Visual Signals Pulsing Ribbon Bar Quick market assessment at a glance: Symbol Color State Filled square Green STRONG BULLISH Filled square Pink STRONG BEARISH Hollow square Blue Bullish Hollow square Red Bearish Rectangle Purple Neutral Pulsation: Sinusoidal, creates living effect Signal Bar Highlights Bars with signals are highlighted: Green highlight: STRONG BUY or Golden Cross Pink highlight: STRONG SELL or Death Cross Gradient Clouds Colored space between EMAs shows trend strength: Wide clouds - strong trend Narrow clouds - weak trend or consolidation Color change - trend change Info Table Quick reference in corner: TREND: Current state (STRONG UP, Bullish, Neutral, Bearish, STRONG DOWN) Momentum %: Movement strength Effects: Active visual effects Setup: Fast/Slow/Mid configuration Usage Strategies Strategy 1: "Golden Trailing" Idea: Follow STRONG signals using Fast EMA as trailing stop Settings: Fast: Phi Golden (Phi³) Mid: Pi Circular (2Pi) Slow: e Natural (e²) Base Multiplier: 10 Timeframe: H1, H4 Entry rules: Wait for STRONG BUY Enter on bar close or on pullback to Fast EMA Stop below Fast EMA Management: Hold position while STRONG signal active Move stop behind Fast EMA daily Exit on STRONG SELL or Death Cross Take Profit: Partially close at +2R Trail remainder until exit signal For whom: Swing traders, trend followers Pros: Catches large moves Simple rules Emotionally comfortable Cons: Requires patience Possible extended drawdowns on pullbacks Strategy 2: "Scalping Bounces" Idea: Scalp bounces from Fast EMA during STRONG trend Settings: Fast: Delta Adaptive (Base 15, Sensitivity 2.0) Mid: Phi Golden (Phi²) Slow: Pi Circular (2Pi) Base Multiplier: 5 Timeframe: M5, M15 Entry rules: STRONG signal must be active Wait for price pullback to Fast EMA Enter on bounce (candle closes above/below Fast EMA) Stop behind local extreme (15-20 pips) Take Profit: +1.5R or to Mid EMA Or to next level For whom: Active day traders Pros: Many signals Clear entry point Quick profits Cons: Requires constant monitoring Not all bounces work Requires discipline for frequent trading Strategy 3: "Triple Filter" Idea: Enter only when all 3 EMAs and price perfectly aligned Settings: Fast: Phi Golden (Phi³) Mid: e Natural (e²) Slow: Pi Circular (3Pi) Base Multiplier: 15 Timeframe: H4, D1 Entry rules (LONG): STRONG BUY active Price above all three EMAs Fast > Mid > Slow (all aligned) All EMAs rising (slope up) Gradient Clouds wide and bright Entry: On bar close meeting all conditions Or on next pullback to Fast EMA Stop: Below Mid EMA or -1.5 ATR Take Profit: First target: +3R Second target: next major level Trailing: Mid EMA For whom: Conservative swing traders, investors Pros: Very reliable signals Minimum false entries Large profit potential Cons: Rare signals (2-5 per month) Requires patience Strategy 4: "Adaptive Scalper" Idea: Use only Delta Adaptive EMA for quick volatility reaction Settings: Fast: Delta Adaptive (Base 10, Sensitivity 3.0) Mid: None Slow: Delta Adaptive (Base 30, Sensitivity 2.0) Base Multiplier: 3 Timeframe: M1, M5 Feature: Two different Delta EMAs with different settings Entry rules: Golden Cross between two Delta EMAs Both Delta EMAs must be rising/falling Enter on next bar Stop: 10-15 pips or below Slow Delta EMA Take Profit: +1R to +2R Or Death Cross For whom: Scalpers on cryptocurrencies and forex Pros: Instant volatility adaptation Many signals on volatile markets Quick results Cons: Much noise on calm markets Requires fast execution High commissions may eat profits Strategy 5: "Cyclical Trader" Idea: Use Pi and Lambda for trading cyclical markets Settings: Fast: Pi Circular (1Pi) Mid: Lambda Wave (Base 30, Amplitude 0.5, Frequency 50) Slow: Pi Circular (3Pi) Base Multiplier: 10 Timeframe: H1, H4 Entry rules: STRONG signal active Lambda Wave EMA synchronized with trend Enter on bounce from Lambda Wave For whom: Traders of cyclical assets (some altcoins, commodities) Pros: Catches cyclical movements Lambda Wave provides additional entry points Cons: More complex to configure Not for all markets Lambda Wave may give false signals Strategy 6: "Multi-Timeframe Confirmation" Idea: Use multiple timeframes for confirmation Scheme: Higher TF (D1): Determine trend direction (STRONG signal) Middle TF (H4): Wait for STRONG signal in same direction Lower TF (M15): Look for entry point (Golden Cross or bounce from Fast EMA) Settings for all TFs: Fast: Phi Golden (Phi³) Mid: e Natural (e²) Slow: Pi Circular (2Pi) Base Multiplier: 10 Rules: All 3 TFs must show one trend Entry on lower TF Stop by lower TF Target by higher TF For whom: Serious traders and investors Pros: Maximum reliability Large profit targets Minimum false signals Cons: Rare setups Requires analysis of multiple charts Experience needed Practical Tips DOs Use STRONG signals as primary - they're most reliable Let signals develop - don't exit on first pullback Use trailing stop - follow Fast EMA Combine with levels - S/R, Fibonacci, volumes Test on demo before real Adjust Base Multiplier for your timeframe Enable visual effects - they help see the picture Use Info Table - quick situation assessment Watch Pulsing Bar - instant state indicator Trust auto-sorting of Fast/Mid/Slow DON'Ts Don't trade against STRONG signal - trend is your friend Don't ignore Mid EMA - it adds reliability Don't use too small Base Multiplier on higher TFs Don't enter on Golden Cross in range - check for trend Don't change settings during open position Don't forget risk management - 1-2% per trade Don't trade all signals in row - choose best ones Don't use indicator in isolation - combine with Price Action Don't set too tight stops - let trade breathe Don't over-optimize - simplicity = reliability Optimal Settings by Asset US Stocks (SPY, AAPL, TSLA) Recommendation: Fast: Phi Golden (Phi³) Mid: e Natural (e²) Slow: Pi Circular (2Pi) Base: 10-15 Timeframe: H4, D1 Features: Use on daily for swing STRONG signals very reliable Works well on trending stocks Forex (EUR/USD, GBP/USD) Recommendation: Fast: Delta Adaptive (Base 15, Sens 2.0) Mid: Phi Golden (Phi²) Slow: Pi Circular (2Pi) Base: 8-12 Timeframe: M15, H1, H4 Features: Delta Adaptive works excellently on news Many signals on M15-H1 Consider spreads Cryptocurrencies (BTC, ETH, altcoins) Recommendation: Fast: Delta Adaptive (Base 10, Sens 3.0) Mid: Pi Circular (2Pi) Slow: e Natural (e²) Base: 5-10 Timeframe: M5, M15, H1 Features: High volatility - adaptation needed STRONG signals can last days Be careful with scalping on M1-M5 Commodities (Gold, Oil) Recommendation: Fast: Pi Circular (1Pi) Mid: Phi Golden (Phi³) Slow: Pi Circular (3Pi) Base: 12-18 Timeframe: H4, D1 Features: Pi works excellently on cyclical commodities Gold responds especially well to Phi Oil volatile - use wide stops Indices (S&P500, Nasdaq, DAX) Recommendation: Fast: Phi Golden (Phi³) Mid: e Natural (e²) Slow: Pi Circular (2Pi) Base: 15-20 Timeframe: H4, D1, W1 Features: Very trending instruments STRONG signals last weeks Good for position trading Alerts The indicator supports 6 alert types: 1. Golden Cross Message: "Hellenic Matrix: GOLDEN CROSS - Fast EMA crossed above Slow EMA - Bullish trend starting!" When: Fast EMA crosses Slow EMA from below 2. Death Cross Message: "Hellenic Matrix: DEATH CROSS - Fast EMA crossed below Slow EMA - Bearish trend starting!" When: Fast EMA crosses Slow EMA from above 3. STRONG BULLISH Message: "Hellenic Matrix: STRONG BULLISH SIGNAL - All EMAs aligned for powerful uptrend!" When: All conditions for STRONG BUY met (first bar) 4. STRONG BEARISH Message: "Hellenic Matrix: STRONG BEARISH SIGNAL - All EMAs aligned for powerful downtrend!" When: All conditions for STRONG SELL met (first bar) 5. Bullish Ribbon Message: "Hellenic Matrix: BULLISH RIBBON - EMAs aligned for uptrend" When: EMAs aligned bullish + price above Fast EMA (less strict condition) 6. Bearish Ribbon Message: "Hellenic Matrix: BEARISH RIBBON - EMAs aligned for downtrend" When: EMAs aligned bearish + price below Fast EMA (less strict condition) How to Set Up Alerts: Open indicator on chart Click on three dots next to indicator name Select "Create Alert" In "Condition" field select needed alert: Golden Cross Death Cross STRONG BULLISH STRONG BEARISH Bullish Ribbon Bearish Ribbon Configure notification method: Pop-up in browser Email SMS (in Premium accounts) Push notifications in mobile app Webhook (for automation) Select frequency: Once Per Bar Close (recommended) - once on bar close Once Per Bar - during bar formation Only Once - only first time Click "Create" Tip: Create separate alerts for different timeframes and instruments FAQ 1. Why don't STRONG signals appear? Possible reasons: Incorrect Fast/Mid/Slow order Solution: Indicator automatically sorts EMAs by periods, but ensure selected EMAs have different periods Base Multiplier too large Solution: Reduce Base to 5-10 on lower timeframes Market in range Solution: STRONG signals appear only in trends - this is normal Too strict EMA settings Solution: Try classic combination: Phi³ / Pi×2 / e² with Base=10 Mid EMA too close to Fast or Slow Solution: Select Mid EMA with period between Fast and Slow 2. How often should STRONG signals appear? Normal frequency: M1-M5: 5-15 signals per day (very active markets) M15-H1: 2-8 signals per day H4: 3-10 signals per week D1: 2-5 signals per month W1: 2-6 signals per year If too many signals - market very volatile or Base too small If too few signals - market in range or Base too large 4. What are the best settings for beginners? Universal "out of the box" settings: Matrix Core: Base Multiplier: 10 Source: close Phi Golden: Enabled, Power = 3 Pi Circular: Enabled, Multiple = 2 e Natural: Enabled, Power = 2 Delta Adaptive: Enabled, Base = 20, Sensitivity = 2.0 Manual Selection: Fast: Phi Golden Mid: e Natural Slow: Pi Circular Visualization: Gradient Clouds: ON Neon Glow: ON (Medium) Pulsing Bar: ON (Medium) Signal Highlights: ON (Light Fill) Table: ON (Top Right, Small) Signals: Golden/Death Cross: ON STRONG Signals: ON Stop Loss: OFF (while learning) Timeframe for learning: H1 or H4 5. Can I use only one EMA? No, minimum 2 EMAs (Fast and Slow) for signal generation. Mid EMA is optional: With Mid EMA = more reliable but rarer signals Without Mid EMA = more signals but less strict filtering Recommendation: Start with 3 EMAs (Fast/Mid/Slow), then experiment 6. Does the indicator work on cryptocurrencies? Yes, works excellently! Especially good on: Bitcoin (BTC) Ethereum (ETH) Major altcoins (SOL, BNB, XRP) Recommended settings for crypto: Fast: Delta Adaptive (Base 10-15, Sensitivity 2.5-3.0) Mid: Pi Circular (2Pi) Slow: e Natural (e²) Base: 5-10 Timeframe: M15, H1, H4 Crypto market features: High volatility → use Delta Adaptive 24/7 trading → set alerts Sharp movements → wide stops 7. Can I trade only with this indicator? Technically yes, but NOT recommended. Best approach - combine with: Price Action - support/resistance levels, candle patterns Volume - movement strength confirmation Fibonacci - retracement and extension levels RSI/MACD - divergences and overbought/oversold Fundamental analysis - news, company reports Hellenic Matrix: Excellently determines trend and its strength Provides clear entry/exit points Doesn't consider fundamentals Doesn't see major levels 8. Why do Gradient Clouds change color? Color depends on EMA order: Phi-Pi Cloud: Blue - Pi EMA above Phi EMA (bullish alignment) Gold - Phi EMA above Pi EMA (bearish alignment) Pi-e Cloud: Green - e EMA above Pi EMA (bullish alignment) Blue - Pi EMA above e EMA (bearish alignment) Color change = EMA order change = possible trend change 9. What is Momentum % in the table? Momentum % = percentage deviation of price from Fast EMA Formula: Momentum = ((Close - Fast EMA) / Fast EMA) × 100 Interpretation: +0.5% to +2% - normal bullish momentum +2% to +5% - strong bullish momentum +5% and above - overheating (correction possible) -0.5% to -2% - normal bearish momentum -2% to -5% - strong bearish momentum -5% and below - oversold (bounce possible) Usage: Monitor momentum during STRONG signals Large momentum = don't enter (wait for pullback) Small momentum = good entry point 10. How to configure for scalping? Settings for scalping (M1-M5): Base Multiplier: 3-5 Source: close or hlc3 (smoother) Fast: Delta Adaptive (Base 8-12, Sensitivity 3.0) Mid: None (for more signals) Slow: Phi Golden (Phi²) or Pi Circular (1Pi) Visualization: - Gradient Clouds: ON (helps see strength) - Neon Glow: OFF (doesn't clutter chart) - Pulsing Bar: ON (quick assessment) - Signal Highlights: ON Signals: - Golden/Death Cross: ON - STRONG Signals: ON - Stop Loss: ON (1.0-1.5 ATR, R:R 1.5-2.0) Scalping rules: Trade only STRONG signals Enter on bounce from Fast EMA Tight stops (10-20 pips) Quick take profit (+1R to +2R) Don't hold through news 11. How to configure for long-term investing? Settings for investing (D1-W1): Base Multiplier: 20-30 Source: close Fast: Phi Golden (Phi³ or Phi⁴) Mid: e Natural (e²) Slow: Pi Circular (3Pi or 4Pi) Visualization: - Gradient Clouds: ON - Neon Glow: ON (Medium) - Everything else - to taste Signals: - Golden/Death Cross: ON - STRONG Signals: ON - Stop Loss: OFF (use percentage stop) Investing rules: Enter only on STRONG signals Hold while STRONG active (weeks/months) Stop below Slow EMA or -10% Take profit: by company targets or +50-100% Ignore short-term pullbacks 12. What if indicator slows down chart? Indicator is optimized, but if it slows: Disable unnecessary visual effects: Neon Glow: OFF (saves 8 plots) Gradient Clouds: ON but low quality Lambda Wave EMA: OFF (if not using) Reduce number of active EMAs: Sigma Composite: OFF Lambda Wave: OFF Leave only Phi, Pi, e, Delta Simplify settings: Pulsing Bar: OFF Greek Labels: OFF Info Table: smaller size 13. Can I use on different timeframes simultaneously? Yes! Multi-timeframe analysis is very powerful: Classic scheme: Higher TF (D1, W1) - determine global trend Wait for STRONG signal This is our trading direction Middle TF (H4, H1) - look for confirmation STRONG signal in same direction Precise entry zone Lower TF (M15, M5) - entry point Golden Cross or bounce from Fast EMA Precise stop loss Example: W1: STRONG BUY active (global uptrend) H4: STRONG BUY appeared (confirmation) M15: Wait for Golden Cross or bounce from Fast EMA → ENTRY Advantages: Maximum reliability Clear timeframe hierarchy Large targets 14. How does indicator work on news? Delta Adaptive EMA adapts excellently to news: Before news: Low volatility → Delta EMA becomes fast → pulls to price During news: Sharp volatility spike → Delta EMA slows → filters noise After news: Volatility normalizes → Delta EMA returns to normal Recommendations: Don't trade at news release moment (spreads widen) Wait for STRONG signal after news (2-5 bars) Use Delta Adaptive as Fast EMA for quick reaction Widen stops by 50-100% during important news Advanced Techniques Technique 1: "Divergences with EMA" Idea: Look for discrepancies between price and Fast EMA Bullish divergence: Price makes lower low Fast EMA makes higher low = Possible reversal up Bearish divergence: Price makes higher high Fast EMA makes lower high = Possible reversal down How to trade: Find divergence Wait for STRONG signal in divergence direction Enter on confirmation Technique 2: "EMA Tunnel" Idea: Use space between Fast and Slow EMA as "tunnel" Rules: Wide tunnel - strong trend, hold position Narrow tunnel - weak trend or consolidation, caution Tunnel narrowing - trend weakening, prepare to exit Tunnel widening - trend strengthening, can add Visually: Gradient Clouds show this automatically! Trading: Enter on STRONG signal (tunnel starts widening) Hold while tunnel wide Exit when tunnel starts narrowing Technique 3: "Wave Analysis with Lambda" Idea: Lambda Wave EMA creates sinusoid matching market cycles Setup: Lambda Base Period: 30 Lambda Wave Amplitude: 0.5 Lambda Wave Frequency: 50 (adjusted to asset cycle) How to find correct Frequency: Look at historical cycles (distance between local highs) Average distance = your Frequency Example: if highs every 40-60 bars, set Frequency = 50 Trading: Enter when Lambda Wave at bottom of sinusoid (growth potential) Exit when Lambda Wave at top (fall potential) Combine with STRONG signals Technique 4: "Cluster Analysis" Idea: When all EMAs gather in narrow cluster = powerful breakout soon Cluster signs: All EMAs (Phi, Pi, e, Delta) within 0.5-1% of each other Gradient Clouds almost invisible Price jumping around all EMAs Trading: Identify cluster (all EMAs close) Determine breakout direction (where more volume, higher TFs direction) Wait for breakout and STRONG signal Enter on confirmation Target = cluster size × 3-5 This is very powerful technique for big moves! Technique 5: "Sigma as Dynamic Level" Idea: Sigma Composite EMA = average of all EMAs = magnetic level Usage: Enable Sigma Composite (Weighted Average) Sigma works as dynamic support/resistance Price often returns to Sigma before trend continuation Trading: In trend: Enter on bounces from Sigma In range: Fade moves from Sigma (trade return to Sigma) On breakout: Sigma becomes support/resistance Risk Management Basic Rules 1. Position Size Conservative: 1% of capital per trade Moderate: 2% of capital per trade (recommended) Aggressive: 3-5% (only for experienced) Calculation formula: Lot Size = (Capital × Risk%) / (Stop in pips × Pip value) 2. Risk/Reward Ratio Minimum: 1:1.5 Standard: 1:2 (recommended) Optimal: 1:3 Aggressive: 1:5+ 3. Maximum Drawdown Daily: -3% to -5% Weekly: -7% to -10% Monthly: -15% to -20% Upon reaching limit → STOP trading until end of period Position Management Strategies 1. Fixed Stop Method: Stop below/above Fast EMA or local extreme DON'T move stop against position Can move to breakeven For whom: Beginners, conservative traders 2. Trailing by Fast EMA Method: Each day (or bar) move stop to Fast EMA level Position closes when price breaks Fast EMA Advantages: Stay in trend as long as possible Automatically exit on reversal For whom: Trend followers, swing traders 3. Partial Exit Method: 50% of position close at +2R 50% hold with trailing by Mid EMA or Slow EMA Advantages: Lock profit Leave position for big move Psychologically comfortable For whom: Universal method (recommended) 4. Pyramiding Method: First entry on STRONG signal (50% of planned position) Add 25% on pullback to Fast EMA Add another 25% on pullback to Mid EMA Overall stop below Slow EMA Advantages: Average entry price Reduce risk Increase profit in strong trends Caution: Works only in trends In range leads to losses For whom: Experienced traders Trading Psychology Correct Mindset 1. Indicator is a tool, not holy grail Indicator shows probability, not guarantee There will be losing trades - this is normal Important is series statistics, not one trade 2. Trust the system If STRONG signal appeared - enter Don't search for "perfect" moment Follow trading plan 3. Patience STRONG signals don't appear every day Better miss signal than enter against trend Quality over quantity 4. Discipline Always set stop loss Don't move stop against position Don't increase risk after losses Beginner Mistakes 1. "I know better than indicator" Indicator says STRONG BUY, but you think "too high, will wait for pullback" Result: miss profitable move Solution: Trust signals or don't use indicator 2. "Will reverse now for sure" Trading against STRONG trend Result: stops, stops, stops Solution: Trend is your friend, trade with trend 3. "Will hold a bit more" Don't exit when STRONG signal disappears Greed eats profit Solution: If signal gone - exit! 4. "I'll recover" After losses double risk Result: huge losses Solution: Fixed % risk ALWAYS 5. "I don't like this signal" Skip signals because of "feeling" Result: inconsistency, no statistics Solution: Trade ALL signals or clearly define filters Trading Journal What to Record For each trade: 1. Entry/exit date and time 2. Instrument and timeframe 3. Signal type Golden Cross STRONG BUY STRONG SELL Death Cross 4. Indicator settings Fast/Mid/Slow EMA Base Multiplier Other parameters 5. Chart screenshot Entry moment Exit moment 6. Trade parameters Position size Stop loss Take Profit R:R 7. Result Profit/Loss in $ Profit/Loss in % Profit/Loss in R 8. Notes What was right What was wrong Emotions during trade Lessons Journal Analysis Analyze weekly: 1. Win Rate Win Rate = (Profitable trades / All trades) × 100% Good: 50-60% Excellent: 60-70% Exceptional: 70%+ 2. Average R Average R = Sum of all R / Number of trades Good: +0.5R Excellent: +1.0R Exceptional: +1.5R+ 3. Profit Factor Profit Factor = Total profit / Total losses Good: 1.5+ Excellent: 2.0+ Exceptional: 3.0+ 4. Maximum Drawdown Track consecutive losses If more than 5 in row - stop, check system 5. Best/Worst Trades What was common in best trades? (do more) What was common in worst trades? (avoid) Pre-Trade Checklist Technical Analysis STRONG signal active (BUY or SELL) All EMAs properly aligned (Fast > Mid > Slow or reverse) Price on correct side of Fast EMA Gradient Clouds confirm trend Pulsing Bar shows STRONG state Momentum % in normal range (not overheated) No close strong levels against direction Higher timeframe doesn't contradict Risk Management Position size calculated (1-2% risk) Stop loss set Take profit calculated (minimum 1:2) R:R satisfactory Daily/weekly risk limit not exceeded No other open correlated positions Fundamental Analysis No important news in coming hours Market session appropriate (liquidity) No contradicting fundamentals Understand why asset is moving Psychology Calm and thinking clearly No emotions from previous trades Ready to accept loss at stop Following trading plan Not revenging market for past losses If at least one point is NO - think twice before entering! Learning Roadmap Week 1: Familiarization Goals: Install and configure indicator Study all EMA types Understand visualization Tasks: Add indicator to chart Test all Fast/Mid/Slow settings Play with Base Multiplier on different timeframes Observe Gradient Clouds and Pulsing Bar Study Info Table Result: Comfort with indicator interface Week 2: Signals Goals: Learn to recognize all signal types Understand difference between Golden Cross and STRONG Tasks: Find 10 Golden Cross examples in history Find 10 STRONG BUY examples in history Compare their results (which worked better) Set up alerts Get 5 real alerts Result: Understanding signals Week 3: Demo Trading Goals: Start trading signals on demo account Gather statistics Tasks: Open demo account Trade ONLY STRONG signals Keep journal (minimum 20 trades) Don't change indicator settings Strictly follow stop losses Result: 20+ documented trades Week 4: Analysis Goals: Analyze demo trading results Optimize approach Tasks: Calculate win rate and average R Find patterns in profitable trades Find patterns in losing trades Adjust approach (not indicator!) Write trading plan Result: Trading plan on 1 page Month 2: Improvement Goals: Deepen understanding Add additional techniques Tasks: Study multi-timeframe analysis Test combinations with Price Action Try advanced techniques (divergences, tunnels) Continue demo trading (minimum 50 trades) Achieve stable profitability on demo Result: Win rate 55%+ and Profit Factor 1.5+ Month 3: Real Trading Goals: Transition to real account Maintain discipline Tasks: Open small real account Trade minimum lots Strictly follow trading plan DON'T increase risk Focus on process, not profit Result: Psychological comfort on real Month 4+: Scaling Goals: Increase account Become consistently profitable Tasks: With 60%+ win rate can increase risk to 2% Upon doubling account can add capital Continue keeping journal Periodically review and improve strategy Share experience with community Result: Stable profitability month after month Additional Resources Recommended Reading Technical Analysis: "Technical Analysis of Financial Markets" - John Murphy "Trading in the Zone" - Mark Douglas (psychology) "Market Wizards" - Jack Schwager (trader interviews) EMA and Moving Averages: "Moving Averages 101" - Steve Burns Articles on Investopedia about EMA Risk Management: "The Mathematics of Money Management" - Ralph Vince "Trade Your Way to Financial Freedom" - Van K. Tharp Trading Journals: Edgewonk (paid, very powerful) Tradervue (free version + premium) Excel/Google Sheets (free) Screeners: TradingView Stock Screener Finviz (stocks) CoinMarketCap (crypto) Conclusion Hellenic EMA Matrix is a powerful tool based on universal mathematical constants of nature. The indicator combines: Mathematical elegance - Phi, Pi, e instead of arbitrary numbers Premium visualization - Neon Glow, Gradient Clouds, Pulsing Bar Reliable signals - STRONG BUY/SELL work on all timeframes Flexibility - 6 EMA types, adaptation to any trading style Automation - auto-sorting EMAs, SL/TP calculation, alerts Key Success Principles: Simplicity - start with basic settings (Phi/Pi/e, Base=10) Discipline - follow STRONG signals strictly Patience - wait for quality setups Risk Management - 1-2% per trade, ALWAYS Journal - document every trade Learning - constantly improve skills Remember: Indicator shows probability, not guarantee Important is series statistics, not one trade Psychology more important than technique Quality more important than quantity Process more important than result Acknowledgments Thank you for using Hellenic EMA Matrix - Alpha Omega Premium! The indicator was created with love for mathematics, markets, and beautiful visualization. Wishing you profitable trading! Guide Version: 1.0 Date: 2025 Compatibility: Pine Script v6, TradingView "In the simplicity of mathematical constants lies the complexity of market movements"
Pine Script® indicator
by Sesilya
PA Breakout Signals (Neutral)This indicator highlights potential breakout opportunities using a price-action approach. It identifies consolidation ranges, detects breakouts above or below these ranges, and optionally confirms retests with simple candle patterns. Higher-timeframe structure (HH/HL or LH/LL) can be used as an additional directional filter. The tool plots neutral “Trigger” markers along with optional entry, stop, and target reference lines to support discretionary analysis. It does not provide trading advice and is intended only as a visual aid for chart interpretation.
Pine Script® indicator
by Shrihari78
ADR Daily Range + Volatility + KZs — SMC/ICT (@PueblaATH)ADR Daily Range + Volatility + KZs — SMC/ICT (@PueblaATH) is a complete intraday context and volatility HUD that plots market opens, killzones, previous period highs/lows, and a dynamic ADR/volatility dashboard. It is built to give SMC/ICT traders an at-a-glance view of when and where price is moving: sessions, overlaps, ranges, and distance to key levels, all on a single clean overlay. What the Indicator Does Market Opens (Tokyo, London, New York) Professional-grade session open lines with: Individually configurable open times per session and timezone. Infinite vertical lines or height-limited extensions (custom tick offsets). Fully styled labels: size, alignment, auto-background, manual background, and vertical offset. Killzones & Session Overlaps Precision-timed shaded boxes for: Tokyo Killzone London Killzone New York Killzone London–New York Overlap Previous Period Levels (PDH/PWH/PMH & PDL/PWL/PML) Robust daily/weekly/monthly high/low engine: Accurate Previous Day / Week / Month Highs & Lows (Europe/Madrid reference). Line length modes: infinite, N bars, or end-of-day projection. Per-level colors + labeled markers placed to the right of price with custom horizontal/vertical spacing. Timeframe & Weekend Filters Keep charts clean by hiding components based on: Custom timeframe ranges (hide opens or killzones on HTFs). Weekend filters for opens, killzones, and ADR/table. Optional override to display the HUD table across all timeframes. Session Comparison Table (Top-Right HUD) A compact, institutional-style session dashboard comparing: Tokyo, London, New York — current open vs previous session and previous day. Bullish/Bearish state with color-coded logic (+ optional ▲/▼ arrows). Optional Δ% change column relative to previous day’s open. ADR / Volatility Panel (24h Rolling Window) A powerful real-time volatility module providing: True 24-hour rolling high–low range. SMA-based ADR calculation with automatic bar-count safety limits. ADR% expansion metric with two thresholds + blinking color logic for volatility extremes. Directional bias vs price 24 hours ago (Bullish/Bearish). Optional metrics: distance to PDH/PDL (in price units) and absolute H–L / ADR values. How to Use It Set each session’s open time and killzone window according to your broker or desired timezone alignment. Enable or disable session opens and killzones to frame the trading windows you prioritize (e.g., LDN Killzone or NY session expansion). Activate key previous period levels (PDH/PDL, PWH/PWL, PMH/PML) and tune the line-length mode and label spacing to match your workflow. Use timeframe & weekend filters to keep higher-timeframe charts clean while maintaining precise intraday visibility on lower timeframes. Monitor the session comparison table to understand directional behavior relative to previous sessions and previous day opens. Watch the ADR panel to classify the day as compressed, normal, or expanded—and anticipate potential reversion or continuation. Originality & Credits Disclaimer This indicator is an original work by @PueblaATH , created specifically for the tool ADR Daily Range + Volatility + KZs — SMC/ICT (@PueblaATH) and distributed under the MPL 2.0 license. While the concepts implemented—session opens, killzones, ADR, and previous highs/lows—are public and widely known in the trading community, this script introduces a uniquely integrated framework that combines: Multi-timezone session scheduling with dynamic TF/weekend filtering. A modular PDH/PWH/PMH + PDL/PWL/PML engine with versatile projection and labeling controls. A precise 24-hour volatility model tied to an ADR panel with extension thresholds, blinking alerts, and distance-to-PD metrics. A multi-session comparative table that unifies Tokyo, London, and New York open data in real time. This work does not reuse or repackage code from other authors. Any future adaptations from public sources will always include full, transparent credit and documentation.
Pine Script® indicator
by PueblaATH
MultiAlgo - ScoutMultiAlgo Scout is a helper tool that shows you when market conditions are favorable and when you should stay patient. It is built to support the MultiAlgo system and works for both long and short trading. What it helps you do: Filter the current trend so you know if you should focus on longs or shorts Highlight potential entry candles and continuation candles Mark swing points and structure zones that matter for decision making Dynamically show areas where you can place your stop loss based on volatility Scout does not give buy or sell signals. It gives you clean visual guidance so you can make your own trading decisions with more confidence and consistency.
Pine Script® indicator
by multialgo
Liquidity Trend SystemThis script is a multi-strategy trading indicator. It combines several technical analysis tools into one overlay indicator to generate Buy and Sell signals. Here’s what it does: ✅ Main Purpose It analyses price action and trends using multiple methods and plots signals, targets, and alerts on the chart. The goal is to identify high-probability trade setups. 🔍 Components & Their Roles Target Trend Detects trend direction using moving averages and ATR. Draws stop-loss, entry, and three target levels on the chart. Colours candles based on trend (bullish or bearish). Plots visual signals (triangles) when trend changes. Trend Filter Applies a two-pole smoothing filter to price for trend detection. Uses rising/falling conditions to confirm trend strength. Plots a coloured line and optional signals when trend changes. Liquidity Sweeps Identifies liquidity grabs (price sweeping highs/lows). Marks wicks, outbreaks, and retests visually. Highlights zones where liquidity was taken. Candle Range Trading Detects two-candle reversal patterns: Bullish CRT (second candle bullish after bearish first). Bearish CRT (second candle bearish after bullish first). Plots markers and optional high/low box for the pattern. RBD/DBR Patterns Detects supply/demand patterns: Rally → Base → Drop (RBD) Rally → Base → Rally (RBR) Drop → Base → Drop (DBD) Drop → Base → Rally (DBR) Colours bars and plots labels for these patterns. ✅ Final Signal Logic Combines all conditions from the above strategies AND higher timeframe confirmations (HTF) Generates: Buy signal when all bullish conditions align. Sell signal when all bearish conditions align. Plots Buy/Sell labels and triggers alerts. ⚠️ Key Notes This is a confluence-based system: signals appear only when multiple strategies agree. It uses multi-timeframe analysis, which can repaint if not handled carefully. Heavy use of lines, labels, and arrays → may impact performance on lower-end devices.
Pine Script® indicator
by sukscool
DCT - Liquidity Heatmap - ProOVERVIEW This indicator visualizes liquidity levels by analyzing volume intensity, order flow structure, and price interaction. It highlights areas where buy-side and sell-side liquidity builds up, showing potential zones of interest. WHAT IT DOES - Detects buy-side and sell-side liquidity levels - Tracks swept zones - Displays volume intensity using a color-graded system - Optional CVD mode showing directional volume bias - Adapts automatically to different market types and volatility states - Extends active levels forward - Cleans up old data automatically - Includes optional alert conditions KEY FEATURES - Automatic market and volatility identification - Smart spacing and level management - Optional CVD tracking - Forward level projection - Swept level preservation - Imbalance markers - Real-time info table with liquidity stats, volatility state, and level counts - Memory-optimized handling for long charts IMPORTANT NOTES - Not a predictive tool - Not a standalone trading system - Effectiveness varies by timeframe and data quality - Optimized for crypto markets - Historical visualization shows past detected levels HOW TO USE - Add indicator to your chart - Adjust spacing to widen or tighten clusters - Enable CVD if directional pressure is needed - Configure alerts if desired - Use Compact mode on smaller screens TECHNICAL DETAILS - Pine v6 - Overlay: true - Max boxes: 500 - Memory optimized - Works on Perpetual and Spot crypto markets DISCLAIMER For analysis and educational use only. No financial advice. Markets can behave unpredictably. Use your own judgment and risk management.
Pine Script® indicator
by Daily-Crypto-Trading
Smart MA Crossover█ OVERVIEW "Smart MA Crossover" is a technical analysis indicator designed to enhance the effectiveness of strategies based on MA crossovers, combining classic moving average crossovers with breakouts from boxes and dynamic trend visualizations. The indicator is fully customizable—you can freely adjust both parameters and graphical elements. █ CONCEPTS Trading approaches based solely on moving average crossover moments generate a large number of false signals. Smart MA Crossover was created to improve this statistic. That's why boxes are added, which are formed from the candle where the MA crossover occurred and generate signals only upon breakout from them. The boxes have bullish (green) and bearish (red) colors. By default, the show_only_matching filter is enabled, displaying entry signals only when the breakout direction matches the box color (e.g., only upward for a bullish box). Boxes are by default the size of the candle on which the crossover occurred, but their size can be adjusted to suit your strategy via an optional average candle size multiplier. █ FEATURES - Moving Averages: Two configurable MAs (fast_length, default 10; slow_length, default 30) with selectable type (SMA, EMA, WMA, HMA, VWMA). Optionally displayed with gradient fill between them (color depends on trend: green for uptrend, red for downtrend). - MA Gradient and Candle Coloring: Enable gradient fill between MAs (transparency: gradient_opacity, default 85) and dynamic candle coloring based on trend (green/red). - Fog Gradient Trend: Multi-layered gradient "fog" around hl2, consisting of 5 levels up and down, with offset based on average candle size (offset_mult, default 0.7) and increasing transparency (base_transp, default 80; transp_inc, default 4). Fog colors are dynamic (green/red). - Breakout Boxes: Created at the moment of MA crossover, extending to the right. Box height optionally multiplied by average candle size (use_box_multiplier, box_multiplier, default 1.0). Boxes close and generate a signal when price breaks out beyond the top/bottom edge. Signals: - Triangles: Green downward triangles (buy breakout) below the bar, red upward triangles (sell breakout) above the bar—only on breakouts matching direction (if show_only_matching = true). When the matching filter is disabled, every box generates a signal based not on the MA crossover, but on the breakout direction. - Labels: “BUY” (green, below bar) and “SELL” (red, iabove bar) with transparent background (transparency 40). - Matching Filter: The show_only_matching option limits signals to breakouts consistent with box direction (bullish box → only buy, bearish → only sell). - Visualization: Gradient MA lines, fill between MAs, multi-layered fog with increasing transparency, boxes with transparent background (85) and colored borders, dynamic trend colors. - Alerts: Built-in alerts for BUY and SELL signals (with message including ticker and timeframe). █ HOW TO USE Add to Chart: Apply the indicator via Pine Editor or the Indicators menu on TradingView. Configure Settings: - MA Settings: Adjust fast (fast_length, default 10) and slow (slow_length, default 30) MA lengths and type (ma_type, default SMA). - Visualization: Enable/disable MA lines (show_ma_lines), MA gradient (use_gradient_ma), fog trend (show_fog), candle coloring (color_candles). - Boxes and Breakouts: Enable candle size multiplier (use_box_multiplier) and set value (box_multiplier, default 1.0). Enable signal filter (show_only_matching). - Signals: Choose type (signal_type): Triangles or Labels (Buy/Sell). - Fog Trend: Adjust offset (offset_mult), base transparency (base_transp), and increment (transp_inc). Select trend colors (col_up, col_dn). Signal Interpretation: - Buy Signals: Green triangles below the bar or “BUY” label—on upward breakout from a bullish box (after bull cross). - Sell Signals: Red triangles above the bar or “SELL” label—on downward breakout from a bearish box (after bear cross). - Fog and Gradient: green fog/fill = uptrend; red = downtrend. - Boxes: Active boxes indicate potential breakout zones; their closure confirms the move. Signal Confirmation: Use with other tools, such as support/resistance levels, volume, or additional MAs to filter false crossovers. █ APPLICATIONS - MA Cross Strategies: Replace classic crossovers—boxes and breakouts eliminate many false signals, thereby increasing effectiveness. Confirm with other indicators, e.g., RSI, Fibonacci, FVG, pivot levels. - Trend Following: Can be used as a classic trend indicator, especially with larger MA values. █ NOTES - Test the indicator across different timeframes and assets, adjusting MA lengths and box multiplier to market volatility. - In consolidating markets, the indicator generates more false signals.
Pine Script® indicator
by Uncle_the_shooter
6
Top-line % MovesOverview A clean, text-only overlay that shows price momentum at a glance. It prints one line at the top-center of your chart: Movement | Day % | 3-Day % | Wk % What it shows Day - Percent change from today’s regular-session open to the latest price 3-Day - Percent change from the daily open 3 trading days ago Wk - Percent change from the daily open 5 trading days ago How it works Pulls daily opens via request.security so it stays consistent across intraday and daily timeframes Calculates percent moves versus those opens and renders a single centered text line Transparent background, bright white text, no bars or lines, minimal chart footprint Notes “Wk” uses 5 trading days. If you prefer 7 calendar days, change the lookback to your preference Daily opens follow the symbol’s TradingView session settings. Extended or 24h markets may differ from your broker’s definition of “open” Best for Quick momentum read without clutter Screeners, streaming layouts, and compact dashboards Inputs None Tags percent change, overlay, momentum, daily open, intraday, text display, minimal, Pine v6
Pine Script® indicator
by EVerzub30
Liquidity Sweeps + Swing High/Low — SMC/ICT (@PueblaATH)Liquidity Sweeps + Swing High/Low — SMC/ICT (@PueblaATH) is a liquidity-driven Smart Money Concepts tool that automatically maps out key swing highs and lows, tracks how they evolve into liquidity pools, and highlights when those levels are swept and either respected or invalidated. This indicator is built to give traders a clean, event-driven view of stop runs and liquidity grabs across any timeframe, from scalping to higher-timeframe context. What the Indicator Does Swing Structure & Liquidity Pools Detects swing highs and lows using a configurable swing length, projects levels forward in time, and builds a liquidity-pool database through pivot arrays used for sweep detection. Liquidity Sweeps (Stop Runs) Identifies bearish (upward) and bullish (downward) sweeps through prior liquidity levels using three modes: Any Touch, Wick + Close Back, and Retest Rejection. Each sweep can generate projective lines, labeled markers, and alerts. Scope, Rate Limiting & Clean Visuals Controls minimum spacing between swings and sweeps, limits sweep duplication, auto-revokes invalidated sweeps, and restricts the maximum number of visible events. Smart offset logic reduces label overlap and keeps charts clean even in dense price action. Timeframe Filters & Utilities Allows hiding all drawings between specific timeframes and optionally skipping calculations or clearing internal state when hidden. Includes debug pivot markers and an optional TF/Bucket badge. Timeframe Auto-Mode (Original Adaptive Engine) This indicator features a fully original, seven-bucket Auto-Mode engine that adapts sensitivity to the active timeframe. Bucket Classification (by seconds) ≤1m, >1m–15m, >15m–30m, >30m–1h, >1h–4h, >4h–1d, >1d. Bucket-Specific Settings Each bucket has unique sensitivity sets: Swing/Sweep lengths Projection distances Line style and width Rate-limiting gaps Pivot count and bar-lookback windows Overlap windows Adaptive Behavior Lower timeframes gain more reactive behavior, while higher timeframes apply smoother and more selective filters. Manual Override Auto-Mode can be disabled to use the Core manual settings for full customization. How to Use It Attach the indicator and choose whether to keep Auto-Mode ON or OFF. Select the sweep mode (e.g., Wick + Close Back for ICT-style liquidity grabs). Adjust label text, size, color, and offsets to your preference. Use timeframe filters to show drawings only where you want them. Enable alerts for bullish sweeps, bearish sweeps, or revocations. Combine sweep events with your own confluence (sessions, bias, OBs/FVGs, etc.). Originality & Credits Disclaimer This script is an original work by @PueblaATH , created specifically for Liquidity Sweeps + Swing High/Low — SMC/ICT (@PueblaATH) under the MPL 2.0 license. The concepts used (swing highs/lows, liquidity pools, sweeps, SMC/ICT behavior) are public and widely known—they do not belong to any author or protected script. This indicator does not repackage or cosmetically modify existing code. Its architecture—including the multi-bucket Auto-Mode engine, pivot/sweep management system, revocation logic, overlap-aware labeling, and TF-based hide/skip/clear controls—is uniquely implemented for this script. If any future update reuses or adapts code from public sources, full credit will be given in both comments and description, with clear explanation of what was reused and what was originally added or improved.
Pine Script® indicator
by PueblaATH
VWAP D/W/M + MA100 & EMA100 albanThis TradingView indicator displays three independent VWAPs (Volume Weighted Average Prices) along with MA100 (Simple Moving Average) and EMA100 (Exponential Moving Average) on the chart. Key Features: VWAP #1, VWAP #2, VWAP #3: Each VWAP can be configured independently with: Source (hlc3, close, etc.) Anchor period (Session, Week, Month, Quarter, Year, Decade, Century, Earnings, Dividends, Splits) Offset Option to hide on daily or higher timeframes MA100: 100-period Simple Moving Average EMA100: 100-period Exponential Moving Average Purpose: This script is ideal for traders who want to track multiple VWAP levels simultaneously while also monitoring the 100-period moving averages for trend analysis. It provides a clean setup without bands or fills, focusing solely on price averages. Use Cases: Identify intraday or multi-timeframe VWAP levels Combine VWAP levels with MA100/EMA100 for support/resistance analysis Analyze trend direction and momentum using moving averages
Pine Script® indicator
by FarK_OBVS
ProChart NF50 1H📘 Nifty 50 – 1 Hour Options Trading Indicator (By- Dr Bean) This indicator is designed specifically for Nifty 50 Index on the 1-hour timeframe, optimized for options trading (For Call entries based on index direction). It automatically identifies high-probability Buy and Sell signals, using a combination of trend structure, volatility filters, and momentum logic. The goal is to capture clean directional moves with controlled risk. 🔍 What the Indicator Does ✅ 1. Generates Buy & Sell Signals Buy signal appears when the trend flips bullish and volatility confirms the momentum. Sell signal appears when upward momentum weakens and reversal logic triggers. This helps option traders decide when to enter CE (Call) or Exit positions with better timing. 📈 Example of Signals on Chart The chart shows: Buy signals at early trend stages Sell signals when momentum weakens Take-Profit markers based on trailing logic Trend structure lines to visualize the move This makes spotting trend continuation and reversal trades extremely simple. 📊 Backtested Performance Based on historical Nifty 50 (1-hour timeframe): (On 14/11/2025) Total Trades: 329 Win Rate: 51.67% Profit Factor: 1.83 Largest Win: ₹944.05 Largest Loss: –₹307.15 Average R Multiple: 0.46 Max Win Streak: 7 Max Loss Streak: 6 These stats show high reward-to-risk stability, with controlled losses and strong upside streaks. 🎯 Why This Indicator Works Well for Options Nifty 50 moves cleanly on higher timeframes 1-hour candles reduce noise Signals are not overly frequent Momentum and ATR-based filters help avoid choppy markets Easy visual signals help traders take CE decisions confidently This indicator is ideal for: Intraday & Swing Options Traders Traders who prefer rule-based signals Nifty Index direction traders 💡 Overall Purpose This tool simplifies the process of identifying: Trend continuation Momentum breakouts Profit-taking zones Early reversals It helps option traders take trades based on clear, objective, visual signals, instead of guesswork. ⏱️ Recommended Timeframe: Optimized for 1-Hour Charts 💬 Note : This is a paid indicator. Access is granted upon subscription. For inquiries, trial access, or support, please contact us directly via TradingView or our official social channels. Market Risk Applies – All trading involves risk. Always use proper risk management and never rely solely on any single indicator for trading decisions. Backtesting Recommended – Before live trading, test this indicator on past data and in simulated environments to understand its behavior and limitations. Disclaimer : We and our private indicator are not registered with SEBI (India), the SEC (U.S. Securities and Exchange Commission), or any other financial regulatory authority. The information provided is purely for educational and informational purposes and does not constitute financial or investment advice. Please consult a registered financial advisor before making any investment decisions.
Pine Script® indicator
by Dr_Bean
GMH : Tech Bubble Good Morning Holding Simulating How to Ride the Bubble — and Jump Out Before the Crash Be careful! Most simulation results show that this strategy sometimes underperforms a simple buy-and-hold, because it gives away positions during deep retracements and buys back at higher thresholds. Humans often struggle with cutting losses. When the pain becomes too much, they lose the confidence needed to execute even a reasonable strategy. But in terms of mentality, this approach reduces long-term portfolio volatility. It helps investors feel more at peace, especially during real market crashes like the tech bubble in 2021. How to use : Select TimeFrame 4HR on trading view
Pine Script® strategy
by gmhfund
Adaptive Trend & Momentum [ATM] - All-in-One Confirmation Tired of Cluttered Charts and Conflicting Signals? This All-in-One Indicator is Your Solution. The Adaptive Trend & Momentum (ATM) indicator is a powerful, next-generation trading tool designed to eliminate chart clutter and provide clear, high-conviction signals. Instead of using multiple conflicting indicators, the ATM system combines trend, momentum, and volatility into a single, cohesive, and adaptive framework. It automatically adjusts to changing market conditions, giving you a reliable edge in any environment. This is not just another moving average crossover. It is a complete trading system that helps you identify the trend, confirm its strength, and time your entries with precision. Key Features • Adaptive Moving Average (AMA): The core of the system. The AMA automatically adjusts its length based on market volatility (using the Average True Range). It becomes faster and more responsive in volatile markets to catch moves early, and smoother in calm markets to avoid noise and false signals. • Dynamic Volatility Bands: These bands expand and contract based on market volatility, providing a dynamic map of support and resistance. They are crucial for identifying pullback opportunities and setting effective stop-loss levels. • Integrated Momentum Oscillator: A smoothed RSI-based oscillator that runs in a separate pane. It is designed to confirm the signals from the main chart. The oscillator and its histogram are color-coded to show whether bullish or bearish momentum is in control, giving you an instant read on market strength. • Clear Consensus Signals: The ATM indicator provides four distinct, easy-to-read signals directly on your chart: • STRONG BUY: The highest-conviction signal, appearing when the trend is bullish, momentum is bullish, and the price has pulled back to a strategic entry zone near the AMA. • BUY: A standard confirmation signal when both trend and momentum are aligned to the upside. • STRONG SELL: The highest-conviction short signal, appearing when the trend is bearish, momentum is bearish, and the price has rallied to a strategic entry zone. • SELL: A standard confirmation signal when both trend and momentum are aligned to the downside. • Real-Time Dashboard: A convenient on-chart table that provides a complete overview of the market at a glance. It shows the current adaptive length, trend direction, momentum status, consensus signal, and volatility percentage, so you always know what the indicator is thinking. How It Works: The Adaptive Engine The magic of the ATM indicator lies in its adaptive engine. Traditional moving averages use a fixed length (e.g., 50-period MA), which can be too slow in a fast market or too sensitive in a choppy one. The ATM’s Adaptive Moving Average solves this by dynamically adjusting its calculation period in real-time: When volatility increases, the AMA shortens its length to react more quickly to price changes. When volatility decreases, it lengthens its period to smooth out noise and prevent false signals. This adaptive nature ensures that the indicator remains relevant and effective across different assets and timeframes, from scalping to swing trading. How to Use This Indicator: A Simple Trading Strategy The ATM indicator is designed for clarity and ease of use. Here is a basic framework for trading with it: For Long (Buy) Positions: 1. Identify the Trend: Wait for the Adaptive Moving Average (AMA) line to turn green, indicating a confirmed uptrend. 2. Confirm with Momentum: Check that the momentum oscillator is above 50 and preferably rising, confirming bullish strength. 3. Find Your Entry: The best entry is a "STRONG BUY" signal. This tells you that the price has pulled back to a value area within the uptrend, offering a high-probability entry. A standard "BUY" signal can also be used, but the conviction is higher on "STRONG" signals. 4. Set Your Stop-Loss: A logical place for a stop-loss is just below the lower volatility band. 5. Take Profit: Consider taking profits when an opposing "SELL" or "STRONG SELL" signal appears, or when the price reaches a key resistance level. For Short (Sell) Positions: 1. Identify the Trend: Wait for the Adaptive Moving Average (AMA) line to turn red, indicating a confirmed downtrend. 2. Confirm with Momentum: Check that the momentum oscillator is below 50 and preferably falling, confirming bearish strength. 3. Find Your Entry: The best entry is a "STRONG SELL" signal. This indicates the price has rallied to a resistance area within the downtrend, offering a prime shorting opportunity. A standard "SELL" signal can also be used. 4. Set Your Stop-Loss: A logical place for a stop-loss is just above the upper volatility band. 5. Take Profit: Consider taking profits when an opposing "BUY" or "STRONG BUY" signal appears, or when the price reaches a key support level. Customization and Settings The indicator is fully customizable to fit your trading style and the asset you are trading. You can adjust: • AMA Settings: Control the base length and the volatility multiplier to make the indicator more or less sensitive. • Momentum Settings: Adjust the RSI length and smoothing for the oscillator. • Volatility Bands: Change the multiplier to widen or narrow the bands. • Visuals: Toggle signals, labels, and the dashboard on or off, and customize all colors to your preference. Summary The Adaptive Trend & Momentum (ATM) indicator is more than just a tool; it is a complete system for making more confident trading decisions. By adapting to the market and combining trend, momentum, and volatility, it provides a clear, uncluttered, and powerful view of price action. Add it to your chart today and experience the clarity of adaptive trading! Disclaimer: This indicator is a tool for technical analysis and should not be considered financial advice. Trading involves risk, and you should always use proper risk management. Past performance is not indicative of future results. Practice on a demo account before trading with real capital. Keywords: Adaptive, Moving Average, Trend, Momentum, Volatility, RSI, Bands, Signal, Confirmation, All-in-One, System, Strategy, ATR, Volatility, Dashboard, Alert
Pine Script® indicator
by raniaesmael4
Liquidity Void Detector + Pro SignalsWhat This Indicator Does This indicator detects “liquidity voids”—large displacement candles with very high body-to-wick ratios and size significantly above recent ATR—where price moved rapidly and left untested areas. It automatically draws shaded boxes for new, non-overlapping voids, shows a moveable dashboard (void fill probabilities), and provides one clean, actionable long/short signal per void when price action and momentum confirm. How It Works Void Detection: Candles with a body/wick ratio and size above user threshold trigger a potential liquidity void. Box Drawing: Each new void is drawn as a shaded box (yellow/orange) that never overlaps other active voids. Signal Confirmation: A “LONG” or “SHORT” label appears at the first bar within each valid void if momentum and candlestick structure align. Dashboard: User-selectable dashboard shows up-to-date stats on remaining unfilled, partially filled, and fully filled voids. Alerts: Built-in alerts fire when a new high-probability long/short signal is detected (user must add alerts manually). Key Features No overlap, no clutter: Only the latest set of boxes and a single signal per event are drawn. Oldest boxes are pruned automatically. Momentum filter: Signals combine void and trend strength for higher conviction, filtering out weak/fake moves. Non-repainting: Signals, boxes, and logic only use confirmed bar data—no repaint or future leaks. Adjustable settings: Every threshold (body/wick ratio, ATR size, maximum boxes, dashboard location, signal label size) is user-configurable. Efficient for all timeframes and asset classes. How to Use Add to your chart: Click "Add to Chart" or search “Liquidity Void Detector” in the indicator search panel. Tune your inputs: Adjust the Body/Wick Ratio and Min Size vs ATR for your market or timeframe. Set the Void Box Length (how many bars the box displays), signal sensitivity, and maximum concurrent voids. Move the dashboard as needed for your chart layout. What to look for: Yellow/orange boxes highlight recent liquidity voids—untested price gaps where future reactions may occur. LONG/SHORT signals appear only where a fresh void coincides with confirmed momentum in that direction. Dashboard tracks probability of voids remaining unfilled, being partially filled, or fully refilled by price. Trading logic and best use: Traders may use void boxes to anticipate where price might react, reverse, or trend continuation can resume. Combine signals with additional price action confirmation such as S/R levels, order blocks, wick rejections, volume spikes, or patterns (e.g., pin bars, engulfing). Use signal alerts in conjunction with order flow, session profile, or support/resistance tools for increased confluence. Always backtest and demo trade before live use. Important Compliance & Disclaimer No advice: This tool provides visual context only. All trading and risk decisions are the user’s responsibility. No repainting, original source: The code is fully open-source, uses only native Pine Script, and never repaints. No spam, no links, no 3rd-party promotion: 100% TradingView House Rules compliant. If you find this useful, please consider leaving a positive review, and remember to always confirm with your own analysis.
Pine Script® indicator
by darshakssc
Nadaraya-Watson: Rational Quadratic Kernel (Opening Gap Shift)What we did to fix it: We didn't throw out the old data (that made it too jumpy early in the day). Instead, we "tricked" the kernel by shifting all the previous day's prices up or down by the exact gap amount (e.g., if it gapped up 50 points, add 50 to every old price point). This makes the history "line up" with the new day's starting level. Created so with a fresh session the Nadaraya-Watson Regression Kernel is relevant from the get go - no catch up on opening gaps. All credit to jdehorty his full description is below. What is Nadaraya–Watson Regression? Nadaraya–Watson Regression is a type of Kernel Regression, which is a non-parametric method for estimating the curve of best fit for a dataset. Unlike Linear Regression or Polynomial Regression, Kernel Regression does not assume any underlying distribution of the data. For estimation, it uses a kernel function, which is a weighting function that assigns a weight to each data point based on how close it is to the current point. The computed weights are then used to calculate the weighted average of the data points. How is this different from using a Moving Average? A Simple Moving Average is actually a special type of Kernel Regression that uses a Uniform (Retangular) Kernel function. This means that all data points in the specified lookback window are weighted equally. In contrast, the Rational Quadratic Kernel function used in this indicator assigns a higher weight to data points that are closer to the current point. This means that the indicator will react more quickly to changes in the data. Why use the Rational Quadratic Kernel over the Gaussian Kernel? The Gaussian Kernel is one of the most commonly used Kernel functions and is used extensively in many Machine Learning algorithms due to its general applicability across a wide variety of datasets. The Rational Quadratic Kernel can be thought of as a Gaussian Kernel on steroids; it is equivalent to adding together many Gaussian Kernels of differing length scales. This allows the user even more freedom to tune the indicator to their specific needs. The formula for the Rational Quadratic function is: K(x, x') = (1 + ||x - x'||^2 / (2 * alpha * h^2))^(-alpha) where x and x' data are points, alpha is a hyperparameter that controls the smoothness (i.e. overall "wiggle") of the curve, and h is the band length of the kernel. Does this Indicator Repaint? No, this indicator has been intentionally designed to NOT repaint. This means that once a bar has closed, the indicator will never change the values in its plot. This is useful for backtesting and for trading strategies that require a non-repainting indicator. Settings: Bandwidth. This is the number of bars that the indicator will use as a lookback window. Relative Weighting Parameter. The alpha parameter for the Rational Quadratic Kernel function. This is a hyperparameter that controls the smoothness of the curve. A lower value of alpha will result in a smoother, more stretched-out curve, while a lower value will result in a more wiggly curve with a tighter fit to the data. As this parameter approaches 0, the longer time frames will exert more influence on the estimation, and as it approaches infinity, the curve will become identical to the one produced by the Gaussian Kernel. Color Smoothing. Toggles the mechanism for coloring the estimation plot between rate of change and cross over modes.
Pine Script® indicator
by Maximilianned