Black FridayUp to 80% OFF

Moving Averages

Trend-Adaptive 3-Band Reversal CloudThis indicator plots a trend-adaptive, volatility-based 3-band cloud on your chart to visually contextualize potential high-probability reversal, balance, and exhaustion price zones — all in strict alignment with TradingView’s house rules and best compliance practices. How It Works Trend Detection: The script determines short-term trend direction using two adjustable EMAs (fast and slow). When the fast EMA is above the slow, the environment is classified as an uptrend; when below, as a downtrend. Adaptive Bands and Clouds: Around the dynamic trend baseline, three cloud “bands” are drawn using multiples of an ATR (Average True Range) volatility filter, automatically adjusting for evolving market conditions: Middle Band (Fair Value Zone): Area around the baseline, where price is statistically balanced. Upper Outer Band: In an uptrend, this shows a potential 'exhaustion/overextension' area; in a downtrend, it can act as a deep pullback or reversal area. Lower Outer Band: In an uptrend, this highlights a possible 'deep pullback/reversal' area; in a downtrend, it becomes the potential exhaustion zone. Contextual RSI Markers: When price is in one of the outer bands and RSI is overbought (upper) or oversold (lower), a tiny diamond marker appears on that band as extra context — offering a visual cue for a possible high-momentum exhaustion or deep reversal zone, but never a trade signal or advice. Visuals and Compliance: All cloud regions use three different, semi-transparent colors for easy reading, and never block price action. Labels indicate only “Possible Exhaustion,” “Deep Pullback Zone,” and “Balanced/Fair Value”—the language is strictly neutral and descriptive. All calculations run only on confirmed, historical bars with zero repainting, no future bar lookahead, and no predictive overlays. How to Use Add to Chart: Simply add the indicator to any chart and timeframe. Configure: Adjust the EMA, ATR, and RSI settings via the input panel to best fit your instrument and preferred sensitivity. Choose band multipliers to widen or contract the cloud according to volatility or your system. Toggle RSI marker/context highlighting as desired. Interpretation: Middle Cloud (“Balanced/Fair Value”): Price in this zone suggests mean reversion, equilibrium, or fair pricing for the session’s volatility/trend conditions. Outer Clouds: If price reaches an outer cloud, pay attention for potential mean-reversion (if trend persists) or exhaustion zones (especially if a diamond appears). Uptrend: Lower cloud is where larger pullbacks/reversals are often initiated; upper cloud indicates potential trend exhaustion. Downtrend: Upper and lower clouds are reversed in interpretation. Diamond Markers: A red diamond atop the upper band signifies RSI overbought; a lime diamond below the lower band shows RSI oversold. These do not recommend trading—only highlight increased likelihood that buyers/sellers may be overextended. Best Practices: Do not use the indicator in isolation or as a signal generator. Combine its context with price action confirmation, volume, or other non-repainting tools. Use labels only for navigation/context, never as actionable advice. Technical Details Inputs/Customization: Fully adjustable (EMAs, ATR period, band multipliers, RSI thresholds, label/marker toggles). Logic: All code processes only historical closed bars and overlays information in real time. No repaint, strategy, or alerts: No signals, no script-driven trading, and no claims of prediction or guaranteed probability. House-rule Clean: The script and its visuals are compliant with TradingView’s publishing requirements, both visually and textually. Summary: This tool is designed for traders who want to visually frame high-probability reversal, equilibrium, and exhaustion zones adaptively—while keeping price action primary and avoiding visual or conceptual clutter. Use it to better understand where price may statistically find resistance/support or revert, not to automate signals or guarantee outcomes
Pine Script® indicator
by darshakssc
Multi-Timeframe Trend MA&BB Suite: 6x Moving Averages by Jenn.ioMulti-Timeframe Trend MA & BB Suite: 6x Moving Averages + 5x MTF View by Jenn.io Indicator Overview This indicator is a comprehensive, all-in-one trend and volatility tool designed for traders who rely on Moving Averages (MAs) and Bollinger Bands (BBs). It stands out by allowing users to plot up to six fully customized MAs on the current chart, while simultaneously projecting the values of those same MAs from up to five higher timeframes (MTF). It's the essential tool for top-down analysis and identifying high-probability confluence zones. Key Features and Customization 1. The Core: 6x MAs and Bollinger Bands: six Independent MAs: Plot up to six separate Moving Averages on your current chart. Each MA is fully customizable in terms of: Type: Choose from SMA, EMA, SMMA (RMA), WMA, or VWMA. Source and Length: Set the calculation source (Close, Open, etc.) and the lookback period. Style: Customize color, thickness, and line style (Solid, Dashed, Dotted). Integrated Bollinger Bands (BB): Includes standard Bollinger Bands with customization for length, standard deviation, MA type, and the option to enable or disable the band fill color. 2. Advanced: Multi-Timeframe (MTF) Projection a. 5x MTF Timeframes: The user can enable and fully customize up to five distinct higher timeframes (e.g., Daily, Weekly, Monthly, 4H, 15m). b. Dynamic MTF Visualization: The indicator fetches the value of the 6 MAs from these higher timeframes and displays them on the current chart using one of three customizable modes: Extended Mode: Projects the MTF MA value as a continuous line extending to the right, simulating where the MA is moving on the higher chart. Floating Segment: Draws a short, visible line segment near the current price action, showing the MA value without cluttering the whole chart. Floating Label: Displays the MA value as a text label anchored to the right of the current bar, providing clean, non-obtrusive data. Recommended Usage 1. MTF Confluence: Look for instances where the MTF MA lines align closely with the MAs or BBs of your current timeframe. These areas represent strong support/resistance zones. 2. Trend Filter: Use the Extended Mode MTF lines to quickly determine the higher-timeframe trend without changing your chart. For example, if the Daily 200 EMA is above the current price, the bias is bearish. 3. Precision Entries: Use the Floating Label Mode to see the precise MA value from a higher timeframe. This is useful for placing limit orders near key structural levels.
Pine Script® indicator
by Jenn_io
ID Candle Body % Star Rating + SMC ToolkitThis tool combines strong-body candle detection, trend analysis, SMC-based setups, session levels, VWAP, Donchian Channels and live alerts. It’s built to help you read momentum, structure and volatility on any intraday chart. 1. Strong Body Candle Detection The script highlights candles with exceptional bodies using three conditions: • Body is larger than the previous five candles • Body makes up more than 85% of the entire candle • Both conditions happening at the same time These signals help you spot strength or exhaustion in real time. 2. EMA Trend Layer Three EMAs (50/100/200 by default) plot the overall trend. When enabled, the area between the fast and slow EMAs fills with a soft color to show bullish or bearish bias at a glance. 3. Bullish and Bearish Setup (ICT-style patterns) The indicator marks classic two-candle continuation setups: • Bullish setup with a break above the previous high and an FVG • Bearish setup with a break below the previous low and an FVG You can also enable “low break” and “high break” variations to track liquidity sweeps. Each setup has its own alert option. 4. Four Key Market Sessions The script plots Asia Open, Midnight Open, London Open and New York Open. Each session shows: • A real-time box • High, low and midpoint • Optional extended lines projecting forward These levels often act as reaction zones on lower timeframes. 5. VWAP With Optional Bands You can anchor VWAP to the session, week, month, quarter or year. Bands can be calculated using standard deviation or a percentage. There’s also an option to hide VWAP on higher timeframes. 6. Donchian Channel A classic 20-period DC is included to provide an additional structure reference for breakouts and trend ranges. 7. Real-Time Alerts Alerts trigger only once per bar and cover: • Bullish setup • Bearish setup • Liquidity sweep variations • VWAP star-rating (if enabled in the code block) Great for traders who monitor multiple pairs.
Pine Script® indicator
by ssworld
Nifty SMC S&R MA and All Indicator[SumitQuants]🇮🇳🔥 **Nifty SMC S&R + MA + VWAP + Order Flow Suite ** Built for Indian Markets • Tuned for NIFTY, BANKNIFTY & NSE Stocks A complete institutional-grade trading system crafted for Indian traders who want a serious edge using Smart Money Concepts, Market Structure, Support–Resistance Strength, VWAP, Breakout Logic & Trend Tools — all combined into ONE ultra-optimized indicator. 🧠 Why This Indicator Stands Out Most indicators only show price. This one shows intent — clear, confident, and easy to read. It reveals: ➡ where institutions are active ➡ where liquidity is sitting ➡ where real strength is building ➡ and who is actually in control — buyers or sellers This is how professional desks read the markets — and now you can too. 🔥 What’s Inside (Complete Feature Stack) 🟧 1. Support–Resistance Strength Engine (Buyer/Seller Strength %) Your built-in market power meter: 🟦 Auto S/R zones 🟩 Buyer vs Seller Strength % 🟨 Strength boxes with clean visuals 🔁 Live reactions when price taps strong or weak zones Perfect for timing entries, reversals, retests and trap-detections in NIFTY & BANKNIFTY. 🟩 2. Smart Money Concepts (Full SMC Suite) A complete institutional SMC system: ✔ BOS / CHoCH (Internal + Swing) ✔ Market Structure in real time ✔ Internal & Swing Order Blocks ✔ Strong / Weak Highs & Lows ✔ Equal High / Equal Low (EQH/EQL) ✔ Fair Value Gaps (FVG) ✔ Trend Bias Coloring ✔ Premium / Discount Zones Every element is built for clarity — high-quality visuals without chart clutter. 📈 3. Moving Average Suite (5 Fully Custom MAs) Elegant MA system for trend confirmation: ✨ EMA ✨ SMA ✨ SMMA ✨ WMA ✨ VWMA Beautiful colors, clean visibility, and completely optional — enable only what you need. ⚡ 4. Enhanced Supertrend System A modern Supertrend built for actual usability: 🎨 3 display styles (Line / Histogram / Ghost Mode) 🔄 Clear trend-change signals 🌗 Background trend zones ⚡ No repaint ⏰ Alerts for every reversal Ideal for intraday momentum and bias confirmation. 📉 5. Breakouts with Volume Confirmation Stops you from getting trapped in fakeouts: 🔥 Support Break 🔥 Resistance Break 🟦 Bullish Rejection 🟥 Bearish Rejection 📈 Volume-validated breakouts 📊 Smooth visual labels for clean execution Ultra useful for NIFTY/BANKNIFTY’s typical stophunt → reversal patterns. 🎯 6. VWAP System with Multi-Band Zones Professional VWAP for Indian markets: ✔ Session VWAP ✔ Weekly VWAP ✔ Monthly VWAP ✔ Premium–Discount Zones ✔ Expansion vs Mean-Reversion levels ✔ Clean visual bands Perfect for intraday scalping & morning session planning. 🔔 7. Full Alerts Framework Included Get notified for all key institutional events: 🚨 BOS / CHoCH 🚨 Order Block Breakouts 🚨 Equal High/Low 🚨 Fair Value Gaps 🚨 Trend Changes 🚨 Breakouts 🚨 Swing / Internal Structure Events Never miss a major shift again — even when away from charts. 🧽 8. Clean UI + Auto Watermark 🖤 Dark/Light mode optimized 🧊 Smooth spacing ✨ Minimalistic visuals 🔍 Zero chart clutter ⚡ High-performance A premium interface built for Indian index trading. 🧪 Who Is This Built For? ✔ Intraday F&O Traders ✔ NIFTY & BANKNIFTY Scalpers ✔ Swing Traders ✔ Price Action + SMC Traders ✔ VWAP-Based Scalpers ✔ Anyone wanting a complete premium system in a single indicator ⚡ Why Indian Traders Love It ⚡ Captures Nifty morning trap zones ⚡ Predicts London session expansions ⚡ Warns about NY reversal pressure ⚡ Identifies true institutional footprints ⚡ Shows real strength behind S/R zones ⚡ Eliminates false breakouts ⚡ Gives bias, structure & context instantly This is not just an indicator — It’s a full institutional trading framework. 🛒 Get Full Access This indicator is available exclusively inside the Courses section on the official website. 👉 Purchase & Access: www.ironmindtrader.com Inside the course: 🔧 Installation Steps ⚙️ Recommended Settings 📘 Trading Logic 🔄 Lifetime Updates Included
Pine Script® indicator
by SumitQuants
SMC S&R MA Market Vol All Indicator[SumitQuants]🚀 SMC S&R + Market Sessions + Volume Profile + Order Flow Suite The Only All-In-One Institutional Trading System You’ll Ever Need. Looking for an indicator that actually brings clarity to chaotic markets? Meet the SMC S&R MA Market Volume & Sessions Order Flow System — a powerhouse that fuses Smart Money Concepts, Session Profiles, and Dynamic Volume Flow into one ultra-optimized institutional toolkit. This is not “just another SMC indicator.” This is your complete trading ecosystem. 💠 What This Indicator Does (In Simple Terms) It automatically reads the market the way institutions do — and displays it cleanly on your chart with zero clutter. Below is everything packed inside 👇 🔥 1. Market Sessions + Volume Profile (Real Institutional Map) ✔ Tokyo- Asia | London- Europe | New York- US sessions auto-detected ⏱️ ✔ Each session gets its own Volume Profile 📊 ✔ See POC, VAH, VAL, Value Area Box for each session ✔ Live Developing Profile in real-time ✔ Wick-based and body-volume distribution for ultra-accurate auctions ✔ Session Boxes that highlight imbalance zones ✔ Perfect for: High-volume Asia breaks London volatility expansion NY reversal traps 👉 Think of it as having pro-level TPO/Volume Profile inside TradingView. 🎯 2. Advanced S&R Strength Engine (Buyer vs Seller Power Meter) ✔ Detects strongest Support & Resistance zones ✔ Measures Buyer Strength & Seller Strength (% based) ✔ Auto-plots S/R Lines + S/R Zones ✔ Detects Bounce signals, Rejection points, Pressure shifts ✔ Zero repaint logic You get institutional footprints directly on your chart. 📈 3. Smart Money Concepts (Full Automation) ✔ BOS / CHoCH detection ✔ Internal + Swing Structure ✔ Order Blocks (Internal + Swing) ✔ Equal Highs & Equal Lows ✔ Fair Value Gaps (FVG) ✔ Strong/Weak Highs + Lows labeling ✔ Trend coloring (optional) ✔ Premium / Discount Zones All plotted with precision. All customizable. All built to remove guesswork. 💹 4. Multi-MA Engine (5 Fully Configurable MAs) ✔ EMA, SMA, WMA, VWMA, SMMA ✔ Choose length, color, and source ✔ Ideal for trend confirmation + dynamic S/R Smooth. Clean. Non-laggy. 📊 5. Enhanced Supertrend (Toggles + Filters) ✔ Switch between Line / Histogram / Hidden ✔ Optional background trend coloring ✔ Buy/Sell signals with trend-change alerts ✔ No repaint Perfect for directional bias. ⚡ 6. Breakout Detection + Volume Confirmation ✔ Auto-detects Support/Resistance Breaks ✔ Confirms breaks through Volume Surge % Oscillator ✔ Detects: Bullish Breaks Bearish Breaks Bullish Rejections Bearish Rejections You instantly know when a breakout is real or fake. 📍 7. VWAP System with Multi-Band Zones ✔ Session-based VWAP ✔ Bands via Std Deviation or % ✔ Clean pullback zones ✔ Perfect for intraday institutions-style precision 🧠 8. Fully Integrated Alerts Alerts for: ✔ BOS / CHoCH (Internal + Swing) ✔ Order Block Breakouts ✔ Equal Highs / Equal Lows ✔ Fair Value Gaps ✔ S/R Zone Interactions ✔ Trend Shifts ✔ Breakouts with Volume Confirmation ✔ Supertrend Reversals And more. Never miss major price shifts again. 🎨 9. Clean UI + Auto-Adaptive Watermark ✔ Auto-contrast watermark ✔ Minimalistic but premium ✔ Chart-friendly colors ✔ Built to match dark or light themes 🌍 Who This Indicator Is For? ✔ Intraday traders ✔ Swing traders ✔ SMC traders ✔ Volume/Order Flow traders ✔ Forex, Crypto, Index & Stocks ✔ Anyone wanting a single all-in-one trading system 🔥 Why 90% Traders Love This System Because it gives you: 🔥 Session Bias 🔥 Volume-backed Zones 🔥 Clean Market Structure 🔥 Trend Bias + Liquidity Areas 🔥 Institutional S/R with Strength Meter 🔥 Accurate Order Flow Reactions Everything you need to trade like top-tier professionals — without needing 10 indicators. 🛒 Get Full Access This premium institutional system is available as part of the Courses Section on the official website. 👉 Purchase the indicator as a Course at: www.ironmindtrader.com Inside the course, you'll get: ✔ Access instructions ✔ Setup guide ✔ Trading rules ✔ Updates included
Pine Script® indicator
by SumitQuants
SUN Signal System Overview – SUN Signal System Free 7-DAY trial is available on request. The SUN Signal System represents an advanced approach to momentum trading, offering adaptive tools to help traders navigate markets effectively. Built on proprietary efficiency ratio calculations and volatility-based filtering techniques, this indicator introduces several powerful features to improve accuracy and adaptability. Whether you trade stocks, Forex, commodities, or cryptocurrencies, SUN Signal System adapts seamlessly to your preferred market and trading style. 📈 SUN Signal System is highly effective across a wide range of market conditions, excelling in both trending and range-bound environments. It serves as a powerful tool for scalping and optimizing trade entries on shorter time frames, while also delivering performance for swing trading strategies. ⚠ IMPORTANT NOTICE - Optimize Your Indicator for Best Results: To fully leverage the power of SUN Signal System, it's essential to adjust and fine-tune the indicator's settings to align with your specific trading style, instrument type, and time frame. Doing so can significantly enhance signal accuracy and overall performance. Key Features Adaptive SUN Line: A proprietary adaptive algorithm that dynamically adjusts to changing market conditions. The efficiency ratio measures directional movement versus total volatility, automatically scaling sensitivity through non-linear power calculations. Turbo Mode Detection: Identifies explosive momentum moves through acceleration analysis. Markers appear when the efficiency ratio accelerates beyond threshold, signaling potential strong directional moves. Reversal Warning System: Markers warn of potential reversals using divergence analysis between price action and momentum exhaustion patterns. Dual Dashboard System: Multi-timeframe signal dashboard (M1/M3/M5/M10/M15) combined with Stochastic RSI dashboard (M5/M15/H1) for comprehensive market overview at a glance. Performance Tracking: Real-time performance metrics including win rate, profit factor, and trade statistics displayed directly on chart for immediate feedback. Areas of Application Type of Indicator: A momentum and trend-following indicator equipped with dynamic filtering capabilities to effectively manage volatility and reduce noise, ensuring precise and actionable signals. Markets: Performs well across all markets and instruments, including stocks, Forex, indices, commodities, or cryptocurrencies. Particularly effective in volatile conditions or trending markets. Time frames: Fully compatible with all time frames, from 1-minute charts to daily charts. Optimal performance on 15-minute and above for trend following. Settings and Customization SUN Signal System's default settings are optimized for general use. However, traders are encouraged to experiment with parameters to maximize effectiveness for their specific trading style and market conditions. Core Parameters: 🔃 Period: Adjusts the analyze period of recent bars. Range: 8-14. Lower values increase sensitivity. Default: 10. 🔃 F: Controls responsiveness to price changes. Range: 2-10. Lower values increase sensitivity for scalping. Default: 2. 🔃 S: Determines smoothing in ranging markets. Range: 20-50. Higher values provide stronger noise filtering. Default: 20. 🔃 P: Adjusts the efficiency ratio scaling. Range: 1.0-3.0. Controls adaptation curve aggressiveness. Default: 0.5 Volatility Intelligence: 🔃 Period: Volatility measurement window. Range: 10-20. Affects signal filtering strictness. Default: 14. 🔃 Strength: Controls signal filtering threshold based on volatility. Range: 30-50. Higher values reduce false signals during low volatility. Default: 30. We encourage you to try these optimized custom settings: Conservative: 18, 3, 30, 0.8, 14, 40 Balanced: 14, 2, 30, 0.5, 14, 35 Aggressive: 10, 1, 20, 0.3, 14, 25 Dashboard Configuration: 🔃 Show Stochastic Dashboard: Toggle Stochastic RSI multi-timeframe display. Default: true. 🔃 Show MTF Dashboard: Toggle multi-timeframe signal dashboard. Default: true. 🔃 Dashboard Position: Choose dashboard placement on chart. Options: Top/Bottom, Left/Right. Additional Features: 🔃 Enable Turbo Mode: Activates momentum acceleration detection. Default: true. Adjust the K & P value to customize the candle range first. Recommended Setting : K = 0.007, P = 0.25. The candle value will show on the dashboard as T. 🔃 Enable Reversal Detection: Activates divergence-based reversal warnings. Default: true. Adjust the K & P value to customize the candle range first. Recommended Setting : K = 0.01, P = 0.2. The candle value will show on the dashboard as R. For Turbo & Reversal setting, 🔃 Show Performance Stats: Displays real-time trade statistics. Default: true. How to Use the Indicator: 1. Apply the Indicator: Add SUN Signal System to your chart, selecting your desired instrument and time frame. Adjust settings to suit your trading strategy. 2. Buy Signals: When a Buy signal appears (green arrow ▲) after validation conditions are met, consider entering a Long position. 3. Sell Signals: When a Sell signal appears (red arrow ▼), consider exiting Long positions or entering Short positions. 4. Turbo Mode: markers indicate momentum acceleration. Use these as confirmation for existing positions or aggressive entry points. 5. Reversal Warnings: Purple triangles suggest potential reversals. Consider taking profits or tightening stops. 6. Dashboard Analysis: Use MTF dashboard to confirm signal alignment across timeframes. Green cells indicate bullish bias, red cells bearish bias. 7. Performance Monitoring: Track win rate and profit factor in real-time to validate your settings effectiveness. IMPORTANT: Always wait for the candlestick to close before acting on a signal to ensure confirmation. Multi-Timeframe Confirmation: - Strong Signal: When 4-5 timeframes align in the MTF dashboard - Moderate Signal: When 3 timeframes align - Weak Signal: When only 1-2 timeframes align Use the Stochastic Dashboard for additional confirmation of overbought/oversold conditions across multiple timeframes. Additional Features Session Highlighting: Visual session boxes for Asian, London, and New York sessions to identify optimal trading periods. Signal Alternation Logic: Built-in protection against consecutive same-direction signals without opposing signal between them. Custom Alerts: Set real-time alerts for Buy, Sell, Turbo, and Reversal signals. Use "Once Per Bar Close" for confirmed signals. Tips for Best Results Adjust Settings for Different Instruments: Forex pairs may require different settings than indices or cryptocurrencies due to varying volatility characteristics. Time Frame Optimization: For scalping (1-5 min), use lower Fast Period values. For swing trading (H1-D1), increase both Fast and Slow periods. Combine with Price Action: Use support/resistance levels and chart patterns to confirm signals. Monitor Performance Stats: If win rate drops below 50%, consider adjusting Power Factor and ATR settings. Volume Confirmation: Although not required, adding volume analysis can improve signal quality. Free 7-DAY trial is available on request. Refer to our website : www.sunsignalsystem.com for free trial subscription and technical handbooks Important Notice ⚠ If you are new to trading and/or technical analysis, it's recommended to start with a demo account until you become familiar with the indicator before applying it to live trades. The SUN Signal System is non-repainting, meaning signals do not change or disappear after the bar closes. While the indicator delivers Buy/Sell signals based on momentum and volatility analysis, it is essential to combine it with solid risk management and other forms of technical analysis. No indicator guarantees success, as markets are influenced by unpredictable events. Risk Disclaimer: Trading involves substantial risk of loss. Past performance does not guarantee future results. This indicator is for educational purposes and should not be the sole basis for trading decisions.
Pine Script® indicator
by SunSignalSystem
Institutional Sessions Volume Order Flow [SumitQuants]Institutional Sessions Volume Order Flow 🔥 Institutional Sessions Volume Order Flow — The all-in-one Pine v6 toolkit that reveals institutional volume order blocks, session structure, VWAP bands and trend ribbon so you can trade with professional conviction. 🎯 See where smart money is active. Institutional Sessions Volume Order Flow surfaces high-volume order blocks, session boxes, VWAP bands, MA ribbon and Supertrend alerts — a single overlay that turns market noise into tradable structure. ⚡📈 ✨ Key Features 📦 Institutional Volume Order Blocks: Detects bullish & bearish order blocks by aggregating volume around local highs/lows and plots filled zones with volume-percent labels. 🕒 Session Boxes & Timeline: Auto session boxes for Asia/ Europe / NewYork / Sydney with merge options, open/close lines, pip/% labels and optional candle coloring. 📉 VWAP with Bands: Multi-anchor VWAP (Session/Week/Month/Quarter/Year/Earnings/Dividends/Splits) plus up to 3 configurable bands (SD or % mode) and fills. 🧭 Moving Average Ribbon: 4-MA ribbon (SMA/EMA/SMMA/WMA/VWMA) for trend structure and dynamic S/R. ⚡ Supertrend Overlay: Optional Supertrend with conditional background fill and built-in trend-change alert hooks. 🔔 Prebuilt Alerts: Supertrend flips, session opens, session new highs/lows — ready for automation or notifications. ⚙️ Deep Customization: Colors, styles, lookback, merge behaviors, band multipliers, anchor periods, session times, label sizes, and more. 🛠 Pine v6 Optimized: Modern, overlay-ready Pine Script v6 implementation suitable for intraday and multi-timeframe use. 🧠 Why Traders Buy It 🔍 Institutional context: Volume-weighted order blocks reveal where large participants acted — crucial for high-probability trade planning. ✅ Stacked confirmation: Ribbon → VWAP → order block filters noise and aligns entries with institutional flow. 🌐 Session clarity: Quickly identify which market session is driving price and volatility. 📣 Actionable alerts: Be notified exactly when setups trigger so you don’t miss transitions. 🧩 Versatile: Great for scalpers, intraday momentum traders, swing traders, prop desks and system developers. 🚀 Quick Start (3 steps) Add Institutional Sessions Volume Order Flow to your chart (Pine v6). Enable Order Blocks + VWAP + Supertrend to begin. Tune session times and band/MA settings for your instrument and timeframe. Use Supertrend + ribbon alignment + zone retest for higher-probability entries. 🎛️ 🧾 Technical Notes & Compatibility 📜 Pine Script v6 — compatible with TradingView’s current scripting environment. 📌 Overlay indicator — draws directly on price chart. 🔔 Alerts use alertcondition hooks for TradingView notifications. 👤 Author: Created and maintained by SumitQuants. ⚠️ Risk Disclaimer This tool provides context and signals — not guarantees. Backtest, paper trade, and use responsible risk management. Past performance is not indicative of future results. 📉 🛒 Call to Action (CTA) Ready to trade with institutional clarity? 👉 Buy Institutional Sessions Volume Order Flow now — or message for a demo, custom tweaks, or a bundle including backtest/strategy code. Quick support and configuration help included. 💬 Reach out to the website and Buy This Indicator in the Courses Section www.ironmindtrader.com
Pine Script® indicator
by SumitQuants
EMA 50/200 Pullback + RSI (BTC/USDT 15m - 2 Bar Logic)I recognize that combining indicators requires clear justification on how the components interact Therefore the new scripts description will explicitly detail the strategys operational logic Objective The strategy is a Trend Following Pullback System designed for high frequency time frames 15m Synergy The EMA50 EMA200 defines the primary Trend Direction Trend Filter It then utilizes a 2 Bar Pullback Logic to find an entry point where the price has momentarily reversed against the trendline and the RSI 14 serves as a Momentum Filter RSI greater than 50 for Long RSI less than 50 for Short to minimize false signals
Pine Script® strategy
by nookloves26
Smart Trend Signal with Bands [wjdtks255]Indicator Description for TradingView Title: Adaptive Trend Kernel Description: The "Adaptive Trend Kernel " is a versatile trend-following and volatility indicator designed to help traders identify dynamic market trends, potential reversals, and price extremes within a channel. Built upon a customized linear regression model, this indicator provides clear visual cues to enhance your trading decisions. Key Features: Regression Line: A central dynamic line representing the core trend direction, calculated based on a user-defined "Regression Length." Regression Bands: Standard deviation-based bands plotted around the Regression Line, which act like a dynamic channel. These bands expand and contract with market volatility, indicating potential overbought/oversold conditions relative to the trend. Trend Reversal Signals: Distinct "Up" (green triangle up) and "Down" (red triangle down) signals are generated when the price (close) crosses over or under the Regression Line. These signals suggest potential shifts in the short-term trend direction. Visual Customization: Highly flexible input options for adjusting line colors, band colors, line width, and panel opacity. Users can toggle the visibility of bands and trend labels to suit their chart preferences. Panel Label: A subtle "Regression" label is dynamically positioned, offering clear context without cluttering the main chart. How it Works: The indicator calculates a linear regression line as the adaptive center of the price movement. Standard deviation is then used to create upper and lower bands, encapsulating typical price fluctuations. Signals are fired when price breaks out of the regression line, suggesting a momentum shift in line with the established trend or a potential reversal. Trading Methods & Strategies Here are some trading strategies you can apply using the "Adaptive Trend Kernel " indicator: Trend-Following with Confirmation: Long Entry: Look for an "Up" signal (green triangle up) when the price is above the Regression Line, especially after a brief retracement towards the line. This confirms that the uptrend is likely resuming. Short Entry: Look for a "Down" signal (red triangle down) when the price is below the Regression Line, especially after a brief rally towards the line. This confirms that the downtrend is likely resuming. Exit Strategy: Consider exiting if an opposite signal appears, or if the price closes outside the opposite band, indicating potential overextension or reversal. Reversal / Counter-Trend Play: Long Entry (Aggressive): When the price approaches or briefly dips below the Lower Regression Band and then generates an "Up" signal (green triangle up). This could indicate a potential bounce from an oversold condition relative to the trend. Short Entry (Aggressive): When the price approaches or briefly moves above the Upper Regression Band and then generates a "Down" signal (red triangle down). This could indicate a potential pullback from an overbought condition relative to the trend. Confirmation: This strategy works best when combined with other reversal confirmation patterns (e.g., bullish/bearish engulfing candlesticks) or divergences in other momentum indicators (like RSI). Volatility Breakout: Entry (Long): After a period of low volatility where the Regression Bands are narrow, observe if the price decisively breaks above the Upper Regression Band and an "Up" signal appears. This suggests a strong bullish momentum breakout. Entry (Short): After a period of low volatility where the Regression Bands are narrow, observe if the price decisively breaks below the Lower Regression Band and a "Down" signal appears. This suggests a strong bearish momentum breakdown. Management: Volatility breakouts can be swift; use appropriate risk management and profit-taking strategies. Important Considerations: Risk Management: Always apply proper stop-loss and take-profit levels. No indicator is infallible. Timeframe Sensitivity: Adjust the "Regression Length" and "Band Multiplier" according to the asset and timeframe you are trading. Shorter lengths might suit scalping, while longer lengths are better for swing trading. Confirmation with Other Tools: For higher conviction trades, use this indicator in conjunction with other technical analysis tools such like volume, MACD, or RSI on an oscillator pane. Backtesting: Always backtest any strategy on historical data to understand its performance characteristics before live trading.
Pine Script® indicator
by wjdtks255
Trinity Dynamic ATR Levels (Saty)This is an updated version of the SATY ATR levels () Trinity Dynamic ATR Levels The core logic is 100 % identical: same higher-timeframe ATR calculation, same trigger at ~23.6 %, same Fibonacci and extension levels, same 8-21-34 EMA ribbon for the trend color in the table, and the table itself looks exactly like the original again (4 rows, clean layout, no extra target row). The visual and usability upgrades you now have that the original does not: Lower Trigger line is now red instead of yellow, Upper Trigger line is now green instead of aqua/cyan to indicate to go long or short. Every single level group has its own color input so you can customize everything (previous close, fib levels, 61.8 %, 100 % ATR, extensions, 200 %, 300 %, etc.) without touching the code. Every plotted level now has a clear text label on the right side of the chart (“Prev Close”, “Lower Trig”, “Upper Trig”, “-61.8 %”, “+100 %”, “-200 %”, etc.) so you instantly know what you’re looking at. A new input called “Target Distance (×ATR)” lets you decide how far your profit target is (default 1.0 = +100 % ATR, but you can set 1.618, 2.0, 2.618, etc. instantly). As soon as price closes above the Upper Trigger or below the Lower Trigger, a big, obvious target box automatically appears on the right side of the screen showing the exact dollar target price for the active long or short (green box for longs, red box for shorts). When there is no active trigger, the box disappears and the table stays perfectly clean. In short, you now have the exact same beloved Saty ATR indicator everyone uses, but with red/green triggers, full color control, level labels, and a beautiful dynamic target box that only shows up when you actually have a trade on — all while keeping the original clean 4-row table untouched. It’s the cleanest and most professional version you’ll find anywhere. Enjoy! 🚀
Pine Script® indicator
by EMA34TRADER
8
EMA Cross Strategy v5 (30 lots) (15 min candle only)- safe flip🚀 EMA Cross Strategy v5 (30 Lots) (15 min candle only)— Safe Flip Edition Fully Automated | Fast | Reliable | Battle-tested Welcome to a clean, powerful, and automation-friendly EMA crossover system. This strategy is built for traders who want consistent trend-based entries without the risk of unwanted pyramiding or doubled positions. 🔥 How It Works This strategy uses a fast EMA (10) crossing a slow EMA (20) to detect trend shifts: Bullish Crossover → LONG (30 lots) Bearish Crossover → SHORT (30 lots) Every opposite signal safely flips the position by first closing the current trade, then opening a fresh position of exactly 30 lots. No doubling. No runaway position size. No surprises. Just clean, mechanical trend-following. 📈 Why This Strategy Stands Out Unlike basic EMA crossbots, this version: ✔ Prevents unintended pyramiding ✔ Never over-allocates capital ✔ Works perfectly with webhook-based automation ✔ Produces stable, systematic entries ✔ Executes directional flips with precision 🔍 Backtest Highlights (1-Year) (Backtests will vary by instrument/timeframe) 1,500+ trades executed Profit factor above 1.27 Strong trend performance Balanced long/short behavior No margin calls Consistent trade execution This strategy thrives in trending markets and maintains strict discipline even in choppy conditions. ⚙️ Automation Ready Designed for automated execution via webhook and API setups on supported platforms. Just connect, run, and let the bot follow the rules without hesitation. No emotions. No overtrading. No fear or greed. Pure logic.
Pine Script® strategy
by kulkarniabhishek38
Argentina Price per m² (USD) — (1999–2025)Overview This indicator plots the historical USD price per square meter of apartments in CABA (Buenos Aires City), Argentina, combining annual data (1999–2011) from Maure Real Estate Market Reports with monthly data (2012–2025) from UCEMA and private market sources. All values were manually digitized, cleaned, and consolidated to reconstruct the most complete long-term pricing series publicly available. The script also includes SMA20, SMA50, and SMA100 over the custom dataset to support long-term trend analysis, cycle detection, and macro technical structure. Data Sources 1999–2011 (Annual): Maure Real Estate Market Reports 2012–2020 (Monthly): UCEMA Real Estate Index 2020–2025 (Monthly): RE/MAX – UCEMA Market Monitor How to Use This Indicator This tool allows investors, developers, and analysts to: Identify multiyear trend shifts Compare cycles vs. Argentine macro environments Map long-term support/resistance zones in real estate Detect early signs of market recovery or contraction Combine real estate fundamentals with technical analysis The SMAs help visualize structural trends normally hidden in real estate data. About This Work This series was fully reconstructed and coded by engineer Francisco Michelich (@esFranMiche on X), combining market research, statistical consolidation, and technical analysis. It is intended as an analytical tool, not an official financial index. If you find this useful, feel free to follow and connect — feedback and collaboration are welcome. Linkedin X
Pine Script® indicator
by mitchfm
Golden Cross 50/200 EMATrend-following systems are characterized by having a low win rate, yet in the right circumstances (trending markets and higher timeframes) they can deliver returns that even surpass those of systems with a high win rate. Below, I show you a simple bullish trend-following system with clear execution rules: System Rules -Long entries when the 50-period EMA crosses above the 200-period EMA. -Stop Loss (SL) placed at the lowest low of the 15 candles prior to the entry candle. -Take Profit (TP) triggered when the 50-period EMA crosses below the 200-period EMA. Risk Management -Initial capital: $10,000 -Position size: 10% of capital per trade -Commissions: 0.1% per trade Important Note: In the code, the stop loss is defined using the swing low (15 candles), but the position size is not adjusted based on the distance to the stop loss. In other words, 10% of the equity is risked on each trade, but the actual loss on the trade is not controlled by a maximum fixed percentage of the account — it depends entirely on the stop loss level. This means the loss on a single trade could be significantly higher or lower than 10% of the account equity, depending on volatility. Implementing leverage or reducing position size based on volatility is something I haven’t been able to include in the code, but it would dramatically improve the system’s performance. It would fix a consistent percentage loss per trade, preventing losses from fluctuating wildly with changes in volatility. For example, we can maintain a fixed loss percentage when volatility is low by using the following formula: Leverage = % of SL you’re willing to risk / % volatility from entry point to stop loss And when volatility is high and would exceed the fixed percentage we want to expose per trade (if the SL is hit), we could reduce the position size accordingly. Practical example: Imagine we only want to risk 15% of the position value if the stop loss is triggered on Tesla (which has high volatility), but the distance to the SL represents a potential 23.57% drop. In this case, we subtract the desired risk (15%) from the actual volatility-based loss (23.57%): 23.57% − 15% = 8.57% Now suppose we normally use $200 per trade. To calculate 8.57% of $200: 200 × (8.57 / 100) = $17.14 Then subtract that amount from the original position size: $200 − $17.14 = $182.86 In summary: If we reduce the position size to $182.86 (instead of the usual $200), even if Tesla moves 23.57% against us and hits the stop loss, we would still only lose approximately 15% of the original $200 position — exactly the risk level we defined. This way, we strictly respect our risk management rules regardless of volatility swings. I hope this clearly explains the importance of capping losses at a fixed percentage per trade. This keeps risk under control while maintaining a consistent percentage of capital invested per trade — preventing both statistical distortion of the system and the potential destruction of the account. About the code: Strategy declaration: The strategy is named 'Golden Cross 50/200 EMA'. overlay=true means it will be drawn directly on the price chart. initial_capital=10000 sets the initial capital to $10,000. default_qty_type=strategy.percent_of_equity and default_qty_value=10 means each trade uses 10% of available equity. margin_long=0 indicates no margin is used for long positions (this is likely for simulation purposes only; in real trading, margin would be required). commission_type=strategy.commission.percent and commission_value=0.1 sets a 0.1% commission per trade. Indicators: Calculates two EMAs: a 50-period EMA (ema50) and a 200-period EMA (ema200). Crossover detection: bullCross is triggered when the 50-period EMA crosses above the 200-period EMA (Golden Cross). bearCross is triggered when the 50-period EMA crosses below the 200-period EMA (Death Cross). Recent swing: swingLow calculates the lowest low of the previous 15 periods. Stop Loss: entryStopLoss is a variable initialized as na (not available) and is updated to the current swingLow value whenever a bullCross occurs. Entry and exit conditions: Entry: When a bullCross occurs, the initial stop loss is set to the current swingLow and a long position is opened. Exit on opposite signal: When a bearCross occurs, the long position is closed. Exit on stop loss: If the price falls below entryStopLoss while a position is open, the position is closed. Visualization: Both EMAs are plotted (50-period in blue, 200-period in red). Green triangles are plotted below the bar on a bullCross, and red triangles above the bar on a bearCross. A horizontal orange line is drawn that shows the stop loss level whenever a position is open. Alerts: Alerts are created for:Long entry Exit on bearish crossover (Death Cross) Exit triggered by stop loss Favorable Conditions: Tesla (45-minute timeframe) June 29, 2010 – November 17, 2025 Total net profit: $12,458.73 or +124.59% Maximum drawdown: $1,210.40 or 8.29% Total trades: 107 Winning trades: 27.10% (29/107) Profit factor: 3.141 Tesla (1-hour timeframe) June 29, 2010 – November 17, 2025 Total net profit: $7,681.83 or +76.82% Maximum drawdown: $993.36 or 7.30% Total trades: 75 Winning trades: 29.33% (22/75) Profit factor: 3.157 Netflix (45-minute timeframe) May 23, 2002 – November 17, 2025 Total net profit: $11,380.73 or +113.81% Maximum drawdown: $699.45 or 5.98% Total trades: 134 Winning trades: 36.57% (49/134) Profit factor: 2.885 Netflix (1-hour timeframe) May 23, 2002 – November 17, 2025 Total net profit: $11,689.05 or +116.89% Maximum drawdown: $844.55 or 7.24% Total trades: 107 Winning trades: 37.38% (40/107) Profit factor: 2.915 Netflix (2-hour timeframe) May 23, 2002 – November 17, 2025 Total net profit: $12,807.71 or +128.10% Maximum drawdown: $866.52 or 6.03% Total trades: 56 Winning trades: 41.07% (23/56) Profit factor: 3.891 Meta (45-minute timeframe) May 18, 2012 – November 17, 2025 Total net profit: $2,370.02 or +23.70% Maximum drawdown: $365.27 or 3.50% Total trades: 83 Winning trades: 31.33% (26/83) Profit factor: 2.419 Apple (45-minute timeframe) January 3, 2000 – November 17, 2025 Total net profit: $8,232.55 or +80.59% Maximum drawdown: $581.11 or 3.16% Total trades: 140 Winning trades: 34.29% (48/140) Profit factor: 3.009 Apple (1-hour timeframe) January 3, 2000 – November 17, 2025 Total net profit: $9,685.89 or +94.93% Maximum drawdown: $374.69 or 2.26% Total trades: 118 Winning trades: 35.59% (42/118) Profit factor: 3.463 Apple (2-hour timeframe) January 3, 2000 – November 17, 2025 Total net profit: $8,001.28 or +77.99% Maximum drawdown: $755.84 or 7.56% Total trades: 67 Winning trades: 41.79% (28/67) Profit factor: 3.825 NVDA (15-minute timeframe) January 3, 2000 – November 17, 2025 Total net profit: $11,828.56 or +118.29% Maximum drawdown: $1,275.43 or 8.06% Total trades: 466 Winning trades: 28.11% (131/466) Profit factor: 2.033 NVDA (30-minute timeframe) January 3, 2000 – November 17, 2025 Total net profit: $12,203.21 or +122.03% Maximum drawdown: $1,661.86 or 10.35% Total trades: 245 Winning trades: 28.98% (71/245) Profit factor: 2.291 NVDA (45-minute timeframe) January 3, 2000 – November 17, 2025 Total net profit: $16,793.48 or +167.93% Maximum drawdown: $1,458.81 or 8.40% Total trades: 172 Winning trades: 33.14% (57/172) Profit factor: 2.927
Pine Script® strategy
by Especulador96
6
7 EMA Cross StrategyKhanaal Traders.7 EMA Cross Strategy is a visual tool designed to display a structured group of seven Exponential Moving Averages (EMAs) and highlight moments when these averages form specific alignment conditions. The script supports two optional interpretation modes: • A sequential alignment mode, where EMAs arrange themselves in order relative to one another. • A multi-step pattern mode, where the chart price interacts with all EMAs while alignment is present. The script includes adjustable periods for each EMA, customizable colors, and optional multi-timeframe filtering, allowing users to compare alignment conditions between a higher timeframe and the chart’s timeframe. It also provides optional markers that appear when alignment begins, when alignment is lost and regained, or when repetitive markers are allowed. Additional features include: • Individual EMA visibility toggles • Background highlighting based on alignment conditions • Optional retest-based marker behavior • Optional alert conditions tied to alignment events This tool is intended to help users observe EMA structure, visualize trend organization, and study how multiple EMAs behave together across different timeframes.
Pine Script® indicator
by Shahzad9272
Advanced Intraday Darvas BoxThis indicator applies a modern Darvas Box strategy for intraday traders, using non-repainting pivot detection combined with strong filters to reduce chart noise: Confirmed swing highs and lows: Boxes only form when genuine swing pivots appear, ensuring fully non-repainting signals. Minimum box height: Small, "noise" boxes are filtered out using ATR multiples for meaningful zones. Trend filter: Choose EMA, SMA, or VWAP to lock boxes and breakouts to market direction. Volume confirmation: Boxes are only confirmed when volume is above a user-defined threshold, highlighting high-participation moves. Breakout filter: Signals trigger only if the breakout candle closes substantially beyond the box, reducing false breakouts. Limited box display: Recent boxes only, keeping your chart clean and readable. Features & Inputs Pivot sensitivity: Set the number of bars for swing calculation. Box filtering: Specify the minimum ATR multiple for box size. Trend selection: EMA, SMA, VWAP, or None. Volume filter & threshold: Activate for greater breakout confidence. Breakout/Breakdown strength: Set how far price must close beyond the box to signal power. Maximum boxes: Control the number of active boxes to keep the chart clear. How to Add and Use Add to Chart: Click the “Add to Favorite Scripts” star to mark this indicator. Open your desired intraday chart (1m–30m works best). Click “Indicators,” search for “Advanced Intraday Darvas Box,” and add to your chart. Customize Inputs: Use the settings gear ⚙️ to adjust pivot sensitivity, trend logic, box filtering, and volume confirmation. Lower minimum box height or pivot length for more frequent signals. Raise them for sparser, higher conviction setups. Reading Darvas Boxes: Box Edges: Horizontal lines mark resistance (top) and support (bottom) of detected zones. Shaded regions: Highlight the most relevant trading zones and where price could coil before breakout. Breakout labels (↑/↓): These appear only when price makes a powerful, confirmed move beyond the box edge—aligned with trend. Alerts: Turn on chart alerts using the “Strong Bullish Breakout” or “Strong Bearish Breakdown” alert conditions for automated signal monitoring. Best Practices: Use Darvas boxes to complement price action analysis. Combine with candlestick patterns, volume spikes, and other price structure. Only trade strong breakout signals confirmed by volume and market direction. Avoid excessive boxes—adjust "Max Boxes" and filters for your instrument and timeframe. Important This indicator is non-repainting and built for display clarity and clean signals. No brokerage automation, no external linking, and pure price/volume logic—fully compliant with TradingView House Rules. Always test settings and confirmations before using for live decision-making.
Pine Script® indicator
by darshakssc
EMAs-SMAs[Pacote]//@version=5 indicator("EMAs-SMAs ", overlay=true) // Fonte src = input.source(close, "Fonte (source)") // ============================== // EMAs // ============================== ema3 = ta.ema(src, 3) ema4 = ta.ema(src, 4) ema5 = ta.ema(src, 5) ema7 = ta.ema(src, 7) ema9 = ta.ema(src, 9) ema17 = ta.ema(src, 17) ema18 = ta.ema(src, 18) ema21 = ta.ema(src, 21) ema34 = ta.ema(src, 34) ema40 = ta.ema(src, 40) ema50 = ta.ema(src, 50) ema55 = ta.ema(src, 55) ema72 = ta.ema(src, 72) ema80 = ta.ema(src, 80) ema96 = ta.ema(src, 96) ema100 = ta.ema(src, 100) ema200 = ta.ema(src, 200) plot(ema3, "EMA 3", color=color.new(color.blue, 0), linewidth=2) plot(ema4, "EMA 4", color=color.new(color.red, 0), linewidth=2) plot(ema5, "EMA 5", color=color.new(color.green, 0), linewidth=2) plot(ema7, "EMA 7", color=color.new(color.orange, 0), linewidth=2) plot(ema9, "EMA 9", color=color.new(color.orange, 0), linewidth=2) plot(ema17, "EMA 17", color=color.new(color.blue, 0), linewidth=2) plot(ema18, "EMA 18", color=color.new(color.red, 0), linewidth=2) plot(ema21, "EMA 21", color=color.new(color.green, 0), linewidth=2) plot(ema34, "EMA 34", color=color.new(color.orange, 0), linewidth=2) plot(ema40, "EMA 40", color=color.new(color.orange, 0), linewidth=2) plot(ema50, "EMA 50", color=color.new(color.blue, 0), linewidth=2) plot(ema55, "EMA 55", color=color.new(color.red, 0), linewidth=2) plot(ema72, "EMA 72", color=color.new(color.green, 0), linewidth=2) plot(ema80, "EMA 80", color=color.new(color.orange, 0), linewidth=2) plot(ema96, "EMA 96", color=color.new(color.orange, 0), linewidth=2) plot(ema100, "EMA 100", color=color.new(color.blue, 0), linewidth=2) plot(ema200, "EMA 200", color=color.new(color.red, 0), linewidth=2) // ============================== // SMAs // ============================== sma3 = ta.sma(src, 3) sma4 = ta.sma(src, 4) sma5 = ta.sma(src, 5) sma7 = ta.sma(src, 7) sma9 = ta.sma(src, 9) sma17 = ta.sma(src, 17) sma18 = ta.sma(src, 18) sma21 = ta.sma(src, 21) sma34 = ta.sma(src, 34) sma40 = ta.sma(src, 40) sma50 = ta.sma(src, 50) sma55 = ta.sma(src, 55) sma72 = ta.sma(src, 72) sma80 = ta.sma(src, 80) sma96 = ta.sma(src, 96) sma100 = ta.sma(src, 100) sma200 = ta.sma(src, 200) plot(sma3, "SMA 3", color=color.new(color.blue, 60), linewidth=1, style=plot.style_line) plot(sma4, "SMA 4", color=color.new(color.red, 60), linewidth=1, style=plot.style_line) plot(sma5, "SMA 5", color=color.new(color.green, 60), linewidth=1, style=plot.style_line) plot(sma7, "SMA 7", color=color.new(color.orange, 60), linewidth=1, style=plot.style_line) plot(sma9, "SMA 9", color=color.new(color.orange, 60), linewidth=1, style=plot.style_line) plot(sma17, "SMA 17", color=color.new(color.orange, 60), linewidth=1, style=plot.style_line) plot(sma18, "SMA 18", color=color.new(color.orange, 60), linewidth=1, style=plot.style_line) plot(sma21, "SMA 21", color=color.new(color.orange, 60), linewidth=1, style=plot.style_line) plot(sma34, "SMA 34", color=color.new(color.orange, 60), linewidth=1, style=plot.style_line) plot(sma40, "SMA 40", color=color.new(color.orange, 60), linewidth=1, style=plot.style_line) plot(sma50, "SMA 50", color=color.new(color.orange, 60), linewidth=1, style=plot.style_line) plot(sma55, "SMA 55", color=color.new(color.orange, 60), linewidth=1, style=plot.style_line) plot(sma72, "SMA 72", color=color.new(color.orange, 60), linewidth=1, style=plot.style_line) plot(sma80, "SMA 80", color=color.new(color.orange, 60), linewidth=1, style=plot.style_line) plot(sma96, "SMA 96", color=color.new(color.orange, 60), linewidth=1, style=plot.style_line) plot(sma100, "SMA 100", color=color.new(color.orange, 60), linewidth=1, style=plot.style_line) plot(sma200, "SMA 200", color=color.new(color.orange, 60), linewidth=1, style=plot.style_line)
Pine Script® indicator
by marcelo-pradorosa